Energy Related Products: 2011-01-23

Saturday, January 29, 2011

wind turbine

wind turbine
CE ROHS ISO9001 certificate
Model:
Z-100
Rated power:100W
Rated DC voltage:12V/24V
Starting wind speed: 3m/s
Cut-in wind speed: 3.5m/s
Rated wind speed: 12m/s
Over-speed protection: Electromagnetic torque control
Engin: Permanent magnetism synchronization generator
Rated rotating speed: 750r/m
Wind energy utilization rate: 0.41
Colour: various
N.W.: 2.8kg
Blade material: Extra-stronger and tenacious engineering plastics
Rotor diameter: 920mm
Packing material: Carton box and foam material and wooden

wind turbine

48v 40ah lifepo4 electric golf car battery packs

1.high quality, fast charging
2.battery got CE certification
3.without memory effects over 2000cycles
4.environment friendly
Battery model
48V40AH
Nominal voltage
48V
Battery capacity
40AH
Operating current
40A
Charge voltage
57V
Size
L385*w205*H165mm
Weight
About 25kg

Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers’requirement, for further information please feel free to contact us.

wind turbine

WIND TURBINE BLADE MADE BY AEROSA HAVE EXCELLENT HIGH EFFICIENT,ANTICORROSION,HIGH INTENSION,REASONABLE PRICE WITH HIGH QUALITY.
Wind Turbine BLADE
Wind turbine blades are Aerosa Composites CO., Ltd.’ dominant products. Aerosa has imported the advanced technical and key equipment from Denmark, combined with Aerosa’s skilled manufacture technology and superiority in aerodynamics and adopted integrated software design and the best advanced process of VARTM.
Along with know-how in advanced composites, we always dedicated in designing and manufacturing rotor blades and nacelles of wind turbines. Aerosa can finish the whole blades manufacture system including design, aerodynamics, mould engineer,structure, material, process, experiment, and test. In manufacture processes, Aerosa performs the imported process standard and ISO9000 standard to ensure the excellent quality.
Blade adopts the advanced airfoil such as DU,NACA63,FFA-Wx-xxx,S8xx in the world. They have more advantages: lift coefficient can reach 1.6, the ratio of lift/drag can reach over 100, it is very large, the range of attack angle is also very large.
All of the products designed by the advanced airfoil theory are manufactured by composites (FRP or GRP), so they have excellent high efficient, anticorrosion, high intension.
Our faith is providing high-quality products at a low cost, to enhance the value of our clients' products. We have set up long-term steady cooperative relationship with many enterprises who producing whole wind turbine system.
Products and Service

1. Blades
Aerosa can provide the whole sets of blades, whose length from 1 meters to 29 meters, rated output from 300w to 1200Kw.
Furthermore, according to the requirement of customers, Aerosa can design and manufacture the blades with different power and in different wind conditions.
2. Blades Repairing, Replacing and Maintenance
After mastered blades repair and replace technology, Aerosa has repaired or replaced hundreds of blades for several wind power plants in china. At the same time, Aerosa has accumulated a lot of practice experience. Now Aerosa can repair or replace all kinds of blades in time. It is very reliable and economic.

wind turbine

wind turbine
CE certificate,ISO90012000
Lifelong 20 years
generator style: 3-phase PM
blade material: fiber glass reinforced
Wind turbine has high efficiency, credible performance, low noise, environment protecting and now are widely used in many countries.
We are manufacturer of wind turbine (wind generator, wind power, wind power generator, wind driven generator) from China. We can produce horizontal-axis wind turbine from 200w-100kw.
We guarantee our quality is frist-class and the best service. Our products have been exported to more than 100 countries and areas, and have won good reputations. At the same products line, our price is the lowest at same quality.
The advantage of our products are high efficiency, convenient maintenance and high reliability. So that it is widely used for home, business and other places, supplying stable electricity to lights, color TVs and other electrical appliances.

wind turbine features:
1) Model: FD2.0-200W,FD2.0-300W, FD2.8-600W, FD3.0-1KW, FD4.0-2KW, FD5.0-3KW, FD6.0-5KW, FD8.0-10KW,FD11-20KW, FD12.5.0-30KW, FD18.0-50KW,FD21.0-100KW

2) Output rated voltage:
DC: 28V, 56V,115V, 220V,230V, 380v

3) Suggest battery voltage:
DC: 24V, 48V, 96V, 192V, 220V, 360V

4)Start wind speed: 3m/s

5) Services
a) ISO9001 quality control and inspection
b) CE Certificate
c) long service life maintainance
d) 3 year warranty for generator

wind turbo ventilator

Superior anti-corrosion, weather resistance, wearability, long service life, light weight and high sensitivity, venting efficien
Model:
300
Material:
fluorine carbon polyester aluminum alloy
Merit:
Light weight, high revolving sensitivity, strong corrosion resistance, high air venting efficiency, clean and smooth, uniform color, and easy maintenance.
Working Condition:
Temperature difference between indoor and outdoor is 0.45 C. It begins to revolve at the wind speed of 0.12m/ s.
Application:
Applied in different roofing between the scope of 0-22.5 oblique angle.
Warranty:
15 years
Task:
used on the roof of acid-washing workshop, coking factory, Lampblack workshop, plating workshop, electric welding workshop, electroplating workshop ,chemical plant, generating station and converting station to exhaust the dirty and unhealthy air and bring you the clean and fresh air.

To save your money, choosing TR Sky axis Fluocarbon Polyster Coating Aluminium Alloy ventilator is a bright idea

The coating layer of fluorine carbon polyester has good performance of anti-air ageing, being able to bear cold and hot, anti mechanical scar, surface self-lubricating. It has strong adhesion and anti chemical corrosion after being solidified. For all the above, it can provide the protection of metal surface as long as 15 years.
Shanghai TR Steel Building Products Co.,Ltd.is the first company to use
Fluocarbon Polyster Coating Aluminium Alloy to produce wind driven ventilators. Fluocarbon Polyster Coating Aluminium Alloy Is a new material applied in industry and aviation, which bears the chemical property, the resistance to acid, alkali.
Structure picture of fluocarbon polyester coating

wind-solar hybrid system

wind turbine
Direct drive permanent magnet VAWT, 3 phase AC

wind-solar hybrid system

wind turbine: 500w vertical axis wind turbine

solar panel:2*90w

battery:2*100ah

windmill generator

windmill generator 20kw
permanent magnetic generator
three-phase
CE Certificate and ISO9001 2000
Life long: 20 years
Dalian Jinlei Heavy Industry Co., Ltd. specialized in researching and developing, manufacturing small wind turbines, wind- solar hybrid generators and solar generators. Our products have a great verity and reliable quality, which have passed the ISO9001 2000 and CE.
Our company has advanced equipment and manufacture process, complete quality management system and excellent technical team to provide high quality and environmental protection products and improved power supply solution and first-class after-sales service for customers.

