1,Automatic start with electricity for convenient use
2,American first rank brand, Copeland compressor is used to guarantee
Floor Warming Facility
Characteristic:
The water temperature can be settled freely with wide using scale which can be flexibly applied to various kinds of engineer.
Depend on different occasion using requirement, the water temperature can be settled freely with the scale of 30~60°C which has greatly expanding the using scope.
Automatic start with electricity for convenient use
The running state can be recorded by the facility even if it is cut off during operation, and it shall automatically return to the previous status.
Scroll compressor with high efficiency, little vibration and is easy for repair,the operation risk is very low.
American first rank brand, Copeland compressor is used to guarantee high efficiency operation and static of the facility.
Multi-protection,much safer
The system is equipped with high and low pressure protection, compressor over flow and over load protection, exhaust temperature protection, start up time delay, water flow protection and phase sequence protection.
Evaporator area expanding design which guarantees COP under low temperature environment
Easy for control, one key is enough.
For adjustment and enactment, you only need to click the button on the wire controller.
Application,Can be used in schools, residential area, hotels, hospitals, bathing centers, hairdressing centers, swimming pools, collective dormitories, factories and breed aquatics areas.
Code
SKR-80W/X
SKR-100W/X
SKR-140W/X
SKR-140W/XS
Rated Heating Capacity
W
8000
10000
14000
14000
BTU
27000
34000
48000
48000
Power Supply
V/PH/HZ
220V/1/50HZ
380V/3/50HZ
Input Power
KW
2.63
3
4.6
4.6
Running Current
A
11.9
13.6
20
7.8
Hot Water Produced Volume
L/h
210
280
350
350
Thermostat Factory Setting
°C
55
Thermostat Maximum Setting
°C
60
Water Connections
mm/inch
1″
1″
1″
1″
Compressor Quantity
1
1
1
1
Water pump quantity
no
Fan Motor Quantity
1
1
2
1″
Fan Motor Input
W
90
90
90×2
180
Fan speed
RPM
950
950
950
950
Noise
dB(A)
58
58
62
62
Unit Dimension
L
mm
1110
1110
1110
745
W
470
470
470
745
H
680
930
1240
1100
Packing Dimension
L
mm
1165
1165
1165
850
W
485
485
485
850
H
780
1030
1340
1300
Weight
Net weight
kg
99
116
139
160
Gross weight
104
121
144
180
Measuring Conditions
Ambient Temperature
Water Inlet/Outlet Temperature
Dry Bulb Temp.
Wet Bulb Temp.
Water Inlet Temp.
Water Outlet Temp.
20°C
15°C
40°C
45°C
Saturday, August 27, 2011
Fluid Loss Hydrolyzed Polyacrylonitrile sodium salt Na-HPAN
Hydrolyzed Polyacrylonitrile sodium salt Na-HPAN
Na-HPAN,Filtration reducer
water-based drilling fluid
Introduction
Na-HPAN is copolymer of several polymers such as acrylamide and sodium acrylate acrylonitrile.
Na-HPAN, hydrolysis product of polyacrylonitrile add sodium hydroxide, is yellowish powder, soluble in water, and its solution is alkalescent, used for water-based drilling fluid loss with some role of viscosifier; In freshwater drilling fluid system, anti-scar can reach 250°C and is stable.
Specification
Appearance, Free-flowing powder or granules
Loss on drying, ≤10.0%
Screen margin, ≤5.0%
Residue on ignition, ≤3.0%
Ammonium, ≥5.5%
Performance of drilling fluid
Item
Index
Freshwater system
Salt water system
Base mud
Apparent viscosity, mPa.s
≤8.0
≤10.0
Filtration, mL
18.0-25.0
55.0-65.0
Base mud+Na-HPAN
Apparent viscosity, mPa.s
≤8.0
≤10.0
Reduced filtration rate,%
≥45.0
≥50.0
Please feel free to contact me on more information.
Thanks & Best regards,
Bob Zhang (Mr.)
Contact:bob at hnkingway dot com
Henan Kingway Chemicals Co., Ltd.
Na-HPAN,Filtration reducer
water-based drilling fluid
Introduction
Na-HPAN is copolymer of several polymers such as acrylamide and sodium acrylate acrylonitrile.
Na-HPAN, hydrolysis product of polyacrylonitrile add sodium hydroxide, is yellowish powder, soluble in water, and its solution is alkalescent, used for water-based drilling fluid loss with some role of viscosifier; In freshwater drilling fluid system, anti-scar can reach 250°C and is stable.
Specification
Appearance, Free-flowing powder or granules
Loss on drying, ≤10.0%
Screen margin, ≤5.0%
Residue on ignition, ≤3.0%
Ammonium, ≥5.5%
Performance of drilling fluid
Item
Index
Freshwater system
Salt water system
Base mud
Apparent viscosity, mPa.s
≤8.0
≤10.0
Filtration, mL
18.0-25.0
55.0-65.0
Base mud+Na-HPAN
Apparent viscosity, mPa.s
≤8.0
≤10.0
Reduced filtration rate,%
≥45.0
≥50.0
Please feel free to contact me on more information.
Thanks & Best regards,
Bob Zhang (Mr.)
Contact:bob at hnkingway dot com
Henan Kingway Chemicals Co., Ltd.
Fluid loss additive for oil well cement
Fluid loss additive
Compatible with API cement class
Resistant to high temperature
100% Water-Solubility
Introduction
KWJ-101L is suitable for wide temperature range and resistant to high temperature.
KWJ-101L has better rheological behavior and generally doesn’t require adding dispersant.
KWJ-101L is stable and has little free liquid.
KWJ-101L, being not retarded, has no effect on strength.
KWJ-101L is compatible with all API cement class, other additives and all types of water. What’s more, it is compatible with sea water and saline water. When KWJ-101L is used in saline water, should increase the dosage.
Attention:
KWJ-101L is only suitable for water-mixed only.
Specification
Appearance, Yellowish viscous liquid
Density, g/cm3, 1.05-1.15
Water-Solubility, 100%
Freezing point, deg C, -5(slightly anti-freezing type), -15 (anti-freezing type)
Performances of slurry
Item
Test Result
Test condition
Fluid loss content,ml
≤80
176F(80°C),6.9MPa
Thickening time,min
≥60
176F(80°C),45min,46.5MPa
Initial consistency,Bc
≤25
Compressive strength, MPa
≥14
176F(80°C), 1atm,24hr.
Free liquid,ml
≤1.5
176F(80°C), 1atm
Composition,API CLASS G(HSR):700g,mixed water: 308g,KWJ-101L: 12.6g(1.8%),KWH-201L:1g
Please feel free to contact me on more information.
Thanks & Best regards,
Bob Zhang (Mr.)
Contact:bob at hnkingway dot com
Henan Kingway Chemicals Co., Ltd.
Compatible with API cement class
Resistant to high temperature
100% Water-Solubility
Introduction
KWJ-101L is suitable for wide temperature range and resistant to high temperature.
KWJ-101L has better rheological behavior and generally doesn’t require adding dispersant.
KWJ-101L is stable and has little free liquid.
KWJ-101L, being not retarded, has no effect on strength.
KWJ-101L is compatible with all API cement class, other additives and all types of water. What’s more, it is compatible with sea water and saline water. When KWJ-101L is used in saline water, should increase the dosage.
Attention:
KWJ-101L is only suitable for water-mixed only.
Specification
Appearance, Yellowish viscous liquid
Density, g/cm3, 1.05-1.15
Water-Solubility, 100%
Freezing point, deg C, -5(slightly anti-freezing type), -15 (anti-freezing type)
Performances of slurry
Item
Test Result
Test condition
Fluid loss content,ml
≤80
176F(80°C),6.9MPa
Thickening time,min
≥60
176F(80°C),45min,46.5MPa
Initial consistency,Bc
≤25
Compressive strength, MPa
≥14
176F(80°C), 1atm,24hr.
Free liquid,ml
≤1.5
176F(80°C), 1atm
Composition,API CLASS G(HSR):700g,mixed water: 308g,KWJ-101L: 12.6g(1.8%),KWH-201L:1g
Please feel free to contact me on more information.
Thanks & Best regards,
Bob Zhang (Mr.)
Contact:bob at hnkingway dot com
Henan Kingway Chemicals Co., Ltd.
Fluid loss additive
Fluid-loss additive for oil well cement
Temperature range: 50-120deg C
Dosage: 0.4~1.5% (BWOC)
Properties
Appearance: brown powder
Odor: Odorless
Temperature range: 50-120°C
Dosage: 0.4~1.5% (BWOC)
Validity: 3 years
Technical index
Item
Technical index
Initial consistency,Bc
≤30
Shape of thickening-time curve
Normal
Transition time from 40Bc to 100Bc,min
≤40
Fluid loss,ml(75°C,6.9MPa,30min)
≤150
Free fluid,%
≤1.4
Compressive strength,MPa(75°C,20.7MPa,24h)
≥14
Composition: API Class G cement(HSR):792g, distilled water:349g,KWJ-111S:9.5g, KWJZ-1:4g.
Please feel free to contact me on more information.
Thanks & Best regards,
Bob Zhang (Mr.)
Contact:bob at hnkingway dot com
Henan Kingway Chemicals Co., Ltd.
Temperature range: 50-120deg C
Dosage: 0.4~1.5% (BWOC)
Properties
Appearance: brown powder
Odor: Odorless
Temperature range: 50-120°C
Dosage: 0.4~1.5% (BWOC)
Validity: 3 years
Technical index
Item
Technical index
Initial consistency,Bc
≤30
Shape of thickening-time curve
Normal
Transition time from 40Bc to 100Bc,min
≤40
Fluid loss,ml(75°C,6.9MPa,30min)
≤150
Free fluid,%
≤1.4
Compressive strength,MPa(75°C,20.7MPa,24h)
≥14
Composition: API Class G cement(HSR):792g, distilled water:349g,KWJ-111S:9.5g, KWJZ-1:4g.
Please feel free to contact me on more information.
Thanks & Best regards,
Bob Zhang (Mr.)
Contact:bob at hnkingway dot com
Henan Kingway Chemicals Co., Ltd.
Fluorite dust ball press Briquette machine
Fluorite dust ball press Briquette machine
1)high density,high strength,high hardness
2)high ball rate
3)low consumption
Fluorite dust ball press Briquette machine technical parameter
Model
Reducer
Ratio
Roller size
Spindle speed
Motor power
power
Yield
Bearing assembly
Size(m)
YHQ500-4
ZQ400
1:31.5
Φ500*350
15-17 r/min
Y180L-4
22kw
8-10 T/H
3516*4, CUP206*4
2.61*1.75*2.35
1)high density,high strength,high hardness
2)high ball rate
3)low consumption
Fluorite dust ball press Briquette machine technical parameter
Model
Reducer
Ratio
Roller size
Spindle speed
Motor power
power
Yield
Bearing assembly
Size(m)
YHQ500-4
ZQ400
1:31.5
Φ500*350
15-17 r/min
Y180L-4
22kw
8-10 T/H
3516*4, CUP206*4
2.61*1.75*2.35
Folding Biogas Tank
The soft biogas tank is made from reinforced PVC and red mud.
Producing technology:
Our biogas digesters are manufactured by sophisticated, high frequent and intelligent machine by means of welding with PVC that contains more than ten kinds of aging-resistant, cooroding-resistant, fire-resistant and strengthened special additives.
Quality assurance:
It is really like a bag, and bear high pressure. People can jump on it, when it is filled with air.(make sure your shoes are free of sharp things ). In China, we have it insured against its quality, which means you can get payment of 1000RMB from the insurance company, if any damage irreparable caused to the biogas digester within 5years. So its quality is really good.
DIY installation
Our biogas digester is really DIY installation. We will send you owner’s manual, drawings for building pit to hold biogas digester and installation video. With the help of them, you can definitely install the biogas digester on your won. It only takes about 2.5days to install 8CBM biogas digester. So you can do it on your own.
Producing technology:
Our biogas digesters are manufactured by sophisticated, high frequent and intelligent machine by means of welding with PVC that contains more than ten kinds of aging-resistant, cooroding-resistant, fire-resistant and strengthened special additives.
Quality assurance:
It is really like a bag, and bear high pressure. People can jump on it, when it is filled with air.(make sure your shoes are free of sharp things ). In China, we have it insured against its quality, which means you can get payment of 1000RMB from the insurance company, if any damage irreparable caused to the biogas digester within 5years. So its quality is really good.
