wood chipper
1. wood chipper with CE
2. chipping wood logs to 10-30mm wood pieces
wood chipper
The GX series wood chippers are extremely robust machines with modern design, suitable for the chipping of round logs, waste wood, bamboo, slabs, planks, log end pieces, etc.
the feed-in materials are turned into high quality, uniform, and multi-application wood chips.The chips are suited as fuel for high intensity burning in modern heating plants. With continuous and economical working procedure, low maintenance costs, high efficiency and high capacity, our wood chipper machine had been trusted and praised since they were put on the market.
Drum wood Chipper
Model
Main Power (KW)
Capacity (T)
Max Feeder Size (mm)
Chips size (mm)
Weight (KG)
External Dimensions (mm)
GX215
45
3.0-4.0
160*400
30
2990
1470*1550*970
GX216
55
7.0-8.0
230*500
30
4070
1800*1900*1210
GX218
110
12.0-15.0
300*680
30
7000
2200*2150*1500
GX2113
200-250
15.0-30.0
450*800
38
11840
3670*2517*2050
If you are interested in our pellet machines, please do not hesitate to contact us!
Best regards
Wendy wang
Tel: 0086-531-83483996
MP.: 0086-18678866202
Fax: 0086-531-83483378
Saturday, May 7, 2011
Wood pellet machine
wood pellet machine
1 wood pellet machine with CE
2 wood pellet machine capacity: 1.2-1.5 T/H
3.automatic lubrication systerm
Wood pellet machine introduction:
Wood pellets are clean, carbon dioxide neutral and suitable fuel which is produced mainly by sawdust and waste, pressed under high pressure without gum or other supplements. The wood pellets are of cylindrical shape and normally their diameter is 6-10 mm and their length is 10-30 mm. Due to this fact, the wood pellets are highly standardized and pressed, which allows for reduction of transport costs; they, also, assist the automated operation of heating and power plants, regardless of whether they are in one-family houses or are large power facilities. Due to their rapidly growing share in the market, wood pellets are a considerable resource for the growing utilization of the biomasses in Europe and in other regions. They are, as well, an excellent instrument for local resources utilization, because, in material aspect, they contribute to environmental protection and control of climate changes. European Union has set itself the task of increasing the share of recycled energy sources for heat and electric power generation. Biomass plays a strategic role in the achievement of such tasks, as particularly wood pellets appear to be a key technology with some specific advantages. The wood pellets can be transported more cheaply and more easily, because of their high density, compared to other biomass forms, while, on the other hand, the high degree of standardization provides for exclusively low fuel emissions, even if wood pellets are poorly used. The wood pellets are also a very convenient fuel form for end users – they can be delivered by cistern-trucks or in bags and they are suitable to be used in automatic feeding systems, which makes them convenient for processing and time-saving, same as the systems, operating with gas or liquid fuels.
Our wood pellet machine XGJ with CE certificate (our patent) has the advantages of falt die pellet machine and ring die pellet machine. Our wood pellet machine is your best choice to make wood pellets.The heart part-double layer die has unique structural assembly and “rollers” are made of high wearable alloy materials.
Wood pellet machine Technical Parameter:
Model
Power (KW)
Capacity (T/H)
Weight (T)
Dimension
(mm)
XGJ450
55
0.6-1.0
4.5
2.3*2.09*2.15
XGJ550
75
0.8-1.5
6.04
2.63*1.0*2.40
XGJ560
90
1.2-1.8
6.1
2.6*1.3*2.3
XGJ580
160
1.5-2.5
7
2.9*1.3*2.4
XGJ850
220
2.5-3.5
14.5
3.3*1.4*3.1
XGJ880
315
3.5-5.0
18
3.8*1.68*3.4
Looking forward to cooperating with you.
Best regards,
Wendy (Miss wang)
Tel: 00 86 531 8348 3996
Mobile:00 86 18678866202
Fax: 00 86 531 83483378
1 wood pellet machine with CE
2 wood pellet machine capacity: 1.2-1.5 T/H
3.automatic lubrication systerm
Wood pellet machine introduction:
Wood pellets are clean, carbon dioxide neutral and suitable fuel which is produced mainly by sawdust and waste, pressed under high pressure without gum or other supplements. The wood pellets are of cylindrical shape and normally their diameter is 6-10 mm and their length is 10-30 mm. Due to this fact, the wood pellets are highly standardized and pressed, which allows for reduction of transport costs; they, also, assist the automated operation of heating and power plants, regardless of whether they are in one-family houses or are large power facilities. Due to their rapidly growing share in the market, wood pellets are a considerable resource for the growing utilization of the biomasses in Europe and in other regions. They are, as well, an excellent instrument for local resources utilization, because, in material aspect, they contribute to environmental protection and control of climate changes. European Union has set itself the task of increasing the share of recycled energy sources for heat and electric power generation. Biomass plays a strategic role in the achievement of such tasks, as particularly wood pellets appear to be a key technology with some specific advantages. The wood pellets can be transported more cheaply and more easily, because of their high density, compared to other biomass forms, while, on the other hand, the high degree of standardization provides for exclusively low fuel emissions, even if wood pellets are poorly used. The wood pellets are also a very convenient fuel form for end users – they can be delivered by cistern-trucks or in bags and they are suitable to be used in automatic feeding systems, which makes them convenient for processing and time-saving, same as the systems, operating with gas or liquid fuels.
Our wood pellet machine XGJ with CE certificate (our patent) has the advantages of falt die pellet machine and ring die pellet machine. Our wood pellet machine is your best choice to make wood pellets.The heart part-double layer die has unique structural assembly and “rollers” are made of high wearable alloy materials.
Wood pellet machine Technical Parameter:
Model
Power (KW)
Capacity (T/H)
Weight (T)
Dimension
(mm)
XGJ450
55
0.6-1.0
4.5
2.3*2.09*2.15
XGJ550
75
0.8-1.5
6.04
2.63*1.0*2.40
XGJ560
90
1.2-1.8
6.1
2.6*1.3*2.3
XGJ580
160
1.5-2.5
7
2.9*1.3*2.4
XGJ850
220
2.5-3.5
14.5
3.3*1.4*3.1
XGJ880
315
3.5-5.0
18
3.8*1.68*3.4
Looking forward to cooperating with you.
Best regards,
Wendy (Miss wang)
Tel: 00 86 531 8348 3996
Mobile:00 86 18678866202
Fax: 00 86 531 83483378
Wood pellet machine
wood pellet machine
1 wood pellet machine with CE
2 wood pellet machine capacity: 1.2-1.5 T/H
3.automatic lubrication systerm
Wood pellet machine introduction:
Wood pellets are clean, carbon dioxide neutral and suitable fuel which is produced mainly by sawdust and waste, pressed under high pressure without gum or other supplements. The wood pellets are of cylindrical shape and normally their diameter is 6-10 mm and their length is 10-30 mm. Due to this fact, the wood pellets are highly standardized and pressed, which allows for reduction of transport costs; they, also, assist the automated operation of heating and power plants, regardless of whether they are in one-family houses or are large power facilities. Due to their rapidly growing share in the market, wood pellets are a considerable resource for the growing utilization of the biomasses in Europe and in other regions. They are, as well, an excellent instrument for local resources utilization, because, in material aspect, they contribute to environmental protection and control of climate changes. European Union has set itself the task of increasing the share of recycled energy sources for heat and electric power generation. Biomass plays a strategic role in the achievement of such tasks, as particularly wood pellets appear to be a key technology with some specific advantages. The wood pellets can be transported more cheaply and more easily, because of their high density, compared to other biomass forms, while, on the other hand, the high degree of standardization provides for exclusively low fuel emissions, even if wood pellets are poorly used. The wood pellets are also a very convenient fuel form for end users – they can be delivered by cistern-trucks or in bags and they are suitable to be used in automatic feeding systems, which makes them convenient for processing and time-saving, same as the systems, operating with gas or liquid fuels.
Our wood pellet machine XGJ with CE certificate (our patent) has the advantages of falt die pellet machine and ring die pellet machine. Our wood pellet machine is your best choice to make wood pellets.The heart part-double layer die has unique structural assembly and “rollers” are made of high wearable alloy materials.
Wood pellet machine Technical Parameter:
Model
Power (KW)
Capacity (T/H)
Weight (T)
Dimension
(mm)
XGJ450
55
0.6-1.0
4.5
2.3*2.09*2.15
XGJ550
75
0.8-1.5
6.04
2.63*1.0*2.40
XGJ560
90
1.2-1.8
6.1
2.6*1.3*2.3
XGJ580
160
1.5-2.5
7
2.9*1.3*2.4
XGJ850
220
2.5-3.5
14.5
3.3*1.4*3.1
XGJ880
315
3.5-5.0
18
3.8*1.68*3.4
Looking forward to cooperating with you.
Best regards,
Wendy (Miss wang)
Tel: 00 86 531 8348 3996
Mobile:00 86 1525412 3292
Fax: 00 86 531 8348 3997
1 wood pellet machine with CE
2 wood pellet machine capacity: 1.2-1.5 T/H
3.automatic lubrication systerm
Wood pellet machine introduction:
Wood pellets are clean, carbon dioxide neutral and suitable fuel which is produced mainly by sawdust and waste, pressed under high pressure without gum or other supplements. The wood pellets are of cylindrical shape and normally their diameter is 6-10 mm and their length is 10-30 mm. Due to this fact, the wood pellets are highly standardized and pressed, which allows for reduction of transport costs; they, also, assist the automated operation of heating and power plants, regardless of whether they are in one-family houses or are large power facilities. Due to their rapidly growing share in the market, wood pellets are a considerable resource for the growing utilization of the biomasses in Europe and in other regions. They are, as well, an excellent instrument for local resources utilization, because, in material aspect, they contribute to environmental protection and control of climate changes. European Union has set itself the task of increasing the share of recycled energy sources for heat and electric power generation. Biomass plays a strategic role in the achievement of such tasks, as particularly wood pellets appear to be a key technology with some specific advantages. The wood pellets can be transported more cheaply and more easily, because of their high density, compared to other biomass forms, while, on the other hand, the high degree of standardization provides for exclusively low fuel emissions, even if wood pellets are poorly used. The wood pellets are also a very convenient fuel form for end users – they can be delivered by cistern-trucks or in bags and they are suitable to be used in automatic feeding systems, which makes them convenient for processing and time-saving, same as the systems, operating with gas or liquid fuels.
Our wood pellet machine XGJ with CE certificate (our patent) has the advantages of falt die pellet machine and ring die pellet machine. Our wood pellet machine is your best choice to make wood pellets.The heart part-double layer die has unique structural assembly and “rollers” are made of high wearable alloy materials.
Wood pellet machine Technical Parameter:
Model
Power (KW)
Capacity (T/H)
Weight (T)
Dimension
(mm)
XGJ450
55
0.6-1.0
4.5
2.3*2.09*2.15
XGJ550
75
0.8-1.5
6.04
2.63*1.0*2.40
XGJ560
90
1.2-1.8
6.1
2.6*1.3*2.3
XGJ580
160
1.5-2.5
7
2.9*1.3*2.4
XGJ850
220
2.5-3.5
14.5
3.3*1.4*3.1
XGJ880
315
3.5-5.0
18
3.8*1.68*3.4
Looking forward to cooperating with you.
Best regards,
Wendy (Miss wang)
Tel: 00 86 531 8348 3996
Mobile:00 86 1525412 3292
Fax: 00 86 531 8348 3997
Wood pellet machine
wood pellet machine
(1)pellet machine with CE
(2) Automatic lubrcation system
(3) wood pellet Capacity: 1.2-1.8 T/H
Wood pellet machine
XGJ series wood pellet machine is our main product which has adopted the essence of pellet machine in oversea market. The heart part-double layer die has unique structural assembly and “rollers” are made of high wearable alloy materials.
A. wood pellet machine' Seven characteristics
1. Vertical feeding, so that the materials are directly in place.
2. Die is static and roller is rotary; materials are evenly distributed around because of centrifugal force.
3. Double-layer die. Two layers both can be used independently so the machine reduces the cost; What’s more, two layers of the die also can be used at the same time, in this way, the efficiency has been improved greatly.