The magnet steel uses Rb, Fe, P, RE, permanent magnet inlayed, use seccotine to cement and fasten. The stator uses hard cold-rolled silicon iron with high quality which is not easy to be out of shape. The coil uses round cooper enamel covered wire which have treated by vacuum constant temperature hot dip costing to raise the grade of insulation.
According to internationaled and standardized Magnetic Path Designing, optimal utimate disposition to gain the wind speed area of generate electric efficiently, raise efficiency and lower the starting twisting moment of the generator.
According to the aerodynamics, the special design of tail vane can combine the function of adjusting the direction to face wind with adjusting the rotation speed of blades and also the protection of strong wind.
The products with beautiful appearance, small vollum, light weight and are easy for installation.
Our products not only used by aquaculture in domestic costal area and crop farming in the mountain area and environmental project, but also exported to more than 100 countries in Europe, Africa and Asia.

Picture as follows:
generator

Blades

weel hub and press board

tower

dogvane

anemoscope

windmill power generator

windmill power generator
1.High efficiency,long service life
2.Tiny friction,no noise
3.Lighter,smaller,easier
4.CE,ROHS,IEC
windmill power generator
wind generator specifications:
Color
White
Windmill Diameter
3m
Blade Material
FRP
Net Weight
63 KGS
Gross Weight
73 KGS
Package Dimension
154*61*28cm

Wind Generator Technical Parameters:
Rated Output Power
2000W
Rated Wind Speed
9m/s
Startup Wind Speed
2.5m/s
Cut-in Wind Speed
3m/s
Safety Wind Speed
50m/s
Rated Output Voltage
48V/110V
Rated Rotary
600r/m
Generator Type
Brushless NdFeB Permanent-Magnet Generator
Overspeed Protection
Electromagnetic Torque Control
Furling Type
Mechanical
Advantages of Anern Wind Turbine
1.Easy installation, free maintenance
2.Longer service life to 25 years, warranty 5 years
3.Smaller vibration and tiny friction
4.Lighter in weight and smaller in size
5.More stable rotation in higher wind speed

Update Date:2011-10-25 19:18:48

wireless electricity monitors (HA102 )

HA102 wireless electricity monitors
1.Display power/money consumption
2.CE,RoHS,FCC approved power monitor
3.OEM/ODM provide
HA102 wireless electricity monitors
The energy monitor is helping to change the energy usage habits of households and help family to save energy, money and do something for environment protection.

[Brand Story
]
MIEO Wireless Energy Monitor HA102
MIEO is an international brand which always holds the concept of cherishing environment, healthcare, and the transmission of happiness. It keeps pace with people's lifestyle and quality of life, provides health and happy electronic products.

[Product Feature]
·
Display real-time cost/GHG emission/power consumption
·View the data of past7hours,7days, 7 weeks and 24 months
·Historical graphical chart of electricity consumption
·Time and calendar function
·An audible alarmfor excessive electricity consumption
·Valid for single and dual traiff
·Single, two-phase or three-phase system compatible
·433MHz transmission range exceeds 30 meters

wireless electricity monitors (HA102)

wireless electricity monitors
1.Display power/money consumption
2.CE,RoHS,FCC approved electricity monitors
3.OEM/ODM welcome
HA102 wireless electricity monitors
The energy monitor is helping to change the energy usage habits of households and help family to save energy, money and do something for environment protection.

[Brand Story
]
MIEO Wireless Energy Monitor HA102
MIEO is an international brand which always holds the concept of cherishing environment, healthcare, and the transmission of happiness. It keeps pace with people's lifestyle and quality of life, provides health and happy electronic products.

[Product Feature]
·
Display real-time cost/GHG emission/power consumption
·View the data of past7hours,7days, 7 weeks and 24 months
·Historical graphical chart of electricity consumption
·Time and calendar function
·An audible alarmfor excessive electricity consumption
·Valid for single and dual traiff
·Single, two-phase or three-phase system compatible
·433MHz transmission range exceeds 30 meters

wireless power meter (HA102 )

HA102 power meter
1.Display power/money consumption
2.CE,RoHS,FCC approved power meter
3.OEM&ODM welcome
HA102 power meter
The energy monitor is helping to change the energy usage habits of households and help family to save energy, money and do something for environment protection.

[Brand Story
]
MIEO Wireless Energy Monitor HA102
MIEO is an international brand which always holds the concept of cherishing environment, healthcare, and the transmission of happiness. It keeps pace with people's lifestyle and quality of life, provides health and happy electronic products.

[Product Feature]
·
Display real-time cost/GHG emission/power consumption
·View the data of past7hours,7days, 7 weeks and 24 months
·Historical graphical chart of electricity consumption
·Time and calendar function
·An audible alarmfor excessive electricity consumption
·Valid for single and dual traiff
·Single, two-phase or three-phase system compatible
·433MHz transmission range exceeds 30 meters

wise choice of Biocoal Forming Machine for Biomass Briquettes at best price

Biocoal Forming Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:

1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials

Working Principle of Sawdust Briquette Machine:

Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:

1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:

1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.

Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood

Biomass briquette machine:

48v 40ah lifepo4 electric golf car battery packs

wise choice of Biocoal Forming Machine for Biomass Briquettes

wise choice of briquette machine

wise choice wood dust Briquette making machine - Charcoal briquette high quality

wood briquette machine(capacity: 800-1000kg/h)

As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team to
Our advantages
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc. We have already got CE certificates for all of our equipments.

wood briquette machine

wood briquette machine
1.CE certificate
2.Briquette diameter:4-30mm
3.Raw materails: biomass agriculture waste or coal powder
wood briquette machine

1.Our wood briquette machine (Patent NO:200720157337.9 ) with CE certificate adopted the techonology from Germany( KAHL )13 years ago. And our patent--Taper Shape Rollers reduce the friction between flat die and rollers, so the lifetime of the die and rollers lengthened a lot. It is your best choice to press biomass pellet/briquette, such as wood pellet, straw pellet, rice husk pellet and so on.

2. For SKJ3- Series wood briquette machine, we have the oil pump matched with the machine, which can lubricate the rollers automatically when they are working.

3. Because of the high pressure and stable operation, our wood briquette machine (flat die pellet mill) can make good density pellets without bond. The materials that can be used for making briquettes by woodbriquette machine are as follows:

Coarse fiber: wood sawdust, corn stalk, rice husk, cotton stalk, weeds, crop straw, paper, plastic, cocopeat, bran, home wastage, factory reject and so on.
Our briquette machine can also make feed from corn, soybean, and so on. Also can be used for making biological fertilizer, organic fertilizer etc.

4. The following specifications about the capacity is for wood pellet/briquette, if the machines are used for making feed pellets or fertilizer pellets, the capacity will be doubled or three times.

