All kind of sizes
Light weight
Safty
Low cost
Joined and sealed firmly, more than 10 year lifespan
Light, foldable , easy to transport
No special condition needed for placement
easy and quick to install.
Suitable in both cold and hot areas (-20°C--60°C)
Good resistance to acid and alkali corrosion, and good resistance to wear.
Easy to assemble and disassemble, convenient to maintain and transport
convenient to increase and decrease the numbers of the bags according to the gas production or the volume of gas storage.
Wide range of usage.
Saturday, April 30, 2011
biogas technology ltd of biogas plant
biogas technology ltd for biogas plant
10 years experiece in this field
easy and cheap
100% guarantee safe
biogas technology ltd for biogas plant
The Family size PUXIN biogas system
is composed of a 6 or 10 m3 PUXIN biogas plant, pipe routes, gas purify devices and gas appliances or small power biogas generator. Family size PUXIN biogas system is mainly applied to farmhouse or domestic house to treat livestock waste, straw, human sewage and food waste.
Family size PUXIN biogas system has the flowing
FEATURES:
1
.EASY AND QUICK TO BE BUILT
The construction of PUXIN family size biogas system is exempt from the difficult airtight craft, so the technical difficulty is greatly decreased, and the construction period is greatly shortened. To build a Puxin Biogas Digester successfully, the constructers are only required to master how to assemble and disassemble the steel mould. Any workman can learn to build PUXIN family size biogas plant within a day and with 100% success rate.
2. High reliable
The steel mould and the glass fibre reinforced plastic gasholder can be mass-produced in factories, so that any place or country can build the Puxin Biogas Plant
3. Solid organic material (straw and grass etc.) can be used
4. Easy to maintain
When the gasholder is leaking, the leak can be found immediately, and can be repaired on ground.
5. Durable
The concrete digester can last over 30 years, and the glass fibre reinforced plastic gasholder over 10 years. When the gasholder is worn out, a new one is replaceable, so that the biogas plant can last over 30 years.
6. Excellent safety feature
When the gasholder is taken out, no biogas is left in the digester. The digester neck (1.5m in diam) is large enough to keep sufficient fresh air in the digester. So it is safe both to repair the digester inside and to replace fermentation material . When the gas pressure reaches its limit, there will be automatic gas leak, hence no damage to the plant.
7. Low cost
The Puxin Biogas Plant is composed of a concrete digester that is built with a steel mould provided by us, a glass fibre reinforced plastic gas-holder and a concrete or glass fibre reinforced plastic cover. The digester is 6 or 10 m3 of capacity. The gasholder is 1.6 m of diameter, 0.6 m of height and 1 m3 of capacity.
(1)The structure
(2) Superiority
Comparing with the traditional fixed dome type hydraulic Biogas plant, Puxin Biogas Digester has the following distinct advantages:
1) Easy to build and 100% success rate: The construction of Puxin Biogas Plant is exempt from the difficult airtight craft, so th technical difficulty is greatly decreased, and the construction perriod is greatly shortened. To build a Puxin Biogas Digester successfully, the constructers are only required to master how to assemble and disassemble the steel mould. Any workman can learn to build Puxin Biogas Digester within a day and with 100% success rate.
The construction process of Puxin Biogas Plant
A 10 m3 PUXIN biogas plant
A 6m3 PUXIN biogas plant
design
10 years experiece in this field
easy and cheap
100% guarantee safe
biogas technology ltd for biogas plant
The Family size PUXIN biogas system
is composed of a 6 or 10 m3 PUXIN biogas plant, pipe routes, gas purify devices and gas appliances or small power biogas generator. Family size PUXIN biogas system is mainly applied to farmhouse or domestic house to treat livestock waste, straw, human sewage and food waste.
Family size PUXIN biogas system has the flowing
FEATURES:
1
.EASY AND QUICK TO BE BUILT
The construction of PUXIN family size biogas system is exempt from the difficult airtight craft, so the technical difficulty is greatly decreased, and the construction period is greatly shortened. To build a Puxin Biogas Digester successfully, the constructers are only required to master how to assemble and disassemble the steel mould. Any workman can learn to build PUXIN family size biogas plant within a day and with 100% success rate.
2. High reliable
The steel mould and the glass fibre reinforced plastic gasholder can be mass-produced in factories, so that any place or country can build the Puxin Biogas Plant
3. Solid organic material (straw and grass etc.) can be used
4. Easy to maintain
When the gasholder is leaking, the leak can be found immediately, and can be repaired on ground.