4. One die with two different apertures. The pellets may have different specifications.
5. Macroporous die; wire joining circular tube; increasing travel; improving density.
6. Ring die and vertical structure are good for cooling the pelletizing room.
7. Independent and frequency conversion discharge device can ensure the rate of pellet formation.
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
If you are interested in our wood pellet machine, please do not hesiate to contact me. I will reply you as soon as possible.
Best regards,
Wendy
Mobile: 00 86 18678866202
Tel: 00 86 531 8348 3996
Fax: 00 86 531 8348 3997
(1)pellet machine with CE
(2) Automatic lubrcation system
(3) wood pellet Capacity: 1.2-1.8 T/H
Wood pellet machine
XGJ series wood pellet machine is our main product which has adopted the essence of pellet machine in oversea market. The heart part-double layer die has unique structural assembly and “rollers” are made of high wearable alloy materials.
A. wood pellet machine' Seven characteristics
1. Vertical feeding, so that the materials are directly in place.
2. Die is static and roller is rotary; materials are evenly distributed around because of centrifugal force.
3. Double-layer die. Two layers both can be used independently so the machine reduces the cost; What’s more, two layers of the die also can be used at the same time, in this way, the efficiency has been improved greatly.
4. One die with two different apertures. The pellets may have different specifications.
5. Macroporous die; wire joining circular tube; increasing travel; improving density.
6. Ring die and vertical structure are good for cooling the pelletizing room.
7. Independent and frequency conversion discharge device can ensure the rate of pellet formation.
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
If you are interested in our wood pellet machine, please do not hesiate to contact me. I will reply you as soon as possible.
Best regards,
Wendy
Mobile: 00 86 18678866202
Tel: 00 86 531 8348 3996
Fax: 00 86 531 8348 3997
Wooden Powder
Wooden Powder
30 years' manufacturing experience;
High-quality Products;
Competitive Prices;
Professional Service.
Wooden Powder
We are a large professional factory and exporter of bamboo products in China. We supply high quality wooden powder with low price and best service.
Welcome to contact us for details!
30 years' manufacturing experience;
High-quality Products;
Competitive Prices;
Professional Service.
Wooden Powder
We are a large professional factory and exporter of bamboo products in China. We supply high quality wooden powder with low price and best service.
Welcome to contact us for details!
Wooden and Bamboo Powder
Wooden and Bamboo Powder
30 years' manufacturing experience;
High-quality Products;
Competitive Prices;
Professional Service
Wooden and Bamboo Powder
We are a large professional factory and exporter of bamboo products in China. We supply high quality wooden and bamboo powder with low price and best service.
Welcome to contact us for details!
30 years' manufacturing experience;
High-quality Products;
Competitive Prices;
Professional Service
Wooden and Bamboo Powder
We are a large professional factory and exporter of bamboo products in China. We supply high quality wooden and bamboo powder with low price and best service.
Welcome to contact us for details!
Working Principle of briquettes machine From Dyan
Biocoal Forming Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
Wutong mountain100 units wind-solar hybrid street light
1,start-up 1m/s,cut-in 2.5m/s
2,magnetic levitation,high efficiency
3,safety, little vibration and noise
4,CE,ISO,Patents
INTEGRATED INTELLIGENCE, DYNAMIC FUTURE
PARAMETER
MAGLEV WIND TURBINE MODEL NUMBER
CXF400
CXF600
CXF1000
CXF2000
CXF3000
Rated Power
400W
600W
1000W
2000W
3000W
Size(Height / Diameter
1.06/1.2(M)
1.32/1.32(M)
2.1/2.0(M)
2.5/2.4(M)
3.2/3.5(M)
Turbine Weight
29KG
40KG
150KG
165KG
230KG
Blades Material
aluminum alloy
aluminum alloy
aluminum alloy
aluminum alloy
aluminum alloy
Blades Number
3
3
3
3
3
Minimum Start Wind Speed
1m/s
1m/s
1m/s
1m/s
1m/s
Minimum Power Generation Wind Speed
2m/s
2m/s
2m/s
2m/s
2.5m/s
Minimum Charge Wind Speed
2.5m/s
2.5m/s
3m/s
3m/s
3.5m/s
Rated Wind Speed
8m/s
8m/s
9m/s
9m/s
10m/s
Cut out Wind Speed
12m/s
12m/s
13m/s
13m/s
13m/s
Survival Wind Speed
65m/s
65m/s
60m/s
60m/s
60m/s
Generator Type
AC, 3 phases
AC, 3 phases
AC, 3 phases
AC, 3 phases
AC, 3 phases
Controller Output Voltage
12V
12V
24V
24V
48V
Controller Output Current
<20Amp
<20Amp
<50Amp
<80Amp
<130Amp
Controller Braking System
3-Phase short circuit by NFB brake
3-Phase short circuit by NFB brake
3-Phase short circuit by NFB brake
3-Phase short circuit by NFB brake
3-Phase short circuit by NFB brake
Ambient Temperature
.-30~50 °C
.-30~50 °C
.-30~50 °C
.-30~50 °C
.-30~50 °C
TIMAR SCENERY ENERGYTEVHNOLOGY CO., LTD
Dear sir or madam,
This is sophia from TIMAR which a maglev wind turbine manufacture in shenzhen, China. our company sell maglev wind turbine and wind-solar hybrid street light system.The products have 4 big advantages:
1,start-up 1m/s,cut-in 2.5m/s
2,magnetic levitation,high efficiency
3,safety, little vibration and noise
4,CE,ISO,Patents
we have 400w,600w,1kw,2kw,3kw and 5kw at present.
If our products interest you, pls do not hesitate to contact me.
Best regards,
sophia
2,magnetic levitation,high efficiency
3,safety, little vibration and noise
4,CE,ISO,Patents
INTEGRATED INTELLIGENCE, DYNAMIC FUTURE
PARAMETER
MAGLEV WIND TURBINE MODEL NUMBER
CXF400
CXF600
CXF1000
CXF2000
CXF3000
Rated Power
400W
600W
1000W
2000W
3000W
Size(Height / Diameter
1.06/1.2(M)
1.32/1.32(M)
2.1/2.0(M)
2.5/2.4(M)
3.2/3.5(M)
Turbine Weight
29KG
40KG
150KG
165KG
230KG
Blades Material
aluminum alloy
aluminum alloy
aluminum alloy
aluminum alloy
aluminum alloy
Blades Number
3
3
3
3
3
Minimum Start Wind Speed
1m/s
1m/s
1m/s
1m/s
1m/s
Minimum Power Generation Wind Speed
2m/s
2m/s
2m/s
2m/s
2.5m/s
Minimum Charge Wind Speed
2.5m/s
2.5m/s
3m/s
3m/s
3.5m/s
Rated Wind Speed
8m/s
8m/s
9m/s
9m/s
10m/s
Cut out Wind Speed
12m/s
12m/s
13m/s
13m/s
13m/s
Survival Wind Speed
65m/s
65m/s
60m/s
60m/s
60m/s
Generator Type
AC, 3 phases
AC, 3 phases
AC, 3 phases
AC, 3 phases
AC, 3 phases
Controller Output Voltage
12V
12V
24V
24V
48V
Controller Output Current
<20Amp
<20Amp
<50Amp
<80Amp
<130Amp
Controller Braking System
3-Phase short circuit by NFB brake
3-Phase short circuit by NFB brake
3-Phase short circuit by NFB brake
3-Phase short circuit by NFB brake
3-Phase short circuit by NFB brake
Ambient Temperature
.-30~50 °C
.-30~50 °C
.-30~50 °C
.-30~50 °C
.-30~50 °C
TIMAR SCENERY ENERGYTEVHNOLOGY CO., LTD
Dear sir or madam,
This is sophia from TIMAR which a maglev wind turbine manufacture in shenzhen, China. our company sell maglev wind turbine and wind-solar hybrid street light system.The products have 4 big advantages:
1,start-up 1m/s,cut-in 2.5m/s
2,magnetic levitation,high efficiency
3,safety, little vibration and noise
4,CE,ISO,Patents
we have 400w,600w,1kw,2kw,3kw and 5kw at present.
If our products interest you, pls do not hesitate to contact me.
Best regards,
sophia
XDC-series Injection Profile Multiplex Production Logging Tool
The string provides means of obtaining up to six parameters and a CCL curve with one trip into a well.
Main Applications
Determination of water injecting profiles
Water entry points
Downhole water viscosity
Specifications
Max. Temperature 150°C or 175°C
Max. Pressure 60MPa
O.D. 38 mm
Operating Mode
Voltage switching
Transmission Mode
Pulse sent on single-core
Specifications of the Sondes
CCL
Gamma Ray
Temperature tool
Releaser
Main Applications
Determination of water injecting profiles
Water entry points
Downhole water viscosity
Specifications
Max. Temperature 150°C or 175°C
Max. Pressure 60MPa
O.D. 38 mm
Operating Mode
Voltage switching
Transmission Mode
Pulse sent on single-core
Specifications of the Sondes
CCL
Gamma Ray
Temperature tool
Releaser
3 phase permanent magnet AC generator
permanent magnet generator:
1.Low start torque
2.Higher efficiency
3.Direct driven
4.Excellent heat elimination
permanent magnet generator:
Characteristics
with magnet material,very low setup torque reasonable structure, small and light, stable operation, easily installed, high efficient.
Main Specifications
Item
50W-300KW
Rated power
50W-300KW
Rated voltage
12/24/48/96/110/220/380/690V
Gear Box
No (Direct Drive)
Generator
3 Phase Permanent Magnet AC Generator
Line to line voltage
0-500V/1000V
connection
l at the bottom of cover there's port,make connectors of same diameter as this port, fix it with screws.
l make same taper on the connector of blades, or other types of shaft.
l 3 lines out, no connection order.
The pictures of our PMG:
1.Low start torque
2.Higher efficiency
3.Direct driven
4.Excellent heat elimination
permanent magnet generator:
Characteristics
with magnet material,very low setup torque reasonable structure, small and light, stable operation, easily installed, high efficient.
Main Specifications
Item
50W-300KW
Rated power
50W-300KW
Rated voltage
12/24/48/96/110/220/380/690V
Gear Box
No (Direct Drive)
Generator
3 Phase Permanent Magnet AC Generator
Line to line voltage
0-500V/1000V
connection
l at the bottom of cover there's port,make connectors of same diameter as this port, fix it with screws.
l make same taper on the connector of blades, or other types of shaft.
l 3 lines out, no connection order.
The pictures of our PMG:
XGJ560 Wood dust pellet making machine
wood dust pellet making machine
1CE, SGS,ISO9000
2 wood pellet machine capacity: 1.2-1.5 T/H
3.Diameter of wood pellet:4-12mm
Wood dust pellet making machine introduction:
Wood pellets are clean, carbon dioxide neutral and suitable fuel which is produced mainly by sawdust and waste, pressed under high pressure without gum or other supplements.
Our wood dust pellet making machine XGJ with CE certificate (our patent) has the advantages of falt die pellet machine and ring die pellet machine. Our wood dust pellet making machine is your best choice to make wood pellets.The heart part-double layer die has unique structural assembly and “rollers” are made of high wearable alloy materials.
Our wood dust pellet making machine is your best choice for hard wood, rice husk and so on.
Wood pellet machine Technical Parameter:
Model
Power (KW)
Capacity (T/H)
Weight (T)
Dimension
(mm)
XGJ450
55
0.6-1.0
4.5
2.3*2.09*2.15
XGJ550
75
0.8-1.5
6.04
2.63*1.0*2.40
XGJ560
90
1.2-1.8
6.1
2.6*1.3*2.3
XGJ580
160
1.5-2.5
7
2.9*1.3*2.4
XGJ850
220
2.5-3.5
14.5
3.3*1.4*3.1
XGJ880
315
3.5-5.0
18
3.8*1.68*3.4
Looking forward to cooperating with you.
Best regards,
Wendy (Miss wang)
Tel: 00 86 531 8348 3996
Mobile:00 86 18678866202
Fax: 00 86 531 83483378
1CE, SGS,ISO9000
2 wood pellet machine capacity: 1.2-1.5 T/H
3.Diameter of wood pellet:4-12mm
Wood dust pellet making machine introduction:
Wood pellets are clean, carbon dioxide neutral and suitable fuel which is produced mainly by sawdust and waste, pressed under high pressure without gum or other supplements.
Our wood dust pellet making machine XGJ with CE certificate (our patent) has the advantages of falt die pellet machine and ring die pellet machine. Our wood dust pellet making machine is your best choice to make wood pellets.The heart part-double layer die has unique structural assembly and “rollers” are made of high wearable alloy materials.