Model
Output(kg/h)
Power (kw)
Diameter of pellet (mm)
Weight(t)
Size(mm)
Note
SKJ2-200
100-160
11
Φ4-6
0.28
1300×500×850
Diesel engine and motor dual-use

SKJ2-250
160-260
15
Φ4-6
0.5
1400×600×1000
SKJ2-300
300-500
30
Φ4-8
0.76
1860×670×1600
SKJ3-350A
400-600
37
Φ4.5-10
2.2
1900×850×1700
Gear rotation
Auto-Lubrication systerm
SKJ3-450A
500-800
55
Φ4.5-10
4.3
2300×1100×1900
SKJ3-550A
1000-1500
90
Φ4.5-12
5.5
2350×1000×2050
SKJ3-800
1500-2500
130-160
Φ4.5-12
6.8
3200×1235×2700
SKJ4-1200
3000-5000
280-320
Φ4.5-15
19
3800×1700×4200
SKJ300B
100-200
11
Briquette diamete: Φ6-25
Press size:
20×30
0.8
1170×420×850

SKJ3-350B
200-500
30
2
1500×1600×1750
Auto-Lubrication systerm
SKJ3-450B
400-700
45
3.5
1980×900×1700
SKJ3-550B
600-1000
75
2.8
1575×2300×1950

If you are interested in our briquette machines, please do not hesitate to contact us!

Best regards
Wendy wang

MP.: 0086-18678866202
Fax: 0086-531-83483378

wood briquette machine

wood briquette machine
1.CE Certification
2.Hot sale in Europe
3.High quality
Wood briquette machine
Sawdust Briquette Machine can make stick shape wood briquette of different diameter and different shape from agro-forest wasted
Prospect of Briquette Machine:
Due to the rapid increase in the need of energy source, more people start to become interested in Biomass Briquette business. Biomass Briquette are Renewable, Eco-friendly Energy especially for agricultural countries.

Biomass Briquette investment is a best project to generate revenue from agro-forestry waste and to produce Green Energy to protect the global environment. The awareness of using Eco-friendly & Non-conventional Bio-coal / Bio-fuel is increasing day-to-day due to the increasing of the conventional fuel cost

This plant can make stick shape wood briquette of different diameter and different shape from biomass and agro-forest waste.

Raw Material to make Biomass Briquette Machine:
Any type of Agro-Forestry waste can be used. But the Moisture Content Should be Less than 12%, grain size is below 5×5mm.

Groundnut-shell Sugarcane residue Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Rice Husks Forestry wastes Wood Chips and many other Agro wastes.

Biomass Briquette Machine:
This Biomass Briquette Screw Press equipped with automatic temperature control system are designed to produce high density wood briquette from biomass. The motor can be 11kw/15kw/18.5kw-3phase-380v-50hz electrical driven motor. This machine can be operated 16 hours per day. The extruded wood briquette can be used as fuel for briquette boilers or boilers for heating. Please note: during briquetting process, there will be some smoke from the briquette machine that have to be expel to atmosphere.

wood briquette machine

wood briquette machine
1. Taper roller
2. CE certificate
3. Automatic lubrication system
4.4-30mm briquette
wood pellet press

1. Our wood briquette machine (Patent NO:200720157337.9 ) with CE certificate adopted the techonology from Germany( KAHL )13 years ago. And our patent--Taper Shape Rollers reduce the friction between flat die and rollers, so the lifetime of the die and rollers lengthened a lot. It is your best choice to press biomass pellet, such as wood pellet, straw pellet, rice husk pellet and so on.

2. For SKJ3- Series wood briquette machine, we have the oil pump matched with the machine, which can lubricate the rollers automatically when they are working.

3. Because of the high pressure and stable operation, our wood pellet machine (flat die pellet mill) can make good density pellets without bond. The materials that can be used for making pellets by wood briquette machine are as follows:
Coarse fiber: wood sawdust, corn stalk, rice husk, cotton stalk, weeds, crop straw, paper, plastic, cocopeat, bran, home wastage, factory reject and so on.
Our briquette machine can also make feed from corn, soybean, and so on. Also can be used for making biological fertilizer, organic fertilizer etc.

4. The following specifications about the capacity is for wood pellet, if the machines are used for making feed pellets or fertilizer pellets, the capacity will be doubled or three times.

Model
Output(kg/h)
Power (kw)
Diameter of pellet (mm)
Weight(t)
Size(mm)
Note
SKJ2-200
100-160
11
Φ4-6
0.28
1300×500×850
Diesel engine and motor dual-use

SKJ2-250
160-260
15
Φ4-6
0.5
1400×600×1000
SKJ2-300
300-500
30
Φ4-8
0.76
1860×670×1600
SKJ3-350A
400-600
37
Φ4.5-10
2.2
1900×850×1700
Gear rotation
Auto-Lubrication systerm
SKJ3-450A
500-800
55
Φ4.5-10
4.3
2300×1100×1900
SKJ3-550A
1000-1500
90
Φ4.5-12
5.5
2350×1000×2050
SKJ3-800
1500-2500
130-160
Φ4.5-12
6.8
3200×1235×2700
SKJ4-1200
3000-5000
280-320
Φ4.5-15
19
3800×1700×4200
SKJ300B
100-200
11
Briquette diamete: Φ6-25
Press size:
20×30
0.8
1170×420×850

SKJ3-350B
200-500
30
2
1500×1600×1750
Auto-Lubrication systerm
SKJ3-450B
400-700
45
3.5
1980×900×1700
SKJ3-550B
600-1000
75
2.8
1575×2300×1950

If you are interested in our briquette machines, please do not hesitate to contact us!

Best regards
Wendy wang
Tel: 0086-531-83483996
MP.: 0086-18678866202
Fax: 0086-531-83483378

wood briquette, briquette press, briquette machine

Lower power consumption
Continue working above 16hours per day
Really easy to use

Model
Power
Output(t/h)
Size(m)
Weight(t)
9HY-YK-1200
30kw
1.2
6.5*1*2.5
1.8
9HY-YK-1600
37kw
1.6
6.5*1*2.5
2.2
9HY-YK-2000
45kw
2.0
7.5*1.2*2.5
2.9
9HY-YK-3000
55kw
3.0
10.5*3.5*3.2
4.0

G
UARANTEE
The guarantee period shall be twelve (12) months from the date of shipment acceptance test in the Seller's factory.

A
FTER
SALES
Where the Buyer requires the Seller to send engineer(s) to service the Commodity in the Buyer's factory expenses for round-trip air ticket, accommodation and allowance, and costs of an interpreter, transportation and personal insurance for the engineer(s) shall be borne by the Buyer.
P
AYMENT
50% of total contract value shall be paid by the Buyer to the Seller as down payment by telegraphic transfer within one week after signing the Contract.
50% of total contract value shall be paid by the Buyer to the Seller by telegraphic transfer upon receiving scanned Bill of Lading from Seller.

wood carbonization furnace

This carbonization furnace is a necessary euipment to process the half-finished briquettes into high quality charcoal.
Induction:

This carbonization furnace is specially used for the quick carbonization of the branches, raw wood, half-finished briquettes into high quality charcoal.