DIY installation
Our biogas digester is really DIY installation. We will send you owner’s manual, drawings for building pit to hold biogas digester and installation video. With the help of them, you can definitely install the biogas digester on your won. It only takes about 2.5days to install 8CBM biogas digester. So you can do it on your own.
Food Carton Packaging Equipment
Food Carton Packaging Equipment:
carton erector
1.Speed:20ctns/min
2.Variable speed adjustment for carton forming and sealing
Food Carton Packaging Equipment:
carton erector
Model
JTK-03H20
JTK-03H30
Forming and sealing speed
20 cartons/min
30 cartons/min
Carton storage quantity
100pcs (100mm)
100pcs (100mm)
Carton size
L280-500xW150-350xH100-350mm
L280-500xW150-350xH100-350mm
Power requirements
750W (AC380V 3Phase)
1500W (AC380V 3Phase)
Air compressing
5-6kg/cm
2
5-6kg/cm
2
Air consumption
450NL/min
450NL/min
External size
L2,780 x W1,250 x H1,840
L2,780 x W1,250 x H1,840
Machine weight
800kgs
800kgs
Tape size
50 mm
50 mm
Precision designed and engineered by expertise. This carton erector has received approval from famous industries around the world. It is the highest speed carton forming and sealing machine.
Fully cam driven continuous system assures positive and stable motion with macimum stability.
In a breakthrough for tapping head design, this machine provides extremely secure sealing effect, outstanding tape smoothening performance, without tape slipping problems.
Accommodates all type of self-adhesive tapes.
Variable speed adjustment for carton forming and sealing. Reducing labor requirements.
Easy to operate and adjust. No damage on carton.
Horizontal cardboard stacking permits for supply of empty cardboard at any time.
Automatic indication for tape replacement or cardboard supply.
Main technical parameter:
carton erector
1.Speed:20ctns/min
2.Variable speed adjustment for carton forming and sealing
Food Carton Packaging Equipment:
carton erector
Model
JTK-03H20
JTK-03H30
Forming and sealing speed
20 cartons/min
30 cartons/min
Carton storage quantity
100pcs (100mm)
100pcs (100mm)
Carton size
L280-500xW150-350xH100-350mm
L280-500xW150-350xH100-350mm
Power requirements
750W (AC380V 3Phase)
1500W (AC380V 3Phase)
Air compressing
5-6kg/cm
2
5-6kg/cm
2
Air consumption
450NL/min
450NL/min
External size
L2,780 x W1,250 x H1,840
L2,780 x W1,250 x H1,840
Machine weight
800kgs
800kgs
Tape size
50 mm
50 mm
Precision designed and engineered by expertise. This carton erector has received approval from famous industries around the world. It is the highest speed carton forming and sealing machine.
Fully cam driven continuous system assures positive and stable motion with macimum stability.
In a breakthrough for tapping head design, this machine provides extremely secure sealing effect, outstanding tape smoothening performance, without tape slipping problems.
Accommodates all type of self-adhesive tapes.
Variable speed adjustment for carton forming and sealing. Reducing labor requirements.
Easy to operate and adjust. No damage on carton.
Horizontal cardboard stacking permits for supply of empty cardboard at any time.
Automatic indication for tape replacement or cardboard supply.
Main technical parameter:
Food Conveyor
Food Conveyor
1. Taiwan brand motor;
2. Professional design;
3. Reasonable price;
4. Easy to install;
Food Conveyor
1. Taiwan brand motor;
2. Professional design;
3. Reasonable price;
4. Easy to install;
5. Durable
Our company produces various automatic conveyors, such as assembly lines, packing
lines, belt conveyors, top-chain conveyors, slat conveyors, elevated conveyers(continuous and reciprocator), and roller conveyors (powered and without power),robot machines and hydraulic platforms.
Packing machine as follows:
Automatic carton sealer, case packer, automatic sealing machine, strapping machine,
accumulated packing machine, packing line, spiral wrapping machine for pallet,bottom sealing machine, case erector for hot melt and taper, automatic pick andplace packer, semi-automatic folding carton packer, automatic high speed casesealer, centre sealing machine, rotary capping machine, semi-automatic case sealer,high speed carton sealer.
We will try our best to supply the optimal conveyors for you.
1. Taiwan brand motor;
2. Professional design;
3. Reasonable price;
4. Easy to install;
Food Conveyor
1. Taiwan brand motor;
2. Professional design;
3. Reasonable price;
4. Easy to install;
5. Durable
Our company produces various automatic conveyors, such as assembly lines, packing
lines, belt conveyors, top-chain conveyors, slat conveyors, elevated conveyers(continuous and reciprocator), and roller conveyors (powered and without power),robot machines and hydraulic platforms.
Packing machine as follows:
Automatic carton sealer, case packer, automatic sealing machine, strapping machine,
accumulated packing machine, packing line, spiral wrapping machine for pallet,bottom sealing machine, case erector for hot melt and taper, automatic pick andplace packer, semi-automatic folding carton packer, automatic high speed casesealer, centre sealing machine, rotary capping machine, semi-automatic case sealer,high speed carton sealer.
We will try our best to supply the optimal conveyors for you.
Forestry Waste Charcoal Briquetting Machine Screw Type
Forestry Waste Charcoal Briquetting Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Charcoal Briquetting Machine Screw Type
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
1. Increase the net calorific value per unit volume after biomass briquetting
2. Easy to transport and store as densified product
3. Better solution to the problem of residue disposal
4. Uniform in size and quality as a kind of biofuel briquette
5. Reduce excess deforestation by providing a substitute for fuel wood
Biomass Briquette Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Charcoal Briquetting Machine Screw Type
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
1. Increase the net calorific value per unit volume after biomass briquetting
2. Easy to transport and store as densified product
3. Better solution to the problem of residue disposal
4. Uniform in size and quality as a kind of biofuel briquette
5. Reduce excess deforestation by providing a substitute for fuel wood
Biomass Briquette Machine:
1kw vertical wind turbine VAWT
vertical wind turbine :
1.low start-up wind speed
2.high ability of anti-wind
3.CE,ISO certified
4.no noise,maintenance-free
vertical wind turbine :
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Power
1kw
Rotor diameter
1.75m
Height of blades
1.8m
Break method
Electromagnetic brake
Material of blades
Glass Fiber Reinforced Plastic
Noise at 3 meter
<30dB
Upper weight(kg)
95
Number of blades
4
Rated rotor speed
200r/min
Rated wind speed
8m/s
Start-up wind speed
2m/s
Work wind speed
3-25m/s
Survival wind speed
40m/s
Output voltage(DC)
48V
Height of tower(advised)
6m
Output control system
charger control, inverter
Suggestion battery
12V150AH*4
the pictures of 1kw installed photos:
1.low start-up wind speed
2.high ability of anti-wind
3.CE,ISO certified
4.no noise,maintenance-free
vertical wind turbine :
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Power
1kw
Rotor diameter
1.75m
Height of blades
1.8m
Break method
Electromagnetic brake
Material of blades
Glass Fiber Reinforced Plastic
Noise at 3 meter
<30dB
Upper weight(kg)
95
Number of blades
4
Rated rotor speed
200r/min
Rated wind speed
8m/s
Start-up wind speed
2m/s
Work wind speed
3-25m/s
Survival wind speed
40m/s
Output voltage(DC)
48V
Height of tower(advised)
6m
Output control system
charger control, inverter
Suggestion battery
12V150AH*4
the pictures of 1kw installed photos:
Forged Steel Wind Mill Shaft
Forged Steel Wind Mill Shaft
1)6000T Pressure Machine
2)Different material avaible
3)Up to 60 Tons
4)Reasonable price+fast
Detailed Product Description:
SYI manufactures Wind Turbine Flanges & Shaft since 2001 and our monthly output is more than 3000 tons.
Product Information:
1), Sizes: Max. 5000mm for Flanges and Max. Dia. 1000mm & Length 15000mm for Shaft;
2), Material: S355NLZ25, 42CrMo etc.
3), Standard: As per the customers’ drawings;
4), Process: Ring Rolling, Forging;
5), Packing: steel pallets or as per customers' special requirement;
6), Delivery: usually within 5 weeks after receiving the formal order;
7), Inspection: factory in-house or Third Party inspection available upon request
More information is available upon receipt of your enquiry.
SYI Industrial Co., Ltd.
Tel: +0086-351-202 7764/+0086-351-419 2619
Fax: +0086-351-404 0962
Cell: +0086-138 3464 4819
You will get our quick reply!
Our aim is to provide all of our clients with value of the products instead of only low prices!
1)6000T Pressure Machine
2)Different material avaible
3)Up to 60 Tons
4)Reasonable price+fast
Detailed Product Description:
SYI manufactures Wind Turbine Flanges & Shaft since 2001 and our monthly output is more than 3000 tons.
Product Information:
1), Sizes: Max. 5000mm for Flanges and Max. Dia. 1000mm & Length 15000mm for Shaft;
2), Material: S355NLZ25, 42CrMo etc.
3), Standard: As per the customers’ drawings;
4), Process: Ring Rolling, Forging;
5), Packing: steel pallets or as per customers' special requirement;
6), Delivery: usually within 5 weeks after receiving the formal order;
7), Inspection: factory in-house or Third Party inspection available upon request
More information is available upon receipt of your enquiry.
SYI Industrial Co., Ltd.
Tel: +0086-351-202 7764/+0086-351-419 2619
Fax: +0086-351-404 0962
Cell: +0086-138 3464 4819
You will get our quick reply!
Our aim is to provide all of our clients with value of the products instead of only low prices!
Fortune Flower lamps
Energy saving lamps
Environmental protection
The life span is long
The external appearance is beautiful
1 Energy saving lamps
2 Lead adoption EU environmental protection standard mercuryL
3.ead an adoption 3environmental protection glass tube .Reduce the bane toward the human body,Attain ROHS thus standard.
4. Lead design EMC anti- interference the electromagnetism radiate circuit
5.Lead design increment to give out light area, make the ability effect promoted one class .Super longevity life breaks for 8000 hours.
6.The external appearance is beautiful and guide profession modern trend
Environmental protection
The life span is long
The external appearance is beautiful
1 Energy saving lamps
2 Lead adoption EU environmental protection standard mercuryL
3.ead an adoption 3environmental protection glass tube .Reduce the bane toward the human body,Attain ROHS thus standard.
4. Lead design EMC anti- interference the electromagnetism radiate circuit
5.Lead design increment to give out light area, make the ability effect promoted one class .Super longevity life breaks for 8000 hours.
6.The external appearance is beautiful and guide profession modern trend
Four Blades Vertical Wind Generator CTV-3KW
Vertical Wind Generator:
1.low start-up wind speed
2.safe,quiet and efficiency
3.low noise
4.install easily
Introduction of vertical wind generator:
We have already held several patents and acquire the CE Certification.
wind turbine can work at a very low wind speed, which will be more safe, quiet and efficient. It can be widely used in farm, top of the building ; can also installed in the mountain or the wasteland for a wind power station.
Main specifications:
Item
CTV-3KW
Rated power(w)
3000
Rotor diameter(m)
3.5
Blade length(m)
3.8
setup speed(m/s)
2.5
Rated speed(m/s)
10
working speed(m/s)
3-25
OUT DC off grid(v)
220
Baterry off grid
12V150AH*18
OUT DC on grid(v)
200-450
Height of tower
8
Generator Type
3 phase permanent magnet,direct driven
Charge controller
with Automatic Electrical Brake
Pure Sine Wave inverter
110/220/230v,50/60Hz
Pictures showing:
1.low start-up wind speed
2.safe,quiet and efficiency
3.low noise
4.install easily
Introduction of vertical wind generator:
We have already held several patents and acquire the CE Certification.
wind turbine can work at a very low wind speed, which will be more safe, quiet and efficient. It can be widely used in farm, top of the building ; can also installed in the mountain or the wasteland for a wind power station.