Our wood dust pellet making machine is your best choice for hard wood, rice husk and so on.
Wood pellet machine Technical Parameter:
Model
Power (KW)
Capacity (T/H)
Weight (T)
Dimension
(mm)
XGJ450
55
0.6-1.0
4.5
2.3*2.09*2.15
XGJ550
75
0.8-1.5
6.04
2.63*1.0*2.40
XGJ560
90
1.2-1.8
6.1
2.6*1.3*2.3
XGJ580
160
1.5-2.5
7
2.9*1.3*2.4
XGJ850
220
2.5-3.5
14.5
3.3*1.4*3.1
XGJ880
315
3.5-5.0
18
3.8*1.68*3.4
Looking forward to cooperating with you.
Best regards,
Wendy (Miss wang)
Tel: 00 86 531 8348 3996
Mobile:00 86 18678866202
Fax: 00 86 531 83483378
XGJ560 YULONG pellet machine biomass
pellet machine biomass
1Capacity 1T/H pellet machine
2Quality pellets with high density dia:4-15mm
3.patent pellet machine
Double layer hot selling pellet machine biomass
1. This type pellet machine biomass is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our pellet machine biomass has lubricanting System so it is also suitable for long time working.
3. Our pellet machine biomass can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
1Capacity 1T/H pellet machine
2Quality pellets with high density dia:4-15mm
3.patent pellet machine
Double layer hot selling pellet machine biomass
1. This type pellet machine biomass is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our pellet machine biomass has lubricanting System so it is also suitable for long time working.
3. Our pellet machine biomass can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
XGJ560 hot selling china pellet mill
China pellet mill
1. Capacity 1T/H pellet mill
2. high density pellets
3. Automatic lubrication
4. patent pellet mill
Double layer hot selling china pellet mill
1. This type pellet mill is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our hot selling china pellet mill has lubricanting System so it is also suitable for long time working.
3. Our hot selling pellet mill can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details of China pellet mill.
Best regards,
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
1. Capacity 1T/H pellet mill
2. high density pellets
3. Automatic lubrication
4. patent pellet mill
Double layer hot selling china pellet mill
1. This type pellet mill is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our hot selling china pellet mill has lubricanting System so it is also suitable for long time working.
3. Our hot selling pellet mill can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details of China pellet mill.
Best regards,
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
XGJ560 hot selling china wood pellet mill
China wood pellet mill
1. Capacity 1T/H pellet mill
2. high density pellets
3. Automatic lubrication
4. patent pellet mill
Double layer hot selling china wood pellet mill
1. This type wood pellet mill is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our hot selling china wood pellet mill has lubricanting System so it is also suitable for long time working.
3. Our hot selling wood pellet millcan press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
1. Capacity 1T/H pellet mill
2. high density pellets
3. Automatic lubrication
4. patent pellet mill
Double layer hot selling china wood pellet mill
1. This type wood pellet mill is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our hot selling china wood pellet mill has lubricanting System so it is also suitable for long time working.
3. Our hot selling wood pellet millcan press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
XGJ560 hot selling sawdust pellet mill
Sawdust pellet mill
1. Capacity 1T/H pellet mill
2. high density pellets
3. Automatic lubrication
4. patent pellet mill
Double layer hot selling sawdust pellet mill
1. This type pellet mill is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet mill and flat die pellet mill.
2.Our hot selling china pellet mill has lubricanting System so it is also suitable for long time working.
3. Our hot selling pellet mill can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details of sawdust pellet mill.
Best regards,
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
1. Capacity 1T/H pellet mill
2. high density pellets
3. Automatic lubrication
4. patent pellet mill
Double layer hot selling sawdust pellet mill
1. This type pellet mill is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet mill and flat die pellet mill.
2.Our hot selling china pellet mill has lubricanting System so it is also suitable for long time working.
3. Our hot selling pellet mill can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details of sawdust pellet mill.
Best regards,
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
XGJ560 pellet making machine
pellet making machine
1CE, SGS pellet machine
2 pellet making machine capacity: 1.2-1.5 T/H
3.Diameter of wood pellet:4-12m
pellet making machine introduction:
Biomass pellets are clean, carbon dioxide neutral and suitable fuel which is produced mainly by sawdust and waste, pressed under high pressure without gum or other supplements.
Our pellet making machine XGJ with CE certificate (our patent) has the advantages of falt die pellet machine and ring die pellet machine. Our wood dust pellet making machine is your best choice to make wood pellets.The heart part-double layer die has unique structural assembly and “rollers” are made of high wearable alloy materials.
Our pellet making machine is your best choice for hard wood, rice husk and so on.
pellet making machine Technical Parameter:
Model
Power (KW)
Capacity (T/H)
Weight (T)
Dimension
(mm)
XGJ450
55
0.6-1.0
4.5
2.3*2.09*2.15
XGJ550
75
0.8-1.5
6.04
2.63*1.0*2.40
XGJ560
90
1.2-1.8
6.1
2.6*1.3*2.3
XGJ580
160
1.5-2.5
7
2.9*1.3*2.4
XGJ850
220
2.5-3.5
14.5
3.3*1.4*3.1
XGJ880
315
3.5-5.0
18
3.8*1.68*3.4
Looking forward to cooperating with you.
Best regards,
Wendy (Miss wang)
Tel: 00 86 531 8348 3996
Mobile:00 86 18678866202
Fax: 00 86 531 83483378
1CE, SGS pellet machine
2 pellet making machine capacity: 1.2-1.5 T/H
3.Diameter of wood pellet:4-12m
pellet making machine introduction:
Biomass pellets are clean, carbon dioxide neutral and suitable fuel which is produced mainly by sawdust and waste, pressed under high pressure without gum or other supplements.
Our pellet making machine XGJ with CE certificate (our patent) has the advantages of falt die pellet machine and ring die pellet machine. Our wood dust pellet making machine is your best choice to make wood pellets.The heart part-double layer die has unique structural assembly and “rollers” are made of high wearable alloy materials.
Our pellet making machine is your best choice for hard wood, rice husk and so on.
pellet making machine Technical Parameter:
Model
Power (KW)
Capacity (T/H)
Weight (T)
Dimension
(mm)
XGJ450
55
0.6-1.0
4.5
2.3*2.09*2.15
XGJ550
75
0.8-1.5
6.04
2.63*1.0*2.40
XGJ560
90
1.2-1.8
6.1
2.6*1.3*2.3
XGJ580
160
1.5-2.5
7
2.9*1.3*2.4
XGJ850
220
2.5-3.5
14.5
3.3*1.4*3.1
XGJ880
315
3.5-5.0
18
3.8*1.68*3.4
Looking forward to cooperating with you.
Best regards,
Wendy (Miss wang)
Tel: 00 86 531 8348 3996
Mobile:00 86 18678866202
Fax: 00 86 531 83483378
XGJ560 sawdust pellet machine
pellet machine
1.Capacity 1T/H pellet machine
2.Quality pellets with high density diameter:4-15mm
3.patent pellet macchine
Double layer hot selling pellet machine
1. This type pellet machine is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our pellet machine has lubricanting System so it is also suitable for long time working.
3. Our pellet machine can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
1.Capacity 1T/H pellet machine
2.Quality pellets with high density diameter:4-15mm
3.patent pellet macchine
Double layer hot selling pellet machine
1. This type pellet machine is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our pellet machine has lubricanting System so it is also suitable for long time working.
3. Our pellet machine can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
XGJ560 sawdust pellet press
sawdust pellet press
1. Capacity 1T/H pellet press
2. high density pellets
3. Automatic lubrication
4. patent pellet press
Double layer vertical ring die sawdust pellet press
1. This type sawdust pellet press is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our sawdust pellet press has lubricanting System so it is also suitable for long time working.
3. Big model of sawdut pellet press can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
1. Capacity 1T/H pellet press
2. high density pellets
3. Automatic lubrication
4. patent pellet press
Double layer vertical ring die sawdust pellet press
1. This type sawdust pellet press is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our sawdust pellet press has lubricanting System so it is also suitable for long time working.
3. Big model of sawdut pellet press can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
XGJ560 sawdust pellet press
sawdust pellet press
1. Capacity 1T/H pellet press
2. high density pellets
3. Automatic lubrication
4. patent pellet press
Double layer ring die sawdust pellet press
1. This type sawdust pellet press is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our sawdust pellet press has lubricanting System so it is also suitable for long time working.
3. Big model of sawdust pellet press can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
1. Capacity 1T/H pellet press
2. high density pellets
3. Automatic lubrication
4. patent pellet press
Double layer ring die sawdust pellet press
1. This type sawdust pellet press is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our sawdust pellet press has lubricanting System so it is also suitable for long time working.
3. Big model of sawdust pellet press can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
XGJ560 sawdust pelleting machine
pelleting machine
1.Capacity 1T/H pelleting machine
2.Quality pellets with high density diameter:4-15mm
3.patent machine
Double layer hot selling pelleting machine
1. This type pelleting machine is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our pelleting machine has lubricanting System so it is also suitable for long time working.
3. Our pelleting machine can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
1.Capacity 1T/H pelleting machine
2.Quality pellets with high density diameter:4-15mm
3.patent machine
Double layer hot selling pelleting machine
1. This type pelleting machine is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our pelleting machine has lubricanting System so it is also suitable for long time working.
3. Our pelleting machine can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
3-4t/h Output Shisha Charcoal Briquette Machine
3-4t/h Output Shisha Charcoal Briquette Machine
1.CE Certification
2.Hot sale in Europe
3.Easy operation
3-4t/h Output
Shisha
Charcoal
Briquette
Machine
is applicable for making small round tablets from charcoal dust. The output charcoal briquettes are with high density, perfect even shape, good appearance. Meanwhile, it is easy for combustion, no smell and last longer when burning.
Shisha Charcoal production flow:
Charcoal dust—crusher—conveyor—mixer—conveyor—charcoal briquette press—final product (Shisha charcoal)
Main features:
Shisha Charcoal Briquette Press is applied to suppress tablets with large volume.
Special design is suitable for light powder materials.
Automatic feed and discharging.
Humanization design with easy clearance and maintenance.
Transmission system in main gear box below airtight is completely separated, reducing noise and wear.
Technical parameters of
charcoal briquette press
Model: TP-12
Model No: 11 sets
Compression strength:100 kn
Press diameter: 33 35 38 40 43 mm
Production capacity: 20-23times/minute 11pieces/time
Overall Dimension: 2500*900*1500 mm
3
Packing size:
1400*1100*1650 mm
3
Motor power: 7.5 kw
Host weight: 1500 kg
Shisha charcoal
1.CE Certification
2.Hot sale in Europe
3.Easy operation
3-4t/h Output
Shisha
Charcoal
Briquette
Machine
is applicable for making small round tablets from charcoal dust. The output charcoal briquettes are with high density, perfect even shape, good appearance. Meanwhile, it is easy for combustion, no smell and last longer when burning.
Shisha Charcoal production flow:
Charcoal dust—crusher—conveyor—mixer—conveyor—charcoal briquette press—final product (Shisha charcoal)
Main features:
Shisha Charcoal Briquette Press is applied to suppress tablets with large volume.
Special design is suitable for light powder materials.
Automatic feed and discharging.
Humanization design with easy clearance and maintenance.
Transmission system in main gear box below airtight is completely separated, reducing noise and wear.
Technical parameters of
charcoal briquette press
Model: TP-12
Model No: 11 sets
Compression strength:100 kn
Press diameter: 33 35 38 40 43 mm
Production capacity: 20-23times/minute 11pieces/time
Overall Dimension: 2500*900*1500 mm
3
Packing size:
1400*1100*1650 mm
3
Motor power: 7.5 kw
Host weight: 1500 kg
Shisha charcoal
XGJ560 vertical ring die wood stick machine
wood stick machine
1.Capacity 1T/H wood stick machine
2.high density sticks
3.patent pwood stick machine
Double layer hot selling wood stick machine
1. This type wood stick machine is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our wood stick machine has lubricanting System so it is also suitable for long time working.
3. Our wood stick machine can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
1.Capacity 1T/H wood stick machine
2.high density sticks
3.patent pwood stick machine
Double layer hot selling wood stick machine
1. This type wood stick machine is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our wood stick machine has lubricanting System so it is also suitable for long time working.