The process:
Put the tree branches, the raw wood, the briquettes into the carbonization furnace, you need to ignate the carbonized materials, then the materials can burn themselves in the stoves, after some fixed time, you can get high quality charcoal.

Technical parameter:
5m3 Carbonization furnace
MODE:THL-5
POWER(kw):5kw
OUTPUT:1T/day
DIMENSION(m):3.0x2.0x2.2
GW/NW:6500/6000 KG

48v 40ah lifepo4 electric golf car battery packs

wood dust charcoal briquette machine

wood dust cleaner

1. wood duster with wet and dry cleaning function
2. with synchronous operation
Features
◊
wood duster with wet and dry cleaning function
◊
with synchronous operation
◊

with black color

◊

airflow:58L/S
◊
with 4.5m power cord
◊
G.M.:8.5 KGS
◊
N.M.:7.5 KGS

Power
◊
voltage:100-240V/50-60HZ
◊
motor power:1250-1400W P-type motor
◊
Max outlet power: 2000W

Basic Accessories
◊
1 pc Hose(1.5 meter)
◊
2 pcs Plastic Tubes (length:43cm)
◊
1 pc Wetbrush
◊
1 pc Sponge Filter
◊
4 pcs Wheels
◊
1 pc Paper Dustbag
◊
1 pc Crevice Nozzel
◊
1 pc Color Box (3 colors)
◊
1 pc Sofa Brush

CE/GS/ETL/ROHS APPROVAL

wood granulator

wood granulator, wood granulator machine.wood pellet mill ,wood granulator equipment
wood granulator
wood granulator is a new patent of pellet mill special for wood sawdust. But wood granulator can also apply to the stalk, straw, and son on. It is adopted the technology from Germany. The output volume of wood granulator is high, energy consumption is low and the operation is convenient.
A) The materials are pressed by the 3 rollers at one time, so the pressed area increases 1 more roller, so the output is improved.
B) The three rollers of wood granulator are designed fan-shaped and slanted to reduce the friction between the roller and the plate. Therefore the consumption is lower.
Model
SKJ 3-550
SKJ 3-800
SKJ 3-1000
Power(KW)
45
75
132
Output( /H)
0.8-1T
1.5-2T
2-3T

Friday, January 28, 2011

wood granulator

wood graulator.wood pellet machine.wood pellet mill.wood granulating machine.pellet mill
wood granulator
wood granulator is a new patent of pellet mill special for wood sawdust. But wood granulator can also apply to the stalk, straw, and son on. wood garanulator is adopted the technology from Germany. The output volume is high, energy consumption is low and the operation is convenient.
A) The materials are pressed by the 3 rollers at one time, so the pressed area of wood granulator increases 1 more roller, so the output is improved.
B) The three rollers of wood granulator are designed fan-shaped and slanted to reduce the friction between the roller and the plate. Therefore the consumption is lower.
Model
SKJ 3-550
SKJ 3-800
SKJ 3-1000
Power(KW)
45
75
132
Output( /H)
0.8-1T
1.5-2T
2-3T

wood hammer mill

wood hammer mill
1. hammer mill with CE
2. Hammer mill can crush wood chips, straw, grass, stalk, tree branches to 2-5mm.
wood hammer mill

1. Our hammer mill is the most ideal milling equipment of all kinds of wood piece, straw, grass, stalk, tree branches, waste cardboard, bamboo, wood scraps, corn stalk, peanut shell, wheat stalk, wood fuel, cotton stalk, biomass shell and so on.

2. It works with Cyclone, fan blower and Air-lock to collect dust.

3. The raw materials can be crushed into particles, whose diameter is 2-5 mm.

4.This kind of hammer mill is widely used in foddor factory, Swine farm, wood factory, etc.

5. CE certificate
hammer mill Technical Parameter:

Model
Capacity (T/H)
Power (KW)
Weight(T)
Size(mm)
Hammer pieces
SG40
0.2-0.5
7.5
0.27
1310*800*1070
12
SG50
0.6-0.8
15
0.45
1380*800*1010
16
SG60*27
0.8-1.5
22
1.1
1900*800*1100
24
SG65*55
1-3
37
1.5
2100*1700*1500
48
SG65*75
2-2.5
55
1.9
2100*1000*1100
72
SG130*55
4-6
110
5.3
2800*1620*2100
80
SG130*100
6-8
160
6.8
3020*1620*2170
160

If you are interested in our hammer mill, please do not hesiate to contact us.

Best regards,
Wendy
Tel: 0086-531-8348 3996
Fax: 0086-531-8348 3378
Mob: 0086-18678866202

wood log carbonization furnace

wood logs carboning machine

wood logs carboning machine
Good quality charcoal after carboning
the degree: reach to 480
final products: charcoal for he
wood logs carboning machine

Good quality charcoal after carboning
the degree: reach to 480degree
final products: charcoal for heating

We have different types of the carbonization furnace, round and square.
It is good use for carboning the wood logs, or wood briquettes

wood logs carbonization stove new model

wood logs carbonization stove
Good quality charcoal after carboning
the degree: reach to 480
final products: charcoal for he
wood logs carbonization stove

Good quality charcoal after carboning
the degree: reach to 480degree
final products: charcoal for heating

We have different types of the carbonization furnace, round and square.
It is good use for carboning the wood logs, or wood briquettes

wood pellet burner

1.Energy-saving Biomass burner
2.cheap price coal burner
3.pellet boiler burner
0086-15238020676
1.Energy-saving Biomass burner
2.cheap price coal burner
3.pellet boiler burner
0086-15238020676

Product introduction:
Biomass burner is multi-functional types of biomass pyrolysis for the high-quality heat, replace coal, electricity, gas boiler auxiliary equipment and hot air drying equipment. Matching it with various types of boilers have half a ton, a ton, two tons, three tons, four tons ...... and other models.

Product introduction:
Biomass burner is multi-functional types of biomass pyrolysis for the high-quality heat, replace coal, electricity, gas boiler auxiliary equipment and hot air drying equipment. Matching it with various types of boilers have half a ton, a ton, two tons, three tons, four tons ...... and other models.

wood pellet machine with CE

wood pellet machine
1)Taper roller is our patent
2)CE certificate
3)wood pellets: 2-12mm in diameter
4)automatic lubrication
wood pellet machine

(1)
wood pellet machine
can make wood pellets from sawdust, wood shavings, wood chips or wood logs, any wood wastes or biomass. The moisture content of raw materail should be 15%-20% when put into
wood pellet machine,
if it is more than 20%, a Dryer is necessary.
(2) As we know, the original design of flat die pellet presses are used for processing feedstuff. But through our client's feedback and diligent research,
wood pellet machine
is applied in processing wood sawdust, straw, different kinds of stalks, grass, etc. The small wood pellet machine has the advantages of low price, low consumption, high capacity, etc.It is a good choice for small farm family. And this
wood pellet machine
is one kind of energy source machines which can process wood sawdust, wood lump, etc agro-waste resource.

