straw briquette machine/0086-15803871119
1.CE Certification
2.Hot sale in Europe
3.Easy operation
straw briquette machine/0086-15803871119
S
traw fuel can replace the wood, coal and Liquefied gas, etc., widely used in Living stove, heating furnace, hot water boilers, industrial boilers, biomass power plant and so on.
This machine shows the advantages of high automaticity, low electricity consumption, low price, high capacity and easy movable operation. And diesel engine is available.
Raw materials: All kinds of straw materials, just like crop stalks, wheat straw, grass, powder materials and ≤50mm diameter solid materials.
Saturday, February 12, 2011
straw briquette machine
1. Energy-saving
2. Environmental protection
3. Straw recovery
Suitable material:
rice hull, rice straw, peanut shell, corn stalks, cotton straw, and other kinds of straw and chaff.
Suitable enegy:
electric power
Main parameters:
Motor Power(kw): 15
Capactiy(kg/h): 300-700
Size and shape forming(mm): Dia.32 (Strip Type)
Material moisture content: 10-20%
Unserviceable stores length (mm): 3---50
Machine dimension(mm): 1700×80×1400
Machine weight (t / units): 0.8
2. Environmental protection
3. Straw recovery
Suitable material:
rice hull, rice straw, peanut shell, corn stalks, cotton straw, and other kinds of straw and chaff.
Suitable enegy:
electric power
Main parameters:
Motor Power(kw): 15
Capactiy(kg/h): 300-700
Size and shape forming(mm): Dia.32 (Strip Type)
Material moisture content: 10-20%
Unserviceable stores length (mm): 3---50
Machine dimension(mm): 1700×80×1400
Machine weight (t / units): 0.8
straw briquette machine
straw briquette machine
1.CE Certification
2.Hot sale in Europe
3.Long life
straw
briquette
machine
Briquette ExtruderHongji charcoal/biomass briquette press can process any kinds of agro-forestry wastes into renewable bio-fuel. Biomass briquette press can make 30-90 mm solid, cylindrical or square fuel briquettes.
The briquette materials can be wood chips, sawdust, branches, rice husk, rice straw, cotton stalk, cottonseed skins, wood, wood shavings, wood chips, mustard stalk, wheat straw, soybeans husk, coffee husk, sunflower husk, peanut-shell, sugar cane bagasse, maize stalk, palm fruit bunch , paddy straw , tobacco waste, bamboo dust and any other crop wastes.
Biomass briquetting is the process of converting substantial biomass wastes into high density and energy concentrated bio fuel briquettes. Biomass briquettes are one kind of ultimate green energy source of renewable energy. And the biomass briquettes are non-conventional source of energy, renewable in nature, eco-friendly, non-polluting and economical. In the whole process no binders and chemicals are needed, 100% natural ensured. The higher density, the higher heating value, the biomass briquettes calorific value is up to 3000-4000 Cal/kg. Compared with fire wood and loose biomass, the briquettes show much higher heat because of lower moisture and higher density.
Biomass briquettes are widely used in boilers, refractory, chemicals, home heating, etc. They become more and more popular as fuel all over the world.
Flowchart of the Biomass Briquette Press Technology:
Crushing---drying---briquetting---carbonizing---final products
Hongji biomass/charcoal briquette Press is equipped with automatic temperature controlling system. The final briquettes are cylindrical or square, whose diameter range is 30-90 mm. The main parts include forming mould, propeller, inner sleeve and heating circle. Huifeng biomass briquette press can be operated 24 hours a day.
Characteristic
s
1. The processed materials diameter must be at 3-5 mm.
2. Use the advanced hot air drying system, the moisture of the raw materials is controlled in 8-12%.
3. No need to use binder and noxious chemical.
4. Screw type briquetting press.
Briquette press Models
Model
BJ-I
BJ-II
BJ-III
Capacity ( kg/h)
120-150
120-150
250-300
Motor Power (kw)
15
11
22
Net/Gross Weight(kg)
540/590
650/700
1080/1180
package dimension(m)
1.8X0.76X1.29
1.8X0.76X1.29
2.02X0.87X1.5
Diameter of finished products (mm)
30, 40, 50
30, 40, 50
60,70,80
1.CE Certification
2.Hot sale in Europe
3.Long life
straw
briquette
machine
Briquette ExtruderHongji charcoal/biomass briquette press can process any kinds of agro-forestry wastes into renewable bio-fuel. Biomass briquette press can make 30-90 mm solid, cylindrical or square fuel briquettes.
The briquette materials can be wood chips, sawdust, branches, rice husk, rice straw, cotton stalk, cottonseed skins, wood, wood shavings, wood chips, mustard stalk, wheat straw, soybeans husk, coffee husk, sunflower husk, peanut-shell, sugar cane bagasse, maize stalk, palm fruit bunch , paddy straw , tobacco waste, bamboo dust and any other crop wastes.
Biomass briquetting is the process of converting substantial biomass wastes into high density and energy concentrated bio fuel briquettes. Biomass briquettes are one kind of ultimate green energy source of renewable energy. And the biomass briquettes are non-conventional source of energy, renewable in nature, eco-friendly, non-polluting and economical. In the whole process no binders and chemicals are needed, 100% natural ensured. The higher density, the higher heating value, the biomass briquettes calorific value is up to 3000-4000 Cal/kg. Compared with fire wood and loose biomass, the briquettes show much higher heat because of lower moisture and higher density.
Biomass briquettes are widely used in boilers, refractory, chemicals, home heating, etc. They become more and more popular as fuel all over the world.
Flowchart of the Biomass Briquette Press Technology:
Crushing---drying---briquetting---carbonizing---final products
Hongji biomass/charcoal briquette Press is equipped with automatic temperature controlling system. The final briquettes are cylindrical or square, whose diameter range is 30-90 mm. The main parts include forming mould, propeller, inner sleeve and heating circle. Huifeng biomass briquette press can be operated 24 hours a day.
Characteristic
s
1. The processed materials diameter must be at 3-5 mm.
2. Use the advanced hot air drying system, the moisture of the raw materials is controlled in 8-12%.
3. No need to use binder and noxious chemical.
4. Screw type briquetting press.
Briquette press Models
Model
BJ-I
BJ-II
BJ-III
Capacity ( kg/h)
120-150
120-150
250-300
Motor Power (kw)
15
11
22
Net/Gross Weight(kg)
540/590
650/700
1080/1180
package dimension(m)
1.8X0.76X1.29
1.8X0.76X1.29
2.02X0.87X1.5
Diameter of finished products (mm)
30, 40, 50
30, 40, 50
60,70,80
straw briquetting machine
1. Energy-saving
2. Environmental protection
3. Straw recovery
Suitable material
: rice hull, rice straw, peanut shell, corn stalks, cotton straw, and other kinds of straw and chaff.
Suitable enegy
: electric power
Main parameters:
Motor Power(kw): 22
Capactiy(kg/h): 1600-1800
Size and shape forming(mm): Dia.33 (Round Type)
Material moisture content: 10-20%
Unserviceable stores length (mm): 3---60
Machine dimension(mm): 1800×90×1680
Machine weight (t / units): 1.5
2. Environmental protection
3. Straw recovery
Suitable material
: rice hull, rice straw, peanut shell, corn stalks, cotton straw, and other kinds of straw and chaff.
Suitable enegy
: electric power
Main parameters:
Motor Power(kw): 22
Capactiy(kg/h): 1600-1800
Size and shape forming(mm): Dia.33 (Round Type)
Material moisture content: 10-20%
Unserviceable stores length (mm): 3---60
Machine dimension(mm): 1800×90×1680
Machine weight (t / units): 1.5
48v 40ah lifepo4 electric golf car battery packs
1.high quality, fast charging
2.battery got CE certification
3.without memory effects over 2000cycles
4.environment friendly
Battery model
48V40AH
Nominal voltage
48V
Battery capacity
40AH
Operating current
40A
Charge voltage
57V
Size
L385*w205*H165mm
Weight
About 25kg
Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers’requirement, for further information please feel free to contact us.
2.battery got CE certification
3.without memory effects over 2000cycles
4.environment friendly
Battery model
48V40AH
Nominal voltage
48V
Battery capacity
40AH
Operating current
40A
Charge voltage
57V
Size
L385*w205*H165mm
Weight
About 25kg
Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers’requirement, for further information please feel free to contact us.
straw fuel briquette machine output: 1t/h
straw fuel briquette machine Parameters:
1. Power: 22kw
2. Output: 1t/h
3. Quality warranty: one year
1. straw fuel briquette machine Description :
This equipment is suitable for various kinds of materials which the moisture
content is less than 30%.The machine is fully automatic electric heating, can
adjust the humidity of materials to address problems of congestion and not
forming. The machine has advantage of simple structure, easy operation, high
automation, and less labor.
2. Final Products
Straw coal is a kind of new-style energy with renewable, environmental
protection, biomass clean and low cost. It is widely used of heating, hotels,
restaurants, bath as heat source, solved the problem of the coal boiler
environmental protection, and solved the problem of higher industry fuel
costs.
The finished products takes on the burning behaviour of coal. Owing to their
great density the straw fuel have a calorific value than the same quantity of
firewood. They can be used instead of coal or wood soild-fuel stoves as well
as in industrial furmaces. The product of this machine can be used to heat
boiler, fireplace, etc. for warm in house.
3. Machine advantages:
As a professional manufacturer we are leading a team working to exploit
full set of manufacturing and exporting briquetting equipments. It can convert
biomass raw material and solid waste into high density and energy fuel.
Biomass Briquetting machine are renewable, eco-friendly for agricultural
countries.This machine can make different diameter and different shape from
biomass and agro-forest waste. It shows the features of big capacity, low
energy consumption, compact and durable.
1. Power: 22kw
2. Output: 1t/h
3. Quality warranty: one year
1. straw fuel briquette machine Description :
This equipment is suitable for various kinds of materials which the moisture
content is less than 30%.The machine is fully automatic electric heating, can
adjust the humidity of materials to address problems of congestion and not
forming. The machine has advantage of simple structure, easy operation, high
automation, and less labor.
2. Final Products
Straw coal is a kind of new-style energy with renewable, environmental
protection, biomass clean and low cost. It is widely used of heating, hotels,
restaurants, bath as heat source, solved the problem of the coal boiler
environmental protection, and solved the problem of higher industry fuel
costs.
The finished products takes on the burning behaviour of coal. Owing to their
great density the straw fuel have a calorific value than the same quantity of
firewood. They can be used instead of coal or wood soild-fuel stoves as well
as in industrial furmaces. The product of this machine can be used to heat
boiler, fireplace, etc. for warm in house.
3. Machine advantages:
As a professional manufacturer we are leading a team working to exploit
full set of manufacturing and exporting briquetting equipments. It can convert
biomass raw material and solid waste into high density and energy fuel.
Biomass Briquetting machine are renewable, eco-friendly for agricultural
countries.This machine can make different diameter and different shape from
biomass and agro-forest waste. It shows the features of big capacity, low
energy consumption, compact and durable.
straw fuel briquette machine output: 1t/h
Equipment Parameters:
1. Power: 22kw
2. Output: 1t/h
3. Quality warranty: one year
1. Brief Intro:
Straw fuel briquette machine is a full set of mechanized production equipment. It can convert biomass raw material and solid waste into high density and energy fuel. Straw fuel briquette machine is widely used in household stove, heating furnace, hot water boilers, industrial boilers, etc. The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
Equipment Parameters:
1). Power: 22kw
2). Output: 1t/h
3). Overall dimension: 2000*900*1500(mm)
4). Equipment weight: 1.3t
5). Quality warranty: 1 year
2. Product Description:
Straw coal is a kind of new-style energy with renewable, environmental protection, biomass clean and low cost. It is widely used of heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coal boiler environmental protection, and solved the problem of higher industry fuel costs.
Straw coal parameters:
1). Length of raw materials: 2-90mm
2). Moisture content of raw materials: 5-30%
3). Product shape: diameter 6~60mm
4). Product density : 0.9-1.4 g/cm3
5). Calorie :3500-5500 kcal
6). Ash: 1.1% max
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furnaces.
This equipment is suitable for various kinds of materials whose moisture content is less than 30%.The machine is fully automatic electric heating, can adjust the humidity of materials to address problems of congestion and not forming. The machine has advantage of simple structure, easy operation, high automation, and less labor.
Wood pellets fuel(Bio-energy) is higher density biological grain fuel, which is made of waste sawdust, wood shavings, lath, end cutting, broken lumber core, leftover materials as well as defective and small fuel wood after crushing, screening, drying. We have wood pellets both for home use and for industrial use. Meanwhile, we have other kinds of biomass pellets for sale. Please contact us freely if you are interested in any product.
3. Our advantages
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc.
Machine advantages:
Biomass briquetting machine can pressed all kinds of biomass materials in to straw fuel whose burning value is highly increased.
Biomass Briquetting machine are renewable, eco-friendly for agricultural countries.
This machine can make different diameter and different shape from biomass and agro-forest waste.
This machine shows the features of big capacity, low energy consumption, compact and durable.
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furmaces.
The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
1. Power: 22kw
2. Output: 1t/h
3. Quality warranty: one year
1. Brief Intro:
Straw fuel briquette machine is a full set of mechanized production equipment. It can convert biomass raw material and solid waste into high density and energy fuel. Straw fuel briquette machine is widely used in household stove, heating furnace, hot water boilers, industrial boilers, etc. The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
Equipment Parameters:
1). Power: 22kw
2). Output: 1t/h
3). Overall dimension: 2000*900*1500(mm)
4). Equipment weight: 1.3t
5). Quality warranty: 1 year
2. Product Description:
Straw coal is a kind of new-style energy with renewable, environmental protection, biomass clean and low cost. It is widely used of heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coal boiler environmental protection, and solved the problem of higher industry fuel costs.
Straw coal parameters:
1). Length of raw materials: 2-90mm
2). Moisture content of raw materials: 5-30%
3). Product shape: diameter 6~60mm
4). Product density : 0.9-1.4 g/cm3
5). Calorie :3500-5500 kcal
6). Ash: 1.1% max
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furnaces.
This equipment is suitable for various kinds of materials whose moisture content is less than 30%.The machine is fully automatic electric heating, can adjust the humidity of materials to address problems of congestion and not forming. The machine has advantage of simple structure, easy operation, high automation, and less labor.
Wood pellets fuel(Bio-energy) is higher density biological grain fuel, which is made of waste sawdust, wood shavings, lath, end cutting, broken lumber core, leftover materials as well as defective and small fuel wood after crushing, screening, drying. We have wood pellets both for home use and for industrial use. Meanwhile, we have other kinds of biomass pellets for sale. Please contact us freely if you are interested in any product.
3. Our advantages
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc.
Machine advantages:
Biomass briquetting machine can pressed all kinds of biomass materials in to straw fuel whose burning value is highly increased.
Biomass Briquetting machine are renewable, eco-friendly for agricultural countries.
This machine can make different diameter and different shape from biomass and agro-forest waste.
This machine shows the features of big capacity, low energy consumption, compact and durable.
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furmaces.
The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
straw molding machine
Straw molding machine
1.saves electric and labor.
2.convenient operation
3.covers less place
Straw molding machine
This series of machines has been developed in order to solve the utilization problems of straw resources in Chinese vast rural areas. The successful trial-manufacture of the straw fuel molding Machine not only avoids a large number of the waste straw burning in the fields, protects the environment, but also develops the renewable energy. The molding fuel compares with the ordinary coal, the heating volume is nearly the same, and it is fast to light fire, big fire intensity, long burning time and burning completely, it is an ideal clean fuel. It has reliable performance, easy and convenient operation. This machine is adapted to a wide range of raw materials, such as corn, straw, peanut shell, bean straw, flower crops and other kinds of inflammable waste crop stalks.
Product characteristics, uses and application ranges:
Firstly, the design of the product is reasonable, manufacturing quality is reliable, it is figured with the simple structure, convenient operation, small size, and covers less place, saves electric and labor.
Secondly, the design of automatic controlling electric heating device can regulate material humidity randomly to ensure the stability of molding material, improve the work efficiency.
Thirdly, the main components of the machine adopt abrasion-resistance material which has been specially processed, so it can produce continuously, durable.
Fourthly, be especially adaptable for molding a variety of biomass raw materials (maize straw, wheat straw, cotton rod, straw, rice husk, peanut shell, corn cob, twigs, leaves, sawdust, etc).