3. Our wood stick machine can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
XGJ560 wood pellet machine
wood pellet machine
1Capacity 1T/H pellet machine
2Quality pellets with high density diameter:4-15mm
3.patent pellet machine
Double layer hot selling wood pellet machine
1. This type wood pellet machine is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our wood pellet machine has lubricanting System so it is also suitable for long time working.
3. Our wood pellet machine can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
1Capacity 1T/H pellet machine
2Quality pellets with high density diameter:4-15mm
3.patent pellet machine
Double layer hot selling wood pellet machine
1. This type wood pellet machine is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our wood pellet machine has lubricanting System so it is also suitable for long time working.
3. Our wood pellet machine can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
XGJ560 wood pellet press
wood pellet press
1. Capacity 1T/H pellet press
2. high density pellets
3. Automatic lubrication
4. patent pellet press
Double layer ring die wood pellet press
1. This type wood pellet press is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our wood pellet press has lubricanting System so it is also suitable for long time working.
3. Big model of wood pellet press can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
1. Capacity 1T/H pellet press
2. high density pellets
3. Automatic lubrication
4. patent pellet press
Double layer ring die wood pellet press
1. This type wood pellet press is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our wood pellet press has lubricanting System so it is also suitable for long time working.
3. Big model of wood pellet press can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
XGJ560 wood pellet press
wood pellet press
1. Capacity 1T/H
2. high density pellets
3. Automatic lubrication
4. patent pellet press
Double layer ring die wood pellet press
1. This type Wood pellet press is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our wood pellet press has lubricanting System so it is also suitable for long time working.
3. Big model of wood pellet press can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatlywelcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
1. Capacity 1T/H
2. high density pellets
3. Automatic lubrication
4. patent pellet press
Double layer ring die wood pellet press
1. This type Wood pellet press is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our wood pellet press has lubricanting System so it is also suitable for long time working.
3. Big model of wood pellet press can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatlywelcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
XGJ560 wood sawdust pellet making machine
wood sawdust pellet making machine
1.Capacity 1T/H wood sawdust pellet machine
2.high density pellets
3.patent pellet machine
Double layer hot selling wood sawdust pellet making machine
1. This type wood sawdust pellet making machine is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our wood sawdust pellet making machine has lubricanting System so it is also suitable for long time working.
3. Our wood sawdust pellet making machine can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
1.Capacity 1T/H wood sawdust pellet machine
2.high density pellets
3.patent pellet machine
Double layer hot selling wood sawdust pellet making machine
1. This type wood sawdust pellet making machine is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our wood sawdust pellet making machine has lubricanting System so it is also suitable for long time working.
3. Our wood sawdust pellet making machine can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
XGJ560 wood sawdust pellets making machinery
pellets making machinery
1.Capacity 1T/H pellets machinery
2.high density pellets
3.patent CE, SGS pellets making machinery
Double layer hot selling wood sawdust pellets making machinery
1. This type wood sawdust pellets making machinery is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our wood sawdust pellets making machinery has lubricanting System so it is also suitable for long time working.
3. Our wood sawdust pellets making machinery can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
1.Capacity 1T/H pellets machinery
2.high density pellets
3.patent CE, SGS pellets making machinery
Double layer hot selling wood sawdust pellets making machinery
1. This type wood sawdust pellets making machinery is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our wood sawdust pellets making machinery has lubricanting System so it is also suitable for long time working.
3. Our wood sawdust pellets making machinery can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
XGJ850 ring die sawdust pellet machine
ring die sawdust pellet machine
1.Capacity 1T/H pellet machine
2.high density pellets
3.patent pellet machine
Double layer hot selling ring die sawdust pellet achine
1. This type ring die sawdust pellet machine is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our ring die sawdust pellet machine has lubricanting System so it is also suitable for long time working.
3. Our ring die sawdust pellet machine can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
1.Capacity 1T/H pellet machine
2.high density pellets
3.patent pellet machine
Double layer hot selling ring die sawdust pellet achine
1. This type ring die sawdust pellet machine is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our ring die sawdust pellet machine has lubricanting System so it is also suitable for long time working.
3. Our ring die sawdust pellet machine can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
Friday, May 6, 2011
XGJ850 ring die sawdust pellet mill
ring die sawdust pellet mill
1. Capacity 1T/H pellet mill
2. high density pellets
3. patent pellet mill
4. Vertical ring die
Double layer hot selling ring die sawdust pellet mill
1. This type ring die sawdust pellet mill is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our ring die sawdust pellet mill has lubricanting System so it is also suitable for long time working.
3. Our ring die sawdust pellet mill can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
1. Capacity 1T/H pellet mill
2. high density pellets
3. patent pellet mill
4. Vertical ring die
Double layer hot selling ring die sawdust pellet mill
1. This type ring die sawdust pellet mill is a unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our ring die sawdust pellet mill has lubricanting System so it is also suitable for long time working.
3. Our ring die sawdust pellet mill can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatly welcome to contact me for details
Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-8348337
YB6L-B
12AV,6AH,139*72.5*100
1,SUPERIOR 1,HIGH RATE PERFORMANCE
The electrically low resistant separator and heavyduty plates allow the Yuasa SUPER SEALED MF batteries to yield 30% more and faster starting power over conventional batteries.
2,LOWEST SELF-DISCHARGE
The calcium gird reduces the self-discharge rate only to 0.2% a day against 0.5-1.0%of conventional batteries.
3,LONGER STORAGE LIFE
The special plate material and the bone dry-charge construction enable the storage for nearly 2 years without noticeable loss of charge retention.
4,FITNESS FOR DEEP CYCLE USE
The heavy-duty plates are stong enough for deep cycle use.Even if the batteries are left discharged considerable long,a simple recharge will help restore a full charge.
1,SUPERIOR 1,HIGH RATE PERFORMANCE
The electrically low resistant separator and heavyduty plates allow the Yuasa SUPER SEALED MF batteries to yield 30% more and faster starting power over conventional batteries.
2,LOWEST SELF-DISCHARGE
The calcium gird reduces the self-discharge rate only to 0.2% a day against 0.5-1.0%of conventional batteries.
3,LONGER STORAGE LIFE
The special plate material and the bone dry-charge construction enable the storage for nearly 2 years without noticeable loss of charge retention.
4,FITNESS FOR DEEP CYCLE USE
The heavy-duty plates are stong enough for deep cycle use.Even if the batteries are left discharged considerable long,a simple recharge will help restore a full charge.
3.2V100Ah LIthium Battery can be used as EV power
1.Noninal voltage:3.2V
2.Capacity:100Ah
3.High power
4.Peak current:300A
2.Capacity:100Ah
3.High power
4.Peak current:300A
YDW electric heating type organic heat carrier furnace
This heating furnace takes electric power as the heat source and takes heat transfer oil as the carrier.
This heating furnace takes electric power as the heat source and takes heat transfer oil as the carrier. It is a direct current special type industrial furnace that makes use of the circular pump to transfer the heat-transfer oil forcibly to the equipment needing heat though the closed circulation and then returns to the heating furnace for heating again. This product has low pressure, high temperature, closed circuit liquid phase circulation conduction, little condensing loss, high thermal efficiency, stable heating and has no pollution because of taking electric power as heat source.
This heating furnace takes electric power as the heat source and takes heat transfer oil as the carrier. It is a direct current special type industrial furnace that makes use of the circular pump to transfer the heat-transfer oil forcibly to the equipment needing heat though the closed circulation and then returns to the heating furnace for heating again. This product has low pressure, high temperature, closed circuit liquid phase circulation conduction, little condensing loss, high thermal efficiency, stable heating and has no pollution because of taking electric power as heat source.
YQ-1000 Coal Briquette machine
YQ-1000 Coal Briquette machine
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-1000 Coal Briquette machine
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-1000
Power: 75 kw
Capacity: 25-30 tons/h
Diameter of roller: 1000 mm
Width of roller: 500 mm
Pressure: 60 kg/cubic meters
Pressure type: 2 rollers double mechanical press, both mechanical and hydraulic
Feed materials: coal dust, coke powder, ferrous and non-ferrous metal powder, ferric oxide sheet, dust, mud and refractories
Shape of final products: pillow, oval, square, cubic, round shape etc
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-1000 Coal Briquette machine
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-1000
Power: 75 kw
Capacity: 25-30 tons/h
Diameter of roller: 1000 mm
Width of roller: 500 mm
Pressure: 60 kg/cubic meters
Pressure type: 2 rollers double mechanical press, both mechanical and hydraulic
Feed materials: coal dust, coke powder, ferrous and non-ferrous metal powder, ferric oxide sheet, dust, mud and refractories
Shape of final products: pillow, oval, square, cubic, round shape etc
YQ-430 Coal Briquette machine
YQ-430 Coal Briquette machine
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-430 Coal Briquette machine
Briquette machine especially for make pillow shape coal and charcoal.
It is widely applied to produce powdered coal and fine coke balls,powered coal bar of fertilizer industry,applicable to mineral ball of chemical industry,applicable to mineral fines of different kinds of ferrous and non-ferrous metal,applicable to iron scale and dust elimination of metallurgy and applied to produce balls of sludge and refractories.
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-430
Power: 11 kw
Capacity: 6-8 tons/h
Diameter of roller: 430 mm
Width of roller:
Pressure: 60 kg/cubic meters
Pressure type: 4 rollers double mechanical press
Feed materials: coal dust, coke powder, ferrous and non-ferrous metal powder, ferric oxide sheet, dust, mud and refractories
Shape of final products: pillow, oval, square, cubic, round shape etc
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-430 Coal Briquette machine
Briquette machine especially for make pillow shape coal and charcoal.
It is widely applied to produce powdered coal and fine coke balls,powered coal bar of fertilizer industry,applicable to mineral ball of chemical industry,applicable to mineral fines of different kinds of ferrous and non-ferrous metal,applicable to iron scale and dust elimination of metallurgy and applied to produce balls of sludge and refractories.
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-430
Power: 11 kw
Capacity: 6-8 tons/h
Diameter of roller: 430 mm
Width of roller:
Pressure: 60 kg/cubic meters
Pressure type: 4 rollers double mechanical press
Feed materials: coal dust, coke powder, ferrous and non-ferrous metal powder, ferric oxide sheet, dust, mud and refractories
Shape of final products: pillow, oval, square, cubic, round shape etc
YQ-430 Coal Briquette machine
YQ-430 Coal Briquette machine
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-430 Coal Briquette machine
Briquette machine especially for make pillow shape coal and charcoal.
It is widely applied to produce powdered coal and fine coke balls,powered coal bar of fertilizer industry,applicable to mineral ball of chemical industry,applicable to mineral fines of different kinds of ferrous and non-ferrous metal,applicable to iron scale and dust elimination of metallurgy and applied to produce balls of sludge and refractories.
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-430
Power: 11 kw
Capacity: 6-8 tons/h
Diameter of roller: 430 mm
Width of roller:
Pressure: 60 kg/cubic meters
Pressure type: 4 rollers double mechanical press
Feed materials: coal dust, coke powder, ferrous and non-ferrous metal powder, ferric oxide sheet, dust, mud and refractories
Shape of final products: pillow, oval, square, cubic, round shape etc
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-430 Coal Briquette machine
Briquette machine especially for make pillow shape coal and charcoal.
It is widely applied to produce powdered coal and fine coke balls,powered coal bar of fertilizer industry,applicable to mineral ball of chemical industry,applicable to mineral fines of different kinds of ferrous and non-ferrous metal,applicable to iron scale and dust elimination of metallurgy and applied to produce balls of sludge and refractories.