5. Durable
The concrete digester can last over 30 years, and the glass fibre reinforced plastic gasholder over 10 years. When the gasholder is worn out, a new one is replaceable, so that the biogas plant can last over 30 years.
6. Excellent safety feature
When the gasholder is taken out, no biogas is left in the digester. The digester neck (1.5m in diam) is large enough to keep sufficient fresh air in the digester. So it is safe both to repair the digester inside and to replace fermentation material . When the gas pressure reaches its limit, there will be automatic gas leak, hence no damage to the plant.
7. Low cost
The Puxin Biogas Plant is composed of a concrete digester that is built with a steel mould provided by us, a glass fibre reinforced plastic gas-holder and a concrete or glass fibre reinforced plastic cover. The digester is 6 or 10 m3 of capacity. The gasholder is 1.6 m of diameter, 0.6 m of height and 1 m3 of capacity.
(1)The structure
(2) Superiority
Comparing with the traditional fixed dome type hydraulic Biogas plant, Puxin Biogas Digester has the following distinct advantages:
1) Easy to build and 100% success rate: The construction of Puxin Biogas Plant is exempt from the difficult airtight craft, so th technical difficulty is greatly decreased, and the construction perriod is greatly shortened. To build a Puxin Biogas Digester successfully, the constructers are only required to master how to assemble and disassemble the steel mould. Any workman can learn to build Puxin Biogas Digester within a day and with 100% success rate.
The construction process of Puxin Biogas Plant
A 10 m3 PUXIN biogas plant
A 6m3 PUXIN biogas plant
design
biogas technology ltd of biogas utilization
biogas technology ltd for biogas utilization
10 years experiece in this field
easy and cheap
100% guarantee safe
biogas technology ltd for biogas biogas utilization
The Family size PUXIN biogas system
is composed of a 6 or 10 m3 PUXIN biogas plant, pipe routes, gas purify devices and gas appliances or small power biogas generator. Family size PUXIN biogas system is mainly applied to farmhouse or domestic house to treat livestock waste, straw, human sewage and food waste.
Family size PUXIN biogas system has the flowing
FEATURES:
1
.EASY AND QUICK TO BE BUILT
The construction of PUXIN family size biogas system is exempt from the difficult airtight craft, so the technical difficulty is greatly decreased, and the construction period is greatly shortened. To build a Puxin Biogas Digester successfully, the constructers are only required to master how to assemble and disassemble the steel mould. Any workman can learn to build PUXIN family size biogas plant within a day and with 100% success rate.
2. High reliable
The steel mould and the glass fibre reinforced plastic gasholder can be mass-produced in factories, so that any place or country can build the Puxin Biogas Plant
3. Solid organic material (straw and grass etc.) can be used
4. Easy to maintain
When the gasholder is leaking, the leak can be found immediately, and can be repaired on ground.
5. Durable
The concrete digester can last over 30 years, and the glass fibre reinforced plastic gasholder over 10 years. When the gasholder is worn out, a new one is replaceable, so that the biogas plant can last over 30 years.
6. Excellent safety feature
When the gasholder is taken out, no biogas is left in the digester. The digester neck (1.5m in diam) is large enough to keep sufficient fresh air in the digester. So it is safe both to repair the digester inside and to replace fermentation material . When the gas pressure reaches its limit, there will be automatic gas leak, hence no damage to the plant.
7. Low cost
The Puxin Biogas Plant is composed of a concrete digester that is built with a steel mould provided by us, a glass fibre reinforced plastic gas-holder and a concrete or glass fibre reinforced plastic cover. The digester is 6 or 10 m3 of capacity. The gasholder is 1.6 m of diameter, 0.6 m of height and 1 m3 of capacity.
(1)The structure
(2) Superiority
Comparing with the traditional fixed dome type hydraulic Biogas plant, Puxin Biogas Digester has the following distinct advantages:
1) Easy to build and 100% success rate: The construction of Puxin Biogas Plant is exempt from the difficult airtight craft, so th technical difficulty is greatly decreased, and the construction perriod is greatly shortened. To build a Puxin Biogas Digester successfully, the constructers are only required to master how to assemble and disassemble the steel mould. Any workman can learn to build Puxin Biogas Digester within a day and with 100% success rate.