Main specifications:
Item
CTV-3KW
Rated power(w)
3000
Rotor diameter(m)
3.5
Blade length(m)
3.8
setup speed(m/s)
2.5
Rated speed(m/s)
10
working speed(m/s)
3-25
OUT DC off grid(v)
220
Baterry off grid
12V150AH*18
OUT DC on grid(v)
200-450
Height of tower
8
Generator Type
3 phase permanent magnet,direct driven
Charge controller
with Automatic Electrical Brake
Pure Sine Wave inverter
110/220/230v,50/60Hz
Pictures showing:
Four Roller Ball Press Machine
Four Roller Ball Press Machine
1,Low cost,high profit
2,Save work force and power
3,Easy to maitain and operate
Four Roller Ball Press Machine
1. model: YHQ400-4
2. Reducer: ZQ400
3. Ratio: 1:31.5
4. Roller size: Φ4000*250
5. Spindle speed: 15-17r/min
6. Motor Model: Y132M-4
7. Power: 11kw
8. Yield:4-7t/h
9. Bearing assembly: 3516*4, 3508*4, CUP206*4
10. Overall size(m):2.3*1.38*1.96
1,Low cost,high profit
2,Save work force and power
3,Easy to maitain and operate
Four Roller Ball Press Machine
1. model: YHQ400-4
2. Reducer: ZQ400
3. Ratio: 1:31.5
4. Roller size: Φ4000*250
5. Spindle speed: 15-17r/min
6. Motor Model: Y132M-4
7. Power: 11kw
8. Yield:4-7t/h
9. Bearing assembly: 3516*4, 3508*4, CUP206*4
10. Overall size(m):2.3*1.38*1.96
Four Rollers Double Pressing Ball Press Machine
ball press :
1.high tension
2.energy saving
3.fine wear resistance
4.Four Rollers Double Pressing
Zhong Zhou 2010 new model ball press Machine
It is applicable to make briquettes from coal powder,mineral powder and coke powder, lime powder with binder.
Partial list of materials presently being briquetted:
Coal
Coke
Anthracite
Ash
Iron Oxide
Iron concentrate
Metal powder
Iron powder
Dried Sewage Sludge
Steelwork dust
Manganese
Molybdenum
alumina Oxide
Magnesium Oxide
Refractories
Type
ZZXM-4
ZZXM-6
ZZXM-8
ZZXM-10
ZZXM-15
ZZXM-20
ZZXM-30
ZZXM-40
Hour Output
3-4 t/h
6 t/h
6 t/h
10 t/h
15 t/h
22 t/h
30 t/h
40 t/h
Annual Output
10thousand T
20thousand T
25thousand T
30thousand T
50thousand T
100thousand T
200thousand T
300thousand T
Roller Width
250mm
240mm
220mm
300mm
336mm
630mm
720mm
800mm
Roller Diameter
360mm
400mm
450mm
500mm
650mm
650mm
750mm
850mm
Power
7.5-11KW
11-15KW
15-18.5KW
18.5-30KW
22-45KW
30-55KW
55-90KW
90-130KW
Total Pressure
15
20r/min
30r/min
35r/min
45r/min
55r/min
70r/min
75r/min
1.high tension
2.energy saving
3.fine wear resistance
4.Four Rollers Double Pressing
Zhong Zhou 2010 new model ball press Machine
It is applicable to make briquettes from coal powder,mineral powder and coke powder, lime powder with binder.
Partial list of materials presently being briquetted:
Coal
Coke
Anthracite
Ash
Iron Oxide
Iron concentrate
Metal powder
Iron powder
Dried Sewage Sludge
Steelwork dust
Manganese
Molybdenum
alumina Oxide
Magnesium Oxide
Refractories
Type
ZZXM-4
ZZXM-6
ZZXM-8
ZZXM-10
ZZXM-15
ZZXM-20
ZZXM-30
ZZXM-40
Hour Output
3-4 t/h
6 t/h
6 t/h
10 t/h
15 t/h
22 t/h
30 t/h
40 t/h
Annual Output
10thousand T
20thousand T
25thousand T
30thousand T
50thousand T
100thousand T
200thousand T
300thousand T
Roller Width
250mm
240mm
220mm
300mm
336mm
630mm
720mm
800mm
Roller Diameter
360mm
400mm
450mm
500mm
650mm
650mm
750mm
850mm
Power
7.5-11KW
11-15KW
15-18.5KW
18.5-30KW
22-45KW
30-55KW
55-90KW
90-130KW
Total Pressure
15
20r/min
30r/min
35r/min
45r/min
55r/min
70r/min
75r/min
Four Rollers Double Pressing Ball Press Machine
ball press :
1.high tension
2.energy saving
3.fine wear resistance
4.Four Rollers Double Pressing
Zhong Zhou 2010 new model ball press Machine
It is applicable to make briquettes from coal powder,mineral powder and coke powder, lime powder with binder.
Partial list of materials presently being briquetted:
Coal
Coke
Anthracite
Ash
Iron Oxide
Iron concentrate
Metal powder
Iron powder
Dried Sewage Sludge
Steelwork dust
Manganese
Molybdenum
alumina Oxide
Magnesium Oxide
Refractories
Type
ZZXM-4
ZZXM-6
ZZXM-8
ZZXM-10
ZZXM-15
ZZXM-20
ZZXM-30
ZZXM-40
Hour Output
3-4 t/h
6 t/h
6 t/h
10 t/h
15 t/h
22 t/h
30 t/h
40 t/h
Annual Output
10thousand T
20thousand T
25thousand T
30thousand T
50thousand T
100thousand T
200thousand T
300thousand T
Roller Width
250mm
240mm
220mm
300mm
336mm
630mm
720mm
800mm
Roller Diameter
360mm
400mm
450mm
500mm
650mm
650mm
750mm
850mm
Power
7.5-11KW
11-15KW
15-18.5KW
18.5-30KW
22-45KW
30-55KW
55-90KW
90-130KW
Total Pressure
15
20r/min
30r/min
35r/min
45r/min
55r/min
70r/min
75r/min
1.high tension
2.energy saving
3.fine wear resistance
4.Four Rollers Double Pressing
Zhong Zhou 2010 new model ball press Machine
It is applicable to make briquettes from coal powder,mineral powder and coke powder, lime powder with binder.
Partial list of materials presently being briquetted:
Coal
Coke
Anthracite
Ash
Iron Oxide
Iron concentrate
Metal powder
Iron powder
Dried Sewage Sludge
Steelwork dust
Manganese
Molybdenum
alumina Oxide
Magnesium Oxide
Refractories
Type
ZZXM-4
ZZXM-6
ZZXM-8
ZZXM-10
ZZXM-15
ZZXM-20
ZZXM-30
ZZXM-40
Hour Output
3-4 t/h
6 t/h
6 t/h
10 t/h
15 t/h
22 t/h
30 t/h
40 t/h
Annual Output
10thousand T
20thousand T
25thousand T
30thousand T
50thousand T
100thousand T
200thousand T
300thousand T
Roller Width
250mm
240mm
220mm
300mm
336mm
630mm
720mm
800mm
Roller Diameter
360mm
400mm
450mm
500mm
650mm
650mm
750mm
850mm
Power
7.5-11KW
11-15KW
15-18.5KW
18.5-30KW
22-45KW
30-55KW
55-90KW
90-130KW
Total Pressure
15
20r/min
30r/min
35r/min
45r/min
55r/min
70r/min
75r/min
Four Rollers Double Pressing Briquette Machine
briquette pressing :
1.high tension
2.energy saving
3.fine wear resistance
4.Four Rollers Double Pressing
Zhong Zhou 2010 new model briquette pressing machine
It is applicable to make briquettes from coal powder,mineral powder and coke powder, lime powder with binder.
Partial list of materials presently being briquetted:
Coal
Coke
Anthracite
Ash
Iron Oxide
Iron concentrate
Metal powder
Iron powder
Dried Sewage Sludge
Steelwork dust
Manganese
Molybdenum
alumina Oxide
Magnesium Oxide
Refractories
Type
ZZXM-4
ZZXM-6
ZZXM-8
ZZXM-10
ZZXM-15
ZZXM-20
ZZXM-30
ZZXM-40
Hour Output
3-4 t/h
6 t/h
6 t/h
10 t/h
15 t/h
22 t/h
30 t/h
40 t/h
Annual Output
10thousand T
20thousand T
25thousand T
30thousand T
50thousand T
100thousand T
200thousand T
300thousand T
Roller Width
250mm
240mm
220mm
300mm
336mm
630mm
720mm
800mm
Roller Diameter
360mm
400mm
450mm
500mm
650mm
650mm
750mm
850mm
Power
7.5-11KW
11-15KW
15-18.5KW
18.5-30KW
22-45KW
30-55KW
55-90KW
90-130KW
Total Pressure
15
20r/min
30r/min
35r/min
45r/min
55r/min
70r/min
75r/min
1.high tension
2.energy saving
3.fine wear resistance
4.Four Rollers Double Pressing
Zhong Zhou 2010 new model briquette pressing machine
It is applicable to make briquettes from coal powder,mineral powder and coke powder, lime powder with binder.
Partial list of materials presently being briquetted:
Coal
Coke
Anthracite
Ash
Iron Oxide
Iron concentrate
Metal powder
Iron powder
Dried Sewage Sludge
Steelwork dust
Manganese
Molybdenum
alumina Oxide
Magnesium Oxide
Refractories
Type
ZZXM-4
ZZXM-6
ZZXM-8
ZZXM-10
ZZXM-15
ZZXM-20
ZZXM-30
ZZXM-40
Hour Output
3-4 t/h
6 t/h
6 t/h
10 t/h
15 t/h
22 t/h
30 t/h
40 t/h
Annual Output
10thousand T
20thousand T
25thousand T
30thousand T
50thousand T
100thousand T
200thousand T
300thousand T
Roller Width
250mm
240mm
220mm
300mm
336mm
630mm
720mm
800mm
Roller Diameter
360mm
400mm
450mm
500mm
650mm
650mm
750mm
850mm
Power
7.5-11KW
11-15KW
15-18.5KW
18.5-30KW
22-45KW
30-55KW
55-90KW
90-130KW
Total Pressure
15
20r/min
30r/min
35r/min
45r/min
55r/min
70r/min
75r/min
Four blade vertical windmill VAWT
vertical windmill:
1.ISO,CE certification
2.High generation efficiency
3.Simple installation
4.Low start-up wind speed
vertical windmill:
Product Name:off Grid Wind Turbine Generation 50W-5KW
Model No.:CTV-50W~5KW OFF GRID
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our VAWT:
Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
If you are interested in our VAWT, Please inform me anytime
1.ISO,CE certification
2.High generation efficiency
3.Simple installation
4.Low start-up wind speed
vertical windmill:
Product Name:off Grid Wind Turbine Generation 50W-5KW
Model No.:CTV-50W~5KW OFF GRID
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our VAWT:
Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
If you are interested in our VAWT, Please inform me anytime
Four blades vertical wind generator VAWT
vertical wind generator:
1.ISO,CE certification
2.High generation efficiency
3.Simple installation
4.Low start-up wind speed
vertical wind generator:
Product Name:off Grid Wind Turbine Generation 50W-5KW
Model No.:CTV-50W~5KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our VAWT:
Notes:
1.For the power curves and details,please feel free to contact me
2.Our CE EMC certification number:1826
3.If you are interested in our VAWT, Please inform us
1.ISO,CE certification
2.High generation efficiency
3.Simple installation
4.Low start-up wind speed
vertical wind generator:
Product Name:off Grid Wind Turbine Generation 50W-5KW
Model No.:CTV-50W~5KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our VAWT:
Notes:
1.For the power curves and details,please feel free to contact me
2.Our CE EMC certification number:1826
3.If you are interested in our VAWT, Please inform us
Four blades vertical wind generator for home
vertical wind generator:
1.Low start-up wind speed
2.Better quality, low noise
3.Safe,quiet,efficient
4.Own patent and CE
Vertical wind generator:
Product Name:off Grid Wind Turbine Generation 50W-5KW
Model No.:CTV-50W~5KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our VH type VAWT:
Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.If you are interested in our VAWT, Please inform me anytime
1.Low start-up wind speed
2.Better quality, low noise
3.Safe,quiet,efficient
4.Own patent and CE
Vertical wind generator:
Product Name:off Grid Wind Turbine Generation 50W-5KW
Model No.:CTV-50W~5KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our VH type VAWT:
Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.If you are interested in our VAWT, Please inform me anytime
1kw vertical wind turbine VAWT
vertical wind turbine VAWT:
1.Low start-up wind speed
2.Better quality, low noise
3.Safe,quiet,efficient
4.Own patent and CE
Vertical wind turbine VAWT:
Product Name:off Grid Wind Turbine Generation 50W-5KW
Model No.:CTV-50W~5KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our VAWT:
Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.If you are interested in our VAWT, Please inform me anytime
1.Low start-up wind speed
2.Better quality, low noise
3.Safe,quiet,efficient
4.Own patent and CE
Vertical wind turbine VAWT:
Product Name:off Grid Wind Turbine Generation 50W-5KW
Model No.:CTV-50W~5KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our VAWT:
Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.If you are interested in our VAWT, Please inform me anytime
Four blades vertical wind turbine for home
vertical wind turbine:
1.Low start-up wind speed
2.Better quality, low noise
3.Safe,quiet,efficient
4.Own patent and CE
vertical wind turbine:
Product Name:off Grid Wind Turbine Generation 50W-5KW
Model No.:CTV-50W~5KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our model:
Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.If you are interested in our VAWT, Please inform me anytime
1.Low start-up wind speed
2.Better quality, low noise
3.Safe,quiet,efficient
4.Own patent and CE
vertical wind turbine:
Product Name:off Grid Wind Turbine Generation 50W-5KW
Model No.:CTV-50W~5KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our model:
Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.If you are interested in our VAWT, Please inform me anytime
Four blades vertical wind turbine
vertical wind turbine :
1.low start-up wind speed
2.reliable quality
3.energy-saving
4.long service life
vertical wind turbine :
Product Name:off Grid Wind Turbine Generation 50W-3KW
Model No.:CTV-50W~3KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
Rated Power(W)
500
1000
2000
3000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
Setup Speed (m/s)
2
2.5
2.5
2.5
Rated Speed(m/s)
8
8
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
OUT DC off grid (V)
24
48
48
48
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×4