Technical parameters
Technical parameters
Type
JGY-10
JGY-15
JGY-20
JGY-30
Motor power
(kw)
11-15
15-18.5
18.5-22
30-37
Output(kg/h)
500-900
900-1500
1500-2000
2500-3000
Size and Shape
32X32 Cubic
strip
32round
33 round
33 round
Solid forming
density (g/cm3)
0.8-1.4
0.8-1.4
0.8-1.4
0.8-1.4
Material
Moisture (%)
10-25
10-30
10-30
10-30
Materials
Length(mm)
3-50
3-60
3-60
3-60
Overall
dimension(mm)
1700x800x1400
1800x900x1660
1800x900x1680
2000x1000x1700
Total weight
(T / Units)
0.8
1.38
1.54
1.94
1.saves electric and labor.
2.convenient operation
3.covers less place
Straw molding machine
This series of machines has been developed in order to solve the utilization problems of straw resources in Chinese vast rural areas. The successful trial-manufacture of the straw fuel molding Machine not only avoids a large number of the waste straw burning in the fields, protects the environment, but also develops the renewable energy. The molding fuel compares with the ordinary coal, the heating volume is nearly the same, and it is fast to light fire, big fire intensity, long burning time and burning completely, it is an ideal clean fuel. It has reliable performance, easy and convenient operation. This machine is adapted to a wide range of raw materials, such as corn, straw, peanut shell, bean straw, flower crops and other kinds of inflammable waste crop stalks.
Product characteristics, uses and application ranges:
Firstly, the design of the product is reasonable, manufacturing quality is reliable, it is figured with the simple structure, convenient operation, small size, and covers less place, saves electric and labor.
Secondly, the design of automatic controlling electric heating device can regulate material humidity randomly to ensure the stability of molding material, improve the work efficiency.
Thirdly, the main components of the machine adopt abrasion-resistance material which has been specially processed, so it can produce continuously, durable.
Fourthly, be especially adaptable for molding a variety of biomass raw materials (maize straw, wheat straw, cotton rod, straw, rice husk, peanut shell, corn cob, twigs, leaves, sawdust, etc).
Technical parameters
Technical parameters
Type
JGY-10
JGY-15
JGY-20
JGY-30
Motor power
(kw)
11-15
15-18.5
18.5-22
30-37
Output(kg/h)
500-900
900-1500
1500-2000
2500-3000
Size and Shape
32X32 Cubic
strip
32round
33 round
33 round
Solid forming
density (g/cm3)
0.8-1.4
0.8-1.4
0.8-1.4
0.8-1.4
Material
Moisture (%)
10-25
10-30
10-30
10-30
Materials
Length(mm)
3-50
3-60
3-60
3-60
Overall
dimension(mm)
1700x800x1400
1800x900x1660
1800x900x1680
2000x1000x1700
Total weight
(T / Units)
0.8
1.38
1.54
1.94
straw pellet machine(capacity: 800-1000kg/h)
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team to
Our advantages of straw pellet machine
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc. We have already got CE certificates for all of our equipments.
Our advantages of straw pellet machine
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc. We have already got CE certificates for all of our equipments.
straw pellet machine,waste pellet machine,fuel-making pellet machine
1.waste pellet machine.
2.fuel-making pellet machine.
3.quality pellet mill.
4.quantity pellet mill and pellet machine.
XKJ550 type pellet machine
Motor: Y280S-6 45 kw transfer speed 980
Flat die diameter: 500 mm
Ping-mode speed: 230r/min
Die Hole Size: Ø2 ---- Ø20 for different use
Grain moisture content: less than 10% of raw materials
Body size: length × width × height 220 × 90 × 160 (cm)
Body weight: about 500 kg
Main features:
1. the model with oblique roller wheel.
And ends with the mold plate, the outer wire-speed line, does not appear dislocation friction wheel and die, reducing drag, reducing the kinetic energy loss, to extend the life of the mold.
2.even roller set, smooth, flat molding to prevent the common phenomenon of the feed roll easily.
3.with center regulator structure, adapt to different materials to ensure the suppression effect.
Wood chips, corn stalks, etc. takes a lot of pressure compression molding, granulation in the same equipment, roller parts are the center of the device components, and the use of high-quality alloy steel, increased roller life.
4.the model with multiple aperture Ø2 ---- Ø20 mold, adapted to different materials, granulation, the best results.
Scope:
It is mainly suitable for crude fiber, such as: sawdust, rice husk, cotton stalks, cottonseed skins, weeds and other crop residues, waste, plant waste, low bonding difficult materials forming granulation, can be applied to
bio-fertilizer, organic fertilizers, compound fertilizers and other low-temperature granulation.
2.fuel-making pellet machine.
3.quality pellet mill.
4.quantity pellet mill and pellet machine.
XKJ550 type pellet machine
Motor: Y280S-6 45 kw transfer speed 980
Flat die diameter: 500 mm
Ping-mode speed: 230r/min
Die Hole Size: Ø2 ---- Ø20 for different use
Grain moisture content: less than 10% of raw materials
Body size: length × width × height 220 × 90 × 160 (cm)
Body weight: about 500 kg
Main features:
1. the model with oblique roller wheel.
And ends with the mold plate, the outer wire-speed line, does not appear dislocation friction wheel and die, reducing drag, reducing the kinetic energy loss, to extend the life of the mold.
2.even roller set, smooth, flat molding to prevent the common phenomenon of the feed roll easily.
3.with center regulator structure, adapt to different materials to ensure the suppression effect.
Wood chips, corn stalks, etc. takes a lot of pressure compression molding, granulation in the same equipment, roller parts are the center of the device components, and the use of high-quality alloy steel, increased roller life.
4.the model with multiple aperture Ø2 ---- Ø20 mold, adapted to different materials, granulation, the best results.
Scope:
It is mainly suitable for crude fiber, such as: sawdust, rice husk, cotton stalks, cottonseed skins, weeds and other crop residues, waste, plant waste, low bonding difficult materials forming granulation, can be applied to
bio-fertilizer, organic fertilizers, compound fertilizers and other low-temperature granulation.
straw pellet machine
straw pellet machine
(1)pellet machine with CE
(2) Automatic lubrcation system
(3) wood pellet Capacity: 1.2-1.8 T/H
straw pellet machine
XGJ series straw pellet machine is our main product which has adopted the essence of pellet machine in oversea market. The heart part-double layer die has unique structural assembly and “rollers” are made of high wearable alloy materials.
A. straw pellet machine' Seven characteristics
1. Vertical feeding, so that the materials are directly in place.
2. Die is static and roller is rotary; materials are evenly distributed around because of centrifugal force.
3. Double-layer die. Two layers both can be used independently so the machine reduces the cost; What’s more, two layers of the die also can be used at the same time, in this way, the efficiency has been improved greatly.
4. One die with two different apertures. The pellets may have different specifications.
5. Macroporous die; wire joining circular tube; increasing travel; improving density.
6. Ring die and vertical structure are good for cooling the pelletizing room.
7. Independent and frequency conversion discharge device can ensure the rate of pellet formation.
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
If you are interested in our straw pellet machine, please do not hesiate to contact me. I will reply you as soon as possible.
Best regards,
Wendy
Mobile: 00 86 18678866202
Fax: 00 86 531 8348 3997
(1)pellet machine with CE
(2) Automatic lubrcation system
(3) wood pellet Capacity: 1.2-1.8 T/H
straw pellet machine
XGJ series straw pellet machine is our main product which has adopted the essence of pellet machine in oversea market. The heart part-double layer die has unique structural assembly and “rollers” are made of high wearable alloy materials.
A. straw pellet machine' Seven characteristics
1. Vertical feeding, so that the materials are directly in place.
2. Die is static and roller is rotary; materials are evenly distributed around because of centrifugal force.
3. Double-layer die. Two layers both can be used independently so the machine reduces the cost; What’s more, two layers of the die also can be used at the same time, in this way, the efficiency has been improved greatly.
4. One die with two different apertures. The pellets may have different specifications.
5. Macroporous die; wire joining circular tube; increasing travel; improving density.
6. Ring die and vertical structure are good for cooling the pelletizing room.
7. Independent and frequency conversion discharge device can ensure the rate of pellet formation.
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
If you are interested in our straw pellet machine, please do not hesiate to contact me. I will reply you as soon as possible.
Best regards,
Wendy
Mobile: 00 86 18678866202
Fax: 00 86 531 8348 3997
straw pellet machine
straw pellet machine
1. Taper roller pellet machine
2. CE pellet machine
3. Automatic lubrication system
4.Patent product
starw pellet machine
1. Our straw pellet machine(Patent NO:200720157337.9 ) with CE certificate adopted the techonology from Germany( KAHL )13 years ago. And our patent--Taper Shape Rollers reduce the friction between flat die and rollers, so the lifetime of the die and rollers lengthened a lot. It is your best choice to press biomass pellet, such as wood pellet, straw pellet, rice husk pellet and so on.
2. For SKJ3- Series straw pellet machine, we have the oil pump matched with the machine, which can lubricate the rollers automatically when they are working.
3. Because of the high pressure and stable operation, our wood pellet machine (flat die pellet mill) can make good density pellets without bond. The materials that can be used for making pellets by wood pellet machine are as follows:
Coarse fiber: wood sawdust, corn stalk, rice husk, cotton stalk, weeds, crop straw, paper, plastic, cocopeat, bran, home wastage, factory reject and so on.
Our pellet machine can also make feed from corn, soybean, and so on. Also can be used for making biological fertilizer, organic fertilizer etc.
4. The following specifications about the capacity is for wood pellet, if the machines are used for making feed pellets or fertilizer pellets, the capacity will be doubled or three times.
Model
Output(kg/h)
Power (kw)
Diameter of pellet (mm)
Weight(t)
Size(mm)
Note
SKJ2-200
100-160
11
Φ4-6
0.28
1300×500×850
Diesel engine and motor dual-use
SKJ2-250
160-260
15
Φ4-6
0.5
1400×600×1000
SKJ2-300
300-500
30
Φ4-8
0.76
1860×670×1600
SKJ3-350A
400-600
37
Φ4.5-10
2.2
1900×850×1700
Gear rotation
Auto-Lubrication systerm
SKJ3-450A
500-800
55
Φ4.5-10
4.3
2300×1100×1900
SKJ3-550A
1000-1500
90
Φ4.5-12
5.5
2350×1000×2050
SKJ3-800
1500-2500
130-160
Φ4.5-12
6.8
3200×1235×2700
SKJ4-1200
3000-5000
280-320
Φ4.5-15
19
3800×1700×4200
SKJ300B
100-200
11
Briquette diamete: Φ6-25
Press size:
20×30
0.8
1170×420×850
SKJ3-350B
200-500
30
2
1500×1600×1750
Auto-Lubrication systerm
SKJ3-450B
400-700
45
3.5
1980×900×1700
SKJ3-550B
600-1000
75
2.8
1575×2300×1950
If you are interested in our pellet machines, please do not hesitate to contact us!
Best regards
Wendy wang
Tel: 0086-531-83483996
MP.: 0086-18678866202
Fax: 0086-531-83483378
1. Taper roller pellet machine
2. CE pellet machine
3. Automatic lubrication system
4.Patent product
starw pellet machine
1. Our straw pellet machine(Patent NO:200720157337.9 ) with CE certificate adopted the techonology from Germany( KAHL )13 years ago. And our patent--Taper Shape Rollers reduce the friction between flat die and rollers, so the lifetime of the die and rollers lengthened a lot. It is your best choice to press biomass pellet, such as wood pellet, straw pellet, rice husk pellet and so on.
2. For SKJ3- Series straw pellet machine, we have the oil pump matched with the machine, which can lubricate the rollers automatically when they are working.
3. Because of the high pressure and stable operation, our wood pellet machine (flat die pellet mill) can make good density pellets without bond. The materials that can be used for making pellets by wood pellet machine are as follows:
Coarse fiber: wood sawdust, corn stalk, rice husk, cotton stalk, weeds, crop straw, paper, plastic, cocopeat, bran, home wastage, factory reject and so on.
Our pellet machine can also make feed from corn, soybean, and so on. Also can be used for making biological fertilizer, organic fertilizer etc.
4. The following specifications about the capacity is for wood pellet, if the machines are used for making feed pellets or fertilizer pellets, the capacity will be doubled or three times.
Model
Output(kg/h)
Power (kw)
Diameter of pellet (mm)
Weight(t)
Size(mm)
Note
SKJ2-200
100-160
11
Φ4-6
0.28
1300×500×850
Diesel engine and motor dual-use
SKJ2-250
160-260
15
Φ4-6
0.5
1400×600×1000
SKJ2-300
300-500
30
Φ4-8
0.76
1860×670×1600
SKJ3-350A
400-600
37
Φ4.5-10
2.2
1900×850×1700
Gear rotation
Auto-Lubrication systerm
SKJ3-450A
500-800
55
Φ4.5-10
4.3
2300×1100×1900
SKJ3-550A
1000-1500
90
Φ4.5-12
5.5
2350×1000×2050
SKJ3-800
1500-2500
130-160
Φ4.5-12
6.8
3200×1235×2700
SKJ4-1200
3000-5000
280-320
Φ4.5-15
19
3800×1700×4200
SKJ300B
100-200
11
Briquette diamete: Φ6-25
Press size:
20×30
0.8
1170×420×850
SKJ3-350B
200-500
30
2
1500×1600×1750
Auto-Lubrication systerm
SKJ3-450B
400-700
45
3.5
1980×900×1700
SKJ3-550B
600-1000
75
2.8
1575×2300×1950
If you are interested in our pellet machines, please do not hesitate to contact us!
Best regards
Wendy wang
Tel: 0086-531-83483996
MP.: 0086-18678866202
Fax: 0086-531-83483378
straw stalk briquette machine for straw fuel +86 371 67195556
As a professional manufacturer in exporting straw stalk briquette machine for agro-forestry wastes, we are leading a team to
Our advantages of straw stalk briquette machine
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc. We have already got CE certificates for all of our equipments.
Our advantages of straw stalk briquette machine
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc. We have already got CE certificates for all of our equipments.
street lamp
street lamp
1,Timely Delivery
2,Energy Saving >80%
3,Life Span >50000 hours
4,CE,ISO9001,ROHS Approved
street lamp
Features:
1. Illumination time is dusk to dawn and is fully automated via a photocell (light sensor).
2. The innovative and latest technology is employed to ensure optimum reliability and performance.
3. The light head attaches to the support arm, which fixes to the pole. The pole has a integral base which
can be bolted directly to a level, solid surface. A battery box is supplied to facilitate the rechargeable batteries.
Configuration Options
LED lights
36W, 50W, 60W, 80W, 100W(options)
Solar panel
80W, 100W, 120W, 150W, 180W(options)
Storage battery
120AH, 160AH, 200AH, 240AH(options)
Controller
12V/5A, 24V/10A(options)
Pole
6m, 8m, 10m, 12m,14m,16m(options)
Daily running hours
80hrs, 10hrs, 12hrs(options)
Autonomy days
3days, 4days, 6days(options)
Battery location
top of pole, bottom of pole, underground(options
1,Timely Delivery
2,Energy Saving >80%
3,Life Span >50000 hours
4,CE,ISO9001,ROHS Approved
street lamp
Features:
1. Illumination time is dusk to dawn and is fully automated via a photocell (light sensor).
2. The innovative and latest technology is employed to ensure optimum reliability and performance.
3. The light head attaches to the support arm, which fixes to the pole. The pole has a integral base which
can be bolted directly to a level, solid surface. A battery box is supplied to facilitate the rechargeable batteries.
Configuration Options
LED lights
36W, 50W, 60W, 80W, 100W(options)
Solar panel
80W, 100W, 120W, 150W, 180W(options)
Storage battery
120AH, 160AH, 200AH, 240AH(options)
Controller
12V/5A, 24V/10A(options)
Pole
6m, 8m, 10m, 12m,14m,16m(options)
Daily running hours
80hrs, 10hrs, 12hrs(options)
Autonomy days
3days, 4days, 6days(options)
Battery location
top of pole, bottom of pole, underground(options
street light
street light
1,Timely Delivery
2,Energy Saving >80%
3,Life Span >50000 hours
4,CE,ISO9001,ROHS Approved
street light
Features:
1. Illumination time is dusk to dawn and is fully automated via a photocell (light sensor).
2. The innovative and latest technology is employed to ensure optimum reliability and performance.
3. The light head attaches to the support arm, which fixes to the pole. The pole has a integral base which
can be bolted directly to a level, solid surface. A battery box is supplied to facilitate the rechargeable batteries.