(3)
wood pellet machine
with taper roller, that is, falt die pellet mill SKJ3- series, is our patent with CE. This kinds of
wood pellet machine
has automatic lubrication systerm.

(4)
wood pellet machine
’s technical parameter.

Model
Output(kg/h)
Power(kw)
finished products (mm)
Weight(t)
Size (mm)
Note
SKJ2-200
100-160
11
2-15
0.28
1150×380×800
Diesel engine and motor dual-use

SKJ2-250
160-260
15
0.58
1260×600×800
SKJ2-300
300-500
30
0.79
1550×650×1000
SKJ3-350
400-600
37
3.4
1800×850×1500
Gear rotation
SKJ3-450
500-800
55
4
2300×1100×1600
SKJ3-550A
1000-2000
90
5
2600×1100×2100
SKJ3-800
2000-3000
130-160
7.6
2700×1200×2400
SKJ4-1200
3000-4000
280-320
16.5
3700×1900×3000

(5) Payment term : T/T or L/C at sight

(6) Delivery time: within 20 working days.

If you have any questions about our
wood pellet machine
, please let me know and I will reply you as soon as possible.

Yours sincerely,
Wendy (Miss wang)
Mobile: 00 86 152 5412 3292
Tel: 00 86 531 83483996
Fax: 00 86 531 8348 3378

48v 40ah lifepo4 electric golf car battery packs

wood pellet machine

wood pellet machine is a multifunational one, it can produce pellet briquette with diameter from 6-30mm with big output.
Wood pellet machine introduction:

Wood pellet machine is a new patent of pellet mill special for wood sawdust. But it can also apply to the stalk, straw, and son on. It is adopted the technology from Europe. The output volume is high, energy consumption is low and the operation is convenient.

A) The materials are pressed by the 3 rollers at one time, so the pressed area increases 1 more roller, so the output is improved.

B) The three rollers are designed fan-shaped and slanted to reduce the friction between the roller and the plate. Therefore the consumption is lower.

Model
Output
(kg/h)
Power
(kw)
Finished product
(mm)
Weight(t)
Size(mm)
SKJ2-200
100-160
11

2-15
0.18
1150×380×800
SKJ2-250
160-260
15
0.48
1260×600×800
SKJ2-300
300-500
30
0.79
1550×650×1000
SKJ3-350
400-600
37
1.6
1800×850×1500
SKJ3-450
500-800
55
2.3
2300×1100×1600
SKJ3-550A
1000-2000
90
3.2
2600×1100×2100
SKJ200B
100-300
11
Briquette diameter:6-25
Press size:
20×30
0.13
1170×420×850
SKJ3-350B
200-500
30
2
1850×600×1650
SKJ3-450B
400-700
37
3
1850×900×1200
SKJ3-550B
600-1000
55
2.8
2600×1100×1850
SKJ3-800
2000-3000
130-160
7.6
2700×1200×2400
SKJ4-1200
3000-4000
280-320
16.5
3700×1900×3000

It is my great honor to serve you. Looking forward to hear from you.

Yours sincerely,
Wendy

Mobile phone:86-15254123292
Tel: 86-0531-38483996
Fax: 86 531 83483378

wood pellet making plant

wood pellet machine can press pellets with wood waste as biomass energy used in boiler of power plant, fireplace in family.
wood pellet machine

We are a professional manufacture of wood pellets/briquette making line for many years and have exported to many countries, such as Argentina, South Korea and so on.

Generally speaking, wood pellets making line includes Wood Chipper (cut to logs to chips), Dryer (adjust the moisture), Hammer Mill (make the wood chips or branch to sawdust), Pellet Mill (press wood pellets), Cooler (reduce the temperature of pellets from pellet mill), Packing machine and so on, but different raw materials and different requirements from customers will have different flow charts.

This wood pellet making line is installed in Argentina. It is a portable unit. The capacity is 1-1.5T/H.

If you are interested in this portable unit, please contact me and we will designed one great wood pellet making line as per your requirement.

Wendy(Miss wang)
MP: 00 86 152 5412 3292
Fax: 00 86 531 8348 3378

wood pellet mill with CE

wood pellet mill
1) Flat die pellet mill SKJ2-250, 15KW
2) two rollers
3) pellet specification:2-8mm
4) Certificate: CE
Wood pellet mill

(1) technical parameter of wood pellet mill

Model
Specification
Capacity

SKJ2-250
Power: 15KW
Approval: CE
Dimension:1260*600*800mm
Weight:500KG
Pellet diameter:2-8mm
Roller: two
Electric control box
For wood, grass, stalk, paper etc agro/forest waste:
160-260 kg/hour
For soybean, cereal materail ect animal feed:
500-800 T/Hour
For organic fertlizer: 250-400 kg/hour

(2) pictures of wood pellet mill

If you have any questions about this small wood pellet mill, please do not hesitate to tell me. It is my great hornor to serve you.

Waiting for your any information. Thank you.

Yours sincerely,
Wendy
Mobile: 00 86 152 5412 3292
Fax: 00 86 531 83483378

wood pellet mill

wood pellet mill is our patent with CE.It is specially applied to wood sawdust,straw,rice husk and some kinds of crop stalk.
wood pellet mill

The series pellet mill is our patent product.It is specially applied to wood sawdust,straw,rice husk and some kinds of crop stalk and other agricultual waste. .The technology is developed from Gemaney.

A) The materials are pressed by the 3 rollers at one time, so the pressed area increases 1 more roller, so the output is improved.
B) The three rollers are designed fan-shaped and slanted to reduce the friction between the roller and the plate. Therefore the consumption is lower.

Model: SKJ3-450

Pellets capacity: 500-800 kg/h

Power: 55KW

Pellet specification: 4-10mm (pellet diameter)

If you are interested, please contact me

Wendy wang
Mobile: + 00 86 152 5412 3292
Telephone NO: 00 86 531 83483996
Fax: + 00 86 531 8348 3378

wood pellet mill

wood pellet mill is used with motor or diesel engine. The output volume is high, energy consumption is low.
wood pellet mill

Our company has introduced into Gemanic advanced pellet pressing technology.inventing the Taper-shape roller series flat-die pellet mills.they can make pellets(2-15mm),bricks(20mm*30mm),briquettes(20-30mm),which is mainly applicable to crude fiber granulation,such as:sawdust,rice husk,cotton stalk and all kinds of crop straw,home wastage,the worn out plastic and the factory reject,the material of low ashesion rate and difficult to forming,they also can be applied to low temperature pelleting,such as: biological fertilizer,organic fertilizer,compound fertilizer.It is especially confirmed to the world market of renewable compression biomass energy demand.They are our patent products.