12V150AH×4
Height of Tower (m)
6
6
6
8
Upper Weight (kg)
67
95
188
217
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The pictures of our VAWT:
1.low start-up wind speed
2.reliable quality
3.energy-saving
4.long service life
vertical wind turbine :
Product Name:off Grid Wind Turbine Generation 50W-3KW
Model No.:CTV-50W~3KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
Rated Power(W)
500
1000
2000
3000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
Setup Speed (m/s)
2
2.5
2.5
2.5
Rated Speed(m/s)
8
8
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
OUT DC off grid (V)
24
48
48
48
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×4
12V150AH×4
Height of Tower (m)
6
6
6
8
Upper Weight (kg)
67
95
188
217
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The pictures of our VAWT:
Four blades wind generator VAWT
Four blades wind generator :
1.ISO,CE certification
2.High generation efficiency
3.Simple installation
4.Low start-up wind s
Four blades wind generator :
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Vertical Wind Turbine -- VH Model 500W to 5KW
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power (W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Blade Length (m)
1.5
1.8
2.6
3.8
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed (m/s)
8
8
10
10
10
Working Speed (m/s)
2.5–25
3–25
3–25
3–25
3.5–25
OUT DC off grid (v)
24
48
96
220
380
Battery off grid
12V150AH*2
12V150AH*4
12V150AH*8
12V150AH*18
12V150AH*30
OUT DC on grid (v)
\
150-450
200-450
200-450
200-780
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet,direct driven
Charge controller
with Automatic Electrical Brake
Pure Sine Wave Inverter
110/220/230V,50/60Hz
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our VAWT:
Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.If you are interested in our VAWT, Please inform me anytime
1.ISO,CE certification
2.High generation efficiency
3.Simple installation
4.Low start-up wind s
Four blades wind generator :
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Vertical Wind Turbine -- VH Model 500W to 5KW
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power (W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Blade Length (m)
1.5
1.8
2.6
3.8
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed (m/s)
8
8
10
10
10
Working Speed (m/s)
2.5–25
3–25
3–25
3–25
3.5–25
OUT DC off grid (v)
24
48
96
220
380
Battery off grid
12V150AH*2
12V150AH*4
12V150AH*8
12V150AH*18
12V150AH*30
OUT DC on grid (v)
\
150-450
200-450
200-450
200-780
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet,direct driven
Charge controller
with Automatic Electrical Brake
Pure Sine Wave Inverter
110/220/230V,50/60Hz
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our VAWT:
Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.If you are interested in our VAWT, Please inform me anytime
Four blades wind turbine VAWT
Vertical wind turbine:
1.Low start-up wind speed
2.Better quality, low noise
3.Safe,quiet,efficient
4.Own patent and CE
Vertical wind turbine:
Product Name:off Grid Wind Turbine Generation 50W-5KW
Model No.:CTV-50W~5KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our VAWT:
Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.If you are interested in our VAWT, Please inform me anytime
1.Low start-up wind speed
2.Better quality, low noise
3.Safe,quiet,efficient
4.Own patent and CE
Vertical wind turbine:
Product Name:off Grid Wind Turbine Generation 50W-5KW
Model No.:CTV-50W~5KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our VAWT:
Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.If you are interested in our VAWT, Please inform me anytime
Fracturing Blender
HSC300 Fracturing Blender is used to accurately blend and supply fluid laden sand to fracturing operations for land based.
·This unit is used to accurately blend and supply fluid laden sand to fracturing operations for land based.
·Its continuous automatic blending control system (FBS3.2) was independently developed by JEREH. It can be shifted from automatic control to manual control with little effort if desired.
·Such parameters as sand to fluid ratio, discharge rate, sand flow rate (instantaneous & accumulated), liquid chemical additive volume (instantaneous & accumulated) are all monitored, controlled and recorded to ensure proper operation.
·Main components are internationally known brands which guarantee reliable performance.
Model
HSC300
Chassis
KENWORTH 8×4
Deck Engine
DDC S60
Transfer Case
FUNK
Suction Centrifugal Pump
12×12
Discharge Centrifugal Pump
12×10
Auger
12″(dia)
Blender Tank Capacity
1.5 m
3
(400 gal)
Max. Sand Flow Rate
300 m
3
/h (392 yd
3
/h)
Max. Sand Density
2.4 g/cm
3
(20 lb/gal)
Max. Discharging Rate
16 m
3
/min (100 bbl/min)
Unit Weight
28,870 kg (63,647 lb)
Overall Dimensions(L×W×H)
13,480×2,600×4,100 mm (44.2×8.5×13.5 ft)
·This unit is used to accurately blend and supply fluid laden sand to fracturing operations for land based.
·Its continuous automatic blending control system (FBS3.2) was independently developed by JEREH. It can be shifted from automatic control to manual control with little effort if desired.
·Such parameters as sand to fluid ratio, discharge rate, sand flow rate (instantaneous & accumulated), liquid chemical additive volume (instantaneous & accumulated) are all monitored, controlled and recorded to ensure proper operation.
·Main components are internationally known brands which guarantee reliable performance.
Model
HSC300
Chassis
KENWORTH 8×4
Deck Engine
DDC S60
Transfer Case
FUNK
Suction Centrifugal Pump
12×12
Discharge Centrifugal Pump
12×10
Auger
12″(dia)
Blender Tank Capacity
1.5 m
3
(400 gal)
Max. Sand Flow Rate
300 m
3
/h (392 yd
3
/h)
Max. Sand Density
2.4 g/cm
3
(20 lb/gal)
Max. Discharging Rate
16 m
3
/min (100 bbl/min)
Unit Weight
28,870 kg (63,647 lb)
Overall Dimensions(L×W×H)
13,480×2,600×4,100 mm (44.2×8.5×13.5 ft)
Fracturing Blender
The truck mounted frac blender(fracturing blender) is mainly for the sand control and fracturing operation in land & desert.
·
HSC240 truck mounted fracturing blender
is mainly for the sand control and fracturing operation in land and desert. This sand blender is suitable to accurately blend, circulate and transport the sand glue liquid for the sand control operation.
·Equipped with Continued blending Automatic Mixing system developed by Jereh independently and realize the variable control, easy operation, high working efficiency and quickly changing the manual and automatic shifts .
·The main components, hydraulic parts and instruments are all imported products with high reliability. The operation panel is equipped with all kinds of instruments and control valve, which can realize the centralized control and easy operation.
·This
frac blender
(
fracturing blender
) will be capable of operating in ambient temperature ranges of -20°C-- +50°C and suitable for the requirement of driving in the off way and desert road.
·The microcomputer control system can realize the real-time monitoring, controlling and recording the sand ratio, discharging rate, capacity of conveying sand (instantaneous & accumulated), additive chemical liquid volume (instantaneous & accumulated), etc. All these assure the quality of job.
Chassis
North Benz 6×6
Engine
DDC S60
Transfer Case
TWIN
Suction centrifugal pump
10×8
Discharging centrifugal pump
10×8
Augers
12″
Volume of blender tank
9 bbl
Sand flowrate
1056 GPM
Max. density
20 PPG
Max. discharging rate
2509 GPM
Weight
23670 kg
Overall Dimension
11700×2500×4000 mm
·
HSC240 truck mounted fracturing blender
is mainly for the sand control and fracturing operation in land and desert. This sand blender is suitable to accurately blend, circulate and transport the sand glue liquid for the sand control operation.
·Equipped with Continued blending Automatic Mixing system developed by Jereh independently and realize the variable control, easy operation, high working efficiency and quickly changing the manual and automatic shifts .
·The main components, hydraulic parts and instruments are all imported products with high reliability. The operation panel is equipped with all kinds of instruments and control valve, which can realize the centralized control and easy operation.
·This
frac blender
(
fracturing blender
) will be capable of operating in ambient temperature ranges of -20°C-- +50°C and suitable for the requirement of driving in the off way and desert road.
·The microcomputer control system can realize the real-time monitoring, controlling and recording the sand ratio, discharging rate, capacity of conveying sand (instantaneous & accumulated), additive chemical liquid volume (instantaneous & accumulated), etc. All these assure the quality of job.
Chassis
North Benz 6×6
Engine
DDC S60
Transfer Case
TWIN
Suction centrifugal pump
10×8
Discharging centrifugal pump
10×8
Augers
12″
Volume of blender tank
9 bbl
Sand flowrate
1056 GPM
Max. density
20 PPG
Max. discharging rate
2509 GPM
Weight
23670 kg
Overall Dimension
11700×2500×4000 mm
Friday, August 26, 2011
Fracturing Blender
HSC240 truck mounted sand blender is mainly for the sand control and fracturing operation in land and desert.
HSC240 truck mounted sand blender is mainly for the sand control and fracturing operation in land and desert. This sand blender is suitable to accurately blend, circulate and transport the sand glue liquid for the sand control operation.
This sand blender will be capable of operating in ambient temperature ranges of -20-- +50 and suitable for the requirement of driving in the off way and desert road.
Equipped with Continued blending Automatic Mixing system developed by Jereh independently and realize the variable control, easy operation, high working efficiency and quickly changing the manual and automatic shifts .
The microcomputer control system can realize the real-time monitoring, controlling and recording the sand ratio, discharging rate, capacity of conveying sand (instantaneous & accumulated), additive chemical liquid volume (instantaneous & accumulated), etc. All these assure the quality of job.
The main components, hydraulic parts and instruments are all imported products with high reliability. The operation panel is equipped with all kinds of instruments and control valve, which can realize the centralized control and convenient operation.
Main technical data
Chassis Model
North Benz 6X6347bhp@1800rpm
Engine
DDC S60525bhp@2100rpm
Transfer Case
TWIN AM450
Hydraulic Pressure Cell:
SAUER DANFOSS
Augers:
12
Max. density
2.4g/cm3
Max. discharging rate
9.5 m3/min
Weight
35000 kg
Outer dimension
11500×2500×4000 mm
HSC240 truck mounted sand blender is mainly for the sand control and fracturing operation in land and desert. This sand blender is suitable to accurately blend, circulate and transport the sand glue liquid for the sand control operation.
This sand blender will be capable of operating in ambient temperature ranges of -20-- +50 and suitable for the requirement of driving in the off way and desert road.
Equipped with Continued blending Automatic Mixing system developed by Jereh independently and realize the variable control, easy operation, high working efficiency and quickly changing the manual and automatic shifts .
The microcomputer control system can realize the real-time monitoring, controlling and recording the sand ratio, discharging rate, capacity of conveying sand (instantaneous & accumulated), additive chemical liquid volume (instantaneous & accumulated), etc. All these assure the quality of job.
The main components, hydraulic parts and instruments are all imported products with high reliability. The operation panel is equipped with all kinds of instruments and control valve, which can realize the centralized control and convenient operation.
Main technical data
Chassis Model
North Benz 6X6347bhp@1800rpm
Engine
DDC S60525bhp@2100rpm
Transfer Case
TWIN AM450
Hydraulic Pressure Cell:
SAUER DANFOSS
Augers:
12
Max. density
2.4g/cm3
Max. discharging rate
9.5 m3/min
Weight
35000 kg
Outer dimension
11500×2500×4000 mm
Fracturing Unit
YLC65-1320 Truck Mounted Fracturing Unit is mainly used for fracturing job on the oilfield.