Configuration Options
LED lights
36W, 50W, 60W, 80W, 100W(options)
Solar panel
80W, 100W, 120W, 150W, 180W(options)
Storage battery
120AH, 160AH, 200AH, 240AH(options)
Controller
12V/5A, 24V/10A(options)
Pole
6m, 8m, 10m, 12m,14m,16m(options)
Daily running hours
80hrs, 10hrs, 12hrs(options)
Autonomy days
3days, 4days, 6days(options)
Battery location
top of pole, bottom of pole, underground(options
1,Timely Delivery
2,Energy Saving >80%
3,Life Span >50000 hours
4,CE,ISO9001,ROHS Approved
street light
Features:
1. Illumination time is dusk to dawn and is fully automated via a photocell (light sensor).
2. The innovative and latest technology is employed to ensure optimum reliability and performance.
3. The light head attaches to the support arm, which fixes to the pole. The pole has a integral base which
can be bolted directly to a level, solid surface. A battery box is supplied to facilitate the rechargeable batteries.
Configuration Options
LED lights
36W, 50W, 60W, 80W, 100W(options)
Solar panel
80W, 100W, 120W, 150W, 180W(options)
Storage battery
120AH, 160AH, 200AH, 240AH(options)
Controller
12V/5A, 24V/10A(options)
Pole
6m, 8m, 10m, 12m,14m,16m(options)
Daily running hours
80hrs, 10hrs, 12hrs(options)
Autonomy days
3days, 4days, 6days(options)
Battery location
top of pole, bottom of pole, underground(options
48v 40ah lifepo4 electric golf car battery packs
1.high quality, fast charging
2.battery got CE certification
3.without memory effects over 2000cycles
4.environment friendly
Battery model
48V40AH
Nominal voltage
48V
Battery capacity
40AH
Operating current
40A
Charge voltage
57V
Size
L385*w205*H165mm
Weight
About 25kg
Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers’requirement, for further information please feel free to contact us.
2.battery got CE certification
3.without memory effects over 2000cycles
4.environment friendly
Battery model
48V40AH
Nominal voltage
48V
Battery capacity
40AH
Operating current
40A
Charge voltage
57V
Size
L385*w205*H165mm
Weight
About 25kg
Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers’requirement, for further information please feel free to contact us.
street lighting
street lighting
1,Timely Delivery
2,Energy Saving >80%
3,Life Span >50000 hours
4,CE,ISO9001,ROHS Approved
street lighting
Features:
1. Illumination time is dusk to dawn and is fully automated via a photocell (light sensor).
2. The innovative and latest technology is employed to ensure optimum reliability and performance.
3. The light head attaches to the support arm, which fixes to the pole. The pole has a integral base which
can be bolted directly to a level, solid surface. A battery box is supplied to facilitate the rechargeable batteries.
Configuration Options
LED lights
36W, 50W, 60W, 80W, 100W(options)
Solar panel
80W, 100W, 120W, 150W, 180W(options)
Storage battery
120AH, 160AH, 200AH, 240AH(options)
Controller
12V/5A, 24V/10A(options)
Pole
6m, 8m, 10m, 12m,14m,16m(options)
Daily running hours
80hrs, 10hrs, 12hrs(options)
Autonomy days
3days, 4days, 6days(options)
Battery location
top of pole, bottom of pole, underground(options
1,Timely Delivery
2,Energy Saving >80%
3,Life Span >50000 hours
4,CE,ISO9001,ROHS Approved
street lighting
Features:
1. Illumination time is dusk to dawn and is fully automated via a photocell (light sensor).
2. The innovative and latest technology is employed to ensure optimum reliability and performance.
3. The light head attaches to the support arm, which fixes to the pole. The pole has a integral base which
can be bolted directly to a level, solid surface. A battery box is supplied to facilitate the rechargeable batteries.
Configuration Options
LED lights
36W, 50W, 60W, 80W, 100W(options)
Solar panel
80W, 100W, 120W, 150W, 180W(options)
Storage battery
120AH, 160AH, 200AH, 240AH(options)
Controller
12V/5A, 24V/10A(options)
Pole
6m, 8m, 10m, 12m,14m,16m(options)
Daily running hours
80hrs, 10hrs, 12hrs(options)
Autonomy days
3days, 4days, 6days(options)
Battery location
top of pole, bottom of pole, underground(options
strong resistance wind generator
1. 400w output
2. CFRP blades
3. low noise
4. easy to install
5. beautiful appearance
2. CFRP blades
3. low noise
4. easy to install
5. beautiful appearance
student bottle
student bottle
It is made of import meterial PC,look fashion generous,green product,against blow-out,good quality,easy-taken.
student bottle
Kettle, cups, plastic specialized manufacturers
supply products as follows:
(according to use classification) sports bottle, space cup, hiking water bottle, outdoor water bottle,
travel kettle, gift cup, advertisement cup, plastic cup, cup, plastic water bottle, bicycle water bottle,
children bottle, students water bottles, advertising water bottle, water bottle
(according to the material classification) PE sports water bottle, PP sports bottle, PVC sports
bottle, PC bottle, TRITAN kettles, PET bottle, BPA FREE water bottle, BPA FREE Water Bottle
Model
Space Cup health characteristics:
strong explosion-proof, impact resistance, high temperature, leak-proof design to ensure leak-free!
look beautiful, generous, fashion, environmental protection, the water pot by SGS testing, in line
with national.
Instructions:
1. This product material has met the U.S. Food and Drug Administration (FDA) standards for testing; 2. Within the annex may remove the plastic grid can control the amount of drinking water;
3. To use before you are washing with a mild soapy water;
4 . for dishwasher cleaning;
5. removed the plastic ring and cap immediately after microwave
6. water bottles filled with carbohydrate-containing beverages, please carefully open the cap;
Warning: ere are small parts, please under the guidance of adult use. For the object:
for outdoor sports, recreation, mountain climbing, travel, business office, corporate promotional activities.
New marketing programs: I have plants to meet the different levels of customer demand, order quantity conditions are some of the products has been reduced to 1000 can be ordered, color, uniform standards by the Division I colors, welcome to my friends advice, to discuss cooperation matters
It is made of import meterial PC,look fashion generous,green product,against blow-out,good quality,easy-taken.
student bottle
Kettle, cups, plastic specialized manufacturers
supply products as follows:
(according to use classification) sports bottle, space cup, hiking water bottle, outdoor water bottle,
travel kettle, gift cup, advertisement cup, plastic cup, cup, plastic water bottle, bicycle water bottle,
children bottle, students water bottles, advertising water bottle, water bottle
(according to the material classification) PE sports water bottle, PP sports bottle, PVC sports
bottle, PC bottle, TRITAN kettles, PET bottle, BPA FREE water bottle, BPA FREE Water Bottle
Model
Space Cup health characteristics:
strong explosion-proof, impact resistance, high temperature, leak-proof design to ensure leak-free!
look beautiful, generous, fashion, environmental protection, the water pot by SGS testing, in line
with national.
Instructions:
1. This product material has met the U.S. Food and Drug Administration (FDA) standards for testing; 2. Within the annex may remove the plastic grid can control the amount of drinking water;
3. To use before you are washing with a mild soapy water;
4 . for dishwasher cleaning;
5. removed the plastic ring and cap immediately after microwave
6. water bottles filled with carbohydrate-containing beverages, please carefully open the cap;
Warning: ere are small parts, please under the guidance of adult use. For the object:
for outdoor sports, recreation, mountain climbing, travel, business office, corporate promotional activities.
New marketing programs: I have plants to meet the different levels of customer demand, order quantity conditions are some of the products has been reduced to 1000 can be ordered, color, uniform standards by the Division I colors, welcome to my friends advice, to discuss cooperation matters
sugar cane bagasse Briquette Machine
sugar cane bagasse Briquette Machine
1.CE Certification
2.Hot sale in Europe
3.High quality
4.Easy operation
sugar cane bagasse Briquette Machine
Briquette press Summary
Hongji charcoal/biomass briquette press can process any kinds of agro-forestry wastes into renewable bio-fuel. Biomass briquette press can make 30-80 mm solid, hexagonal or square or round cyclinder solid fuel briquettes.
The briquette materials can be wood chips, sawdust, sugar cane bagasse, branches, rice
husk, rice straw, cotton stalk, cottonseed skins, wood, wood shavings, wood chips, mustard stalk, wheat straw, soybeans husk, coffee husk, sunflower husk, peanut-shell, sugar cane bagasse, maize stalk, palm fruit bunch , paddy straw , tobacco waste, bamboo dust and any other crop wastes.
Biomass briquetting is the process of converting substantial biomass wastes into high density and energy concentrated bio fuel briquettes. Biomass briquettes are one kind of ultimate green energy source of renewable energy. And the biomass briquettes are non-conventional source of energy, renewable in nature, eco-friendly, non-polluting and economical. In the whole process no binders and chemicals are needed, 100% natural ensured. The higher density, the higher heating value, the biomass briquettes calorific value is up to 3000-4000 Cal/kg. Compared with fire wood and loose biomass, the briquettes show much higher heat because of lower moisture and higher density.
Biomass briquettes are widely used in boilers, refractory, chemicals, home heating, etc. They become more and more popular as fuel all over the world.
1.CE Certification
2.Hot sale in Europe
3.High quality
4.Easy operation
sugar cane bagasse Briquette Machine
Briquette press Summary
Hongji charcoal/biomass briquette press can process any kinds of agro-forestry wastes into renewable bio-fuel. Biomass briquette press can make 30-80 mm solid, hexagonal or square or round cyclinder solid fuel briquettes.
The briquette materials can be wood chips, sawdust, sugar cane bagasse, branches, rice
husk, rice straw, cotton stalk, cottonseed skins, wood, wood shavings, wood chips, mustard stalk, wheat straw, soybeans husk, coffee husk, sunflower husk, peanut-shell, sugar cane bagasse, maize stalk, palm fruit bunch , paddy straw , tobacco waste, bamboo dust and any other crop wastes.
Biomass briquetting is the process of converting substantial biomass wastes into high density and energy concentrated bio fuel briquettes. Biomass briquettes are one kind of ultimate green energy source of renewable energy. And the biomass briquettes are non-conventional source of energy, renewable in nature, eco-friendly, non-polluting and economical. In the whole process no binders and chemicals are needed, 100% natural ensured. The higher density, the higher heating value, the biomass briquettes calorific value is up to 3000-4000 Cal/kg. Compared with fire wood and loose biomass, the briquettes show much higher heat because of lower moisture and higher density.
Biomass briquettes are widely used in boilers, refractory, chemicals, home heating, etc. They become more and more popular as fuel all over the world.
sun courtyard lamp
One of the major sources of energy of this century of solar energy mankind. To 2050,30% power in the world was produced and will
The design is made the sun courtyard lamp from thinking over the environmental protection and save energy etc. This lamp especially is suitable in life small area, golf court, island, high mountain and square etc. This product adopting import monocrystalline silicon solar energy package or and seals up exempting the maintenance lead-acid battery entirely. The entirely automatic electronic switch of light accuse, every late illumination 5-6, and can keep 3-5's day overcast and rainy day normal operations, need not the line installation, need not appointed man control and manage, the illumination lamps and lanterns of outdoor that are ideal.
The technology parameter:
1. Solar energy cells: monocrystalline silicon or polycrystalline silicon solar energy cell, power are entered port: 12-50W
2. Storage battery: high reliably maintenance lead - sour storage battery, capacity 12-65AH are exempted
3. The light source: 12V / 5 - 18W,'s save energy lamp.
4. The brain: is bare the accuse + time switch, and crosses filling, puts excessively and the short circuit and waterproof protection, the high reliability is designed.
5. The use temperature: 20 degrees to 70 degrees.
6. Burning time: every day 5-6 hour, the guaranty continuous wet weather sky 3-5 sky can be worked.
7. Service life: the solar energy cell board is 20 years, storage battery 3-5 year.
8. The lamp pole material: iron casting / stainless steel / steels
9. The lamp is high: 2.8m - 4.5m
10. Weight: 15Kg
11. The resisted wind grade: 33 meters / second ( 12 level )
12. The packing: 1 / chest
13. The use scope: small area and park mountain-climbing of city road and discusss and tour scenic spot and square etc the illumination the decoration. Also can according to the user need with the mentioned above place the local junction circuit illumination system transforms into the solar energy illumination
The design is made the sun courtyard lamp from thinking over the environmental protection and save energy etc. This lamp especially is suitable in life small area, golf court, island, high mountain and square etc. This product adopting import monocrystalline silicon solar energy package or and seals up exempting the maintenance lead-acid battery entirely. The entirely automatic electronic switch of light accuse, every late illumination 5-6, and can keep 3-5's day overcast and rainy day normal operations, need not the line installation, need not appointed man control and manage, the illumination lamps and lanterns of outdoor that are ideal.
The technology parameter:
1. Solar energy cells: monocrystalline silicon or polycrystalline silicon solar energy cell, power are entered port: 12-50W
2. Storage battery: high reliably maintenance lead - sour storage battery, capacity 12-65AH are exempted
3. The light source: 12V / 5 - 18W,'s save energy lamp.
4. The brain: is bare the accuse + time switch, and crosses filling, puts excessively and the short circuit and waterproof protection, the high reliability is designed.
5. The use temperature: 20 degrees to 70 degrees.
6. Burning time: every day 5-6 hour, the guaranty continuous wet weather sky 3-5 sky can be worked.
7. Service life: the solar energy cell board is 20 years, storage battery 3-5 year.
8. The lamp pole material: iron casting / stainless steel / steels
9. The lamp is high: 2.8m - 4.5m
10. Weight: 15Kg
11. The resisted wind grade: 33 meters / second ( 12 level )
12. The packing: 1 / chest
13. The use scope: small area and park mountain-climbing of city road and discusss and tour scenic spot and square etc the illumination the decoration. Also can according to the user need with the mentioned above place the local junction circuit illumination system transforms into the solar energy illumination
super 48V rechargeable lithium battery
1.high quality, fast charging
2.high durability with extra power
3.battery manufacturer
4.pollution-free
5.long cycle life
Battery model
48V10AH
Nominal voltage
48V
Battery capacity
10AH
Operating current
10A
Charge voltage
58.4V
Size
L132*w86*H265mm
Weight
About 5.0kg
Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers’requirement, for further information please feel free to contact us.
2.high durability with extra power
3.battery manufacturer
4.pollution-free
5.long cycle life
Battery model
48V10AH
Nominal voltage
48V
Battery capacity
10AH
Operating current
10A
Charge voltage
58.4V
Size
L132*w86*H265mm
Weight
About 5.0kg
Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers’requirement, for further information please feel free to contact us.
super 24V rechargeable lithium battery
1.high quality,fast charging
2.high durability with extra power
3.environment friendly
4.very competitive price
Battery model
24V30AH
Nominal voltage
24V
Battery capacity
30AH
Size
150*165*220m
Weight
about 7480g
Max charge current
≤0.5CA
Max discharge current
Constant current ≤15A
Impulse current ≤30A
Cycle life
≥2000 Times
Operating temperature
Charge 0°C-60°C
Discharge -25°C-60°C
Warrenty
1 year
2.high durability with extra power
3.environment friendly
4.very competitive price
Battery model
24V30AH
Nominal voltage
24V
Battery capacity
30AH
Size
150*165*220m
Weight
about 7480g
Max charge current
≤0.5CA
Max discharge current
Constant current ≤15A
Impulse current ≤30A
Cycle life
≥2000 Times
Operating temperature
Charge 0°C-60°C
Discharge -25°C-60°C
Warrenty
1 year
super bright led street light manufacture directly
super bright led street light manufacture directly
1> aluminum reflector
2> toughened glass shade
super bright led street light manufacture directly
Input Voltage
85-285VAC; 12 or 24VAC/DC
Frequency Range
47 ~ 63 Hz
Power Factor(PF)
>0.92
Total Harmonic Distortion(THD)
>20%
Power Efficiency
85%
Working Voltage
85-264VAC, 12 or 24VAC/DC
LED Luminous Efficiency
≥95 lm/w
LED Initial Flux?