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-430
Power: 11 kw
Capacity: 6-8 tons/h
Diameter of roller: 430 mm
Width of roller:
Pressure: 60 kg/cubic meters
Pressure type: 4 rollers double mechanical press
Feed materials: coal dust, coke powder, ferrous and non-ferrous metal powder, ferric oxide sheet, dust, mud and refractories
Shape of final products: pillow, oval, square, cubic, round shape etc
YQ-450 bbq briquette machine
YQ-450 bbq briquette machine
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-450 bbq briquette machine
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-450
Power: 15 kw
Capacity: 8 tons/h
Diameter of roller: 450 mm
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-450 bbq briquette machine
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-450
Power: 15 kw
Capacity: 8 tons/h
Diameter of roller: 450 mm
YQ-450 bbq briquette machine
YQ-450 bbq briquette machine
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-450 bbq briquette machine
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
Model: YQ-450
Power: 15 kw
Capacity: 8 tons/h
Diameter of roller: 450 mm
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-450 bbq briquette machine
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
Model: YQ-450
Power: 15 kw
Capacity: 8 tons/h
Diameter of roller: 450 mm
YQ-500 bbq briquette machine
YQ-500 Coal Briquette machine
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-500 bbq briquette machine
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-500
Power: 18.5 kw
Capacity: 8-10 tons/h
Diameter of roller: 500 mm
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-500 bbq briquette machine
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-500
Power: 18.5 kw
Capacity: 8-10 tons/h
Diameter of roller: 500 mm
YQ-650 Coal Briquette machine
YQ-430 Coal Briquette machine
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-650 Coal Briquette machine
Briquette machine especially for make pillow shape coal and charcoal.
It is widely applied to produce powdered coal and fine coke balls,powered coal bar of fertilizer industry,applicable to mineral ball of chemical industry,applicable to mineral fines of different kinds of ferrous and non-ferrous metal,applicable to iron scale and dust elimination of metallurgy and applied to produce balls of sludge and refractories.
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-650
Power: 30/37 kw
Capacity: 10-15 tons/h
Diameter of roller: 650 mm
Diameter of roller: 350 mm
Pressure: 60 kg/square meters
Pressure type: 2 rollers double mechanical press, both mechanical and hydraulic
Feed materials: coal dust, coke powder, ferrous and non-ferrous metal powder, ferric oxide sheet, dust, mud and refractories
Shape of final products: pillow, oval, square, cubic, round shape etc
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-650 Coal Briquette machine
Briquette machine especially for make pillow shape coal and charcoal.
It is widely applied to produce powdered coal and fine coke balls,powered coal bar of fertilizer industry,applicable to mineral ball of chemical industry,applicable to mineral fines of different kinds of ferrous and non-ferrous metal,applicable to iron scale and dust elimination of metallurgy and applied to produce balls of sludge and refractories.
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-650
Power: 30/37 kw
Capacity: 10-15 tons/h
Diameter of roller: 650 mm
Diameter of roller: 350 mm
Pressure: 60 kg/square meters
Pressure type: 2 rollers double mechanical press, both mechanical and hydraulic
Feed materials: coal dust, coke powder, ferrous and non-ferrous metal powder, ferric oxide sheet, dust, mud and refractories
Shape of final products: pillow, oval, square, cubic, round shape etc
YQ-650 bbq briquette machine
YQ-650 Coal Briquette machine
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-650 bbq briquette machine
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-650
Power: 30/37 kw
Capacity: 10-15 tons/h
Diameter of roller: 650 mm
Diameter of roller: 350 mm
Pressure: 60 kg/square meters
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-650 bbq briquette machine
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-650
Power: 30/37 kw
Capacity: 10-15 tons/h
Diameter of roller: 650 mm
Diameter of roller: 350 mm
Pressure: 60 kg/square meters
YQ-850 Coal Briquette machine
YQ-850 Coal Briquette machine
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-850 Coal Briquette machine
Briquette machine especially for make pillow shape coal and charcoal.
It is widely applied to produce powdered coal and fine coke balls,powered coal bar of fertilizer industry,applicable to mineral ball of chemical industry,applicable to mineral fines of different kinds of ferrous and non-ferrous metal,applicable to iron scale and dust elimination of metallurgy and applied to produce balls of sludge and refractories.
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-850
Power: 55 kw
Capacity: 15-20 tons/h
Diameter of roller: 850 mm
Width of roller:
Pressure:
Pressure type: 2 rollers double mechanical press, both mechanical and hydraulic
Feed materials: coal dust, coke powder, ferrous and non-ferrous metal powder, ferric oxide sheet, dust, mud and refractories
Shape of final products: pillow, oval, square, cubic, round shape etc
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-850 Coal Briquette machine
Briquette machine especially for make pillow shape coal and charcoal.
It is widely applied to produce powdered coal and fine coke balls,powered coal bar of fertilizer industry,applicable to mineral ball of chemical industry,applicable to mineral fines of different kinds of ferrous and non-ferrous metal,applicable to iron scale and dust elimination of metallurgy and applied to produce balls of sludge and refractories.
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-850
Power: 55 kw
Capacity: 15-20 tons/h
Diameter of roller: 850 mm
Width of roller:
Pressure:
Pressure type: 2 rollers double mechanical press, both mechanical and hydraulic
Feed materials: coal dust, coke powder, ferrous and non-ferrous metal powder, ferric oxide sheet, dust, mud and refractories
Shape of final products: pillow, oval, square, cubic, round shape etc
3.2V100Ah LIthium Battery with high power, environmental
1.Noninal voltage:3.2V
2.Capacity:100Ah
3.High power
4.Peak current:300A
2.Capacity:100Ah
3.High power
4.Peak current:300A
YQ-850 bbq briquette machine
YQ-1000 Coal Briquette machine
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-850 bbq briquette machine
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-850
Power: 55 kw
Capacity: 15-20 tons/h
Diameter of roller: 850 mm
a) CE Certificate
b) Lifetime warranty
c) Stable performance...
YQ-850 bbq briquette machine
Our briquette press machines are four-roller double-pressing type. This type of briquette machines can apply higher pressures and thus produce higher density briquettes.
1)This Biomass/Charcoal Briquette Screw Press equipped with automatic temperature control is designed to produce high density charcoal. Briquetting is a process that converts biomass into briquettes under high pressure and high temperature.
2)Raw materials: sawdust, raw wood, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste, mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks, rice husks, forestry wastes, branches, wood chips, etc.
3)The whole process for making briquettes:
Crushing—Drying—Briquetting
4)The suitable briquetting size of the raw material should be 3-5mm as showed below
5)The suitable moisture content of the raw material for briquetting is 8-12%
Model: YQ-850
Power: 55 kw
Capacity: 15-20 tons/h
Diameter of roller: 850 mm
YULONG wood pellet mill
wood pellet mill
1. wood Pellet mill with CE, SGS
2. Pellet mill can press wood pellets, animal feed and organic fertlizer.
wood pellet mill
1. Our wood pellet mill (Patent NO:200720157337.9 ) with CE certificate adopted the techonology from Germany( KAHL )13 years ago. And our patent--Taper Shape Rollers reduce the friction between flat die and rollers, so the lifetime of the die and rollers lengthened a lot. It is your best choice to press biomass pellet, such as wood pellet, straw pellet, rice husk pellet and so on.
2. For SKJ3- Series wood pellet machine , we have the oil pump matched with the machine, which can lubricate the rollers automatically when they are working.
3. Because of the high pressure and stable operation, our wood pellet machine (flat die pellet mill) can make good density pellets without bond. The materials that can be used for making pellets by wood pellet machine are as follows:
Coarse fiber: wood sawdust, corn stalk, rice husk, cotton stalk, weeds, crop straw, paper, plastic, cocopeat, bran, home wastage, factory reject and so on.
Our pellet machine can also make feed from corn, soybean, and so on. Also can be used for making biological fertilizer, organic fertilizer etc.
4. The following specifications about the capacity is for wood pellet, if the machines are used for making feed pellets or fertilizer pellets, the capacity will be doubled or three times.
Model
Output(kg/h)
Power (kw)
Diameter of pellet (mm)
Weight(t)
Size(mm)
Note
SKJ2-200
100-160
11
Φ4-6
0.28
1300×500×850
Diesel engine and motor dual-use
SKJ2-250
160-260
15
Φ4-6
0.5
1400×600×1000
SKJ2-300
300-500
30
Φ4-8
0.76
1860×670×1600
SKJ3-350A
400-600
37
Φ4.5-10
2.2
1900×850×1700
Gear rotation
Auto-Lubrication systerm
SKJ3-450A
500-800
55
Φ4.5-10
4.3
2300×1100×1900
SKJ3-550A
1000-1500
90
Φ4.5-12
5.5
2350×1000×2050
SKJ3-800
1500-2500
130-160
Φ4.5-12
6.8
3200×1235×2700
SKJ4-1200
3000-5000
280-320
Φ4.5-15
19
3800×1700×4200
SKJ300B
100-200
11
Briquette diamete: Φ6-25
Press size:
20×30
0.8
1170×420×850
SKJ3-350B
200-500
30
2
1500×1600×1750
Auto-Lubrication systerm
SKJ3-450B
400-700
45
3.5
1980×900×1700
SKJ3-550B
600-1000
75
2.8
1575×2300×1950
If you are interested in our wood pellet machine, please do not hesitate to contact us!
Best regards
Miss Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-83483378
1. wood Pellet mill with CE, SGS
2. Pellet mill can press wood pellets, animal feed and organic fertlizer.
wood pellet mill
1. Our wood pellet mill (Patent NO:200720157337.9 ) with CE certificate adopted the techonology from Germany( KAHL )13 years ago. And our patent--Taper Shape Rollers reduce the friction between flat die and rollers, so the lifetime of the die and rollers lengthened a lot. It is your best choice to press biomass pellet, such as wood pellet, straw pellet, rice husk pellet and so on.
2. For SKJ3- Series wood pellet machine , we have the oil pump matched with the machine, which can lubricate the rollers automatically when they are working.
3. Because of the high pressure and stable operation, our wood pellet machine (flat die pellet mill) can make good density pellets without bond. The materials that can be used for making pellets by wood pellet machine are as follows:
Coarse fiber: wood sawdust, corn stalk, rice husk, cotton stalk, weeds, crop straw, paper, plastic, cocopeat, bran, home wastage, factory reject and so on.
Our pellet machine can also make feed from corn, soybean, and so on. Also can be used for making biological fertilizer, organic fertilizer etc.
4. The following specifications about the capacity is for wood pellet, if the machines are used for making feed pellets or fertilizer pellets, the capacity will be doubled or three times.
Model
Output(kg/h)
Power (kw)
Diameter of pellet (mm)
Weight(t)
Size(mm)
Note
SKJ2-200
100-160
11
Φ4-6
0.28
1300×500×850
Diesel engine and motor dual-use
SKJ2-250
160-260
15
Φ4-6
0.5
1400×600×1000
SKJ2-300
300-500
30
Φ4-8
0.76
1860×670×1600
SKJ3-350A
400-600
37
Φ4.5-10
2.2
1900×850×1700
Gear rotation
Auto-Lubrication systerm
SKJ3-450A
500-800
55
Φ4.5-10
4.3
2300×1100×1900
SKJ3-550A
1000-1500
90
Φ4.5-12
5.5
2350×1000×2050
SKJ3-800
1500-2500
130-160
Φ4.5-12
6.8
3200×1235×2700
SKJ4-1200
3000-5000
280-320
Φ4.5-15
19
3800×1700×4200
SKJ300B
100-200
11
Briquette diamete: Φ6-25
Press size:
20×30
0.8
1170×420×850
SKJ3-350B
200-500
30
2
1500×1600×1750
Auto-Lubrication systerm
SKJ3-450B
400-700
45
3.5
1980×900×1700
SKJ3-550B
600-1000
75
2.8
1575×2300×1950
If you are interested in our wood pellet machine, please do not hesitate to contact us!
Best regards
Miss Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-83483378
YULONG Biomass pellet plant with CE
pellet plant
1) CE certificate pellet plant
2)may include wood chipper, hammer mill, dryer, pellet mill, cooler and so on.
biomass pellet plant instruction
Biomass Pellet Plant is the process of making waste materials into solid fuel. The objects are used for burning purposes. Wood Pellet can be made from any type of Agro-Forestry waste: Groundnut-shell Sugarcane Biogases Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Coir Pitch Barks/Straws Rice Husks Forestry wastes Wood Chips and many other Agro wastes.
Biomass Pellet Plant may include wood chippers/grass cutter, hammer mills, driers, mixers, pellet mills, coolers, screeners, packing machines and other related machines. Different flow chart should be designed for varied material conditions.
We have installed many whole pellet plant all over the world.
If you also need the lines, please do not hesitate to contact us.