Brief Introduction
1. This
fracturing unit
is a new generation of fracturing equipment developed by Jereh independently with much experience of domestic and overseas manufacturing technology and mainly used to do fracturing job, etc.
2. This unit features good and reliable performance, reasonable layout, beautiful design, and convenient operation. It is the ideal option for fracturing job in onshore oilfield.
3. The unit is designed to work under ambient temperature between -30 to +40 degree and suitable for oilfield worksite and driving in desert and mountain road.
4. The main components and instruments are imported, which improve the performance and durability of the unit. The main components are truck chassis, deck engine, transmission, operation control case (remote and short range), and triplex plunger pump, etc.
l5. Two sets of remote operation control systems including portable remote operation control case, and the remote operation control case in the instrument van. The system can be connected through Ethernet and control several fracturing trucks.
6. The remote and short range operation control case can not only display operating parameters of the engine and transmission, but also the working parameters such as discharge pressure and discharge rate of the triplex plunger pump. The remote operation control system can display real time discharge pressure and discharge rate curves, and monitor real time operation of the equipment. All instruments are dustproof and vibration protected.
Main technical data
Chassis: Kenworth C500 8X6
Deck engine: CAT 3512B(2250bhp@1900rpm)
Deck transmission: Allison S9820
Triplex plunger pump: OFM2250(5.5” plunger)
Max working pressure: 65MPa
Max. working flow rate: 2.78m
3
/min(under pressure 28.5MPa)
Weight: 36000kg
Overall dimension: 11960X2500X4300
Brief Introduction
1. This
fracturing unit
is a new generation of fracturing equipment developed by Jereh independently with much experience of domestic and overseas manufacturing technology and mainly used to do fracturing job, etc.
2. This unit features good and reliable performance, reasonable layout, beautiful design, and convenient operation. It is the ideal option for fracturing job in onshore oilfield.
3. The unit is designed to work under ambient temperature between -30 to +40 degree and suitable for oilfield worksite and driving in desert and mountain road.
4. The main components and instruments are imported, which improve the performance and durability of the unit. The main components are truck chassis, deck engine, transmission, operation control case (remote and short range), and triplex plunger pump, etc.
l5. Two sets of remote operation control systems including portable remote operation control case, and the remote operation control case in the instrument van. The system can be connected through Ethernet and control several fracturing trucks.
6. The remote and short range operation control case can not only display operating parameters of the engine and transmission, but also the working parameters such as discharge pressure and discharge rate of the triplex plunger pump. The remote operation control system can display real time discharge pressure and discharge rate curves, and monitor real time operation of the equipment. All instruments are dustproof and vibration protected.
Main technical data
Chassis: Kenworth C500 8X6
Deck engine: CAT 3512B(2250bhp@1900rpm)
Deck transmission: Allison S9820
Triplex plunger pump: OFM2250(5.5” plunger)
Max working pressure: 65MPa
Max. working flow rate: 2.78m
3
/min(under pressure 28.5MPa)
Weight: 36000kg
Overall dimension: 11960X2500X4300
Fracturing Unit
The hydraulic output per unit is 2500hp with maximum working pressure is 140MPa (20,000 psi).
·This new generation of Frac pumping unit was independently developed by JEREH. The hydraulic output per unit is 2500hp with maximum working pressure is 140MPa (20,000 psi).
·The chassis is KENWORTH off-road truck dedicated to oilfield applications. The chassis design can be tailored to customer special needs based on deck configuration. The Smart Pump Control System (SPC2.2) was independently developed by JEREH and is capable of controlling 24 sets of Frac pumping units at the same time.
·The engine and transmission are controlled by J1939 which is an industry standard.
·Ethernet communication technology makes remote operation easy and reliable.
Chassis
KENWORTH 8×4 (Mercedes-Benz 8×6,optional)
Deck Engine
DDC 16V 4000 (3,000 bhp)
Deck Transmission
TWIN DISC 8FLW-2302 Torque Converter And TA90-8501 Mechanical Transmission
Quintuplex Plunger Pump
FMC WQ2700(4 in Plungers)or OFM2800 (3.75 in Plungers)
Max. Working Pressure
140 MPa (20,000 psi)
Rated Output Power
1,860 kW (2,500 hhp)
Max. Working Flow Rate
2.17 m
3
/min (pump pressure 50MPa)
or 2.81 m
3
/min (pump pressure 40MPa)
Unit Weight
44,870 kg ( 98,921 lb)
Overall Dimensions
12,500×2,590×4,100 mm ( 41×8.5×13.5 ft)
·This new generation of Frac pumping unit was independently developed by JEREH. The hydraulic output per unit is 2500hp with maximum working pressure is 140MPa (20,000 psi).
·The chassis is KENWORTH off-road truck dedicated to oilfield applications. The chassis design can be tailored to customer special needs based on deck configuration. The Smart Pump Control System (SPC2.2) was independently developed by JEREH and is capable of controlling 24 sets of Frac pumping units at the same time.
·The engine and transmission are controlled by J1939 which is an industry standard.
·Ethernet communication technology makes remote operation easy and reliable.
Chassis
KENWORTH 8×4 (Mercedes-Benz 8×6,optional)
Deck Engine
DDC 16V 4000 (3,000 bhp)
Deck Transmission
TWIN DISC 8FLW-2302 Torque Converter And TA90-8501 Mechanical Transmission
Quintuplex Plunger Pump
FMC WQ2700(4 in Plungers)or OFM2800 (3.75 in Plungers)
Max. Working Pressure
140 MPa (20,000 psi)
Rated Output Power
1,860 kW (2,500 hhp)
Max. Working Flow Rate
2.17 m
3
/min (pump pressure 50MPa)
or 2.81 m
3
/min (pump pressure 40MPa)
Unit Weight
44,870 kg ( 98,921 lb)
Overall Dimensions
12,500×2,590×4,100 mm ( 41×8.5×13.5 ft)
Francis Turbine Generating Unit
1. suitible for medium and low water head
2. great efficiency
4. high quality and advance craft
3. good performance
1. corrosion resisting
2. long life (more than 50 years )
3. high efficiency
4. good quality
specification
net head
88m
rated discharge
1.86m3/s
rated efficiency
88%
rated speed
1000r/min
install capacity
1250KW
2. great efficiency
4. high quality and advance craft
3. good performance
1. corrosion resisting
2. long life (more than 50 years )
3. high efficiency
4. good quality
specification
net head
88m
rated discharge
1.86m3/s
rated efficiency
88%
rated speed
1000r/min
install capacity
1250KW
1kw vertical wind turbine VAWT
1kw wind turbine:
1.Low start-up wind speed
2.Better quality, low noise
3.Safe,quiet,efficient
4..Own patent and CE
1kw vertical axis wind turbine:
Product Name:off Grid Wind Turbine Generation 50W-5KW
Model No.:CTV-50W~5KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our VAWT:
Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.If you are interested in our VAWT, Please inform me anytime
1.Low start-up wind speed
2.Better quality, low noise
3.Safe,quiet,efficient
4..Own patent and CE
1kw vertical axis wind turbine:
Product Name:off Grid Wind Turbine Generation 50W-5KW
Model No.:CTV-50W~5KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our VAWT:
Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.If you are interested in our VAWT, Please inform me anytime
Francis hydro turbine
Francis hydro turbine
corrosion resisting
long life (about 50 years )
high efficiency
good quality
Francis hydro turbine
1.Rich making experience
Our company is specialized in making high quality water turbine, like kaplan turbine, francis turbine, pelton turbine, turgo turbine and other relactive equipment for more than 10 years. Our products are well sold to all over the world.
2. Easy installation & operation
We have a wide range of water turbines for building hydraulic generator systems. It is designed of easy installation and operation which is very convenience for customers.
3. High efficiency and performance
Our generator can be used in variou environments. Our water turbine is produced with high efficiency via rich experience of research and development.
4. Long life
Our water machine is made of stainless steel which can protect turbines form rust corrosion.
5. Pure heart consult and after service
We can send several engineers to your part to help and assist the install and maintain the water turbine machine. Any question with the machine , you can feel free to consult us.
Francis water turbine:
Francis turbine is the development of high-head hydropower resources of the excellent models for the 30-700m-head power plant use, mixed-flow turbine has a reasonable compact structure, convenient
operation and maintenance, high efficiency, there are two types of vertical and horizontal, in order to models are widely used in hydropower station.
Available product model:
HL90/D54-WJ-42-200 HL240-WJ-42-200 HL90D54-LJ-100-200 HL240-LJ100200
HL100-WJ-42-200 HLD41-WJ-42-200 HL100-LJ-100-200 HLD41-LJ-100-200
HL110-WJ-35-200 HL240-WJ-42-200 HL110-LJ-100-200 HL240C-LJ-100-200
HLJS01-WJ-35-200 HL260-WJ-35-200 HLJS01-LJ-100-200 HL260-LJ-100-200
HL160-WJ-42-200 HLA244-WJ-35-200 HL160-LJ-100-200 HLA244-LJ-100-200
HLD46-WJ-42-200 HLD74-WJ-35-200 HLD46-LJ-100-200 HLD74-LJ-100-200
HL180-WJ-42-200 HLA551-WJ-35-200 HL180-LJ-100-200 HLA551-LJ-100-200
HLJD06A-WJ-42-200 HLA295-WJ-35-200 HLJD06A-LJ-100-200 HLA295-LJ-100-200
HLJA194-WJ-42-200 HL820-WJ-35-200 HLJA194-LJ-100-200 HLA820-LJ-100-200
HLJ220-WJ-35-200 HL260C-WJ-35-200 HL220-LJ-100-200 HL260C-LJ-100-260
HLA153-WJ-35-200 HLA153-LJ-100-200
corrosion resisting
long life (about 50 years )
high efficiency
good quality
Francis hydro turbine
1.Rich making experience
Our company is specialized in making high quality water turbine, like kaplan turbine, francis turbine, pelton turbine, turgo turbine and other relactive equipment for more than 10 years. Our products are well sold to all over the world.
2. Easy installation & operation
We have a wide range of water turbines for building hydraulic generator systems. It is designed of easy installation and operation which is very convenience for customers.
3. High efficiency and performance
Our generator can be used in variou environments. Our water turbine is produced with high efficiency via rich experience of research and development.
4. Long life
Our water machine is made of stainless steel which can protect turbines form rust corrosion.
5. Pure heart consult and after service
We can send several engineers to your part to help and assist the install and maintain the water turbine machine. Any question with the machine , you can feel free to consult us.
Francis water turbine:
Francis turbine is the development of high-head hydropower resources of the excellent models for the 30-700m-head power plant use, mixed-flow turbine has a reasonable compact structure, convenient
operation and maintenance, high efficiency, there are two types of vertical and horizontal, in order to models are widely used in hydropower station.
Available product model:
HL90/D54-WJ-42-200 HL240-WJ-42-200 HL90D54-LJ-100-200 HL240-LJ100200
HL100-WJ-42-200 HLD41-WJ-42-200 HL100-LJ-100-200 HLD41-LJ-100-200
HL110-WJ-35-200 HL240-WJ-42-200 HL110-LJ-100-200 HL240C-LJ-100-200
HLJS01-WJ-35-200 HL260-WJ-35-200 HLJS01-LJ-100-200 HL260-LJ-100-200
HL160-WJ-42-200 HLA244-WJ-35-200 HL160-LJ-100-200 HLA244-LJ-100-200
HLD46-WJ-42-200 HLD74-WJ-35-200 HLD46-LJ-100-200 HLD74-LJ-100-200
HL180-WJ-42-200 HLA551-WJ-35-200 HL180-LJ-100-200 HLA551-LJ-100-200
HLJD06A-WJ-42-200 HLA295-WJ-35-200 HLJD06A-LJ-100-200 HLA295-LJ-100-200
HLJA194-WJ-42-200 HL820-WJ-35-200 HLJA194-LJ-100-200 HLA820-LJ-100-200
HLJ220-WJ-35-200 HL260C-WJ-35-200 HL220-LJ-100-200 HL260C-LJ-100-260
HLA153-WJ-35-200 HLA153-LJ-100-200
Francis turbine for Power Station
Francis turbine for Power Station
High efficiency: up to 95%
Certificate: ISO9001~2008
runner material ZG0Cr13Ni4Mo
Francis turbine for Power Station
HLA575C-WJ-60
HL----Francis turbine
A575C----Runner model named by the research and development company
W---- Horizontal shaft
J----Metal spiral casing
60----runner nominal diameter is 600mm
characteristics
1.water turbine generator
We specialize in water turbine manufacturing for over 40years. The water turbines we supplies severs a wide range of costumers in and out of China.