2,750 lm ( Tj=25°C )
LED Maintain Flux
2,500 lm ( Tj=70°C,Ta=25°C)
Lamp Output Flux
2,350 lm ( Tj=70°C,Ta=25°C)
Lamp's Efficiency ( %)
>90 %
Illumination ( E )
(Height=6 m )≥20.5 lux(Equal to HPS 40 lux)
(Height=8 m ) ≥11.5 lux(Equal to HPS 25 lux)
(Height=10 m )≥8 lux(Equal to HPS 18 lux)
(Height=12 m )≥6.5 lux(Equal to HPS 12 lux)
Effective Illuminated Area
20×8 m (Height=6 m )
26×10 m (Height=8 m )
Color Temperature
Pure White, White White, Cool White
Color Index(CRI)
Ra>85
Light Source
High Power 1 Watt LED, CREE, OSRAM, SEMILED,EDISON
Light Distribution Curve / Beam Pattern
Asymmetric (Bat Wing) / Rectangular Beam
The Highest Light Intensity Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Beam Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Junction Temperature ( Tj )
70 ° C ± 1 0% ( Ta= 25 ° C )
System Resistance ( Rja )
1.4 ° C / W
Working Temperature
- 30 ° C ~ 40 ° C
Working Humidity
10 % ~ 90 % RH
Storage Temperature
10 ° C ~ 85 ° C
Working Life
> 50,000 Hrs
1 Integrated single unit high power LED light source
2 Imported high brightness semiconductor chips
3 Aluminum Die-casting forming frame
4 Protection class IP65
5 Double light increase lamps and lanterns effective out light Angle
6 High illumination, bright color, free-glare and strobe
7 Able to work under low voltage conditions, safe and reliable
8 Environment-friendly ,excluding the ultraviolet ray and other harmful rays
9 Quit startup
10 With 50000 hrs life time
11 Able to be connected with solar energy system, high controllability
12 Flexible installation
1> aluminum reflector
2> toughened glass shade
super bright led street light manufacture directly
Input Voltage
85-285VAC; 12 or 24VAC/DC
Frequency Range
47 ~ 63 Hz
Power Factor(PF)
>0.92
Total Harmonic Distortion(THD)
>20%
Power Efficiency
85%
Working Voltage
85-264VAC, 12 or 24VAC/DC
LED Luminous Efficiency
≥95 lm/w
LED Initial Flux?
2,750 lm ( Tj=25°C )
LED Maintain Flux
2,500 lm ( Tj=70°C,Ta=25°C)
Lamp Output Flux
2,350 lm ( Tj=70°C,Ta=25°C)
Lamp's Efficiency ( %)
>90 %
Illumination ( E )
(Height=6 m )≥20.5 lux(Equal to HPS 40 lux)
(Height=8 m ) ≥11.5 lux(Equal to HPS 25 lux)
(Height=10 m )≥8 lux(Equal to HPS 18 lux)
(Height=12 m )≥6.5 lux(Equal to HPS 12 lux)
Effective Illuminated Area
20×8 m (Height=6 m )
26×10 m (Height=8 m )
Color Temperature
Pure White, White White, Cool White
Color Index(CRI)
Ra>85
Light Source
High Power 1 Watt LED, CREE, OSRAM, SEMILED,EDISON
Light Distribution Curve / Beam Pattern
Asymmetric (Bat Wing) / Rectangular Beam
The Highest Light Intensity Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Beam Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Junction Temperature ( Tj )
70 ° C ± 1 0% ( Ta= 25 ° C )
System Resistance ( Rja )
1.4 ° C / W
Working Temperature
- 30 ° C ~ 40 ° C
Working Humidity
10 % ~ 90 % RH
Storage Temperature
10 ° C ~ 85 ° C
Working Life
> 50,000 Hrs
1 Integrated single unit high power LED light source
2 Imported high brightness semiconductor chips
3 Aluminum Die-casting forming frame
4 Protection class IP65
5 Double light increase lamps and lanterns effective out light Angle
6 High illumination, bright color, free-glare and strobe
7 Able to work under low voltage conditions, safe and reliable
8 Environment-friendly ,excluding the ultraviolet ray and other harmful rays
9 Quit startup
10 With 50000 hrs life time
11 Able to be connected with solar energy system, high controllability
12 Flexible installation
supermarket workshop gymnasium warehouse light 150w
1. High purity Aluminium
2. Original American Cree LED
3. UL proved power driver
4. IP55/65 waterproof
5. 3 years' warranty
supermarket workshop gymnasium warehouse light 150w
Critical Parameter:
Model Number
AEM-G01-150W-68
Water Proof: IP 55/IP 65
Beam Angle: 60,90,120 degree
LED Type:
Cree
(made in America)
Luminous:7,000~8,000lm
Warranty:
three years
Heat-sink: Dia 160mm,Length 180mm
Certifications: UL proved power driver
Voltage:AC 85v-265v
Color: Commercial white, Cool white
Materails:
Purity Aluminum
Installation Distance: 15~20m
Installation Height: 5~10m
Features:
*High purity Aluminium reflector, heat sink and hanging hook.
*High luminous flux, 60% Encergy saving than sodium light.
*Colors: Commercial white, Cold white alternative.
*The physical color presentation is more vivid.
*Wide voltage and constant current design.
*High efficiency stable UL power driver.
*Simple installation & casy to remove.
*High shock and vibration resistant.
*Low heat emission.
*3 years' warranty.
*No UV or IR radiation.
*No noise, no flickering.
*
IP55 or IP65 waterproof for outdoor use.
*Green,non-polluting,no lead,no mercury and other pollution elements.
*Life span:50,000- 100,000hrs,or more than 11 years if it is used 12 hours per day.
Our services:
1. Your inquiry related to our products or prices will be replied in 24hours.
2. OEM&ODM, any your customized lightings we can help you to design.
Application:
It is widely used in both indoor and outdoor applications, such as
Industrial building,supermarket,gymnasium,subway platform,gas station,
large retail stores,
production lines, exhibition halls, warehouses, factories, etc.
2. Original American Cree LED
3. UL proved power driver
4. IP55/65 waterproof
5. 3 years' warranty
supermarket workshop gymnasium warehouse light 150w
Critical Parameter:
Model Number
AEM-G01-150W-68
Water Proof: IP 55/IP 65
Beam Angle: 60,90,120 degree
LED Type:
Cree
(made in America)
Luminous:7,000~8,000lm
Warranty:
three years
Heat-sink: Dia 160mm,Length 180mm
Certifications: UL proved power driver
Voltage:AC 85v-265v
Color: Commercial white, Cool white
Materails:
Purity Aluminum
Installation Distance: 15~20m
Installation Height: 5~10m
Features:
*High purity Aluminium reflector, heat sink and hanging hook.
*High luminous flux, 60% Encergy saving than sodium light.
*Colors: Commercial white, Cold white alternative.
*The physical color presentation is more vivid.
*Wide voltage and constant current design.
*High efficiency stable UL power driver.
*Simple installation & casy to remove.
*High shock and vibration resistant.
*Low heat emission.
*3 years' warranty.
*No UV or IR radiation.
*No noise, no flickering.
*
IP55 or IP65 waterproof for outdoor use.
*Green,non-polluting,no lead,no mercury and other pollution elements.
*Life span:50,000- 100,000hrs,or more than 11 years if it is used 12 hours per day.
Our services:
1. Your inquiry related to our products or prices will be replied in 24hours.
2. OEM&ODM, any your customized lightings we can help you to design.
Application:
It is widely used in both indoor and outdoor applications, such as
Industrial building,supermarket,gymnasium,subway platform,gas station,
large retail stores,
production lines, exhibition halls, warehouses, factories, etc.
supply FZY2K 2kw wind generator
wind generator
1. supply small wind generator
2. MOQ: one set
3. CE and ISO certificates
4. Delivery time: 3 working days
wind generator
Rated Power (W)
2000
Rotor diameter (m)
3.2
Blade material and quantity
Fiber Reinforce Plastic*3
Maximum power(W)
3000
Rated wind speed (m/s)
9
Rated rotating speed (r/min)
320
Start wind speed (m/s)
3
Working wind speed (m/s)
3-25
Security wind speed (m/s)
40
Output voltage DC/AC (V)
72/220
Speed regulation methord
yaw& magnetic resistance
Recommended accumulators(Ah)
1200
Wind turbine type
permanent magnet
Working temperature(°C)
-40-60
Weight (excluding tower)(kg)
80
Pulling tower /height (m)
89*4/6
CAN SUPPLY POWER FOR
Refrigerator, Water pump, Television, Washer
"Windwings--the perpetual motion machine in the wind"is your relieved choice !
1. supply small wind generator
2. MOQ: one set
3. CE and ISO certificates
4. Delivery time: 3 working days
wind generator
Rated Power (W)
2000
Rotor diameter (m)
3.2
Blade material and quantity
Fiber Reinforce Plastic*3
Maximum power(W)
3000
Rated wind speed (m/s)
9
Rated rotating speed (r/min)
320
Start wind speed (m/s)
3
Working wind speed (m/s)
3-25
Security wind speed (m/s)
40
Output voltage DC/AC (V)
72/220
Speed regulation methord
yaw& magnetic resistance
Recommended accumulators(Ah)
1200
Wind turbine type
permanent magnet
Working temperature(°C)
-40-60
Weight (excluding tower)(kg)
80
Pulling tower /height (m)
89*4/6
CAN SUPPLY POWER FOR
Refrigerator, Water pump, Television, Washer
"Windwings--the perpetual motion machine in the wind"is your relieved choice !
48v 40ah lifepo4 electric golf car battery packs
1.high quality, fast charging
2.battery got CE certification
3.without memory effects over 2000cycles
4.environment friendly
Battery model
48V40AH
Nominal voltage
48V
Battery capacity
40AH
Operating current
40A
Charge voltage
57V
Size
L385*w205*H165mm
Weight
About 25kg
Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers’requirement, for further information please feel free to contact us.
2.battery got CE certification
3.without memory effects over 2000cycles
4.environment friendly
Battery model
48V40AH
Nominal voltage
48V
Battery capacity
40AH
Operating current
40A
Charge voltage
57V
Size
L385*w205*H165mm
Weight
About 25kg
Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers’requirement, for further information please feel free to contact us.
Friday, February 11, 2011
suspension clamp
suspension clamp,clamp,electric power fitting
aluminum alloy
grip strength (10%RTS)
Clamp strength: 30kN
ISO 9001:2000
suspension clamp,clamp,electric power fitting
Composition:
pre-twisted wire, rubber clip block, cast aluminum sets of shells, rectangular hanging ring, U Type hanging ring.
Purposes:
to play a supportive role will be all-dielectric self-supporting cables (ADSS) are hung on a straight line on the tower.
Features:
a. Suspension ADSS fiber optic cable with a larger contact area, stress distribution uniform, no stress concentration points, play better on cable protection, while enhancing the position of the point set of the hanging cable stiffness.
b. there is a better dynamic stress capacity, can provide sufficient grip strength (10% RTS) to keep the ADSS fiber optic cable in the long run under the conditions of unbalanced load for safe operation.
c. The structure coupled with flexible rubber clip block, enhanced self-damping to reduce wear and tear.
d. rounded handle end to avoid scratching cable sheath, while increasing the corona voltage halo effect.
d. use of high-quality aluminum alloy material to enhance the mechanical properties of the clamp, significantly extended service life.
Technical requirements:
meet the DL / T 767-2003 All Dielectric Self-Supporting Optical Cable (ADSS) with the pre-cutter-style fittings technical requirements and test methods.
Ordering Information:
a. To meet the urban network 10kV distribution lines on the erection of ADSS fiber optic cable needs, I developed and produced for 150 meters span the tangent clamp, it is simple structure, easy installation, can also reduce the project cost.
b. According to the operation of ADSS fiber optic cable span, diameter, nominal tensile strength parameters such as selection of suitable QX-type pre-twist-type tangent clamp.
c. the number of configurations as follows: 1 set / line tower.
d. Clamp strength: 30kN.
ADSS with QX preformed suspension clamp Specifications Model Parameter table:
Model
For span(m)
Pre-twisted wire length of the clip(mm)
Clamp quality(kg)
AQX-150-**
150
800
1.7
Note: **-- on behalf of Cable diameter (mm)
aluminum alloy
grip strength (10%RTS)
Clamp strength: 30kN
ISO 9001:2000
suspension clamp,clamp,electric power fitting
Composition:
pre-twisted wire, rubber clip block, cast aluminum sets of shells, rectangular hanging ring, U Type hanging ring.
Purposes:
to play a supportive role will be all-dielectric self-supporting cables (ADSS) are hung on a straight line on the tower.
Features:
a. Suspension ADSS fiber optic cable with a larger contact area, stress distribution uniform, no stress concentration points, play better on cable protection, while enhancing the position of the point set of the hanging cable stiffness.
b. there is a better dynamic stress capacity, can provide sufficient grip strength (10% RTS) to keep the ADSS fiber optic cable in the long run under the conditions of unbalanced load for safe operation.
c. The structure coupled with flexible rubber clip block, enhanced self-damping to reduce wear and tear.
d. rounded handle end to avoid scratching cable sheath, while increasing the corona voltage halo effect.
d. use of high-quality aluminum alloy material to enhance the mechanical properties of the clamp, significantly extended service life.
Technical requirements:
meet the DL / T 767-2003 All Dielectric Self-Supporting Optical Cable (ADSS) with the pre-cutter-style fittings technical requirements and test methods.
Ordering Information:
a. To meet the urban network 10kV distribution lines on the erection of ADSS fiber optic cable needs, I developed and produced for 150 meters span the tangent clamp, it is simple structure, easy installation, can also reduce the project cost.
b. According to the operation of ADSS fiber optic cable span, diameter, nominal tensile strength parameters such as selection of suitable QX-type pre-twist-type tangent clamp.
c. the number of configurations as follows: 1 set / line tower.
d. Clamp strength: 30kN.
ADSS with QX preformed suspension clamp Specifications Model Parameter table:
Model
For span(m)
Pre-twisted wire length of the clip(mm)
Clamp quality(kg)
AQX-150-**
150
800
1.7
Note: **-- on behalf of Cable diameter (mm)
taper roller flat die pellet mill
flat die pellet mill
1 good quality pellets with high density
2Taper roller flat die pellet mill
3 pellet Capacity:1-1.5 T/H
flat die pellet mill
Advantage of the flat die pellet mill:
1. Adopts “taper-shape” roller (our patent) to make its wire speed consistent to inner and outer die(avoids dislocation friction, save costs, extends lifttime of roller and die), which is the biggest different compared with competitive press machine.
2.Adopts screw-center pressure adjusting structure to adjust pressure to meet different material demand.
3. Big body and board groove. Incomparable advantages of enlarging the pressed rollers at will.
4. Advanced heat treatment, sophisticated production process, fine material we use. Advanced CNC, and famous Huali Brand electric motor in China make our machine stand high among similar machine
Technical parameter:
Model: SKJ3-550
Power: 90 KW
Capacity: 1.2-1.5 T/H
Size: 2600*1100*2500
Automatic lubracation system
Hydraulic pressure
If you have any other questions about our flat die pellet mill, please do not hesitate to contact me.
Best regards
Wendy(Miss Wang)
Zhangqiu Yulong Machine Co., Ltd
Telephone: 00 86 531 83483996
Mobile: 00 86 18678866202
Fax: 00 86 531 8348 3378
www.woodpelletmill.net
1 good quality pellets with high density
2Taper roller flat die pellet mill
3 pellet Capacity:1-1.5 T/H
flat die pellet mill
Advantage of the flat die pellet mill:
1. Adopts “taper-shape” roller (our patent) to make its wire speed consistent to inner and outer die(avoids dislocation friction, save costs, extends lifttime of roller and die), which is the biggest different compared with competitive press machine.
2.Adopts screw-center pressure adjusting structure to adjust pressure to meet different material demand.
3. Big body and board groove. Incomparable advantages of enlarging the pressed rollers at will.
4. Advanced heat treatment, sophisticated production process, fine material we use. Advanced CNC, and famous Huali Brand electric motor in China make our machine stand high among similar machine
Technical parameter:
Model: SKJ3-550
Power: 90 KW
Capacity: 1.2-1.5 T/H
Size: 2600*1100*2500
Automatic lubracation system
Hydraulic pressure
If you have any other questions about our flat die pellet mill, please do not hesitate to contact me.