The construction process of Puxin Biogas Plant
A 10 m3 PUXIN biogas plant
A 6m3 PUXIN biogas plant
design
10 years experiece in this field
easy and cheap
100% guarantee safe
biogas technology ltd for biogas biogas utilization
The Family size PUXIN biogas system
is composed of a 6 or 10 m3 PUXIN biogas plant, pipe routes, gas purify devices and gas appliances or small power biogas generator. Family size PUXIN biogas system is mainly applied to farmhouse or domestic house to treat livestock waste, straw, human sewage and food waste.
Family size PUXIN biogas system has the flowing
FEATURES:
1
.EASY AND QUICK TO BE BUILT
The construction of PUXIN family size biogas system is exempt from the difficult airtight craft, so the technical difficulty is greatly decreased, and the construction period is greatly shortened. To build a Puxin Biogas Digester successfully, the constructers are only required to master how to assemble and disassemble the steel mould. Any workman can learn to build PUXIN family size biogas plant within a day and with 100% success rate.
2. High reliable
The steel mould and the glass fibre reinforced plastic gasholder can be mass-produced in factories, so that any place or country can build the Puxin Biogas Plant
3. Solid organic material (straw and grass etc.) can be used
4. Easy to maintain
When the gasholder is leaking, the leak can be found immediately, and can be repaired on ground.
5. Durable
The concrete digester can last over 30 years, and the glass fibre reinforced plastic gasholder over 10 years. When the gasholder is worn out, a new one is replaceable, so that the biogas plant can last over 30 years.
6. Excellent safety feature
When the gasholder is taken out, no biogas is left in the digester. The digester neck (1.5m in diam) is large enough to keep sufficient fresh air in the digester. So it is safe both to repair the digester inside and to replace fermentation material . When the gas pressure reaches its limit, there will be automatic gas leak, hence no damage to the plant.
7. Low cost
The Puxin Biogas Plant is composed of a concrete digester that is built with a steel mould provided by us, a glass fibre reinforced plastic gas-holder and a concrete or glass fibre reinforced plastic cover. The digester is 6 or 10 m3 of capacity. The gasholder is 1.6 m of diameter, 0.6 m of height and 1 m3 of capacity.
(1)The structure
(2) Superiority
Comparing with the traditional fixed dome type hydraulic Biogas plant, Puxin Biogas Digester has the following distinct advantages:
1) Easy to build and 100% success rate: The construction of Puxin Biogas Plant is exempt from the difficult airtight craft, so th technical difficulty is greatly decreased, and the construction perriod is greatly shortened. To build a Puxin Biogas Digester successfully, the constructers are only required to master how to assemble and disassemble the steel mould. Any workman can learn to build Puxin Biogas Digester within a day and with 100% success rate.
The construction process of Puxin Biogas Plant
A 10 m3 PUXIN biogas plant
A 6m3 PUXIN biogas plant
design
biogas technology for family size biogas plant
biogas technology for family size biogas plant
10 years experiece in this field
easy and cheap
100% guarantee safe
biogas technology for family size biogas plant
The Family size PUXIN biogas system
is composed of a 6 or 10 m3 PUXIN biogas plant, pipe routes, gas purify devices and gas appliances or small power biogas generator. Family size PUXIN biogas system is mainly applied to farmhouse or domestic house to treat livestock waste, straw, human sewage and food waste.
Family size PUXIN biogas system has the flowing
FEATURES:
1
.EASY AND QUICK TO BE BUILT
The construction of PUXIN family size biogas system is exempt from the difficult airtight craft, so the technical difficulty is greatly decreased, and the construction period is greatly shortened. To build a Puxin Biogas Digester successfully, the constructers are only required to master how to assemble and disassemble the steel mould. Any workman can learn to build PUXIN family size biogas plant within a day and with 100% success rate.
2. High reliable
The steel mould and the glass fibre reinforced plastic gasholder can be mass-produced in factories, so that any place or country can build the Puxin Biogas Plant
3. Solid organic material (straw and grass etc.) can be used
4. Easy to maintain
When the gasholder is leaking, the leak can be found immediately, and can be repaired on ground.
5. Durable
The concrete digester can last over 30 years, and the glass fibre reinforced plastic gasholder over 10 years. When the gasholder is worn out, a new one is replaceable, so that the biogas plant can last over 30 years.
6. Excellent safety feature
When the gasholder is taken out, no biogas is left in the digester. The digester neck (1.5m in diam) is large enough to keep sufficient fresh air in the digester. So it is safe both to repair the digester inside and to replace fermentation material . When the gas pressure reaches its limit, there will be automatic gas leak, hence no damage to the plant.