2.easy installation & operation
We have a wide range of water turbines for building hydraulic generator systems.It is designed of
easy installation and operation.
3.high efficacy
The water powder generator can be applied in varies place and environment.Our water turbine is produced with high efficacy via our long years experience of research and development.
4.
export area(some examples)
we have exported water turbine generator sets to
Vietnam——April,2007(2*3200KW)
Peru——November,2007(2*1250KW)
Burma——December,2008(2*400KW)
Burma——November,2009(2*200KW)
Albania——July,2011(2*1250KW,1*630KW,2*400KW)
High efficiency: up to 95%
Certificate: ISO9001~2008
runner material ZG0Cr13Ni4Mo
Francis turbine for Power Station
HLA575C-WJ-60
HL----Francis turbine
A575C----Runner model named by the research and development company
W---- Horizontal shaft
J----Metal spiral casing
60----runner nominal diameter is 600mm
characteristics
1.water turbine generator
We specialize in water turbine manufacturing for over 40years. The water turbines we supplies severs a wide range of costumers in and out of China.
2.easy installation & operation
We have a wide range of water turbines for building hydraulic generator systems.It is designed of
easy installation and operation.
3.high efficacy
The water powder generator can be applied in varies place and environment.Our water turbine is produced with high efficacy via our long years experience of research and development.
4.
export area(some examples)
we have exported water turbine generator sets to
Vietnam——April,2007(2*3200KW)
Peru——November,2007(2*1250KW)
Burma——December,2008(2*400KW)
Burma——November,2009(2*200KW)
Albania——July,2011(2*1250KW,1*630KW,2*400KW)
Francis turbine generator
1.For water 30-700m
2.Unit efficiency up to 95%
3.Stable operation to 50 years
4.Runner material:ZG0Cr13Ni4Mo
5.R&D support
2.Unit efficiency up to 95%
3.Stable operation to 50 years
4.Runner material:ZG0Cr13Ni4Mo
5.R&D support
Francis water turbine for sales
1.High quality stainless steel and alloy
2.Environment-friendly
3.Optimum efficiency
4.Stable operation
5.R & D support
2.Environment-friendly
3.Optimum efficiency
4.Stable operation
5.R & D support
Freestanding Tower
Freestanding tower
Freestanding tower:
Monopole or tube freestanding towers enjoy a wide application, made of quality steel, firm, easy to install and the occupied area is small
Hot-dip galvanize,Paint coating
Freestanding tower:
Monopole or tube freestanding towers enjoy a wide application, made of quality steel, firm, easy to install and the occupied area is small
Hot-dip galvanize,Paint coating
Fresh Biomass Briquette Forming Machine
Biomass Briquette Forming Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
Fuel Dispenser with ATEX and Russian Certificate
1)Censtar China top brand.
2)Multi products fuel dispenser, with Atex and Russian Certificate
Censtar fuel dispenser, this series is multi products fuel dispenser, available as suction pump and remote dispenser, with 4,6 or 8 hoses
Features:
1) GP03 gear pump and LLG05 4-piston flow meter used
2) Wide range for power supply
3) Last sales recall
4) Hose retraction
5) International solenoid valve
6) Big LCD display with high light back ground source
7) Space for local card payment system
8) Interface for local management system
9) Automatic shutoff nozzle
10) Multi filtration system
11) The internal filters can be cleaned
12) Keypad or without keypad
13) Vapor recovery system
14) Low or high temperature
15) Emergency shutoff valve for remote dispenser
16) Net sizes: 1,480 x 690 x 2,150mm for 4 hoses and 6 hoses,
1,889 x 690 x 2,150mm for 8 hoses
17) Suction pump fuel dispenser
a) CS52J4221G: 4 hoses, 2 products, 1 display for each side
b) CS52J6321G: 6 hoses, 3 products, 1 display for each side
c) CS52J8421G: 8 hoses, 4 products, 1 display for each side
18) Remote dispenser:
a) CS52D4221F: 4 hoses, 2 products, 1 display for each side
b) CS52D6321F: 6 hoses, 3 products, 1 display for each side
c) CS52D8421F: 8 hoses, 4 products, 1 display for each side
Outer packing:
Packing dimensions:
1) 4 and 6 hoses: 1550 x 760 x 2260mm
2) 8 hoses: 2059 x 840 x 2270mm
2)Multi products fuel dispenser, with Atex and Russian Certificate
Censtar fuel dispenser, this series is multi products fuel dispenser, available as suction pump and remote dispenser, with 4,6 or 8 hoses
Features:
1) GP03 gear pump and LLG05 4-piston flow meter used
2) Wide range for power supply
3) Last sales recall
4) Hose retraction
5) International solenoid valve
6) Big LCD display with high light back ground source
7) Space for local card payment system
8) Interface for local management system
9) Automatic shutoff nozzle
10) Multi filtration system
11) The internal filters can be cleaned
12) Keypad or without keypad
13) Vapor recovery system
14) Low or high temperature
15) Emergency shutoff valve for remote dispenser
16) Net sizes: 1,480 x 690 x 2,150mm for 4 hoses and 6 hoses,
1,889 x 690 x 2,150mm for 8 hoses
17) Suction pump fuel dispenser
a) CS52J4221G: 4 hoses, 2 products, 1 display for each side
b) CS52J6321G: 6 hoses, 3 products, 1 display for each side
c) CS52J8421G: 8 hoses, 4 products, 1 display for each side
18) Remote dispenser:
a) CS52D4221F: 4 hoses, 2 products, 1 display for each side
b) CS52D6321F: 6 hoses, 3 products, 1 display for each side
c) CS52D8421F: 8 hoses, 4 products, 1 display for each side
Outer packing:
Packing dimensions:
1) 4 and 6 hoses: 1550 x 760 x 2260mm
2) 8 hoses: 2059 x 840 x 2270mm
Fuel Dispenser with Multi-media TV
Fuel Dispenser: 1) Double nozzles, 2 oil product, 2 flow meter, gear pump
Fuel Dispenser: Double nozzles, 2 oil products, 2 flow meters, gear pumpSize: 1185*590*2390mmRange of flow: (5~55)L/min Accuracy: ±0.3% Inlet vacuity: ≥54kPa Scope of unit price: 0~99.99/LRange of single counting: Volume/Amount: 09999.99L Range of accumulative counting: Volume/Amount: 0999999.99LPower supply: AC220V 50HZ / 380V 50HZ Rated power: 750W / 1100WAmbient temp: -40~+55°C Relative humidity: 30%90%Packing: paper carton or wooden case
Fuel Dispenser: Double nozzles, 2 oil products, 2 flow meters, gear pumpSize: 1185*590*2390mmRange of flow: (5~55)L/min Accuracy: ±0.3% Inlet vacuity: ≥54kPa Scope of unit price: 0~99.99/LRange of single counting: Volume/Amount: 09999.99L Range of accumulative counting: Volume/Amount: 0999999.99LPower supply: AC220V 50HZ / 380V 50HZ Rated power: 750W / 1100WAmbient temp: -40~+55°C Relative humidity: 30%90%Packing: paper carton or wooden case
Fuel Dispenser-Red Sun Series
1 Nozzles
1 Products
Components Installed(standard):
1.LanFeng Electronic Unit
2.MJ85-S Flowmeter.
3.ZCB-90 Gear Pump.
4.TD-20A SelfShut-Off Nozzle.
5.380V Ex-Motor
Technical Specifications:
1.Accuracy: ±0.3%
2.Frequency: 50HZ±1HZ
3.Delivery Rate: 550L/min
4.Rating Power: 0.75KW
5.Measurbale Minimum: 5L
6.Ambient Humidity: 30%90%
7.Noise: ≤80dB(A)
8.Ambient Temperature: -40+60
9.Inlet Vacuum: ≥0.06MPa
10.Anti-Explosive ID: Exdm[ib]ib AT3
11.Register Range: 0.009800.00L or Yuan
12.Anti-Explosive Certificate Number: CE011154 CE011155 CE011156 CE011157
13.Totalizer Range:0.0099999999999.99L or Yuan
14.Range of Price: 0.0199.99Yuan/L
15.License of Manufacturing Metric Instrument:ZheZi00000625
16.Preset Min Value: 0.000.99L
17.Power Supply: AC380V±20% or AC220V±20%
1 Products
Components Installed(standard):
1.LanFeng Electronic Unit
2.MJ85-S Flowmeter.
3.ZCB-90 Gear Pump.
4.TD-20A SelfShut-Off Nozzle.
5.380V Ex-Motor
Technical Specifications:
1.Accuracy: ±0.3%
2.Frequency: 50HZ±1HZ
3.Delivery Rate: 550L/min
4.Rating Power: 0.75KW
5.Measurbale Minimum: 5L
6.Ambient Humidity: 30%90%
7.Noise: ≤80dB(A)
8.Ambient Temperature: -40+60
9.Inlet Vacuum: ≥0.06MPa
10.Anti-Explosive ID: Exdm[ib]ib AT3
11.Register Range: 0.009800.00L or Yuan
12.Anti-Explosive Certificate Number: CE011154 CE011155 CE011156 CE011157
13.Totalizer Range:0.0099999999999.99L or Yuan
14.Range of Price: 0.0199.99Yuan/L
15.License of Manufacturing Metric Instrument:ZheZi00000625
16.Preset Min Value: 0.000.99L
17.Power Supply: AC380V±20% or AC220V±20%
1kw vertical wind turbine for home roof
1kw wind turbine:
1.low start-up wind speed
2.reliable quality
3.energy-saving
4.long service life
1kw wind turbine:
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed. 3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave with automatic on-grid interface or directly on grid invertor.
Vertical Wind Turbine -- VH Model 1KW
Item/Model
CTV-1KW
Rated Speed (m/s)
8
Rated Power (w)
1000
Working Speed (m/s)
3–25
Rotor Diameter (m)
1.75
OUT DC off grid (v)
48
Blade Length (m)
1.8
Baterry off grid
12V150AH*4
Setup Speed (m/s)
2.5
Height of Tower (m)
6
Generator Type
3 phase permanent magnet,direct driven
Charge Controller
with Automatic Electrical Brake
Pure Sine Wave Inverter
110/220/230v,50/60Hz
The pictures of our VAWT:
1.low start-up wind speed
2.reliable quality
3.energy-saving
4.long service life
1kw wind turbine:
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed. 3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave with automatic on-grid interface or directly on grid invertor.