Best regards
Wendy(Miss Wang)
Zhangqiu Yulong Machine Co., Ltd
Telephone: 00 86 531 83483996
Mobile: 00 86 18678866202
Fax: 00 86 531 8348 3378
www.woodpelletmill.net
tension winding finned tube
tension winding finned tube
1,Production lines, quality is reliable
2,Low cost and stable performance
tension winding finned tube
Single metal finned tube type, specification
Specifications
Fin outside diameter
D(mm)
Fin the roots
d(mm)
Finned tube diameter
di(mm)
Fin pitch
t(mm)
The fin thickness
s(mm)
The highest working temperature
(°C)
The highest working pressure
(MPa)
SGL-26×2.3
26
15
12
2.3
0.3
200
1.5
-30×2.3
30
16
12
2.3
0.3
-36×2.5
36
20
16
2.5
0.3
-38×2.5
38
20
16
2.5
0.3
-42×2.5
42
22
18
2.5
0.35
-44×2.5
44
24
20
2.5
0.35
-44×3.2
44
25
20
3.2
0.35
-48×3.2
48
25
20
3.2
0.35
-50×2.5
50
25
20
2.5
0.35
-55×2.5
55
26
20
2.5
0.35
-57×3.2
57
27
20
3.2
0.4
-60×2.5
60
30
23
2.5
0.4
Heat exchanger, is part of the thermal fluid flow of heat transfer fluid equipment to cold, say again heat exchanger. Heat exchanger is chemical, oil, power, food and other many departments of industry in general equipment, production occupies an important position. The heat exchanger in chemical industry production can be as heater, cooler, condenser, evaporator and the boiling again, more widely.
1,Production lines, quality is reliable
2,Low cost and stable performance
tension winding finned tube
Single metal finned tube type, specification
Specifications
Fin outside diameter
D(mm)
Fin the roots
d(mm)
Finned tube diameter
di(mm)
Fin pitch
t(mm)
The fin thickness
s(mm)
The highest working temperature
(°C)
The highest working pressure
(MPa)
SGL-26×2.3
26
15
12
2.3
0.3
200
1.5
-30×2.3
30
16
12
2.3
0.3
-36×2.5
36
20
16
2.5
0.3
-38×2.5
38
20
16
2.5
0.3
-42×2.5
42
22
18
2.5
0.35
-44×2.5
44
24
20
2.5
0.35
-44×3.2
44
25
20
3.2
0.35
-48×3.2
48
25
20
3.2
0.35
-50×2.5
50
25
20
2.5
0.35
-55×2.5
55
26
20
2.5
0.35
-57×3.2
57
27
20
3.2
0.4
-60×2.5
60
30
23
2.5
0.4
Heat exchanger, is part of the thermal fluid flow of heat transfer fluid equipment to cold, say again heat exchanger. Heat exchanger is chemical, oil, power, food and other many departments of industry in general equipment, production occupies an important position. The heat exchanger in chemical industry production can be as heater, cooler, condenser, evaporator and the boiling again, more widely.
tension winding finned tube
tension winding finned tube
1,Complete kinds, the scale of production
2,Automatic production mode, the cost is low
tension winding finned tube
High frequency welding spiral finned tube
Name
symbols
Unit
Value
Steel pipe diameter
d
mm
16~140
Steel pipe wall
S
mm
2~10
Steel tube length
L
m
25 meters below the
Fin thickness
δ
mm
0.5~4.0
Fin height
h
mm
5~30
Fins spacing (pitch)
t
mm
3.5~40
Steel tube material
Carbon steel, alloy steel, stainless steel
Fin material
Carbon steel, alloy steel, stainless steel
Fin form
Real tooth, open tooth
Heat exchanger, is part of the thermal fluid flow of heat transfer fluid equipment to cold, say again heat exchanger. Heat exchanger is chemical, oil, power, food and other many departments of industry in general equipment, production occupies an important position. The heat exchanger in chemical industry production can be as heater, cooler, condenser, evaporator and the boiling again, more widely.
1,Complete kinds, the scale of production
2,Automatic production mode, the cost is low
tension winding finned tube
High frequency welding spiral finned tube
Name
symbols
Unit
Value
Steel pipe diameter
d
mm
16~140
Steel pipe wall
S
mm
2~10
Steel tube length
L
m
25 meters below the
Fin thickness
δ
mm
0.5~4.0
Fin height
h
mm
5~30
Fins spacing (pitch)
t
mm
3.5~40
Steel tube material
Carbon steel, alloy steel, stainless steel
Fin material
Carbon steel, alloy steel, stainless steel
Fin form
Real tooth, open tooth
Heat exchanger, is part of the thermal fluid flow of heat transfer fluid equipment to cold, say again heat exchanger. Heat exchanger is chemical, oil, power, food and other many departments of industry in general equipment, production occupies an important position. The heat exchanger in chemical industry production can be as heater, cooler, condenser, evaporator and the boiling again, more widely.
tension winding finned tube
tension winding finned tube
1,Production lines, quality is reliable
2,Low cost and stable performance
tension winding finned tube
Single metal finned tube type, specification
Specifications
Fin outside diameter
D(mm)
Fin the roots
d(mm)
Finned tube diameter
di(mm)
Fin pitch
t(mm)
The fin thickness
s(mm)
The highest working temperature
(°C)
The highest working pressure
(MPa)
SGL-26×2.3
26
15
12
2.3
0.3
200
1.5
-30×2.3
30
16
12
2.3
0.3
-36×2.5
36
20
16
2.5
0.3
-38×2.5
38
20
16
2.5
0.3
-42×2.5
42
22
18
2.5
0.35
-44×2.5
44
24
20
2.5
0.35
-44×3.2
44
25
20
3.2
0.35
-48×3.2
48
25
20
3.2
0.35
-50×2.5
50
25
20
2.5
0.35
-55×2.5
55
26
20
2.5
0.35
-57×3.2
57
27
20
3.2
0.4
-60×2.5
60
30
23
2.5
0.4
Heat exchanger, is part of the thermal fluid flow of heat transfer fluid equipment to cold, say again heat exchanger. Heat exchanger is chemical, oil, power, food and other many departments of industry in general equipment, production occupies an important position. The heat exchanger in chemical industry production can be as heater, cooler, condenser, evaporator and the boiling again, more widely.
1,Production lines, quality is reliable
2,Low cost and stable performance
tension winding finned tube
Single metal finned tube type, specification
Specifications
Fin outside diameter
D(mm)
Fin the roots
d(mm)
Finned tube diameter
di(mm)
Fin pitch
t(mm)
The fin thickness
s(mm)
The highest working temperature
(°C)
The highest working pressure
(MPa)
SGL-26×2.3
26
15
12
2.3
0.3
200
1.5
-30×2.3
30
16
12
2.3
0.3
-36×2.5
36
20
16
2.5
0.3
-38×2.5
38
20
16
2.5
0.3
-42×2.5
42
22
18
2.5
0.35
-44×2.5
44
24
20
2.5
0.35
-44×3.2
44
25
20
3.2
0.35
-48×3.2
48
25
20
3.2
0.35
-50×2.5
50
25
20
2.5
0.35
-55×2.5
55
26
20
2.5
0.35
-57×3.2
57
27
20
3.2
0.4
-60×2.5
60
30
23
2.5
0.4
Heat exchanger, is part of the thermal fluid flow of heat transfer fluid equipment to cold, say again heat exchanger. Heat exchanger is chemical, oil, power, food and other many departments of industry in general equipment, production occupies an important position. The heat exchanger in chemical industry production can be as heater, cooler, condenser, evaporator and the boiling again, more widely.
terminal box PV-TH1109-6,180-380W
terminal box
1.Power Handling:180-380W
2.Rated Current:14A
3.TUV approved
terminal box
PV-TH1109-6
Power Handling
180-380W
Rated Voltage
DC 1000V
Rated Current
14A
Application Class
Class A
Protection Class
Class II
Protection Degree
IP65
Temperature Range
-40°C to 85°C
1.Power Handling:180-380W
2.Rated Current:14A
3.TUV approved
terminal box
PV-TH1109-6
Power Handling
180-380W
Rated Voltage
DC 1000V
Rated Current
14A
Application Class
Class A
Protection Class
Class II
Protection Degree
IP65
Temperature Range
-40°C to 85°C
the big Charcoal briquette machine 008613290905800
Charcoal briquette Machine
1. Professional
2. Best selling
3. High quality
Pressure ball machine is mainly used for pressing pulverized coal, coal slime, China coal, coke powder, coking coal and metallurgy powder, refractory etc to the molding of powder material, its characteristic is the molding pressure big, main engine RPM adjustable, equipped with a screw conveying equipment.
Pressure for material molding machine ball requirements:
1, material size in the 90 260 can.
2, material does not allow any metal in. Otherwise it will damage roller surface skin.
3, feeding must meet, appropriate USES adjustable spiral feeder, observation of supply material feeding back to adjust.
Model
Roller dia (mm)
Capacity (t/h)
Motor (kw)
290
290
1-3
5.5
360
360
4-6
7.5
430
430
6-8
11
520
520
8-10
18.5
670
670
10-15
25
800
800
15-22
37
1000
1000
22-30
55
1. Professional
2. Best selling
3. High quality
Pressure ball machine is mainly used for pressing pulverized coal, coal slime, China coal, coke powder, coking coal and metallurgy powder, refractory etc to the molding of powder material, its characteristic is the molding pressure big, main engine RPM adjustable, equipped with a screw conveying equipment.
Pressure for material molding machine ball requirements:
1, material size in the 90 260 can.
2, material does not allow any metal in. Otherwise it will damage roller surface skin.
3, feeding must meet, appropriate USES adjustable spiral feeder, observation of supply material feeding back to adjust.
Model
Roller dia (mm)
Capacity (t/h)
Motor (kw)
290
290
1-3
5.5
360
360
4-6
7.5
430
430
6-8
11
520
520
8-10
18.5
670
670
10-15
25
800
800
15-22
37
1000
1000
22-30
55
the biomass briquette machine
Biocoal Forming Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
the complete set of vertical wind turbine
vertical wind turbine set:
1.Low start-up wind speed
2.Long service life
3.High quality, best price
4.Easy to install
vertical wind turbine set:
Product Name:off Grid Wind Turbine Generation 50W-3KW
Model No.:CTV-50W~3KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
Rated Power(W)
500
1000
2000
3000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
Setup Speed (m/s)
2
2.5
2.5
2.5
Rated Speed(m/s)
8
8
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
OUT DC off grid (V)
24
48
96
220
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
Height of Tower (m)
6
6
6
8
Upper Weight (kg)
67
95
188
217
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The pictures of our VAWT:
1.Low start-up wind speed
2.Long service life
3.High quality, best price
4.Easy to install
vertical wind turbine set:
Product Name:off Grid Wind Turbine Generation 50W-3KW
Model No.:CTV-50W~3KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
Rated Power(W)
500
1000
2000
3000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
Setup Speed (m/s)
2
2.5
2.5
2.5
Rated Speed(m/s)
8
8
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
OUT DC off grid (V)
24
48
96
220
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
Height of Tower (m)
6
6
6
8
Upper Weight (kg)
67
95
188
217
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The pictures of our VAWT:
the hottest seller coconut shell briquette machine
Biocoal Forming Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
48v 40ah lifepo4 electric golf car battery packs
1.high quality, fast charging
2.battery got CE certification
3.without memory effects over 2000cycles
4.environment friendly
Battery model
48V40AH
Nominal voltage
48V
Battery capacity
40AH
Operating current
40A
Charge voltage
57V
Size
L385*w205*H165mm
Weight
About 25kg
Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers’requirement, for further information please feel free to contact us.
2.battery got CE certification
3.without memory effects over 2000cycles
4.environment friendly
Battery model
48V40AH
Nominal voltage
48V
Battery capacity
40AH
Operating current
40A
Charge voltage
57V
Size
L385*w205*H165mm
Weight
About 25kg
Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers’requirement, for further information please feel free to contact us.
the mingyang best selling coconut shell carbonization stove 008613949002032
carbonization furance
1.Easy operate and maintain,
2.higher safety, energy saving
3.High carbonization rate, no smoking
The mingyang best selling coconut shell carbonization stove
Introduction:
The whole gas flow type include the outer stove, three set of inner stoves , and the 3ton hoisting tools.
When one inner stove have been finished carbonization, we will use the hoisting tools hoist the inner stove from the outer stove, then let the inner stove natural cooling, at the same time, we can put another inner stove into the outer stove, which will save a lot of cooling time, so the productivity effect increase a lot, it is the ideal choice for mass production of charcoal.
Features
Easy operate and maintain, higher safety, energy saving
High carbonization rate ,no smoking, little pollution, high efficiency
Newly developed carbonization stove, which can dry the materials with the superfluous energy produced in the process of carbonization. 6-8 hours per stove and can work continuously
The tube of fume extraction will recycle the gas flow which come from the inner stove during the carbonizing process for continue warming the stove, and it will save 70% energy consumption and recycle 95% smoking
technology data
Power
No power
Temperature
600’C
Environment
Totally No pollution ( there are two reasons : the frog and the gas flow will be recycle from the smoke recycle device and use for heating the kiln again
2. We install a special device that can use the liquid gas as the energy to heating the carbonization kiln, and it will not produce any smoke.
Time
This type have three inner stove, when one inner stove finished (6- 8hours ) , use the hoist tools lift the inner stove out let it cooled naturally, at the same time, lift the other one in , 3 inner stove can work continuously. 24 hours can carbonizing 3-4 inner stove
Raw material of the
Outer stove and inner stoves
The raw material of outer stove is heat resistant steel plates and heat preservation refractory materials; the inner stove is the heat resistant steel plates and special steel boiler plate. And the steel plates thickness is 6mm
Transport
The three inner stove can be stack in the outer stove together, save a lot of space,
energy consumption
20-30kg firewood or 15kg liquid gas .This type will save 30% payment
some questions:
ASK: 1. How does carbonization stove make charcoal?
Answer:
The surface of wood (bamboo, wood briquette, nut shell, etc) will ignite spontaneously in the hypoxic condition. And this spontaneous combustion will produce heat. This heat and the external heat source will heat the stove at the same time, when the temperature reach 280 degree, the chemical structure of the wood will be changed by the high-temperature, and after long time heating, changing and decomposing, then we will get the black charcoal, combustible gas, and wood tar. This model furnace will use the fume extraction tube to recycle all the combustible gas and smoking from the entire heat source.
2.
Why it is no pollution ?
Answer:
1. Smoking purification system are used for purify the smoking (can not burning) and filter the wood tar. The smoking through the purification system will become water vapor, and it will not pollute the air.
2. When during the process of carbonizing, there will be some smoke.(can be burning) the smoke can return to the furnace through tube for purifying, after purification , the combustible smoking can be flow into the heating room of the main furnace for heating the stove again,
1.Easy operate and maintain,
2.higher safety, energy saving
3.High carbonization rate, no smoking
The mingyang best selling coconut shell carbonization stove
Introduction:
The whole gas flow type include the outer stove, three set of inner stoves , and the 3ton hoisting tools.
When one inner stove have been finished carbonization, we will use the hoisting tools hoist the inner stove from the outer stove, then let the inner stove natural cooling, at the same time, we can put another inner stove into the outer stove, which will save a lot of cooling time, so the productivity effect increase a lot, it is the ideal choice for mass production of charcoal.
Features
Easy operate and maintain, higher safety, energy saving
High carbonization rate ,no smoking, little pollution, high efficiency
Newly developed carbonization stove, which can dry the materials with the superfluous energy produced in the process of carbonization. 6-8 hours per stove and can work continuously
The tube of fume extraction will recycle the gas flow which come from the inner stove during the carbonizing process for continue warming the stove, and it will save 70% energy consumption and recycle 95% smoking
technology data
Power
No power
Temperature
600’C
Environment
Totally No pollution ( there are two reasons : the frog and the gas flow will be recycle from the smoke recycle device and use for heating the kiln again
2. We install a special device that can use the liquid gas as the energy to heating the carbonization kiln, and it will not produce any smoke.
Time
This type have three inner stove, when one inner stove finished (6- 8hours ) , use the hoist tools lift the inner stove out let it cooled naturally, at the same time, lift the other one in , 3 inner stove can work continuously. 24 hours can carbonizing 3-4 inner stove
Raw material of the
Outer stove and inner stoves
The raw material of outer stove is heat resistant steel plates and heat preservation refractory materials; the inner stove is the heat resistant steel plates and special steel boiler plate. And the steel plates thickness is 6mm
Transport
The three inner stove can be stack in the outer stove together, save a lot of space,
energy consumption
20-30kg firewood or 15kg liquid gas .This type will save 30% payment
some questions:
ASK: 1. How does carbonization stove make charcoal?
Answer:
The surface of wood (bamboo, wood briquette, nut shell, etc) will ignite spontaneously in the hypoxic condition. And this spontaneous combustion will produce heat. This heat and the external heat source will heat the stove at the same time, when the temperature reach 280 degree, the chemical structure of the wood will be changed by the high-temperature, and after long time heating, changing and decomposing, then we will get the black charcoal, combustible gas, and wood tar. This model furnace will use the fume extraction tube to recycle all the combustible gas and smoking from the entire heat source.
2.