Best regards,
Wendy (Miss wang)
Zhangqiu Yulong Machine Co., Ltd
Tel: 00 86 531 8348 3996
Mobile: 00 86 18678866202
Fax: 008 6531 83483378
1) CE certificate pellet plant
2)may include wood chipper, hammer mill, dryer, pellet mill, cooler and so on.
biomass pellet plant instruction
Biomass Pellet Plant is the process of making waste materials into solid fuel. The objects are used for burning purposes. Wood Pellet can be made from any type of Agro-Forestry waste: Groundnut-shell Sugarcane Biogases Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Coir Pitch Barks/Straws Rice Husks Forestry wastes Wood Chips and many other Agro wastes.
Biomass Pellet Plant may include wood chippers/grass cutter, hammer mills, driers, mixers, pellet mills, coolers, screeners, packing machines and other related machines. Different flow chart should be designed for varied material conditions.
We have installed many whole pellet plant all over the world.
If you also need the lines, please do not hesitate to contact us.
Best regards,
Wendy (Miss wang)
Zhangqiu Yulong Machine Co., Ltd
Tel: 00 86 531 8348 3996
Mobile: 00 86 18678866202
Fax: 008 6531 83483378
YULONG Biomass pellet production line with CE
pellet production line
1) CE pellet line
2)may include wood chipper, hammer mill, dryer, pellet mill, cooler and so on
biomass pellet production line instruction
Biomass Pellet production line is the process of making waste materials into solid fuel. The objects are used for burning purposes. Wood Pellet can be made from any type of Agro-Forestry waste: Groundnut-shell Sugarcane Biogases Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Coir Pitch Barks/Straws Rice Husks Forestry wastes Wood Chips and many other Agro wastes.
Biomass Pellet production line may include wood chippers/grass cutter, hammer mills, driers, mixers, pellet mills, coolers, screeners, packing machines and other related machines. Different flow chart should be designed for varied material conditions.
We have installed many whole pellet production lines all over the world.
If you also need the lines, please do not hesitate to contact us.
Best regards,
Wendy (Miss wang)
Zhangqiu Yulong Machine Co., Ltd
Tel: 00 86 531 8348 3996
Mobile: 00 86 18678866202
Fax: 008 6531 83483378
1) CE pellet line
2)may include wood chipper, hammer mill, dryer, pellet mill, cooler and so on
biomass pellet production line instruction
Biomass Pellet production line is the process of making waste materials into solid fuel. The objects are used for burning purposes. Wood Pellet can be made from any type of Agro-Forestry waste: Groundnut-shell Sugarcane Biogases Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Coir Pitch Barks/Straws Rice Husks Forestry wastes Wood Chips and many other Agro wastes.
Biomass Pellet production line may include wood chippers/grass cutter, hammer mills, driers, mixers, pellet mills, coolers, screeners, packing machines and other related machines. Different flow chart should be designed for varied material conditions.
We have installed many whole pellet production lines all over the world.
If you also need the lines, please do not hesitate to contact us.
Best regards,
Wendy (Miss wang)
Zhangqiu Yulong Machine Co., Ltd
Tel: 00 86 531 8348 3996
Mobile: 00 86 18678866202
Fax: 008 6531 83483378
YULONG CE hard wood pelletizer
rihard wood pelletizer
1. CE hard wood pelletizer
2. high density pellets
3. Automatic lubrication
4. patent pelletizer
Double layer ring die hard wood pelletizer
1. This type hard wood pelletizer is unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our pelletizer has lubricanting System so it is also suitable for long time working.
3. Big model of wood pelletizer can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
5. The following specifications about the capacity is for wood pellet, if the machines are used for making feed pellets or fertilizer pellets, the capacity will be doubled or three times.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
If you are interested in our hard wood pelletizer , please do not hesitate to contact us!
Best regards
Wendy wang
MP.: 0086-18678866202
Fax: 0086-531-83483378
1. CE hard wood pelletizer
2. high density pellets
3. Automatic lubrication
4. patent pelletizer
Double layer ring die hard wood pelletizer
1. This type hard wood pelletizer is unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our pelletizer has lubricanting System so it is also suitable for long time working.
3. Big model of wood pelletizer can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
5. The following specifications about the capacity is for wood pellet, if the machines are used for making feed pellets or fertilizer pellets, the capacity will be doubled or three times.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
If you are interested in our hard wood pelletizer , please do not hesitate to contact us!
Best regards
Wendy wang
MP.: 0086-18678866202
Fax: 0086-531-83483378
YULONG Home use sawdust pellet mill
home use sawdust pellet mill
1. Pellet mill with CE
2. Pellet mill can press wood pellets, animal feed and organic fertlizer.
home use sawdust pellet mill
1. Our sawdut pellet mill (Patent NO:200720157337.9 ) with CE certificate adopted the techonology from Germany( KAHL )13 years ago. And our patent--Taper Shape Rollers reduce the friction between flat die and rollers, so the lifetime of the die and rollers lengthened a lot. It is your best choice to press biomass pellet, such as wood pellet, straw pellet, rice husk pellet and so on.
2. For SKJ3- Series sawdust pellet machine, we have the oil pump matched with the machine, which can lubricate the rollers automatically when they are working.
3. Because of the high pressure and stable operation, our wood pellet machine (flat die pellet mill) can make good density pellets without bond. The materials that can be used for making pellets by wood pellet machine are as follows:
Coarse fiber: wood sawdust, corn stalk, rice husk, cotton stalk, weeds, crop straw, paper, plastic, cocopeat, bran, home wastage, factory reject and so on.
Our pellet machine can also make feed from corn, soybean, and so on. Also can be used for making biological fertilizer, organic fertilizer etc.
4. The following specifications about the capacity is for wood pellet, if the machines are used for making feed pellets or fertilizer pellets, the capacity will be doubled or three times.
Model
Output(kg/h)
Power (kw)
Diameter of pellet (mm)
Weight(t)
Size(mm)
Note
SKJ2-200
100-160
11
Φ4-6
0.28
1300×500×850
Diesel engine and motor dual-use
SKJ2-250
160-260
15
Φ4-6
0.5
1400×600×1000
SKJ2-300
300-500
30
Φ4-8
0.76
1860×670×1600
SKJ3-350A
400-600
37
Φ4.5-10
2.2
1900×850×1700
Gear rotation
Auto-Lubrication systerm
SKJ3-450A
500-800
55
Φ4.5-10
4.3
2300×1100×1900
SKJ3-550A
1000-1500
90
Φ4.5-12
5.5
2350×1000×2050
SKJ3-800
1500-2500
130-160
Φ4.5-12
6.8
3200×1235×2700
SKJ4-1200
3000-5000
280-320
Φ4.5-15
19
3800×1700×4200
SKJ300B
100-200
11
Briquette diamete: Φ6-25
Press size:
20×30
0.8
1170×420×850
SKJ3-350B
200-500
30
2
1500×1600×1750
Auto-Lubrication systerm
SKJ3-450B
400-700
45
3.5
1980×900×1700
SKJ3-550B
600-1000
75
2.8
1575×2300×1950
If you are interested in our sawdust pellet machines, please do not hesitate to contact us!
Best regards
Miss Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-83483378
1. Pellet mill with CE
2. Pellet mill can press wood pellets, animal feed and organic fertlizer.
home use sawdust pellet mill
1. Our sawdut pellet mill (Patent NO:200720157337.9 ) with CE certificate adopted the techonology from Germany( KAHL )13 years ago. And our patent--Taper Shape Rollers reduce the friction between flat die and rollers, so the lifetime of the die and rollers lengthened a lot. It is your best choice to press biomass pellet, such as wood pellet, straw pellet, rice husk pellet and so on.
2. For SKJ3- Series sawdust pellet machine, we have the oil pump matched with the machine, which can lubricate the rollers automatically when they are working.
3. Because of the high pressure and stable operation, our wood pellet machine (flat die pellet mill) can make good density pellets without bond. The materials that can be used for making pellets by wood pellet machine are as follows:
Coarse fiber: wood sawdust, corn stalk, rice husk, cotton stalk, weeds, crop straw, paper, plastic, cocopeat, bran, home wastage, factory reject and so on.
Our pellet machine can also make feed from corn, soybean, and so on. Also can be used for making biological fertilizer, organic fertilizer etc.
4. The following specifications about the capacity is for wood pellet, if the machines are used for making feed pellets or fertilizer pellets, the capacity will be doubled or three times.
Model
Output(kg/h)
Power (kw)
Diameter of pellet (mm)
Weight(t)
Size(mm)
Note
SKJ2-200
100-160
11
Φ4-6
0.28
1300×500×850
Diesel engine and motor dual-use
SKJ2-250
160-260
15
Φ4-6
0.5
1400×600×1000
SKJ2-300
300-500
30
Φ4-8
0.76
1860×670×1600
SKJ3-350A
400-600
37
Φ4.5-10
2.2
1900×850×1700
Gear rotation
Auto-Lubrication systerm
SKJ3-450A
500-800
55
Φ4.5-10
4.3
2300×1100×1900
SKJ3-550A
1000-1500
90
Φ4.5-12
5.5
2350×1000×2050
SKJ3-800
1500-2500
130-160
Φ4.5-12
6.8
3200×1235×2700
SKJ4-1200
3000-5000
280-320
Φ4.5-15
19
3800×1700×4200
SKJ300B
100-200
11
Briquette diamete: Φ6-25
Press size:
20×30
0.8
1170×420×850
SKJ3-350B
200-500
30
2
1500×1600×1750
Auto-Lubrication systerm
SKJ3-450B
400-700
45
3.5
1980×900×1700
SKJ3-550B
600-1000
75
2.8
1575×2300×1950
If you are interested in our sawdust pellet machines, please do not hesitate to contact us!
Best regards
Miss Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-83483378
YULONG corn stalk pellet machine
corn stalk pellet machine
(1)pellet machine with CE
(2)Automatic lubrcation system
(3) corn stalkpellet Capacity: 1.5-1.8 T/H
Corn stalk pellet machine
XGJ series rice husk pellet machine is our main product which has adopted the essence of pellet machine in oversea market. The heart part-double layer die has unique structural assembly and “rollers” are made of high wearable alloy materials.
A. rice husk pellet machine' Seven characteristics
1. Vertical feeding, so that the materials are directly in place.
2. Die is static and roller is rotary; materials are evenly distributed around because of centrifugal force.
3. Double-layer die. Two layers both can be used independently so the machine reduces the cost; What’s more, two layers of the die also can be used at the same time, in this way, the efficiency has been improved greatly.
4. One die with two different apertures. The pellets may have different specifications.
5. Macroporous die; wire joining circular tube; increasing travel; improving density.
6. Ring die and vertical structure are good for cooling the pelletizing room.
7. Independent and frequency conversion discharge device can ensure the rate of pellet formation.
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
If you are interested in our corn stalk pellet machine, please do not hesiate to contact me. I will reply you as soon as possible.
Best regards,
Wendy
Mobile: 00 86 18678866202
Fax: 00 86 531 8348 3997
(1)pellet machine with CE
(2)Automatic lubrcation system
(3) corn stalkpellet Capacity: 1.5-1.8 T/H
Corn stalk pellet machine
XGJ series rice husk pellet machine is our main product which has adopted the essence of pellet machine in oversea market. The heart part-double layer die has unique structural assembly and “rollers” are made of high wearable alloy materials.
A. rice husk pellet machine' Seven characteristics
1. Vertical feeding, so that the materials are directly in place.
2. Die is static and roller is rotary; materials are evenly distributed around because of centrifugal force.
3. Double-layer die. Two layers both can be used independently so the machine reduces the cost; What’s more, two layers of the die also can be used at the same time, in this way, the efficiency has been improved greatly.
4. One die with two different apertures. The pellets may have different specifications.
5. Macroporous die; wire joining circular tube; increasing travel; improving density.
6. Ring die and vertical structure are good for cooling the pelletizing room.
7. Independent and frequency conversion discharge device can ensure the rate of pellet formation.
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
If you are interested in our corn stalk pellet machine, please do not hesiate to contact me. I will reply you as soon as possible.
Best regards,
Wendy
Mobile: 00 86 18678866202
Fax: 00 86 531 8348 3997
YULONG pellet machine for sawdust
pellet machine for sawdust
1.Pellet machine with CE
2.Pellet machine can press wood pellets, animal feed and organic fertlize
pellet machine for sawdust
1. Our pellet machine for sawdust (Patent NO:200720157337.9 ) with CE certificate adopted the techonology from Germany( KAHL )13 years ago. And our patent--Taper Shape Rollers reduce the friction between flat die and rollers, so the lifetime of the die and rollers lengthened a lot. It is your best choice to press biomass pellet, such as wood pellet, straw pellet, rice husk pellet and so on.