Vertical Wind Turbine -- VH Model 1KW
Item/Model
CTV-1KW
Rated Speed (m/s)
8
Rated Power (w)
1000
Working Speed (m/s)
3–25
Rotor Diameter (m)
1.75
OUT DC off grid (v)
48
Blade Length (m)
1.8
Baterry off grid
12V150AH*4
Setup Speed (m/s)
2.5
Height of Tower (m)
6
Generator Type
3 phase permanent magnet,direct driven
Charge Controller
with Automatic Electrical Brake
Pure Sine Wave Inverter
110/220/230v,50/60Hz
The pictures of our VAWT:
Fuel Nozzle ZYQ-75AP Fuel Nozzle Spout
fuel nozzle spout, the fuel nozzle spout outlet diameter:13/16"
Fuel Nozzle
Automatic nozzle
Technical Specifications:
1.Inlet Thread: BSPF/NPT
2.Diameter of spout: (13/16) " & (15/16)"
3.Color of insulator: red/green/blue/yellow/black
4.Package: 10pcs/carton
5.Net Weight: 13kg
6.Gross Weight: 14kg
7.Dimension: 420×340×400mm
Technical Specifications:
1.Inlet Thread: BSPF/NPT
2.Diameter of spout: (13/16) " & (15/16)"
3.Color of insulator: red/green/blue/yellow/black
4.Package: 10pcs/carton
5.Net Weight: 13kg
6.Gross Weight: 14kg
7.Dimension: 420×340×400mm
Fuel Nozzle
Automatic nozzle
Technical Specifications:
1.Inlet Thread: BSPF/NPT
2.Diameter of spout: (1+1/16)" & (1+3/16)"
3. Color of insulator: red/green/blue/yellow/black
4.Package: 10pcs/carton
5.Net Weight: 17kg
6.Gross Weight: 18kg
7.Dimension: 420×340×400mm
Technical Specifications:
1.Inlet Thread: BSPF/NPT
2.Diameter of spout: (1+1/16)" & (1+3/16)"
3. Color of insulator: red/green/blue/yellow/black
4.Package: 10pcs/carton
5.Net Weight: 17kg
6.Gross Weight: 18kg
7.Dimension: 420×340×400mm
Fuel Nozzle
Automatic nozzle
Technical Specifications:
1.Inlet Thread: BSPF/NPT
2.Diameter of spout: (13/16)" & (15/16)"
3.Color of insulator: red/green/blue/yellow/black
4.Package: 10pcs/carton
5. Net Weight: 13kg
6.Gross Weight: 14kg
7. Dimension: 420×340×400mm
Technical Specifications:
1.Inlet Thread: BSPF/NPT
2.Diameter of spout: (13/16)" & (15/16)"
3.Color of insulator: red/green/blue/yellow/black
4.Package: 10pcs/carton
5. Net Weight: 13kg
6.Gross Weight: 14kg
7. Dimension: 420×340×400mm
Fuel Oil Dispenser
One Nozzle
One Product
Hi Flow 90~800 L/m
fuel dispenser / oil dispenser / gas dispenser
APPLICTATION
Oil Refinery, Storage Transportation, Petrol Station & Storage Truck, Aviation Fueling, Railway Fueling, Public Transport Department, Vessel Fueling, Corporation Oil Transportation
TECHNICALDATA
Flow Rate PumpFlow MeterMotorHoseNozzle
50~90 L/min
ZCB90
MJ85-S
1.1kW
1"
1"
90~120 L/min
YB40
MJ-220
2.2kW
1"
1"
120~180 L/min
YB40
M-40-1
2.2kW
1.2"
1.5"
180~300 L/min
YB65
M-50-1
2.8kW
2"
Self-Made
300~500 L/min
YB65
M-50-1
3.7kW
2.5"
Self-Made
500~800 L/min
YB80
M-80-1
5.8~7.1kW
3"
Self-Made
*fuel dispenser / oil dispenser / gas dispenser
One Product
Hi Flow 90~800 L/m
fuel dispenser / oil dispenser / gas dispenser
APPLICTATION
Oil Refinery, Storage Transportation, Petrol Station & Storage Truck, Aviation Fueling, Railway Fueling, Public Transport Department, Vessel Fueling, Corporation Oil Transportation
TECHNICALDATA
Flow Rate PumpFlow MeterMotorHoseNozzle
50~90 L/min
ZCB90
MJ85-S
1.1kW
1"
1"
90~120 L/min
YB40
MJ-220
2.2kW
1"
1"
120~180 L/min
YB40
M-40-1
2.2kW
1.2"
1.5"
180~300 L/min
YB65
M-50-1
2.8kW
2"
Self-Made
300~500 L/min
YB65
M-50-1
3.7kW
2.5"
Self-Made
500~800 L/min
YB80
M-80-1
5.8~7.1kW
3"
Self-Made
*fuel dispenser / oil dispenser / gas dispenser
Fuel price sign stand,fuel price board,fuel money sign,fuel cost sign display
1.fuel price sign stand
2.Update gas price
3.7 segment digits
4.digit height: 8"; 10"; 12''; 20''; 24"
5.wireless control
Features:
1. Adopt better chips LEDs with Super brightness and visibility
2. Wireless data sender and remote control.
3. Brightness can be adjusted automatically by a lighter sensor.
4. Adapt the display intensity to save the electric energy.
5. Temperature control system within the panels for heat extraction, to assist cooling the LED’s.
6. A finished cabinet makes installation trouble-free with no additional fabrication needed.
Functions:
The LED gas price display system is designed for the long distance display and controlled in the gas stations. It adopted super brightness LED, wireless data sender and remote controller. The user can control the LED gas price display with the remote controller: 1. Update the gas price 2. Record the gas price 3. Adapt the display intensity to save the electric energy.
Parameter:
1. Digit color: red, green, amber
2. 7 segment digits, digit height: 8"; 10"; 12''; 20''; 24"
3.
Display format: 8889
4. Display intensity: 5000cd/m
2
5. Wireless Communication Distance: >300m
6. Wireless module working frequency: 900MHz~928MHz
7. Working environment: -10°C~80°C, 10~80%RH
8. Viewing angle: 140°, Visibility: >500m
9. Operation Voltage: AC 110V/220V 45~65Hz
2.Update gas price
3.7 segment digits
4.digit height: 8"; 10"; 12''; 20''; 24"
5.wireless control
Features:
1. Adopt better chips LEDs with Super brightness and visibility
2. Wireless data sender and remote control.
3. Brightness can be adjusted automatically by a lighter sensor.
4. Adapt the display intensity to save the electric energy.
5. Temperature control system within the panels for heat extraction, to assist cooling the LED’s.
6. A finished cabinet makes installation trouble-free with no additional fabrication needed.
Functions:
The LED gas price display system is designed for the long distance display and controlled in the gas stations. It adopted super brightness LED, wireless data sender and remote controller. The user can control the LED gas price display with the remote controller: 1. Update the gas price 2. Record the gas price 3. Adapt the display intensity to save the electric energy.
Parameter:
1. Digit color: red, green, amber
2. 7 segment digits, digit height: 8"; 10"; 12''; 20''; 24"
3.
Display format: 8889
4. Display intensity: 5000cd/m
2
5. Wireless Communication Distance: >300m
6. Wireless module working frequency: 900MHz~928MHz
7. Working environment: -10°C~80°C, 10~80%RH
8. Viewing angle: 140°, Visibility: >500m
9. Operation Voltage: AC 110V/220V 45~65Hz
Fuel saver
Fuel saver
Control Pedal Fuel Signal
Test report:NISSAN Test Center
Efficiency 5%~15%
Use EURO3/4 Common Rail Diesel Engine
Fuel saver
Control Pedal Fuel Signal
The DS-002 Fuel Saver Control Fuel Signal , designed theory is to control the Accelerator Position Sensor (APS) signal in excess fuel consumption section of IC loop. When driving, the Fuel saver product, Fuel Consumption Actuarial Monitor, will calculate and transmit the best fuel injection feedback to the vehicle ECU (Engine Computer). In the condition of not losing horsepower, much a little fuel saving can make a mickle with our Fuel saver products !
* Product type: DS-002
* Application: EURO3/4 Common Rail Diesel Vehicles.
* Vehicle type: BUS & Larger Truck & Excavator.
* Design principle: Control Pedal Fuel Signal
* Never slow performance.
* Changed fuel injection volume ,Save fuel obviously,Fuel
times become less,One fuel tank can run more days
than before.
* Removable to your next vehicle.
* Working perfectly during valid lifetime.
Control Pedal Fuel Signal
Test report:NISSAN Test Center
Efficiency 5%~15%
Use EURO3/4 Common Rail Diesel Engine
Fuel saver
Control Pedal Fuel Signal
The DS-002 Fuel Saver Control Fuel Signal , designed theory is to control the Accelerator Position Sensor (APS) signal in excess fuel consumption section of IC loop. When driving, the Fuel saver product, Fuel Consumption Actuarial Monitor, will calculate and transmit the best fuel injection feedback to the vehicle ECU (Engine Computer). In the condition of not losing horsepower, much a little fuel saving can make a mickle with our Fuel saver products !
* Product type: DS-002
* Application: EURO3/4 Common Rail Diesel Vehicles.
* Vehicle type: BUS & Larger Truck & Excavator.
* Design principle: Control Pedal Fuel Signal
* Never slow performance.
* Changed fuel injection volume ,Save fuel obviously,Fuel
times become less,One fuel tank can run more days
than before.
* Removable to your next vehicle.
* Working perfectly during valid lifetime.
Fukkol FK-2700 Emulsion Cutting Fluid
Fukkol Emulsion cutting fluid
-biological stability additive
-doesn't contain nitrite and can dilute with water
Fukkol Emulsion cutting fluid
Description
Fukkol FK-2700 has biological stability additive which can provide a longer using time. it doesn;t contain nitrite and can dilute with water in the ration of 1:20-15, Fukkol FK-2700 is the product of chiuce when grade rationaliztion is to be considered within lager machine shop environments .It can be use in cutting common alloys, including non-ferrous metal. High concentration fluid can use in ground dinish.
-biological stability additive
-doesn't contain nitrite and can dilute with water
Fukkol Emulsion cutting fluid
Description
Fukkol FK-2700 has biological stability additive which can provide a longer using time. it doesn;t contain nitrite and can dilute with water in the ration of 1:20-15, Fukkol FK-2700 is the product of chiuce when grade rationaliztion is to be considered within lager machine shop environments .It can be use in cutting common alloys, including non-ferrous metal. High concentration fluid can use in ground dinish.
Fukkol FL-888 Semi-synthetic fluid
Fukkol FL-888 Semi-synthetic fluid
-semi-syn, two superior charecter
-for use in aluminium and stainless
Fukkol FL-888 Semi-synthetic fluid
Description :
Fukkol FL-888 is bistable, semi-synthetic cutting
concentrate specially formulated with high levels of
lubricity for use with aluminium and its alloys in the most
arduous modem machining operations, using a wide
range of diluent waters. Combines the advantages of the
new bistable technology, and its inherent resistance to
bacteria, with the traditional values of an oil-based, high
lubricity cutting fluid.
Benefits:
-Maximum machining efficiency.
-Superior surface finish to other oils.
-Non-staining to aluminium.
-Prolonged sump life versus soluble oils.
Applications:
*Specially formulated for use with aluminium and its
alloys in modem machining applications .
*Particularly suitable for operations such as tapping small
diameter holes in the softer alloys.
*Recommended for use when conventional fluids have
proved to be incapable of proved to be incapable of
providing the required machining performance, tool life or
surface finish.
*Heavy-duty machining of softer materials such as
aluminium and its alloys.
*Particularly suitable for softer, lower silicon alloys of
aluminium.
*General machining of copper and its alloys, including
high strength copper alloys.
-semi-syn, two superior charecter
-for use in aluminium and stainless
Fukkol FL-888 Semi-synthetic fluid
Description :
Fukkol FL-888 is bistable, semi-synthetic cutting
concentrate specially formulated with high levels of
lubricity for use with aluminium and its alloys in the most
arduous modem machining operations, using a wide
range of diluent waters. Combines the advantages of the
new bistable technology, and its inherent resistance to
bacteria, with the traditional values of an oil-based, high
lubricity cutting fluid.
Benefits:
-Maximum machining efficiency.
-Superior surface finish to other oils.
-Non-staining to aluminium.
-Prolonged sump life versus soluble oils.
Applications:
*Specially formulated for use with aluminium and its
alloys in modem machining applications .
*Particularly suitable for operations such as tapping small
diameter holes in the softer alloys.
*Recommended for use when conventional fluids have
proved to be incapable of proved to be incapable of
providing the required machining performance, tool life or
surface finish.
*Heavy-duty machining of softer materials such as
aluminium and its alloys.
*Particularly suitable for softer, lower silicon alloys of
aluminium.
*General machining of copper and its alloys, including
high strength copper alloys.