Why it is no pollution ?
Answer:
1. Smoking purification system are used for purify the smoking (can not burning) and filter the wood tar. The smoking through the purification system will become water vapor, and it will not pollute the air.
2. When during the process of carbonizing, there will be some smoke.(can be burning) the smoke can return to the furnace through tube for purifying, after purification , the combustible smoking can be flow into the heating room of the main furnace for heating the stove again,
the project of the sandwich panel
the project of sandwich panel
Increase usable area
Sound Insulation,Fireproof
Earthquake Resistance
reusable
This is the house which is contructed with the EPS sandwich in the Austrican. and the house is saved more area. Sound Insulation more than 40 dB. Fireproof and water proof.Earthquake Resistance,ect. what's more, the panels can also be reuse if necessary.
1. The introduction of Economic sandwich board
Wonke Greenboard® is a kind of light weight energy saving wall material taking reinforced fiber cement board as face panel, within cement, EPS, fly ash as core material and forming by one time compound. Our product has features of light weight, high intensity, thin, water & fire proof, heat preservation, sound insulation, quakeproof, low cost and space-saving. EPS & Cement sandwich panel are widely applied to interior wall partition, exterior wall and roof for all kind of constructions. Its birth marks the wall material will appear renewal trend, instead of traditional block, the new architectural thoughts and its outstanding performance meet the requirements of modern architectural environment
2. The specification of sandwich panel
Thickness(mm)
Length(mm)
Width(mm)
Weight(kg/m2)
Tolerance(mm)
50mm
2440mm—
3000mm
610mm
41.00
Length ± 5
Width ± 2
Thickness ± 1
Smoothness ± 1
70mm
59.50
100mm
81.00
120mm
95.50
150mm
120.00
3. The technical reference of the sandwich board
Items
Units
120mm
100mm
75mm
50mm
Volume weight
Kg/m3
750-800
Anti-bending damage load
Times
≥4.0
≥4.0
≥3.0
≥3.0
Anti-pressure strength
MPa
≥3.5
Anti-impact performance
Times
≥5.0
Soften coefficient
≥0.8
Moisture content
%
≤6
≤8
Drying shrinkage value
mm/m
≤0.6
Single-point hanging strength
N
≥1000
Heat-transfer coefficient
W/(m
2
.k)
————
2.95
3.021
3.215
Combustion performance
Grade
A
Fire resistance
H
≥4.5
≥4.0
≥2.5
≥1.0
Sound insulation
dB
≥47
≥42
≥40
≥35
Radiation
A (First Class, no limit of production & distribution )
Conservation of Environment
100% free of asbestos
Increase usable area
Sound Insulation,Fireproof
Earthquake Resistance
reusable
This is the house which is contructed with the EPS sandwich in the Austrican. and the house is saved more area. Sound Insulation more than 40 dB. Fireproof and water proof.Earthquake Resistance,ect. what's more, the panels can also be reuse if necessary.
1. The introduction of Economic sandwich board
Wonke Greenboard® is a kind of light weight energy saving wall material taking reinforced fiber cement board as face panel, within cement, EPS, fly ash as core material and forming by one time compound. Our product has features of light weight, high intensity, thin, water & fire proof, heat preservation, sound insulation, quakeproof, low cost and space-saving. EPS & Cement sandwich panel are widely applied to interior wall partition, exterior wall and roof for all kind of constructions. Its birth marks the wall material will appear renewal trend, instead of traditional block, the new architectural thoughts and its outstanding performance meet the requirements of modern architectural environment
2. The specification of sandwich panel
Thickness(mm)
Length(mm)
Width(mm)
Weight(kg/m2)
Tolerance(mm)
50mm
2440mm—
3000mm
610mm
41.00
Length ± 5
Width ± 2
Thickness ± 1
Smoothness ± 1
70mm
59.50
100mm
81.00
120mm
95.50
150mm
120.00
3. The technical reference of the sandwich board
Items
Units
120mm
100mm
75mm
50mm
Volume weight
Kg/m3
750-800
Anti-bending damage load
Times
≥4.0
≥4.0
≥3.0
≥3.0
Anti-pressure strength
MPa
≥3.5
Anti-impact performance
Times
≥5.0
Soften coefficient
≥0.8
Moisture content
%
≤6
≤8
Drying shrinkage value
mm/m
≤0.6
Single-point hanging strength
N
≥1000
Heat-transfer coefficient
W/(m
2
.k)
————
2.95
3.021
3.215
Combustion performance
Grade
A
Fire resistance
H
≥4.5
≥4.0
≥2.5
≥1.0
Sound insulation
dB
≥47
≥42
≥40
≥35
Radiation
A (First Class, no limit of production & distribution )
Conservation of Environment
100% free of asbestos
thin lithium battery
1.high quality,fast charging
2.high durability with extra power
3.environment friendly
4.very competitive price
Battery model
24V30AH
Nominal voltage
24V
Battery capacity
30AH
Size
150*165*220m
Weight
about 7480g
Max charge current
≤0.5CA
Max discharge current
Constant current ≤15A
Impulse current ≤30A
Cycle life
≥2000 Times
Operating temperature
Charge 0°C-60°C
Discharge -25°C-60°C
Warrenty
1 year
2.high durability with extra power
3.environment friendly
4.very competitive price
Battery model
24V30AH
Nominal voltage
24V
Battery capacity
30AH
Size
150*165*220m
Weight
about 7480g
Max charge current
≤0.5CA
Max discharge current
Constant current ≤15A
Impulse current ≤30A
Cycle life
≥2000 Times
Operating temperature
Charge 0°C-60°C
Discharge -25°C-60°C
Warrenty
1 year
thin lithium battery
1.high quality, fast charging
2.high durability with extra power
3.battery manufacturer
4.pollution-free
5.long cycle life
Battery model
48V10AH
Nominal voltage
48V
Battery capacity
10AH
Operating current
10A
Charge voltage
58.4V
Size
L132*w86*H265mm
Weight
About 5.0kg
Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers'requirement, for further information please feel free to contact us.
2.high durability with extra power
3.battery manufacturer
4.pollution-free
5.long cycle life
Battery model
48V10AH
Nominal voltage
48V
Battery capacity
10AH
Operating current
10A
Charge voltage
58.4V
Size
L132*w86*H265mm
Weight
About 5.0kg
Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers'requirement, for further information please feel free to contact us.
three blades wind generator
1. 400w output
2. CFRP blades
3. low noise
4. easy to install
5. beautiful appearance
2. CFRP blades
3. low noise
4. easy to install
5. beautiful appearance
three blades wind generator
1. 400w output
2. CFRP blades
3. low noise
4. easy to install
5. beautiful appearance
2. CFRP blades
3. low noise
4. easy to install
5. beautiful appearance
three compartment round plate
1.Disposable plate
2.Can be used directly in mic-rowave oven and refrigerator.
3.Eco-friendly,nontoxic,and sanitary production
multifunctional disposable paper plate
Add to My Favorites
Add to My Favorites
Add Product to Favorites
Add Company to Favorites
Product Details:
Dinnerware Type
Dishes & Plates
Material
Paper
Certification
CE / EU, CIQ, EEC, FDA, LFGB, SGS
Feature
Disposable, Eco-Friendly
Place of Origin
Shandong, China (Mainland)
Brand Name
HAIYUN
paper plate
disposable paper plate
Payment & Shipping Terms:
Price:
FOB USD 2500~2700 / Metric Ton
Get Latest Price
Minimum Order Quantity:
Negotiable
Trial Order
Minimum Order Quantity:
10 Metric Ton/Metric Tons
Trial Order
Port:
QINGDAO
Packaging Details:
Outside:Kraft paper carton;Inside:POF bag
Delivery Time:
7--30days after receiving deposit
Payment Terms:
L/C,T/T
Supply Ability:
500 Metric Ton/Metric Tons per Month
Offline View Contact Details« Prev Product
1 2 3 4 5 6 7 ...
Next Product »
Detailed Product Description
1.multifunctional disposable paper plate
2.Eco-friendly,Degradable
3.Water and oil resistant
1The detailed information of products
Our main products are multifunctional disposable paper plate, tray, lunch box, bowl, cup and other paper pulp products. The raw material is reed, wheat straw. The paper pulp products can be widely used in the hotel, the other occasions of outside activities. The sizes of paper pulp products that we usually produced are as follows:
Item
Size(mm)
7” Australia round plate
175*15.8
8” Australia round plate
200*17.9
9” Australia round plate
225*19.6
450ml lunch box
172(L)*246(W)*36/15(H)
600ml lunch box
182(L)*271(W)*49.5/20(H)
five department tray
282(L)*220(W)*35/14(H)
And we can produce according to your requirement.
2Corporation Introduction
Established in 2004, Shandong Haiyun Ecological Co., Ltd situated in Siyuan Lake Industrial Park, China mainly deals in the line of manufacturing and distribution of pulp, paper, pulp molding products with the raw material of non-wood plant fiber such as reed and wheat straw. Its existing staff is about 760 including 280 engineers and technicians.
Equipped with full-automatic and EAMC intelligence pulp molding production line, The products that we produced are of such characteristic as safety, health, high strength, non-deformation and non-leakage. Due to eco-friendly, superior quality and reasonable price, our products are widely recognized and used in many industry fields, such as food, agriculture, electronics, medicine, building materials, war industry etc. Since we have our own import and export rights, now the products can be easily exported to Europe, America, Japan, Korea and other international markets.
3Certificate
Language Option
Switch languge to help reading:
French German Italian Russian Spanish Portuguese Korean Arabic
French
German
Italian
Russian
Spanish
Portuguese
Korean
Arabic
2.Can be used directly in mic-rowave oven and refrigerator.
3.Eco-friendly,nontoxic,and sanitary production
multifunctional disposable paper plate
Add to My Favorites
Add to My Favorites
Add Product to Favorites
Add Company to Favorites
Product Details:
Dinnerware Type
Dishes & Plates
Material
Paper
Certification
CE / EU, CIQ, EEC, FDA, LFGB, SGS
Feature
Disposable, Eco-Friendly
Place of Origin
Shandong, China (Mainland)
Brand Name
HAIYUN
paper plate
disposable paper plate
Payment & Shipping Terms:
Price:
FOB USD 2500~2700 / Metric Ton
Get Latest Price
Minimum Order Quantity:
Negotiable
Trial Order
Minimum Order Quantity:
10 Metric Ton/Metric Tons
Trial Order
Port:
QINGDAO
Packaging Details:
Outside:Kraft paper carton;Inside:POF bag
Delivery Time:
7--30days after receiving deposit
Payment Terms:
L/C,T/T
Supply Ability:
500 Metric Ton/Metric Tons per Month
Offline View Contact Details« Prev Product
1 2 3 4 5 6 7 ...
Next Product »
Detailed Product Description
1.multifunctional disposable paper plate
2.Eco-friendly,Degradable
3.Water and oil resistant
1The detailed information of products
Our main products are multifunctional disposable paper plate, tray, lunch box, bowl, cup and other paper pulp products. The raw material is reed, wheat straw. The paper pulp products can be widely used in the hotel, the other occasions of outside activities. The sizes of paper pulp products that we usually produced are as follows:
Item
Size(mm)
7” Australia round plate
175*15.8
8” Australia round plate
200*17.9
9” Australia round plate
225*19.6
450ml lunch box
172(L)*246(W)*36/15(H)
600ml lunch box
182(L)*271(W)*49.5/20(H)
five department tray
282(L)*220(W)*35/14(H)
And we can produce according to your requirement.
2Corporation Introduction
Established in 2004, Shandong Haiyun Ecological Co., Ltd situated in Siyuan Lake Industrial Park, China mainly deals in the line of manufacturing and distribution of pulp, paper, pulp molding products with the raw material of non-wood plant fiber such as reed and wheat straw. Its existing staff is about 760 including 280 engineers and technicians.
Equipped with full-automatic and EAMC intelligence pulp molding production line, The products that we produced are of such characteristic as safety, health, high strength, non-deformation and non-leakage. Due to eco-friendly, superior quality and reasonable price, our products are widely recognized and used in many industry fields, such as food, agriculture, electronics, medicine, building materials, war industry etc. Since we have our own import and export rights, now the products can be easily exported to Europe, America, Japan, Korea and other international markets.
3Certificate
Language Option
Switch languge to help reading:
French German Italian Russian Spanish Portuguese Korean Arabic
French
German
Italian
Russian
Spanish
Portuguese
Korean
Arabic
timber powder
timber powder
1.Product name:Wood powder
2.Size: 50~325mesh
3.Material: poplar or hard wood.
4.Colour: White or brown colour
timber powder
1.Product name:Wood powder
2.Size: 50~325mesh
3.Material: poplar or hard wood.
4.Capacity: 500MT per month.
5.Colour: White or brown colour.
6.Packing: 30kg/bag ,500kg/bag in bulk packing or as requested.
7.Quality: Ash content under 15%, moisture under 10%.
8.Usage: Suitable for making paper, incense stick, WPC products, process leather, highway, coating, wire, cat litter, household products stuffing etc.
9.My factory produce quality wood powder with 50-325mesh,ash under 15%,moisture under 5%,suitable for making incense stick,WPC etc
1.Product name:Wood powder
2.Size: 50~325mesh
3.Material: poplar or hard wood.
4.Colour: White or brown colour
timber powder
1.Product name:Wood powder
2.Size: 50~325mesh
3.Material: poplar or hard wood.
4.Capacity: 500MT per month.
5.Colour: White or brown colour.
6.Packing: 30kg/bag ,500kg/bag in bulk packing or as requested.
7.Quality: Ash content under 15%, moisture under 10%.
8.Usage: Suitable for making paper, incense stick, WPC products, process leather, highway, coating, wire, cat litter, household products stuffing etc.
9.My factory produce quality wood powder with 50-325mesh,ash under 15%,moisture under 5%,suitable for making incense stick,WPC etc
timber powder
timber powder
1.Product name:Wood powder
2.Size: 50~325mesh
3.Material: poplar or hard wood.
4.Colour: White or brown colour
timber powder
1.Product name:Wood powder
2.Size: 50~325mesh
3.Material: poplar or hard wood.
4.Capacity: 500MT per month.
5.Colour: White or brown colour.
6.Packing: 30kg/bag ,500kg/bag in bulk packing or as requested.
7.Quality: Ash content under 15%, moisture under 10%.
8.Usage: Suitable for making paper, incense stick, WPC products, process leather, highway, coating, wire, cat litter, household products stuffing etc.
9.My factory produce quality wood powder with 50-325mesh,ash under 15%,moisture under 5%,suitable for making incense stick,WPC etc
1.Product name:Wood powder
2.Size: 50~325mesh
3.Material: poplar or hard wood.
4.Colour: White or brown colour
timber powder
1.Product name:Wood powder
2.Size: 50~325mesh
3.Material: poplar or hard wood.
4.Capacity: 500MT per month.
5.Colour: White or brown colour.
6.Packing: 30kg/bag ,500kg/bag in bulk packing or as requested.
7.Quality: Ash content under 15%, moisture under 10%.
8.Usage: Suitable for making paper, incense stick, WPC products, process leather, highway, coating, wire, cat litter, household products stuffing etc.
9.My factory produce quality wood powder with 50-325mesh,ash under 15%,moisture under 5%,suitable for making incense stick,WPC etc
timber powder
My factory produce quality timber powder with 50-325mesh,ash under 15%,moisture under 5%,suitable for making incense stick,WPC e
Timber powder
Size: 50~325mesh
Material: poplar or hard wood.
Capacity: 500MT per month.
Colour: White or dark colour.
Packing: 30kg/bag ,500kg/bag in bulk packing or as requested.
Quality: Ash content under 15%, moisture under 5%.
Usage: Suitable for making paper, incense stick, WPC products and as filling materials in making some other industrial products etc.
Timber powder
Size: 50~325mesh
Material: poplar or hard wood.
Capacity: 500MT per month.
Colour: White or dark colour.
Packing: 30kg/bag ,500kg/bag in bulk packing or as requested.
Quality: Ash content under 15%, moisture under 5%.
Usage: Suitable for making paper, incense stick, WPC products and as filling materials in making some other industrial products etc.
100W Small vertical wind generator
Small vertical wind generator
Small maglev
Light wind power generator
Light weight
beautiful
Small vertical wind generator
Hangzhou Shenle Technology Co., Ltd. is committed to
(1) wind energy into electricity,R & D and manufacturing Rather there Arts culture with Chinese characteristics, the landscape of wind turbine,Owns a number of patented technologies.(our engineering team will continue to design new products to meet the market demand, and pay attention to our website)
(2) production intelligent building public corridor electricity apportion device,This product development successfully solved completely corridor public electricity charges. Install this product will be massive saving electricity company charge link and labor cost.