2. For SKJ3- Series pellet machine for sawdust, we have the oil pump matched with the machine, which can lubricate the rollers automatically when they are working.
3. Because of the high pressure and stable operation, our wood pellet machine (flat die pellet mill) can make good density pellets without bond. The materials that can be used for making pellets by wood pellet machine are as follows:
Coarse fiber: wood sawdust, corn stalk, rice husk, cotton stalk, weeds, crop straw, paper, plastic, cocopeat, bran, home wastage, factory reject and so on.
Our pellet machine can also make feed from corn, soybean, and so on. Also can be used for making biological fertilizer, organic fertilizer etc.
4. The following specifications about the capacity is for wood pellet, if the machines are used for making feed pellets or fertilizer pellets, the capacity will be doubled or three times.
Model
Output(kg/h)
Power (kw)
Diameter of pellet (mm)
Weight(t)
Size(mm)
Note
SKJ2-200
100-160
11
Φ4-6
0.28
1300×500×850
Diesel engine and motor dual-use
SKJ2-250
160-260
15
Φ4-6
0.5
1400×600×1000
SKJ2-300
300-500
30
Φ4-8
0.76
1860×670×1600
SKJ3-350A
400-600
37
Φ4.5-10
2.2
1900×850×1700
Gear rotation
Auto-Lubrication systerm
SKJ3-450A
500-800
55
Φ4.5-10
4.3
2300×1100×1900
SKJ3-550A
1000-1500
90
Φ4.5-12
5.5
2350×1000×2050
SKJ3-800
1500-2500
130-160
Φ4.5-12
6.8
3200×1235×2700
SKJ4-1200
3000-5000
280-320
Φ4.5-15
19
3800×1700×4200
SKJ300B
100-200
11
Briquette diamete: Φ6-25
Press size:
20×30
0.8
1170×420×850
SKJ3-350B
200-500
30
2
1500×1600×1750
Auto-Lubrication systerm
SKJ3-450B
400-700
45
3.5
1980×900×1700
SKJ3-550B
600-1000
75
2.8
1575×2300×1950
If you are interested in our pellet machines for sawdust, please do not hesitate to contact us!
Best regards
Miss Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-83483378
1.Pellet machine with CE
2.Pellet machine can press wood pellets, animal feed and organic fertlize
pellet machine for sawdust
1. Our pellet machine for sawdust (Patent NO:200720157337.9 ) with CE certificate adopted the techonology from Germany( KAHL )13 years ago. And our patent--Taper Shape Rollers reduce the friction between flat die and rollers, so the lifetime of the die and rollers lengthened a lot. It is your best choice to press biomass pellet, such as wood pellet, straw pellet, rice husk pellet and so on.
2. For SKJ3- Series pellet machine for sawdust, we have the oil pump matched with the machine, which can lubricate the rollers automatically when they are working.
3. Because of the high pressure and stable operation, our wood pellet machine (flat die pellet mill) can make good density pellets without bond. The materials that can be used for making pellets by wood pellet machine are as follows:
Coarse fiber: wood sawdust, corn stalk, rice husk, cotton stalk, weeds, crop straw, paper, plastic, cocopeat, bran, home wastage, factory reject and so on.
Our pellet machine can also make feed from corn, soybean, and so on. Also can be used for making biological fertilizer, organic fertilizer etc.
4. The following specifications about the capacity is for wood pellet, if the machines are used for making feed pellets or fertilizer pellets, the capacity will be doubled or three times.
Model
Output(kg/h)
Power (kw)
Diameter of pellet (mm)
Weight(t)
Size(mm)
Note
SKJ2-200
100-160
11
Φ4-6
0.28
1300×500×850
Diesel engine and motor dual-use
SKJ2-250
160-260
15
Φ4-6
0.5
1400×600×1000
SKJ2-300
300-500
30
Φ4-8
0.76
1860×670×1600
SKJ3-350A
400-600
37
Φ4.5-10
2.2
1900×850×1700
Gear rotation
Auto-Lubrication systerm
SKJ3-450A
500-800
55
Φ4.5-10
4.3
2300×1100×1900
SKJ3-550A
1000-1500
90
Φ4.5-12
5.5
2350×1000×2050
SKJ3-800
1500-2500
130-160
Φ4.5-12
6.8
3200×1235×2700
SKJ4-1200
3000-5000
280-320
Φ4.5-15
19
3800×1700×4200
SKJ300B
100-200
11
Briquette diamete: Φ6-25
Press size:
20×30
0.8
1170×420×850
SKJ3-350B
200-500
30
2
1500×1600×1750
Auto-Lubrication systerm
SKJ3-450B
400-700
45
3.5
1980×900×1700
SKJ3-550B
600-1000
75
2.8
1575×2300×1950
If you are interested in our pellet machines for sawdust, please do not hesitate to contact us!
Best regards
Miss Wendy wang
Zhangqiu Yulong Machine Co., Ltd
MP.: 0086-18678866202
Fax: 0086-531-83483378
3.2V100Ah Lithium-ion Power Battery
Lithium Power Battery
1. E-car,E-bus,E-boat
2.3.2V100Ah high power
3.High capacity
1. E-car,E-bus,E-boat
2.3.2V100Ah high power
3.High capacity
YULONG wood pelleter
wood pelleter
1. CE pelleter
2. high density pellets
3. Automatic lubrication
4. patent pelleter
Double layer ring die wood pelleter
1. This type Wood pelleter unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our pelleter has lubricanting System so it is also suitable for long time working.
3. Big model of wood pelleter can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatlywelcome to contact me for details
Wendy wang
MP.: 0086-18678866202
Fax: 0086-531-8348337
1. CE pelleter
2. high density pellets
3. Automatic lubrication
4. patent pelleter
Double layer ring die wood pelleter
1. This type Wood pelleter unique designed pellet machine, which combined the advantage of both horizontal ring die pellet machine and flat die pellet machine.
2.Our pelleter has lubricanting System so it is also suitable for long time working.
3. Big model of wood pelleter can press hard wood, rice husk, palm fiber and so without any bond to pellet with high density.
4. Double layer ring die has long lifetime so that we can save cost greatly.
Technical parameter:
Model
Power (KW)
capacity (T/H)
Weight (T)
diameter of pellets (mm)
XGJ450
55
0.6-1.0
4.5
Φ4-12
XGJ550
75
0.8-1.5
6.04
Φ4-12
XGJ560
90
1.2-1.8
6.1
Φ4-12
XGJ580
160
1.5-2.5
7
Φ4-12
XGJ850
220
2.5-3.5
14.5
Φ4-12
XGJ880
315
3.5-5.0
18
Φ4-12
XGJ1050
360-450
5.0-8.0
Φ4-30
XGJ1250
550-660
8.0-12.0
Φ4-30
Greatlywelcome to contact me for details
Wendy wang
MP.: 0086-18678866202
Fax: 0086-531-8348337
Yellowish Brown Hybrid Pennisetum Grass Seed Fuel Plant
1.high yield
2.high contents of lignin and cellulose of their biomass
3.carbon content is very high
4.perennial grass
Yellowish Brown Hybrid Pennisetum Grass Seed Fuel Plant
1.high yield
2.high contents of lignin and cellulose of their biomass
3.carbon content is very high
4.perennial grass
Perennial grasses as energy plants
Green plant catches about 0.024% solar energy,it is light energy converter. Green plants through photosynthesis,
converting solar energy into chemical energy in plants, namely the plant biomass, it is considered to be only second to
coal, oil, natural gas as the fourth energy.
Plant energy has many advantages:
First, it can regenerate,It can achieve sustained and stable supply as long as the proper management;
Second,it is widely distributed, the plants on earth energy distribution scope than fossil energy distribution range;
Third, contrast to the mineral sources,there is no pollution.
The fourth, it is to make full use of land, there are many plant energy production base as barren ground, abandoned
farmland and undeveloped land,.
Plant energy has many advantages
:
It can regenerate, as long as the proper management can achieve
sustained and stable supply; two is widely distributed, the plants on earth energy distribution scope than
fossil energy distribution range; three there is no pollution, which is associated with the mineral the sources
of energy in contrast; the four is to make full use of land, barren ground, abandoned farmland and
undeveloped land, these are the plant energy production base.
Characters of perennial grass
Perennial grasses as an energy plant is characterized in that they have high growth yield and its raw mater
ial, the cell wall is rich in lignin, cellulose and hemicellulose, this is as essential to the basic conditions of
energy plant. Especially when they are used as Solid biofuels is even more so.
There are two main reasons: first, they have high calorific value, the lignin in the carbon content is very high ( 64%);
second, strongly lignified plants in low moisture conditions can still maintain an upright. Therefore, the biomass of
perennial grasses with low moisture content, even in the stalk harvest can not dry, but delayed harvest
also can improve the biomass quality. In addition, the biomass of perennial grasses, lignin and cellulose
content was higher than annual plants.
Production and utilization of perennial grasses and many ecological benefits.
First of all, using its biomass instead of fossil fuel can reduce the CO2 emission; secondly, compared with
other biomass resources, such as woody plants and C3, C4 grasses can provide more than 2 times the
annual biomass yield, because they have more effective photosynthetic pathway and stronger CO2 fixation
capacity. Compared with annual plants, perennial grasses on soil tillage farming need only in those days,
do not need long term on the soil tillage system also reduces the risk of soil erosion, increase soil carbon
content. But, because of nutrients through the root system of circulation, thus perennial grasses on
nutrient input requirements of very low . Because of their natural pest less, and thus requires few or
the need for pesticides. In this case, it is possible to reduce the interference of the soil, coupled with
the late winter or early spring on grass harvest, and without the use of pesticides, can lead to different
species of perennial grasses in the group, especially birds, mammals and insects in number and activity
capacity increased .
2.high contents of lignin and cellulose of their biomass
3.carbon content is very high
4.perennial grass
Yellowish Brown Hybrid Pennisetum Grass Seed Fuel Plant
1.high yield
2.high contents of lignin and cellulose of their biomass
3.carbon content is very high
4.perennial grass
Perennial grasses as energy plants
Green plant catches about 0.024% solar energy,it is light energy converter. Green plants through photosynthesis,
converting solar energy into chemical energy in plants, namely the plant biomass, it is considered to be only second to
coal, oil, natural gas as the fourth energy.
Plant energy has many advantages:
First, it can regenerate,It can achieve sustained and stable supply as long as the proper management;
Second,it is widely distributed, the plants on earth energy distribution scope than fossil energy distribution range;
Third, contrast to the mineral sources,there is no pollution.
The fourth, it is to make full use of land, there are many plant energy production base as barren ground, abandoned
farmland and undeveloped land,.
Plant energy has many advantages
:
It can regenerate, as long as the proper management can achieve
sustained and stable supply; two is widely distributed, the plants on earth energy distribution scope than
fossil energy distribution range; three there is no pollution, which is associated with the mineral the sources
of energy in contrast; the four is to make full use of land, barren ground, abandoned farmland and
undeveloped land, these are the plant energy production base.
Characters of perennial grass
Perennial grasses as an energy plant is characterized in that they have high growth yield and its raw mater
ial, the cell wall is rich in lignin, cellulose and hemicellulose, this is as essential to the basic conditions of
energy plant. Especially when they are used as Solid biofuels is even more so.
There are two main reasons: first, they have high calorific value, the lignin in the carbon content is very high ( 64%);
second, strongly lignified plants in low moisture conditions can still maintain an upright. Therefore, the biomass of
perennial grasses with low moisture content, even in the stalk harvest can not dry, but delayed harvest
also can improve the biomass quality. In addition, the biomass of perennial grasses, lignin and cellulose
content was higher than annual plants.
Production and utilization of perennial grasses and many ecological benefits.
First of all, using its biomass instead of fossil fuel can reduce the CO2 emission; secondly, compared with
other biomass resources, such as woody plants and C3, C4 grasses can provide more than 2 times the
annual biomass yield, because they have more effective photosynthetic pathway and stronger CO2 fixation
capacity. Compared with annual plants, perennial grasses on soil tillage farming need only in those days,
do not need long term on the soil tillage system also reduces the risk of soil erosion, increase soil carbon
content. But, because of nutrients through the root system of circulation, thus perennial grasses on
nutrient input requirements of very low . Because of their natural pest less, and thus requires few or
the need for pesticides. In this case, it is possible to reduce the interference of the soil, coupled with
the late winter or early spring on grass harvest, and without the use of pesticides, can lead to different
species of perennial grasses in the group, especially birds, mammals and insects in number and activity
capacity increased .