Technical Parameter:
Model
Output(kg/h)
Power(kw)
Processing standards(mm)
Weight(t)
Size(mm)
Note

SKJ2-200
100-160
15

2-15
0.18
1150×380×800
Diesel engine and motor dual-use

SKJ2-250
160-260
15-18.5
0.48
1260×600×800
SKJ2-300
300-500
30
0.79
1550×650×1000
SKJ3-350
400-600
37
1.6
1800×850×1500
Gear rotation
SKJ3-450
500-800
55
2.3
2300×1100×1600
SKJ3-550A
1000-2000
90
3.2
2600×1100×2100
SKJ200B
100-300
11
Briquette diameter:6-25
Press size:
20×30
0.13
1170×420×850

SKJ3-350B
200-500
30
2
1850×600×1650
SKJ3-450B
400-700
37
3
1850×900×1200
SKJ3-550B
600-1000
55
2.8
2600×1100×1850
SKJ3-800
2000-3000
130-160
7.6
2700×1200×2400
SKJ4-1200
3000-4000
280-320
16.5
3700×1900×3000

wood pellet plant with CE

wood pellet plant
(1)CE certificate
(2)includes hammer mill, Dryer, pellet mill, Cooler, screener, packing machine and so on
Wood pellet plant

Wood pellet plants are a complete set up to equipment used to produce wood pellets, generally for use as pellet fuel. There are several pieces of equipment used to produce pellets, including wood pellet mills.
(1)Hammer mill

One of the first pieces of equipment in the wood pellet plant is the hammer mill or chipper. Before pellet compression can take place the raw material must be reduced to small uniform size. The particle size required does vary on the diameter of pellet to be produced and the mm diameter hole in the pellet mill due. For example, pellet fuel is usually produced to 6mm pellets, as this diameter of pellet can be used by all pellet stoves. Therefore the particle size produced via the hammer mill, chipper or crusher must be smaller than 6mm. Some pellet boilers can use larger diameter pellets, therefore in these circumstances a large pellet could be produced such as 8mm, therefore the hammer mill must produce particles less than 8mm. These are the minimum requirements for particle size reduction, however there is evidence to support that a smaller particle size of around 3-4mm produces a better quality pellet. The reasons for this is a smaller particle size allows for better heat penetration, to produce a stronger more durable wood pellet fuel.
(2) wood moisture content and Dryer

Before the raw material is ready for the wood pellet mill, a dryer is usually included in the wood pellet plant. Most virgin wood resources have a moisture content of around 50%, and for pellet production that figure needs to be closer to 15%. Therefore after the hammer mill, a flash dryer or rotary dryer is included into the pellet plant. A flash dryer is also known as a air current dryer or pipe dryer. The wet particles are carried in a hot gas stream through a pipe network and buffer cylinders. A cyclone separator is then used to separate the dry particles and wet air. A flash dryer is usually used for raw material which require only around 10-20 moisture removed. For large wood pellet plants rotary dryers are used as they can be controlled.

(3) wood pellet mill
The pellet mill or wood pellet mill is the central piece of equipment in the wood pellet plant. The flat die pellet mill with taper rollers and efficient centrifugal pellet mill are our patent. As stated, before pellet compression in the wood pellet mill can take place, the raw material must have the correct particle size and the correct moisture content. It must also be free from contaminates such as stone or metal, which could damage the pellet mill rollers and die. Any key feature the raw material should have for consistent and efficient quality pellet production, is material constituency its self.

(4)wood pellet stove and pellet burning
Most wood pellet plants are used to produce wood pellet fuel for pellet stoves and boilers. As stated this usually means producing a pellet of 6mm or perhaps 8mm for pellet boilers. Wood pellet plant owners actually prefer producing large diameter pellets, as the cost to produce the pellets is less. A large diameter pellet consumes less power during particle size reduction and pellet compression in the pellet mill.

(5)We are a professional manufacturer of wood pellet plant. We have exported many wood pellet plant to different countries, such as Argentina, South Korea, Inida, Bulgaria and so on. I am sure we can can offer you the best service and guide.

I am looking forward to hear from you.

Yours sincerely,
Wendy (Miss wang)
Mobile: 00 86 152 5412 3292
Tel: 00 86 531 8348 3996
Fax: 00 86 531 8348 3378

wood pellet plant

wood pellet plant
1) CE certificate
2) It may include wood chipper, hammer mill, dryer, pellet mill, cooler and so on.
wood pellet plant instruction

Wood Pellet Plant is the process of making waste materials into solid fuel. The objects are used for burning purposes. Wood Pellet can be made from any type of Agro-Forestry waste: Groundnut-shell Sugarcane Biogases Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Coir Pitch Barks/Straws Rice Husks Forestry wastes Wood Chips and many other Agro wastes.

Wood Pellet Plant may include wood chippers/grass cutter, hammer mills, driers, mixers, pellet mills, coolers, screeners, packing machines and other related machines. Different flow chart should be designed for varied material conditions.

We have installed many whole pellet making lines all over the world.

If you also need the lines, please do not hesitate to contact us.
Best regards,
Wendy
Mobile 00 86 18678866202

Best regards,
Wendy
Mobile: 00 86 18678866202

wood pellet plant

Wood pellet plants are a complete set up to equipment used to produce wood pellets, generally for use as pellet fuel. There are
Wood pellet plant
Wood pellet plants are a complete set up to equipment used to produce wood pellets, generally for use as pellet fuel. There are several pieces of equipment used to produce pellets, including wood pellet mills.
(1)Hammer mill
One of the first pieces of equipment in the wood pellet plant is the hammer mill or chipper. Before pellet compression can take place the raw material must be reduced to small uniform size. The particle size required does vary on the diameter of pellet to be produced and the mm diameter hole in the pellet mill due. For example, pellet fuel is usually produced to 6mm pellets, as this diameter of pellet can be used by all pellet stoves. Therefore the particle size produced via the hammer mill, chipper or crusher must be smaller than 6mm. Some pellet boilers can use larger diameter pellets, therefore in these circumstances a large pellet could be produced such as 8mm, therefore the hammer mill must produce particles less than 8mm. These are the minimum requirements for particle size reduction, however there is evidence to support that a smaller particle size of around 3-4mm produces a better quality pellet. The reasons for this is a smaller particle size allows for better heat penetration, to produce a stronger more durable wood pellet fuel.
(2) wood moisture content and Dryer
Before the raw material is ready for the wood pellet mill, a dryer is usually included in the wood pellet plant. Most virgin wood resources have a moisture content of around 50%, and for pellet production that figure needs to be closer to 15%. Therefore after the hammer mill, a flash dryer or rotary dryer is included into the pellet plant. A flash dryer is also known as a air current dryer or pipe dryer. The wet particles are carried in a hot gas stream through a pipe network and buffer cylinders. A cyclone separator is then used to separate the dry particles and wet air. A flash dryer is usually used for raw material which require only around 10-20 moisture removed. For large wood pellet plants rotary dryers are used as they can be controlled.
(3) wood pellet mill
The pellet mill or wood pellet mill is the central piece of equipment in the wood pellet plant. The flat die pellet mill with taper rollers and efficient centrifugal pellet mill are our patent. As stated, before pellet compression in the wood pellet mill can take place, the raw material must have the correct particle size and the correct moisture content. It must also be free from contaminates such as stone or metal, which could damage the pellet mill rollers and die. Any key feature the raw material should have for consistent and efficient quality pellet production, is material constituency its self.
(4)wood pellet stove and pellet burning
Most wood pellet plants are used to produce wood pellet fuel for pellet stoves and boilers. As stated this usually means producing a pellet of 6mm or perhaps 8mm for pellet boilers. Wood pellet plant owners actually prefer producing large diameter pellets, as the cost to produce the pellets is less. A large diameter pellet consumes less power during particle size reduction and pellet compression in the pellet mill.
(5)We are a professional manufacturer of wood pellet plant. We have exported many wood pellet plant to different countries, such as Argentina, South Korea, Inida, Bulgaria and so on. I am sure we can can offer you the best service and guide.