About
Wind generator
Our wind generators are ancient Chinese culture art and modern science and technology, combining the perfect products, Strong visual and environmental photograph union, Have strong Chinese festival atmosphere of high-end products. Have China ceremoniously festal atmosphere of high-end products. Advanced design (maglev), Light weight, high efficiency and low noise.!
For our cities, villages, villas, road, tunnel, building, park, square, scenic spot, island, ships, the camps and mountainous place such as supply natural quiet green energy systems, Is a kind of energy conservation, environmental protection, landscaping of green energy.
Our mission
Since the industrial revolution, humans have already consumed much of the mineral resources, In recent years to various environment change in greenhouse gas emissions, excessive to make global warming, Cause a series of disasters, we shall review is no reflection in daily life's performance?
Everyone is the earth's people, please try your ability to energy consumption expenditure, don't forget to several thousand years later we children living environment.
As long as the earth rotates, the wind that is inexhaustible infinite energy so wind power will be benefit to global environmental efficient technology, we can in order to continuously innovation the technology but unremitting
Small maglev
Light wind power generator
Light weight
beautiful
Small vertical wind generator
Hangzhou Shenle Technology Co., Ltd. is committed to
(1) wind energy into electricity,R & D and manufacturing Rather there Arts culture with Chinese characteristics, the landscape of wind turbine,Owns a number of patented technologies.(our engineering team will continue to design new products to meet the market demand, and pay attention to our website)
(2) production intelligent building public corridor electricity apportion device,This product development successfully solved completely corridor public electricity charges. Install this product will be massive saving electricity company charge link and labor cost.
About
Wind generator
Our wind generators are ancient Chinese culture art and modern science and technology, combining the perfect products, Strong visual and environmental photograph union, Have strong Chinese festival atmosphere of high-end products. Have China ceremoniously festal atmosphere of high-end products. Advanced design (maglev), Light weight, high efficiency and low noise.!
For our cities, villages, villas, road, tunnel, building, park, square, scenic spot, island, ships, the camps and mountainous place such as supply natural quiet green energy systems, Is a kind of energy conservation, environmental protection, landscaping of green energy.
Our mission
Since the industrial revolution, humans have already consumed much of the mineral resources, In recent years to various environment change in greenhouse gas emissions, excessive to make global warming, Cause a series of disasters, we shall review is no reflection in daily life's performance?
Everyone is the earth's people, please try your ability to energy consumption expenditure, don't forget to several thousand years later we children living environment.
As long as the earth rotates, the wind that is inexhaustible infinite energy so wind power will be benefit to global environmental efficient technology, we can in order to continuously innovation the technology but unremitting
48v 40ah lifepo4 electric golf car battery packs
1.high quality, fast charging
2.battery got CE certification
3.without memory effects over 2000cycles
4.environment friendly
Battery model
48V40AH
Nominal voltage
48V
Battery capacity
40AH
Operating current
40A
Charge voltage
57V
Size
L385*w205*H165mm
Weight
About 25kg
Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers’requirement, for further information please feel free to contact us.
2.battery got CE certification
3.without memory effects over 2000cycles
4.environment friendly
Battery model
48V40AH
Nominal voltage
48V
Battery capacity
40AH
Operating current
40A
Charge voltage
57V
Size
L385*w205*H165mm
Weight
About 25kg
Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers’requirement, for further information please feel free to contact us.
timber powder
My factory produce quality wood powder with 50-325mesh,ash under 15%,moisture under 5%,suitable for making incense stick,WPC etc
Wood powder
Size: 50~325mesh
Material: poplar or hard wood.
Capacity: 500MT per month.
Colour: White or dark colour.
Packing: 30kg/bag ,500kg/bag in bulk packing or as requested.
Quality: Ash content under 15%, moisture under 5%.
Usage: Suitable for making paper, incense stick, WPC products and as filling materials in making some other industrial products etc.
Wood powder
Size: 50~325mesh
Material: poplar or hard wood.
Capacity: 500MT per month.
Colour: White or dark colour.
Packing: 30kg/bag ,500kg/bag in bulk packing or as requested.
Quality: Ash content under 15%, moisture under 5%.
Usage: Suitable for making paper, incense stick, WPC products and as filling materials in making some other industrial products etc.
time-delay booster
Time-delay booster is detonated by percussion detonator, after a certian time delay output energy to detonate next explosives.
The time-delay booster is detonated by the detonation wave output by percussion detonator. After a preset time, the time-delay booster will output detonation wave, which detonate the booster, detonating cord and charges.
specifications
Code
O.D
Length
Base load
Temp rating
Delay time
HgMp-28A-HY/11-0
φ48mm
297mm
0.98g HMX
160/48h
3±1min
HgMp-28/1-0
φ48mm
297mm
0.98g HMX
160/48h
6±1min
HgMp-28D/11-0
φ48mm
414mm
0.98g HMX
160/48h
10±1min
HgMp-28-DGC/1-0
φ48mm
549mm
0.98g HMX
160/48h
15±1min
HgMp-28G-HY/11-0
φ48mm
302mm
0.98g HNS
200/48h
6±1min
HgMp-29G-DQ/1-0
φ48mm
419mm
0.98g HNS
200/48h
10±1min
The time-delay booster is detonated by the detonation wave output by percussion detonator. After a preset time, the time-delay booster will output detonation wave, which detonate the booster, detonating cord and charges.
specifications
Code
O.D
Length
Base load
Temp rating
Delay time
HgMp-28A-HY/11-0
φ48mm
297mm
0.98g HMX
160/48h
3±1min
HgMp-28/1-0
φ48mm
297mm
0.98g HMX
160/48h
6±1min
HgMp-28D/11-0
φ48mm
414mm
0.98g HMX
160/48h
10±1min
HgMp-28-DGC/1-0
φ48mm
549mm
0.98g HMX
160/48h
15±1min
HgMp-28G-HY/11-0
φ48mm
302mm
0.98g HNS
200/48h
6±1min
HgMp-29G-DQ/1-0
φ48mm
419mm
0.98g HNS
200/48h
10±1min
ton bag
TON BAG
Loadweight less than 1 TON
TON BAG
Materials: Virgin PP
Style: U-Panel, Tubular, Baffled bags, Anti-static FIBCs, Baffled FIBC, Sift-proof FIBC, Vented FIBC, Food Grade FIBC, Danger-goods packaging FIBCs and other Special Bags
S.F.: from 3:1 to 6:1.
Fabric Colour: white, yellow, blue, green, black etc.
Size: as required
Lifting Style: single loops, two loops, 4 cross corner loops or as required
Top: open, filling spout, duffle spout or as required
Bottom: flat, discharging spout etc.
Printing: as required
Liner: PE liner or lamination
Usage: For packing 500kgs ~ 2000kgs mineral, chemical, food, starch, feed, cement, coal, powdered or granular materials, also can pack dangerous products for Group II, III.
Other Specification: as required
Certificate: ISO9001-2008
Loadweight less than 1 TON
TON BAG
Materials: Virgin PP
Style: U-Panel, Tubular, Baffled bags, Anti-static FIBCs, Baffled FIBC, Sift-proof FIBC, Vented FIBC, Food Grade FIBC, Danger-goods packaging FIBCs and other Special Bags
S.F.: from 3:1 to 6:1.
Fabric Colour: white, yellow, blue, green, black etc.
Size: as required
Lifting Style: single loops, two loops, 4 cross corner loops or as required
Top: open, filling spout, duffle spout or as required
Bottom: flat, discharging spout etc.
Printing: as required
Liner: PE liner or lamination
Usage: For packing 500kgs ~ 2000kgs mineral, chemical, food, starch, feed, cement, coal, powdered or granular materials, also can pack dangerous products for Group II, III.
Other Specification: as required
Certificate: ISO9001-2008
ton bag
For packing 500kgs ~ 2000kgs mineral, chemical, food, starch, feed, cement, coal, powdered or granular materials
Detailed Product Description
Any Bulk bag, may be laminated or unlaminated cannot guarantee a 100% contamination free handling unless it is safe guarded with the Sift proof Seams. Also very popularly known as the Dust proof Seams, it is made of a special material called yarn(polypropylene only).This fluffy material is put in the filler cord machines to make the filler cord, which is then stitched in the side, top or bottom seams of the bulk bags.
These Sift proof seams may broadly be of three types, depending on the application of the FIBCs:
Single sift proof seams
Double sift proof seams
Triple sift proof seams
Detailed Product Description
Any Bulk bag, may be laminated or unlaminated cannot guarantee a 100% contamination free handling unless it is safe guarded with the Sift proof Seams. Also very popularly known as the Dust proof Seams, it is made of a special material called yarn(polypropylene only).This fluffy material is put in the filler cord machines to make the filler cord, which is then stitched in the side, top or bottom seams of the bulk bags.
These Sift proof seams may broadly be of three types, depending on the application of the FIBCs:
Single sift proof seams
Double sift proof seams
Triple sift proof seams
ton bag
TON BAG
Loadweight less than 0.5 TON
TON BAG
Materials: Virgin PP
Style: U-Panel, Tubular, Baffled bags, Anti-static FIBCs, Baffled FIBC, Sift-proof FIBC, Vented FIBC, Food Grade FIBC, Danger-goods packaging FIBCs and other Special Bags
S.F.: from 3:1 to 6:1.
Fabric Colour: white, yellow, blue, green, black etc.
Size: as required
Lifting Style: single loops, two loops, 4 cross corner loops or as required
Top: open, filling spout, duffle spout or as required
Bottom: flat, discharging spout etc.
Printing: as required
Liner: PE liner or lamination
Usage: For packing 500kgs ~ 2000kgs mineral, chemical, food, starch, feed, cement, coal, powdered or granular materials, also can pack dangerous products for Group II, III.
Other Specification: as required
Certificate: ISO9001-2008
Loadweight less than 0.5 TON
TON BAG
Materials: Virgin PP
Style: U-Panel, Tubular, Baffled bags, Anti-static FIBCs, Baffled FIBC, Sift-proof FIBC, Vented FIBC, Food Grade FIBC, Danger-goods packaging FIBCs and other Special Bags
S.F.: from 3:1 to 6:1.
Fabric Colour: white, yellow, blue, green, black etc.
Size: as required
Lifting Style: single loops, two loops, 4 cross corner loops or as required
Top: open, filling spout, duffle spout or as required
Bottom: flat, discharging spout etc.
Printing: as required
Liner: PE liner or lamination
Usage: For packing 500kgs ~ 2000kgs mineral, chemical, food, starch, feed, cement, coal, powdered or granular materials, also can pack dangerous products for Group II, III.
Other Specification: as required
Certificate: ISO9001-2008
Thursday, February 10, 2011
top quality audio cable from professional manufacture
auido cable
applies in multiple stereo connections
smart and efficient transmission signals
lowest price and best service
top quality audio cable from professional manufacture
Item Name: HI-FI audio Cable
Note:
1) Customized cables are acceptable,
2) Bare copper or CCA or Tinned copper conductor negotiable
3) Special requirements are available, like ZR, NH, WD, Anti-sour or Anti-Oil cable
4) RV series electric wire is suitable for household appliance wiring, meter electronic equipment, automatic device with rated AC voltage 300/300V
Product Specifications
:
RVH Advanced Fancy Series Transparent Speaker Cable
1.
Product CODE
: XL-3127.Conductor: Stranded Bare Copper or Tinned Copper
3.
Conductor No
./mm:500/0.10
5.
Max strand pitch
:86.0
6.Max conductor resistance at 20
o
C: 4.42
7.
Insulation:
Transparent&resist Oxidation&resist uv PVC
8.
Insulation Thickness
/mm: 1.65
9.
Average external diameter or diameter/mm
: Lower: 5.4×11.1Limit: 5.8×11.5
10.
Work Temperature
:-40
o
C~+60
o
C
11.
Standards
: AMPXL standards of enterprises
thanks for taking time to skim this,please never hesitate to let me know if you interested in,i am always here to provide you the best service!
applies in multiple stereo connections
smart and efficient transmission signals
lowest price and best service
top quality audio cable from professional manufacture
Item Name: HI-FI audio Cable
Note:
1) Customized cables are acceptable,
2) Bare copper or CCA or Tinned copper conductor negotiable
3) Special requirements are available, like ZR, NH, WD, Anti-sour or Anti-Oil cable
4) RV series electric wire is suitable for household appliance wiring, meter electronic equipment, automatic device with rated AC voltage 300/300V
Product Specifications
:
RVH Advanced Fancy Series Transparent Speaker Cable
1.
Product CODE
: XL-3127.Conductor: Stranded Bare Copper or Tinned Copper
3.
Conductor No
./mm:500/0.10
5.
Max strand pitch
:86.0
6.Max conductor resistance at 20
o
C: 4.42
7.
Insulation:
Transparent&resist Oxidation&resist uv PVC
8.
Insulation Thickness
/mm: 1.65
9.
Average external diameter or diameter/mm
: Lower: 5.4×11.1Limit: 5.8×11.5
10.
Work Temperature
:-40
o
C~+60
o
C
11.
Standards
: AMPXL standards of enterprises
thanks for taking time to skim this,please never hesitate to let me know if you interested in,i am always here to provide you the best service!
trailer-mounted drilling rig
trailer-mounted drilling rig
1.standard:API Spec Q1,4F,7k,8C
2.competitive price
3.deliver promptly
4.High quality service
trailer-mounted drilling rig
Main technical specification for trailer-mounted drilling rigs
Model
ZJ20/1580CT
ZJ30/1700CT
ZJ30/1700DBT
ZJ40/2500CT
ZJ40/2500DBT
Drilling depth (ft)
6600(41/2DP)
10000(41/2DP)
12000(31/2DP)
13000(41/2DP)
13000(41/2DP)
5900(5DP)
6600(5DP)
10000(41/2DP)
10000(5DP)
10000(5DP)
Max hook load (lbs)
350000
400000
400000
500000
500000
Hook speed
(ft/s)
0.67~4.92
Mast height
(ft)
118/125
Derrick type
Mast type or erective sections
Height of drill floor (ft)
14.76
19.69
18.06
19.69
19.69~21.98
Engine model
CAT3412 DITA
Or C-16 ATAAC
2×CAT 3408C DITA
or 2×C-15 ATAAC
3508B+SR4B diesel generator set
CAT 3412 DITA
Or C-16 ATAAC
3508B+SR4B diesel generator set
Engine power (NO.×hp)
650
or 660
2×475
2×1341+805
2×650
or 2×660
2×1676+805
Transmission mode
Hydraulic+ Mechanical
Hydraulic+ Mechanical
VFD
Hydraulic+ Mechanical
VFD
Model of the transmission box
S6610HR
2×S5610HR
TZJ30
2×S6610HR
TZJ40
Traveling system
4×5
5×6
4×5
5×6
5×6
Model of the drawworks
JC20CT
JC30CT
JC30DBT
JC40CT
JC40DBT
Main brake
Disc
Disc
Disc
Disc
Disc
Auxiliary brake
WCB224
WCB324
DWS40
WCB236
DWS40
Main wireline diameter (in)
1 1/8
1 1/4
Model of the hook block
YG160
YG180
YG180
YG225
YG225
Swivel model
SL160
XSL225
XSL225
XSL225
XSL225
Model of rotary table
ZP175
ZP275
ZP205
ZP275
ZP275
Power for mud
pump(hp/set)
791
791/2
1000/2
1287/2
1287/2
Working pressure of the hydraulic system (psi)
2002
Working pressure of the air system (psi)
143
1.standard:API Spec Q1,4F,7k,8C
2.competitive price
3.deliver promptly
4.High quality service
trailer-mounted drilling rig
Main technical specification for trailer-mounted drilling rigs
Model
ZJ20/1580CT
ZJ30/1700CT
ZJ30/1700DBT
ZJ40/2500CT
ZJ40/2500DBT
Drilling depth (ft)
6600(41/2DP)
10000(41/2DP)
12000(31/2DP)
13000(41/2DP)
13000(41/2DP)
5900(5DP)
6600(5DP)
10000(41/2DP)
10000(5DP)
10000(5DP)
Max hook load (lbs)
350000
400000
400000
500000
500000
Hook speed
(ft/s)
0.67~4.92
Mast height
(ft)
118/125
Derrick type
Mast type or erective sections
Height of drill floor (ft)
14.76
19.69
18.06
19.69
19.69~21.98
Engine model
CAT3412 DITA
Or C-16 ATAAC
2×CAT 3408C DITA
or 2×C-15 ATAAC
3508B+SR4B diesel generator set
CAT 3412 DITA
Or C-16 ATAAC
3508B+SR4B diesel generator set
Engine power (NO.×hp)
650
or 660
2×475
2×1341+805
2×650
or 2×660
2×1676+805
Transmission mode
Hydraulic+ Mechanical
Hydraulic+ Mechanical
VFD
Hydraulic+ Mechanical
VFD
Model of the transmission box
S6610HR
2×S5610HR
TZJ30
2×S6610HR
TZJ40
Traveling system
4×5
5×6
4×5
5×6
5×6
Model of the drawworks
JC20CT
JC30CT
JC30DBT
JC40CT
JC40DBT
Main brake
Disc
Disc
Disc
Disc
Disc
Auxiliary brake
WCB224
WCB324
DWS40
WCB236
DWS40
Main wireline diameter (in)
1 1/8
1 1/4
Model of the hook block
YG160
YG180
YG180
YG225
YG225
Swivel model
SL160
XSL225
XSL225
XSL225
XSL225
Model of rotary table
ZP175
ZP275
ZP205
ZP275
ZP275
Power for mud
pump(hp/set)
791
791/2
1000/2
1287/2
1287/2
Working pressure of the hydraulic system (psi)
2002
Working pressure of the air system (psi)
143
transparent honeycomb
transparent honeycomb:
Lightweight stiffness strength
Insulated
Fire resistant,antibacteria,anti-mildew
Corrosion resistant
Polycore transparent honeycomb is specially three dimensional structure,so it's more steady and equilibrium than other two dimensional honeycomb structure. PC honeycomb core stand by tightly to provide excellent compressive strength,besides PC honeycomb holds following characteristics, so that bring widly application in different project and fields.