7. Low cost
The Puxin Biogas Plant is composed of a concrete digester that is built with a steel mould provided by us, a glass fibre reinforced plastic gas-holder and a concrete or glass fibre reinforced plastic cover. The digester is 6 or 10 m3 of capacity. The gasholder is 1.6 m of diameter, 0.6 m of height and 1 m3 of capacity.
(1)The structure
(2) Superiority
Comparing with the traditional fixed dome type hydraulic Biogas plant, Puxin Biogas Digester has the following distinct advantages:
1) Easy to build and 100% success rate: The construction of Puxin Biogas Plant is exempt from the difficult airtight craft, so th technical difficulty is greatly decreased, and the construction perriod is greatly shortened. To build a Puxin Biogas Digester successfully, the constructers are only required to master how to assemble and disassemble the steel mould. Any workman can learn to build Puxin Biogas Digester within a day and with 100% success rate.
The construction process of Puxin Biogas Plant
A 10 m3 PUXIN biogas plant
A 6m3 PUXIN biogas plant
design
10 years experiece in this field
easy and cheap
100% guarantee safe
biogas technology for family size biogas plant
The Family size PUXIN biogas system
is composed of a 6 or 10 m3 PUXIN biogas plant, pipe routes, gas purify devices and gas appliances or small power biogas generator. Family size PUXIN biogas system is mainly applied to farmhouse or domestic house to treat livestock waste, straw, human sewage and food waste.
Family size PUXIN biogas system has the flowing
FEATURES:
1
.EASY AND QUICK TO BE BUILT
The construction of PUXIN family size biogas system is exempt from the difficult airtight craft, so the technical difficulty is greatly decreased, and the construction period is greatly shortened. To build a Puxin Biogas Digester successfully, the constructers are only required to master how to assemble and disassemble the steel mould. Any workman can learn to build PUXIN family size biogas plant within a day and with 100% success rate.
2. High reliable
The steel mould and the glass fibre reinforced plastic gasholder can be mass-produced in factories, so that any place or country can build the Puxin Biogas Plant
3. Solid organic material (straw and grass etc.) can be used
4. Easy to maintain
When the gasholder is leaking, the leak can be found immediately, and can be repaired on ground.
5. Durable
The concrete digester can last over 30 years, and the glass fibre reinforced plastic gasholder over 10 years. When the gasholder is worn out, a new one is replaceable, so that the biogas plant can last over 30 years.
6. Excellent safety feature
When the gasholder is taken out, no biogas is left in the digester. The digester neck (1.5m in diam) is large enough to keep sufficient fresh air in the digester. So it is safe both to repair the digester inside and to replace fermentation material . When the gas pressure reaches its limit, there will be automatic gas leak, hence no damage to the plant.
7. Low cost
The Puxin Biogas Plant is composed of a concrete digester that is built with a steel mould provided by us, a glass fibre reinforced plastic gas-holder and a concrete or glass fibre reinforced plastic cover. The digester is 6 or 10 m3 of capacity. The gasholder is 1.6 m of diameter, 0.6 m of height and 1 m3 of capacity.
(1)The structure
(2) Superiority
Comparing with the traditional fixed dome type hydraulic Biogas plant, Puxin Biogas Digester has the following distinct advantages:
1) Easy to build and 100% success rate: The construction of Puxin Biogas Plant is exempt from the difficult airtight craft, so th technical difficulty is greatly decreased, and the construction perriod is greatly shortened. To build a Puxin Biogas Digester successfully, the constructers are only required to master how to assemble and disassemble the steel mould. Any workman can learn to build Puxin Biogas Digester within a day and with 100% success rate.
The construction process of Puxin Biogas Plant
A 10 m3 PUXIN biogas plant
A 6m3 PUXIN biogas plant
design
biogas valve
biogas valve
1.Good quality
2.Long service life
3.easy install
biogas valve
1.Good quality
2.Long service life
3.easy install
4.Brass body, Brass ball, Long service life
1.Good quality
2.Long service life
3.easy install
biogas valve
1.Good quality
2.Long service life
3.easy install
4.Brass body, Brass ball, Long service life
biogas valves
Puxin biogas valves have the following advantages:
1.Good quality
2.Long service life
3.Easy install
1.Good quality
2.Long service life
3.Easy install
biological fuel
biofuel is made from sawdust and wood chips
odorless and smokeless
biofuel can be used in many fields
it is enviromental
Biological Fuel
It is produced with sawdust and wood chips, which are dried and disinfected. Biological fuel is non-toxic and odorless, is a enviromental protectction product. It is usually used in smelting, generating electricity and heating.