I am looking forward to hear from you.

Yours sincerely,
Wendy (Miss wang)
Mobile: 00 86 152 5412 3292
Tel: 00 86 531 8348 3996
Fax: 00 86 531 8348 3378

48v 40ah lifepo4 electric golf car battery packs

1.high quality, fast charging
2.got CE certification
3.without memory effects over 2000cycles
4.environment friendly
Battery model
48V40AH
Nominal voltage
48V
Battery capacity
40AH
Operating current
40A
Charge voltage
57V
Size
L385*w205*H165mm
Weight
About 25kg

Operating temperature
-20°C to 60°C
Charge temperature
0°C to 45°C
Storage temperature
-10°C to 45°C
Warrenty
1 year
We can also customized the battery packs as our customers’requirement, for further information please feel free to contact us.

wood pelletizer machine

wood pelletizer machine
1. Taper roller pelletizer machine
2. CE certificate
3. Automatic lubrication system
4.Patent produc
wood pelletizer machine

1. Our wood pelletizer machine (Patent NO:200720157337.9 ) with CE certificate adopted the techonology from Germany( KAHL )13 years ago. And our patent--Taper Shape Rollers reduce the friction between flat die and rollers, so the lifetime of the die and rollers lengthened a lot. It is your best choice to press biomass pellet, such as wood pellet, straw pellet, rice husk pellet and so on.

2. For SKJ3- Series wood pelletizer machine , we have the oil pump matched with the machine, which can lubricate the rollers automatically when they are working.

3. Because of the high pressure and stable operation, our wood pellet machine (flat die pellet mill) can make good density pellets without bond. The materials that can be used for making pellets by wood pelletizer machine are as follows:
Coarse fiber: wood sawdust, corn stalk, rice husk, cotton stalk, weeds, crop straw, paper, plastic, cocopeat, bran, home wastage, factory reject and so on.
Ourpelletizer machine can also make feed from corn, soybean, and so on. Also can be used for making biological fertilizer, organic fertilizer etc.

4. The following specifications about the capacity is for wood pellet, if the machines are used for making feed pellets or fertilizer pellets, the capacity will be doubled or three times.

Model
Output(kg/h)
Power (kw)
Diameter of pellet (mm)
Weight(t)
Size(mm)
Note
SKJ2-200
100-160
11
Φ4-6
0.28
1300×500×850
Diesel engine and motor dual-use

SKJ2-250
160-260
15
Φ4-6
0.5
1400×600×1000
SKJ2-300
300-500
30
Φ4-8
0.76
1860×670×1600
SKJ3-350A
400-600
37
Φ4.5-10
2.2
1900×850×1700
Gear rotation
Auto-Lubrication systerm
SKJ3-450A
500-800
55
Φ4.5-10
4.3
2300×1100×1900
SKJ3-550A
1000-1500
90
Φ4.5-12
5.5
2350×1000×2050
SKJ3-800
1500-2500
130-160
Φ4.5-12
6.8
3200×1235×2700
SKJ4-1200
3000-5000
280-320
Φ4.5-15
19
3800×1700×4200
SKJ300B
100-200
11
Briquette diamete: Φ6-25
Press size:
20×30
0.8
1170×420×850

SKJ3-350B
200-500
30
2
1500×1600×1750
Auto-Lubrication systerm
SKJ3-450B
400-700
45
3.5
1980×900×1700
SKJ3-550B
600-1000
75
2.8
1575×2300×1950

If you are interested in our wood pelletizer, please do not hesitate to contact us!

Best regards
Wendy wang

MP.: 0086-18678866202
Fax: 0086-531-83483378

wood pelletizer

wood pelletizer
(1)pelletizer with CE
(2) Automatic lubrcation system
(3) wood pellet Capacity: 1.2-1.8 T/H
wood pelletizer

XGJ series wood pelletizer is our main product which has adopted the essence of pellet machine in oversea market. The heart part-double layer die has unique structural assembly and “rollers” are made of high wearable alloy materials.

A. wood pelletizer' Seven characteristics
1. Vertical feeding, so that the materials are directly in place.
2. Die is static and roller is rotary; materials are evenly distributed around because of centrifugal force.
3. Double-layer die. Two layers both can be used independently so the machine reduces the cost; What’s more, two layers of the die also can be used at the same time, in this way, the efficiency has been improved greatly.
4. One die with two different apertures. The pellets may have different specifications.
5. Macroporous die; wire joining circular tube; increasing travel; improving density.
6. Ring die and vertical structure are good for cooling the pelletizing room.
7. Independent and frequency conversion discharge device can ensure the rate of pellet formation.

Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0

Φ4-30
XGJ1250
550-660
8.0-12.0

Φ4-30

If you are interested in our wood pelletizer, please do not hesiate to contact me. I will reply you as soon as possible.

Best regards,
Wendy
Mobile: 00 86 18678866202

Fax: 00 86 531 8348 3997

wood pelletizer

sawdust pellet mill make wood pellets with wood waste :sawdust, shaving, branches.The wood pellets can repalce the coal as fuel
sawdust pellet mill

We are a professinoal manufacture of pellet mill. We have three type pellet mills: flat die pellet mill, ring die pellet mill and efficent centrifugal pellet mill among which falt die pellet mill and efficent centrifugal pellet mill are our patent.

Flat die pellet mill is also called wood pelletizer, which can make wood pellets with wood waste such as sawdust, shaving, branches, tree stump and so on.Th e wood pellets can repalce the coal as fuel in boiler of the power plant and furnace in the home.

As the Bioenergy, wood pellets are becoming more and more popular all over the world. The ash of the wood pellets after buring is very good fertlizer.

(1) Model: SKJ3-550A

(2) Pellet capacity: 1-1.5T/H

(3) Power: 90KW

(4) Pellet specification(diameter of pellets): 6mm or 8mm

If you are interested in our sawdust pellet mill, please contact me. I will supply you the best machine and service.
My name is Wendy. I will be happy to know you.