-- Lightweight stiffness strength
-- Insulated
-- Fire resistant
-- Corrosion resistant
-- Fungi resistant
-- Energy absorption
-- Excellent dielectric properties
-- Good thermal and electric insulator
-- temperature -40 + 110 celsius degree
-- Available transparent and in colors
Application:
Polycore PC honeycomb can apply into window to save energy consumption,the window installed with transparent PC honeycomb can lessen heat loss 80 percent than common window;
Polycore PC honeycomb can directly apply into farm glasshouse;Polycore tranasparent PC honeycomb plates can be applied in solar air heating,warming,drying.
Built-in Collecting and storing solar energy heater with Polycore pc honeycomb run in low or high sunshine efficiency is better than vacuum heater. Solar heater with PC honeycomb run stable in winter and price is cheaper than vacuum heater,easy to match to building roof.
Honeycomb activated carbon filter is composed of the Polycore PC honeycomb structural and activated carbon granules or powder. It is not only easy to be assembled but also competent for adsorption. Mainly used for air purification, removing volatile organic compounds and the dust,smoke stench, toluene,polluting substances such as methanol in the airconditioner.Honeycomb actived carbon filter widely used for air purifier,Air conditioner, Air-conditioning fan,The exhaust air production equipment and family health supplies.
Polycore PC Honeycomb act as structure to delete sand in water drainage ,life and industrual water supply deposition,liquide waste deposition grease partition and trail sand condensation.
Polycore pc honeycomb apply into wind tunnels grilles, sandwich cores, radomes,antennae,skylights,energy absorbing structures and TIM fileds.
Avalibility:
Available corecell diameter: 3.0mm---7.0mm
Common dimension: 1300x600mm
Biggest dimenstion:1240x2750mm
Thickness: 2mm---400mm Tolerance:+/-0.5mm
Common corecell diameter we supplying is 3.5mm , 6.0mm and 7.0mm,if you need other corecell we can make it too (order quantity is reach to 40c once time).
Common length is within 1300mm,width and thickness is made according to customer requirement. There are transparent,grey and black can be selected as color.
Special dimension,corecell,color,tolerance,shape can be made according to clients request.
Lightweight stiffness strength
Insulated
Fire resistant,antibacteria,anti-mildew
Corrosion resistant
Polycore transparent honeycomb is specially three dimensional structure,so it's more steady and equilibrium than other two dimensional honeycomb structure. PC honeycomb core stand by tightly to provide excellent compressive strength,besides PC honeycomb holds following characteristics, so that bring widly application in different project and fields.
-- Lightweight stiffness strength
-- Insulated
-- Fire resistant
-- Corrosion resistant
-- Fungi resistant
-- Energy absorption
-- Excellent dielectric properties
-- Good thermal and electric insulator
-- temperature -40 + 110 celsius degree
-- Available transparent and in colors
Application:
Polycore PC honeycomb can apply into window to save energy consumption,the window installed with transparent PC honeycomb can lessen heat loss 80 percent than common window;
Polycore PC honeycomb can directly apply into farm glasshouse;Polycore tranasparent PC honeycomb plates can be applied in solar air heating,warming,drying.
Built-in Collecting and storing solar energy heater with Polycore pc honeycomb run in low or high sunshine efficiency is better than vacuum heater. Solar heater with PC honeycomb run stable in winter and price is cheaper than vacuum heater,easy to match to building roof.
Honeycomb activated carbon filter is composed of the Polycore PC honeycomb structural and activated carbon granules or powder. It is not only easy to be assembled but also competent for adsorption. Mainly used for air purification, removing volatile organic compounds and the dust,smoke stench, toluene,polluting substances such as methanol in the airconditioner.Honeycomb actived carbon filter widely used for air purifier,Air conditioner, Air-conditioning fan,The exhaust air production equipment and family health supplies.
Polycore PC Honeycomb act as structure to delete sand in water drainage ,life and industrual water supply deposition,liquide waste deposition grease partition and trail sand condensation.
Polycore pc honeycomb apply into wind tunnels grilles, sandwich cores, radomes,antennae,skylights,energy absorbing structures and TIM fileds.
Avalibility:
Available corecell diameter: 3.0mm---7.0mm
Common dimension: 1300x600mm
Biggest dimenstion:1240x2750mm
Thickness: 2mm---400mm Tolerance:+/-0.5mm
Common corecell diameter we supplying is 3.5mm , 6.0mm and 7.0mm,if you need other corecell we can make it too (order quantity is reach to 40c once time).
Common length is within 1300mm,width and thickness is made according to customer requirement. There are transparent,grey and black can be selected as color.
Special dimension,corecell,color,tolerance,shape can be made according to clients request.
treatment wastewater
treatment wastewater
Biogas can be collected and used
No smell gas out
treatment wastewater
for
home water recycling
and biogas
The system is
composed of
two 10 m3 PUXIN biogas plants, pipe routes, gas purify devices and gas appliances or small power biogas generator.
The system is mainly
applied to
domestic house to treat sewage and food waste.
Comparing to normal septic tank system PUXIN domestic anaerobic septic tank system has the flowing
ADVANTAGES:
No smell gas out
Water out much cleaner
The Puxin Biogas Plant is composed of
a concrete digester that is built with a steel mould provided by us, a glass fibre reinforced plastic gas-holder and a concrete or glass fibre reinforced plastic cover.
The digester is
6 or 10 m3
of capacity.
The gasholder is 1.6 m of diameter, 0.6 m of height and 1 m3 of capacity.
Biogas can be collected and used
No smell gas out
treatment wastewater
for
home water recycling
and biogas
The system is
composed of
two 10 m3 PUXIN biogas plants, pipe routes, gas purify devices and gas appliances or small power biogas generator.
The system is mainly
applied to
domestic house to treat sewage and food waste.
Comparing to normal septic tank system PUXIN domestic anaerobic septic tank system has the flowing
ADVANTAGES:
No smell gas out
Water out much cleaner
The Puxin Biogas Plant is composed of
a concrete digester that is built with a steel mould provided by us, a glass fibre reinforced plastic gas-holder and a concrete or glass fibre reinforced plastic cover.
The digester is
6 or 10 m3
of capacity.
The gasholder is 1.6 m of diameter, 0.6 m of height and 1 m3 of capacity.
48v 40ah lifepo4 electric golf car battery packs
1.high quality, fast charging
2.battery manufacturer
3.without memory effects over 2000cycles
4.environment friendly
Battery model
48V40AH
Nominal voltage
48V
Battery capacity
40AH
Operating current
40A
Charge voltage
57V
Size
L385*w205*H165mm
Weight
About 25kg
Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers’requirement, for further information please feel free to contact us.
2.battery manufacturer
3.without memory effects over 2000cycles
4.environment friendly
Battery model
48V40AH
Nominal voltage
48V
Battery capacity
40AH
Operating current
40A
Charge voltage
57V
Size
L385*w205*H165mm
Weight
About 25kg
Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers’requirement, for further information please feel free to contact us.
turbine blade
wind turbine blade
WT-80p-10kw
blades made by Aerosa have excellent high efficient,anticorrosion,high intension.
wind turbine blade
WT-80
blades made by Aerosa have excellent high efficient,anticorrosion,high intension.
and high quality with reasonable price.
the technical paremeters of WT-80
Rotor Diameter: 8m
Generator Rated Power: 10/15kw
Number of Blade:3
Rated wind speed: 10/132m/s
Start wind speed: 3.5 m/s
Max wind speed: 70 m/s
1. Blades
Aerosa can provide the whole sets of blades, whose length from 1 meters to 29 meters, rated output from 300w to 1200Kw.
Furthermore, according to the requirement of customers, Aerosa can design and manufacture the blades with different power and in different wind conditions.
2. Blades Repairing, Replacing and Maintenance
After mastered blades repair and replace technology, Aerosa has repaired or replaced hundreds of blades for several wind power plants in china. At the same time, Aerosa has accumulated a lot of practice experience. Now Aerosa can repair or replace all kinds of blades in time. It is very reliable and economic.
WT-80p-10kw
blades made by Aerosa have excellent high efficient,anticorrosion,high intension.
wind turbine blade
WT-80
blades made by Aerosa have excellent high efficient,anticorrosion,high intension.
and high quality with reasonable price.
the technical paremeters of WT-80
Rotor Diameter: 8m
Generator Rated Power: 10/15kw
Number of Blade:3
Rated wind speed: 10/132m/s
Start wind speed: 3.5 m/s
Max wind speed: 70 m/s
1. Blades
Aerosa can provide the whole sets of blades, whose length from 1 meters to 29 meters, rated output from 300w to 1200Kw.
Furthermore, according to the requirement of customers, Aerosa can design and manufacture the blades with different power and in different wind conditions.
2. Blades Repairing, Replacing and Maintenance
After mastered blades repair and replace technology, Aerosa has repaired or replaced hundreds of blades for several wind power plants in china. At the same time, Aerosa has accumulated a lot of practice experience. Now Aerosa can repair or replace all kinds of blades in time. It is very reliable and economic.
turbine blade
wind turbine blade
WT-152
blades made by Aerosa have excellent high efficient,anticorrosion,high intension.
wind turbine blade
WT-152
blades made by Aerosa have excellent high efficient,anticorrosion,high intension.
and high quality with reasonable price.
the technical paremeters of WT-152
Rotor Diameter: 15.2m
Generator Rated Power: 55/100kw
Number of Blade:3
Rated wind speed: 12/14m/s
Start wind speed: 4 m/s
Max wind speed: 70 m/s
1. Blades
Aerosa can provide the whole sets of blades, whose length from 1 meters to 29 meters, rated output from 300w to 1200Kw.
Furthermore, according to the requirement of customers, Aerosa can design and manufacture the blades with different power and in different wind conditions.
2. Blades Repairing, Replacing and Maintenance
After mastered blades repair and replace technology, Aerosa has repaired or replaced hundreds of blades for several wind power plants in china. At the same time, Aerosa has accumulated a lot of practice experience. Now Aerosa can repair or replace all kinds of blades in time. It is very reliable and economic.
WT-152
blades made by Aerosa have excellent high efficient,anticorrosion,high intension.
wind turbine blade
WT-152
blades made by Aerosa have excellent high efficient,anticorrosion,high intension.
and high quality with reasonable price.
the technical paremeters of WT-152
Rotor Diameter: 15.2m
Generator Rated Power: 55/100kw
Number of Blade:3
Rated wind speed: 12/14m/s
Start wind speed: 4 m/s
Max wind speed: 70 m/s
1. Blades
Aerosa can provide the whole sets of blades, whose length from 1 meters to 29 meters, rated output from 300w to 1200Kw.
Furthermore, according to the requirement of customers, Aerosa can design and manufacture the blades with different power and in different wind conditions.
2. Blades Repairing, Replacing and Maintenance
After mastered blades repair and replace technology, Aerosa has repaired or replaced hundreds of blades for several wind power plants in china. At the same time, Aerosa has accumulated a lot of practice experience. Now Aerosa can repair or replace all kinds of blades in time. It is very reliable and economic.
turbine blade
WT-191
blade made by Aerosa ,have excellent high efficient,anticorrosion,high intension.
high quality with reasonable price.
Blades Of Wind Turbine
Wind turbine blades are Aerosa Composites CO., Ltd.’ dominant products. Aerosa has imported the advanced technical and key equipment from Denmark, combined with Aerosa’s skilled manufacture technology and superiority in aerodynamics and adopted integrated software design and the best advanced process of VARTM.
Along with know-how in advanced composites, we always dedicated in designing and manufacturing rotor blades and nacelles of wind turbines. Aerosa can finish the whole blades manufacture system including design, aerodynamics, mould engineer,structure, material, process, experiment, and test. In manufacture processes, Aerosa performs the imported process standard and ISO9000 standard to ensure the excellent quality.
Blade adopts the advanced airfoil such as DU,NACA63,FFA-Wx-xxx,S8xx in the world. They have more advantages: lift coefficient can reach 1.6, the ratio of lift/drag can reach over 100, it is very large, the range of attack angle is also very large.
All of the products designed by the advanced airfoil theory are manufactured by composites (FRP or GRP), so they have excellent high efficient, anticorrosion, high intension.
Our faith is providing high-quality products at a low cost, to enhance the value of our clients' products. We have set up long-term steady cooperative relationship with many enterprises who producing whole wind turbine system.
Products and Service
1. Blades
Aerosa can provide the whole sets of blades, whose length from 1 meters to 29 meters, rated output from 300w to 1200Kw.
Furthermore, according to the requirement of customers, Aerosa can design and manufacture the blades with different power and in different wind conditions.
2. Blades Repairing, Replacing and Maintenance
After mastered blades repair and replace technology, Aerosa has repaired or replaced hundreds of blades for several wind power plants in china. At the same time, Aerosa has accumulated a lot of practice experience. Now Aerosa can repair or replace all kinds of blades in time. It is very reliable and economic.
blade made by Aerosa ,have excellent high efficient,anticorrosion,high intension.
high quality with reasonable price.
Blades Of Wind Turbine
Wind turbine blades are Aerosa Composites CO., Ltd.’ dominant products. Aerosa has imported the advanced technical and key equipment from Denmark, combined with Aerosa’s skilled manufacture technology and superiority in aerodynamics and adopted integrated software design and the best advanced process of VARTM.
Along with know-how in advanced composites, we always dedicated in designing and manufacturing rotor blades and nacelles of wind turbines. Aerosa can finish the whole blades manufacture system including design, aerodynamics, mould engineer,structure, material, process, experiment, and test. In manufacture processes, Aerosa performs the imported process standard and ISO9000 standard to ensure the excellent quality.
Blade adopts the advanced airfoil such as DU,NACA63,FFA-Wx-xxx,S8xx in the world. They have more advantages: lift coefficient can reach 1.6, the ratio of lift/drag can reach over 100, it is very large, the range of attack angle is also very large.
All of the products designed by the advanced airfoil theory are manufactured by composites (FRP or GRP), so they have excellent high efficient, anticorrosion, high intension.
Our faith is providing high-quality products at a low cost, to enhance the value of our clients' products. We have set up long-term steady cooperative relationship with many enterprises who producing whole wind turbine system.
Products and Service
1. Blades
Aerosa can provide the whole sets of blades, whose length from 1 meters to 29 meters, rated output from 300w to 1200Kw.
Furthermore, according to the requirement of customers, Aerosa can design and manufacture the blades with different power and in different wind conditions.
2. Blades Repairing, Replacing and Maintenance
After mastered blades repair and replace technology, Aerosa has repaired or replaced hundreds of blades for several wind power plants in china. At the same time, Aerosa has accumulated a lot of practice experience. Now Aerosa can repair or replace all kinds of blades in time. It is very reliable and economic.
Subscribe to:
Posts (Atom)