Thursday, May 5, 2011
Yulong High capacity wood chipper machine
Yulong Wood chipper machine
1.CE,SGS, chipper machine
2.chipping wood logs to 10-30mm wood pieces
3.chips capacity:12-15 T/H
Yulong wood chipper machine introduction
Yulong GX series wood chipper machine are extremely robust machines with modern design, suitable for the chipping of round logs, waste wood, bamboo, slabs, planks, log end pieces, etc.
the feed-in materials are turned into high quality, uniform, and multi-application wood chips.The chips are suited as fuel for high intensity burning in modern heating plants. With continuous and economical working procedure, low maintenance costs, high efficiency and high capacity, our wood chipper machine had been trusted and praised since they were put on the market.
Yulong wood chipper machine
Model
Main Power (KW)
Capacity (T)
Max Feeder Size (mm)
Chips size (mm)
Weight (KG)
External Dimensions (mm)
GX215
45
3.0-4.0
160*400
30
2990
1470*1550*970
GX216
55
7.0-8.0
230*500
30
4070
1800*1900*1210
GX218
110
12.0-15.0
300*680
30
7000
2200*2150*1500
GX2113
200-250
15.0-30.0
450*800
30
11840
3670*2517*2050
If you are interested in Yulong wood chipper machine, please do not hesitate to contact us!
Best regards
Wendy wang
Tel: 0086-531-83483996
MP.: 0086-18678866202
Fax: 0086-531-83483378
1.CE,SGS, chipper machine
2.chipping wood logs to 10-30mm wood pieces
3.chips capacity:12-15 T/H
Yulong wood chipper machine introduction
Yulong GX series wood chipper machine are extremely robust machines with modern design, suitable for the chipping of round logs, waste wood, bamboo, slabs, planks, log end pieces, etc.
the feed-in materials are turned into high quality, uniform, and multi-application wood chips.The chips are suited as fuel for high intensity burning in modern heating plants. With continuous and economical working procedure, low maintenance costs, high efficiency and high capacity, our wood chipper machine had been trusted and praised since they were put on the market.
Yulong wood chipper machine
Model
Main Power (KW)
Capacity (T)
Max Feeder Size (mm)
Chips size (mm)
Weight (KG)
External Dimensions (mm)
GX215
45
3.0-4.0
160*400
30
2990
1470*1550*970
GX216
55
7.0-8.0
230*500
30
4070
1800*1900*1210
GX218
110
12.0-15.0
300*680
30
7000
2200*2150*1500
GX2113
200-250
15.0-30.0
450*800
30
11840
3670*2517*2050
If you are interested in Yulong wood chipper machine, please do not hesitate to contact us!
Best regards
Wendy wang
Tel: 0086-531-83483996
MP.: 0086-18678866202
Fax: 0086-531-83483378
ZBJ Advanced Charcoal Briquetting Machine High Capacity
Charcoal Briquetting Machine:
1.High production, High quality
2.Long durablity
3.Easy to operate
4.Stable performance
Charcoal Briquetting Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
Pictures of Loading
briquette forming machine,biomass briquette machine,charcoal briquette machine
1.High production, High quality
2.Long durablity
3.Easy to operate
4.Stable performance
Charcoal Briquetting Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
Pictures of Loading
briquette forming machine,biomass briquette machine,charcoal briquette machine
ZBJ charcoal briquette machine/ charcoal briquette press
briquette press machine
1.High capacity
2.High profit and low cost
3.Environment friendly
4.compact and durable
Briquette Press Machine
Introduction:
ZBJ (series) Briquettes machine is used to make sawdust, sugar cane, rice straw, rice stalk, corn stalk, cotton stalk, bean husk, into half-charcoal stick. The product of this machine can be used to heat boiler, fireplace,etc for warim in house.
The length of the finished product can be controlled and changed according to your requirement.
Features: High capacity, Low energy consumption, Compact and durable. Many performance data such as capacity, wood briquettes density, electricity consumption and wearable degree has reached advanced level.
It can be used as charcoal powder briquette machine by replacement of some spare parts. The out diameter of finished briquettes is 40-90mm.
Main Data:
Model
ZBJ-50
ZBJ-80
Capacity(kg/h)
120-180kg/h
250-350kg/h
Diameter of final product(mm)
40mm,50mm,60mm
70mm,80mm,90mm
Motor Power(kw)
15kw
18.5kw
Weight(kg)
600kg
800kg
Dimension(mm)
1600*620*1350mm
1700×800×1600mm
Note
:
Delivery time
: In 15 days after receiving 30% prepayment.
Payment term
: T/T 30% is deposit; the balance is paid after receiving the copy of the original B/L.
1.High capacity
2.High profit and low cost
3.Environment friendly
4.compact and durable
Briquette Press Machine
Introduction:
ZBJ (series) Briquettes machine is used to make sawdust, sugar cane, rice straw, rice stalk, corn stalk, cotton stalk, bean husk, into half-charcoal stick. The product of this machine can be used to heat boiler, fireplace,etc for warim in house.
The length of the finished product can be controlled and changed according to your requirement.
Features: High capacity, Low energy consumption, Compact and durable. Many performance data such as capacity, wood briquettes density, electricity consumption and wearable degree has reached advanced level.
It can be used as charcoal powder briquette machine by replacement of some spare parts. The out diameter of finished briquettes is 40-90mm.
Main Data:
Model
ZBJ-50
ZBJ-80
Capacity(kg/h)
120-180kg/h
250-350kg/h
Diameter of final product(mm)
40mm,50mm,60mm
70mm,80mm,90mm
Motor Power(kw)
15kw
18.5kw
Weight(kg)
600kg
800kg
Dimension(mm)
1600*620*1350mm
1700×800×1600mm
Note
:
Delivery time
: In 15 days after receiving 30% prepayment.
Payment term
: T/T 30% is deposit; the balance is paid after receiving the copy of the original B/L.
ZBJ series sawdust briquette machine made in China
ZBJ series sawdust briquette machine made in China
1.CE Certification
2.Hot sale in Europe
3.High quality
ZBJ series sawdust briquette machine made in China
Sawdust Briquette Machine can make stick shape wood briquette of different diameter and different shape from agro-forest wasted
Prospect of Briquette Machine:
Due to the rapid increase in the need of energy source, more people start to become interested in Biomass Briquette business. Biomass Briquette are Renewable, Eco-friendly Energy especially for agricultural countries.
Biomass Briquette investment is a best project to generate revenue from agro-forestry waste and to produce Green Energy to protect the global environment. The awareness of using Eco-friendly & Non-conventional Bio-coal / Bio-fuel is increasing day-to-day due to the increasing of the conventional fuel cost
This plant can make stick shape wood briquette of different diameter and different shape from biomass and agro-forest waste.
Raw Material to make Biomass Briquette Machine:
Any type of Agro-Forestry waste can be used. But the Moisture Content Should be Less than 12%, grain size is below 5×5mm.
Groundnut-shell Sugarcane residue Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Rice Husks Forestry wastes Wood Chips and many other Agro wastes.
Biomass Briquette Machine:
This Biomass Briquette Screw Press equipped with automatic temperature control system are designed to produce high density wood briquette from biomass. The motor can be 11kw/15kw/18.5kw-3phase-380v-50hz electrical driven motor. This machine can be operated 16 hours per day. The extruded wood briquette can be used as fuel for briquette boilers or boilers for heating. Please note: during briquetting process, there will be some smoke from the briquette machine that have to be expel to atmosphere.
1.CE Certification
2.Hot sale in Europe
3.High quality
ZBJ series sawdust briquette machine made in China
Sawdust Briquette Machine can make stick shape wood briquette of different diameter and different shape from agro-forest wasted
Prospect of Briquette Machine:
Due to the rapid increase in the need of energy source, more people start to become interested in Biomass Briquette business. Biomass Briquette are Renewable, Eco-friendly Energy especially for agricultural countries.
Biomass Briquette investment is a best project to generate revenue from agro-forestry waste and to produce Green Energy to protect the global environment. The awareness of using Eco-friendly & Non-conventional Bio-coal / Bio-fuel is increasing day-to-day due to the increasing of the conventional fuel cost
This plant can make stick shape wood briquette of different diameter and different shape from biomass and agro-forest waste.
Raw Material to make Biomass Briquette Machine:
Any type of Agro-Forestry waste can be used. But the Moisture Content Should be Less than 12%, grain size is below 5×5mm.
Groundnut-shell Sugarcane residue Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Rice Husks Forestry wastes Wood Chips and many other Agro wastes.
Biomass Briquette Machine:
This Biomass Briquette Screw Press equipped with automatic temperature control system are designed to produce high density wood briquette from biomass. The motor can be 11kw/15kw/18.5kw-3phase-380v-50hz electrical driven motor. This machine can be operated 16 hours per day. The extruded wood briquette can be used as fuel for briquette boilers or boilers for heating. Please note: during briquetting process, there will be some smoke from the briquette machine that have to be expel to atmosphere.
ZBJ series sawdust briquette machine
ZBJ series sawdust briquette machine
1.CE Certification
2.Hot sale in Europe
3.High quality
ZBJ series sawdust briquette machine
Sawdust Briquette Machine can make stick shape wood briquette of different diameter and different shape from agro-forest wasted
Prospect of Briquette Machine:
Due to the rapid increase in the need of energy source, more people start to become interested in Biomass Briquette business. Biomass Briquette are Renewable, Eco-friendly Energy especially for agricultural countries.
Biomass Briquette investment is a best project to generate revenue from agro-forestry waste and to produce Green Energy to protect the global environment. The awareness of using Eco-friendly & Non-conventional Bio-coal / Bio-fuel is increasing day-to-day due to the increasing of the conventional fuel cost
This plant can make stick shape wood briquette of different diameter and different shape from biomass and agro-forest waste.
Raw Material to make Biomass Briquette Machine:
Any type of Agro-Forestry waste can be used. But the Moisture Content Should be Less than 12%, grain size is below 5×5mm.
Groundnut-shell Sugarcane residue Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Rice Husks Forestry wastes Wood Chips and many other Agro wastes.
Biomass Briquette Machine:
This Biomass Briquette Screw Press equipped with automatic temperature control system are designed to produce high density wood briquette from biomass. The motor can be 11kw/15kw/18.5kw-3phase-380v-50hz electrical driven motor. This machine can be operated 16 hours per day. The extruded wood briquette can be used as fuel for briquette boilers or boilers for heating. Please note: during briquetting process, there will be some smoke from the briquette machine that have to be expel to atmosphere.
1.CE Certification
2.Hot sale in Europe
3.High quality
ZBJ series sawdust briquette machine
Sawdust Briquette Machine can make stick shape wood briquette of different diameter and different shape from agro-forest wasted
Prospect of Briquette Machine:
Due to the rapid increase in the need of energy source, more people start to become interested in Biomass Briquette business. Biomass Briquette are Renewable, Eco-friendly Energy especially for agricultural countries.
Biomass Briquette investment is a best project to generate revenue from agro-forestry waste and to produce Green Energy to protect the global environment. The awareness of using Eco-friendly & Non-conventional Bio-coal / Bio-fuel is increasing day-to-day due to the increasing of the conventional fuel cost
This plant can make stick shape wood briquette of different diameter and different shape from biomass and agro-forest waste.
Raw Material to make Biomass Briquette Machine:
Any type of Agro-Forestry waste can be used. But the Moisture Content Should be Less than 12%, grain size is below 5×5mm.
Groundnut-shell Sugarcane residue Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Rice Husks Forestry wastes Wood Chips and many other Agro wastes.
Biomass Briquette Machine:
This Biomass Briquette Screw Press equipped with automatic temperature control system are designed to produce high density wood briquette from biomass. The motor can be 11kw/15kw/18.5kw-3phase-380v-50hz electrical driven motor. This machine can be operated 16 hours per day. The extruded wood briquette can be used as fuel for briquette boilers or boilers for heating. Please note: during briquetting process, there will be some smoke from the briquette machine that have to be expel to atmosphere.
Subscribe to:
Posts (Atom)