My moblie +00 86 152 5412 3292
TEL: 00 86 531 83483996

Fax: 00 86 531 83483378

wood pellets briquette machine 2T/H

wood pellets briquette machine 2T/H
can make sawdust and all biomass straw into briquettes,
Simple Operation and Convenient

wood pellets briquette machine 2T/H

detail description of wood pellets briquette machine 2T/H

1. High production and little energy consumption
2.the diameter of the finished briquettng is 32mm.

3. the length of the finished products is 55mm.
4. Simple Operation and Convenient Use: only 2-3 people can meet your production.
5.
Function of Electrical Heating: The automatic heating apparatus,
adjusting the humidity of materials, can solve the difficulties of no clogging and
no molding.
technican parameter of wood pellets briquette machine 2T/H
this machine including 4 parts :

1. Straw Briquette Machine
type: DS-2000
size: 2*0.9*1.5m
weight: 1800kg
power: 22kw
capacity : 2 T/H

2. Power Distribution Cabinet
size: 0.6*0.4*1.11m
weight: 20 kg

3. Straw Breaker
type: 96ZP-60
size: 1.9*0.6*2.4m
weight: 900kg
power : 11kw
capacity : 2 T/H

4 Conveyor
type: 6000
size: 8*0.6*0.7m
weight: 500kg
capacity: 2T/H

.

wood powder

My factory produce quality wood powder with 50-325mesh,ash under 15%,moisture under 5%,suitable for making incense stick,WPC etc
Wood powder
Size: 50~325mesh
Material: poplar or hard wood.
Capacity: 500MT per month.
Colour: White or dark colour.
Packing: 30kg/bag ,500kg/bag in bulk packing or as requested.
Quality: Ash content under 15%, moisture under 5%.
Usage: Suitable for making paper, incense stick, WPC products and as filling materials in making some other industrial products etc.

wood shredder

wood shredder is specially applied to round logs, square blocks, wood staff,wood pieces and big chips.
wood shredder

The machines are specially applied to round logs, square blocks, wood staff,wood pieces and big chips.

Operation easily, maintenance simple, life is long and the noisy is low.

They would be the best choices for dealing with wood scraps.

Technical Parameter:
Model
PX15-80
PX45-190
BX216
BX218
Power(kw)
30
45
55
110
Capacity
0.8-1.2t/h
2-4t/h
7-8t/h
12-15t/h
Input Diameter
15cm*15cm
18cm*18cm
23cm*50cm
30cm*68cm
Blade Number
3 flying knives
3 fixed knives
3 flying knives
3 fixed knives
2 flying knives
1 fixed knives
2 flying knives
1 fixed knives
Length of finished chips
10-30mm
10-30mm
30mm
30mm

Contact person: wendy
Phone: 00 86 152 5412 3292
Fax: 00 86 531 8348 3378

wood skateboard(Canadian maple)

1,maple skateboard deck with 100% Canadian maple.
2,cold pressed with USA brand white glue.
3,exactly measuremen

Size: 31"*8", 31"*7.75", 31"*7.5"
Deck: Canadian Maple deck
Deck texture: wood color
Surface: non-slip grip tape
Bottom: OPP printing
Truck and base: 5" heavy-duty color coated aluminum truck and base
Cushion: PU injected
Wheel: PU casting 5031
Bearing: ABEC-7 bearing

wood skateboard(Canadian maple)

Thursday, January 27, 2011

wood working machinery

briquettes making machinery
1.Offer spare parts. one propeller,
one set heating ring and inner sleeve
Easy to use
briquettes making machinery
Working principle:

Briquetting is a process that biomass is compressed under high pressure and high temperature. The self bonding of biomass to form a briquette involves the thermo-plastic flow of the biomass. The lignin content that occurs naturally in biomass is liberated under high pressure and temperature. Lignin serves as the glue in the briquetting process, thus binding,compressing the biomss to form into high density briquettes. During this process, no binder need to be used. So the ouput briquette is a type of clean and green fuel that is ideal for use in furnaces, boilers and open fires. The density of the briquettes is 1100~1300kg/m.

Quality policy
We are committed to offer the premium quality briquetting machines, which conform to the international quality norms. Therefore, we apply stringent quality checking systems and testing procedures. Our Quality Control & Assurance (QC & A) department keep a strict vigil on the entire manufacturing processes right from purchase of raw materials to the shipment of finished goods.

In order to ensure that all the products offer flawless performance, they are tested on well defined quality and performance parameters in our own quality checking laboratory.

48v 40ah lifepo4 electric golf car battery packs

wooden solar oven

can be used indoors
Qingdao Huamao Metal Manufacture Co.,Ltd.

workover rig XJ60(XJ150)

1, The drilling depth: 2600m
2, The maximum hookloas: 585KN
3, The Engine model:F8L413F
4, Transmission: Hydraulic&Machanical
Product model: XJ60(XJ150)
1, The drilling depth: 2600m
2, The maximum hookloas: 585KN
3, The Engine model:F8L413F
4, The Engine Rate: 188kw
4, Transmission: Hydraulic&Machanical

workover rig

lOur company have exported drilling rigs and workover rigs to Indonesia , Russia and other countries .

We are resposible for selling , installing and maintain. All the customers give us good reputation.

item
XJ150
XJ250
XJ350
XJ450
XJ550
XJ650
XJ1000
XJ1200
Min Rig Depth m(ft)
2600(8530)
3200(10500)
4000(13120)
5500(18045)
7000(22966)
8500(27887)
--
--
Max Rig Depth m(ft)
--
2600(8530)
3200(10498)
4500(14064)
5800(19029)
7000(22966)
8000(26247)
9000(29528)
Generator Horsepower kW(hp)
175(235)
224(300)
269(360)
343(460)
429(576)
485(650)
343×2(460×2)
448×2(6000×2)
Drawworks Drums
Single/Double
Single/Double
Single/Double
Single/Double
Single/Double
Single/Double
Single/Double
Single/Double
DrawworksHorse power(hp)
150
250
350
450
550
650
750
1000
Chassis drive type
6×6
6×6
8×8
10×8
10×8
12×8
14×8
14×10
Mast type
Mast single hydraulic
Mast single hydraulic
Mast single hydraulic
Mast single hydraulic Telescoping
Mast single hydraulic Telescoping
Mast single hydraulic Telescoping
Mast single hydraulic Telescoping
Mast single hydraulic Telescoping
m(ft)Mast Height
16(52.8)
18(59)
31.3(102.69)
31.3(102.69)
32(104.99)
34(111.55)
36(118.11)
39.7(130.25)
kN(lb) Max load
585(131580)
689(157360)
1020(229269)
1195(268636)
1350(303480)
1548(347990.4)
1800(404640)
1250(505800)
Drilling Line OD(mm)
22
22
26
26
26
29
Ø29
Ø32