1kw vertical wind turbine for home use
vertical wind turbine :
1.low start-up wind speed
2.high ability of anti-wind
3.CE,ISO certified
4.no noise,maintenance-free
vertical wind turbine :
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Power
1kw
Rotor diameter
1.75m
Height of blades
1.8m
Break method
Electromagnetic brake
Material of blades
Glass Fiber Reinforced Plastic
Noise at 3 meter
<30dB
Upper weight(kg)
95
Number of blades
4
Rated rotor speed
200r/min
Rated wind speed
8m/s
Start-up wind speed
2m/s
Work wind speed
3-25m/s
Survival wind speed
40m/s
Output voltage(DC)
48V
Height of tower(advised)
6m
Output control system
charger control, inverter
Suggestion battery
12V150AH*4
the pictures of 1kw installed photos:
1.low start-up wind speed
2.high ability of anti-wind
3.CE,ISO certified
4.no noise,maintenance-free
vertical wind turbine :
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Power
1kw
Rotor diameter
1.75m
Height of blades
1.8m
Break method
Electromagnetic brake
Material of blades
Glass Fiber Reinforced Plastic
Noise at 3 meter
<30dB
Upper weight(kg)
95
Number of blades
4
Rated rotor speed
200r/min
Rated wind speed
8m/s
Start-up wind speed
2m/s
Work wind speed
3-25m/s
Survival wind speed
40m/s
Output voltage(DC)
48V
Height of tower(advised)
6m
Output control system
charger control, inverter
Suggestion battery
12V150AH*4
the pictures of 1kw installed photos:
Full Spiral Energy Saving Lamp
Full Spiral Energy Saving Lamp
80% Energy Saving with high lumen , CE ROHS is approval
Economic lighting wth cheap price
Spiral Energy Saving Lamp
Voltage:110-130/220-240
watt:9W,11W,13W,15W,18W,20W,23W,26W,30W,36W
Base: E27/B22
Lifehours:8000H
Color temperature:2700K-6500K
80% Energy Saving with high lumen , CE ROHS is approval
Economic lighting wth cheap price
Spiral Energy Saving Lamp
Voltage:110-130/220-240
watt:9W,11W,13W,15W,18W,20W,23W,26W,30W,36W
Base: E27/B22
Lifehours:8000H
Color temperature:2700K-6500K
Thursday, August 25, 2011
Full spiral energy saving lamps/CFL
Full spiral energy saving lamps/CFL
long lifetime,High power saving 85%,more brighter
CE ROHS is approval
Full spiral energy saving lamps/CFL specification'
Voltage:110-130/220-240
Watt:5w,7w,9w,11w,13w,15w,18w,
Base:E27/B22
lifehoures:≥8000h
color temperaturer:2700-6500k
color index:≥82
Jiaxing Bingsheng Lighting Appliance Co., Ltd.(Haiyan Bingsheng Bulb Co.,Ltd ), located in Shiquan Town of Zhejiang province ,is specialized in manufacturing all kinds of lighting source products since 1985 .
Our products range includes different kinds of incandescent bulbs ,energy saving lamps ,Halogen bulbs ,LED lamps and fluorescent tubes etc .All of them are exported to the worldwide market .Based on excellent quality ,reasonable prices and perfect trade service ,our products maintain good reputation in the world .
We have over 40000 square meters production area . Our monthly capacity of incandescent bulbs is up to 6,000,000pcs per month . Our factory have been ISO 9001 certified. All our products have CE ,ROHS approvals .
We have strong R&D capacity and quality control team .We ceaselessly develop new products to meet with our customers’ demand .Top quality and credit service is our aim forever .We make sure every product to our clients is perfect without any performance fault .
We sincerely welcome all customers from all over the world to establish good business relationship with us !
long lifetime,High power saving 85%,more brighter
CE ROHS is approval
Full spiral energy saving lamps/CFL specification'
Voltage:110-130/220-240
Watt:5w,7w,9w,11w,13w,15w,18w,
Base:E27/B22
lifehoures:≥8000h
color temperaturer:2700-6500k
color index:≥82
Jiaxing Bingsheng Lighting Appliance Co., Ltd.(Haiyan Bingsheng Bulb Co.,Ltd ), located in Shiquan Town of Zhejiang province ,is specialized in manufacturing all kinds of lighting source products since 1985 .
Our products range includes different kinds of incandescent bulbs ,energy saving lamps ,Halogen bulbs ,LED lamps and fluorescent tubes etc .All of them are exported to the worldwide market .Based on excellent quality ,reasonable prices and perfect trade service ,our products maintain good reputation in the world .
We have over 40000 square meters production area . Our monthly capacity of incandescent bulbs is up to 6,000,000pcs per month . Our factory have been ISO 9001 certified. All our products have CE ,ROHS approvals .
We have strong R&D capacity and quality control team .We ceaselessly develop new products to meet with our customers’ demand .Top quality and credit service is our aim forever .We make sure every product to our clients is perfect without any performance fault .
We sincerely welcome all customers from all over the world to establish good business relationship with us !
Full-automatic Insulating oil tester/dielectric strength tester of transformer oil
Full-automatic Insulating oil tester/dielectric strength tester of transformer oil is a test device for testing the dielectric
Full-automatic Insulating oil tester/dielectric strength tester of transformer oil
1.The summary
YJJ series Insulating oil tester is a test device for testing the dielectric strength of insulating oil , which is
produced according to the National standard GB-86 (Determination Method For Dielectric
Strength of Transformer Oil). The values are preset with the adjusting switch and then the
device strictly works on the basis of the preset values. After doing one test, the results can be
printed automatically.
2.Technical Data
a. input voltage: AC220V
b. output voltage: AC0-80kv
c. voltage rising rate: 2kv/s±10%
d. test precision: 1.0 grade
e. test times: 1---9, stirring time; 0---99seconds, stewing time:0---9 minutes 59seconds
f. temperature: 5----40°C, relative humidity: 990% RH
g. dimension: 520mm*400mm*400mm; net weight:45kg
Full-automatic Insulating oil tester/dielectric strength tester of transformer oil
1.The summary
YJJ series Insulating oil tester is a test device for testing the dielectric strength of insulating oil , which is
produced according to the National standard GB-86 (Determination Method For Dielectric
Strength of Transformer Oil). The values are preset with the adjusting switch and then the
device strictly works on the basis of the preset values. After doing one test, the results can be
printed automatically.
2.Technical Data
a. input voltage: AC220V
b. output voltage: AC0-80kv
c. voltage rising rate: 2kv/s±10%
d. test precision: 1.0 grade
e. test times: 1---9, stirring time; 0---99seconds, stewing time:0---9 minutes 59seconds
f. temperature: 5----40°C, relative humidity: 990% RH
g. dimension: 520mm*400mm*400mm; net weight:45kg
Fully Automatic Screw Press Machine From Dyan86-0371-60328000
Biocoal Forming Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
Functional straw briquette machine
Functional straw briquette machine
1.CE Certification
2.Hot sale in Europe
3.Long life
Functional straw briquette machine
Briquette ExtruderHongji charcoal/biomass briquette press can process any kinds of agro-forestry wastes into renewable bio-fuel. Biomass briquette press can make 30-90 mm solid, cylindrical or square fuel briquettes.
The briquette materials can be wood chips, sawdust, branches, rice husk, rice straw, cotton stalk, cottonseed skins, wood, wood shavings, wood chips, mustard stalk, wheat straw, soybeans husk, coffee husk, sunflower husk, peanut-shell, sugar cane bagasse, maize stalk, palm fruit bunch , paddy straw , tobacco waste, bamboo dust and any other crop wastes.
Biomass briquetting is the process of converting substantial biomass wastes into high density and energy concentrated bio fuel briquettes. Biomass briquettes are one kind of ultimate green energy source of renewable energy. And the biomass briquettes are non-conventional source of energy, renewable in nature, eco-friendly, non-polluting and economical. In the whole process no binders and chemicals are needed, 100% natural ensured. The higher density, the higher heating value, the biomass briquettes calorific value is up to 3000-4000 Cal/kg. Compared with fire wood and loose biomass, the briquettes show much higher heat because of lower moisture and higher density.
Biomass briquettes are widely used in boilers, refractory, chemicals, home heating, etc. They become more and more popular as fuel all over the world.
Flowchart of the Biomass Briquette Press Technology:
Crushing---drying---briquetting---carbonizing---final products
Hongji biomass/charcoal briquette Press is equipped with automatic temperature controlling system. The final briquettes are cylindrical or square, whose diameter range is 30-90 mm. The main parts include forming mould, propeller, inner sleeve and heating circle. Huifeng biomass briquette press can be operated 24 hours a day.
Characteristic
s
1. The processed materials diameter must be at 3-5 mm.
2. Use the advanced hot air drying system, the moisture of the raw materials is controlled in 8-12%.
3. No need to use binder and noxious chemical.
4. Screw type briquetting press.
Briquette press Models
Model
BJ-I
BJ-II
BJ-III
Capacity ( kg/h)
120-150
120-150
250-300
Motor Power (kw)
15
11
22
Net/Gross Weight(kg)
540/590
650/700
1080/1180
package dimension(m)
1.8X0.76X1.29
1.8X0.76X1.29
2.02X0.87X1.5
Diameter of finished products (mm)
30, 40, 50
30, 40, 50
60,70,80
1.CE Certification
2.Hot sale in Europe
3.Long life
Functional straw briquette machine
Briquette ExtruderHongji charcoal/biomass briquette press can process any kinds of agro-forestry wastes into renewable bio-fuel. Biomass briquette press can make 30-90 mm solid, cylindrical or square fuel briquettes.
The briquette materials can be wood chips, sawdust, branches, rice husk, rice straw, cotton stalk, cottonseed skins, wood, wood shavings, wood chips, mustard stalk, wheat straw, soybeans husk, coffee husk, sunflower husk, peanut-shell, sugar cane bagasse, maize stalk, palm fruit bunch , paddy straw , tobacco waste, bamboo dust and any other crop wastes.
Biomass briquetting is the process of converting substantial biomass wastes into high density and energy concentrated bio fuel briquettes. Biomass briquettes are one kind of ultimate green energy source of renewable energy. And the biomass briquettes are non-conventional source of energy, renewable in nature, eco-friendly, non-polluting and economical. In the whole process no binders and chemicals are needed, 100% natural ensured. The higher density, the higher heating value, the biomass briquettes calorific value is up to 3000-4000 Cal/kg. Compared with fire wood and loose biomass, the briquettes show much higher heat because of lower moisture and higher density.
Biomass briquettes are widely used in boilers, refractory, chemicals, home heating, etc. They become more and more popular as fuel all over the world.
Flowchart of the Biomass Briquette Press Technology:
Crushing---drying---briquetting---carbonizing---final products
Hongji biomass/charcoal briquette Press is equipped with automatic temperature controlling system. The final briquettes are cylindrical or square, whose diameter range is 30-90 mm. The main parts include forming mould, propeller, inner sleeve and heating circle. Huifeng biomass briquette press can be operated 24 hours a day.
Characteristic
s
1. The processed materials diameter must be at 3-5 mm.
2. Use the advanced hot air drying system, the moisture of the raw materials is controlled in 8-12%.
3. No need to use binder and noxious chemical.
4. Screw type briquetting press.
Briquette press Models
Model
BJ-I
BJ-II
BJ-III
Capacity ( kg/h)
120-150
120-150
250-300
Motor Power (kw)
15
11
22
Net/Gross Weight(kg)
540/590
650/700
1080/1180
package dimension(m)
1.8X0.76X1.29
1.8X0.76X1.29
2.02X0.87X1.5
Diameter of finished products (mm)
30, 40, 50
30, 40, 50
60,70,80
Functional straw briquette machine
Functional straw briquette machine
1.CE Certification
2.Hot sale in Europe
3.Easy operation
Functional
straw
briquette
machine
S
traw fuel can replace the wood, coal and Liquefied gas, etc., widely used in Living stove, heating furnace, hot water boilers, industrial boilers, biomass power plant and so on.
This machine shows the advantages of high automaticity, low electricity consumption, low price, high capacity and easy movable operation. And diesel engine is available.
Raw materials: All kinds of straw materials, just like crop stalks, wheat straw, grass, powder materials and ≤50mm diameter solid materials.
1.CE Certification
2.Hot sale in Europe
3.Easy operation
Functional
straw
briquette
machine
S
traw fuel can replace the wood, coal and Liquefied gas, etc., widely used in Living stove, heating furnace, hot water boilers, industrial boilers, biomass power plant and so on.
This machine shows the advantages of high automaticity, low electricity consumption, low price, high capacity and easy movable operation. And diesel engine is available.
Raw materials: All kinds of straw materials, just like crop stalks, wheat straw, grass, powder materials and ≤50mm diameter solid materials.
Futuramic Biomass Briquette Forming Machine
Biomass Briquette Forming Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
G40/G45 Globe shape incandescent bulbs with B22 Base
G40/G45 Globe shape incandescent bulbs with B22 Base global shade ,frosted color
CE ROHS is approval
ISO9001 certificate
G40/G45 Globe shape incandescent bulbs with B22 Base
Voltage:110-130/220-240
Watt:10w,15w,25w,40w,60w
Base:B22/E14/E27/E12
DxL:45x70 ,45x75
Life hours:>1000H
color:frosted
CE ROHS is approval
ISO9001 certificate
G40/G45 Globe shape incandescent bulbs with B22 Base
Voltage:110-130/220-240
Watt:10w,15w,25w,40w,60w
Base:B22/E14/E27/E12
DxL:45x70 ,45x75
Life hours:>1000H
color:frosted
Subscribe to:
Posts (Atom)