Calorific value: 4200-5500cal
4% ash can be used as fertilizer
Our company is a leading manufactuer of charcoal products in China. We have good reputation on product quality.
So if you want to know much more information about charcoal products, please don't hesitate to contact me!
odorless and smokeless
biofuel can be used in many fields
it is enviromental
Biological Fuel
It is produced with sawdust and wood chips, which are dried and disinfected. Biological fuel is non-toxic and odorless, is a enviromental protectction product. It is usually used in smelting, generating electricity and heating.
Calorific value: 4200-5500cal
4% ash can be used as fertilizer
Our company is a leading manufactuer of charcoal products in China. We have good reputation on product quality.
So if you want to know much more information about charcoal products, please don't hesitate to contact me!
biological wood fuel
biofuel has long burning time
wood biofuel is no harmful smell and smokeless
using conveniently
wood biofuel enviromental
Biological Fuel
Wood biofuel is produced with sawdust and wood chips, which are dried and disinfected. Biological fuel is non-toxic and odorless, is a enviromental protectction product. It is usually used in smelting, generating electricity and heating.
Calorific value: 4200-5500cal
4% ash can be used as fertilizer
Our company is a leading manufactuer of charcoal products in China. We have good reputation on product quality.
So if you want to know much more information about charcoal products, please don't hesitate to contact me!
wood biofuel is no harmful smell and smokeless
using conveniently
wood biofuel enviromental
Biological Fuel
Wood biofuel is produced with sawdust and wood chips, which are dried and disinfected. Biological fuel is non-toxic and odorless, is a enviromental protectction product. It is usually used in smelting, generating electricity and heating.
Calorific value: 4200-5500cal
4% ash can be used as fertilizer
Our company is a leading manufactuer of charcoal products in China. We have good reputation on product quality.
So if you want to know much more information about charcoal products, please don't hesitate to contact me!
3000W Small maglev wind turbines
American maglev wind turbines
Small maglev
Light wind power turbines
Light weight
beautiful
Small maglev wind turbines
Hangzhou Shenle Technology Co., Ltd. is committed to
(1) wind energy into electricity,R & D and manufacturing Rather there Arts culture with Chinese characteristics, the landscape of wind turbine,Owns a number of patented technologies.(our engineering team will continue to design new products to meet the market demand, and pay attention to our website)
(2) production intelligent building public corridor electricity apportion device,This product development successfully solved completely corridor public electricity charges. Install this product will be massive saving electricity company charge link and labor cost.
About
Wind generator
Our wind generators are ancient Chinese culture art and modern science and technology, combining the perfect products, Strong visual and environmental photograph union, Have strong Chinese festival atmosphere of high-end products. Have China ceremoniously festal atmosphere of high-end products. Advanced design (maglev), Light weight, high efficiency and low noise.!
For our cities, villages, villas, road, tunnel, building, park, square, scenic spot, island, ships, the camps and mountainous place such as supply natural quiet green energy systems, Is a kind of energy conservation, environmental protection, landscaping of green energy.
Our mission
Since the industrial revolution, humans have already consumed much of the mineral resources, In recent years to various environment change in greenhouse gas emissions, excessive to make global warming, Cause a series of disasters, we shall review is no reflection in daily life's performance?
Everyone is the earth's people, please try your ability to energy consumption expenditure, don't forget to several thousand years later we children living environment.
As long as the earth rotates, the wind that is inexhaustible infinite energy so wind power will be benefit to global environmental efficient technology, we can in order to continuously innovation the technology but unremitting
Small maglev
Light wind power turbines
Light weight
beautiful
Small maglev wind turbines
Hangzhou Shenle Technology Co., Ltd. is committed to
(1) wind energy into electricity,R & D and manufacturing Rather there Arts culture with Chinese characteristics, the landscape of wind turbine,Owns a number of patented technologies.(our engineering team will continue to design new products to meet the market demand, and pay attention to our website)
(2) production intelligent building public corridor electricity apportion device,This product development successfully solved completely corridor public electricity charges. Install this product will be massive saving electricity company charge link and labor cost.
About
Wind generator
Our wind generators are ancient Chinese culture art and modern science and technology, combining the perfect products, Strong visual and environmental photograph union, Have strong Chinese festival atmosphere of high-end products. Have China ceremoniously festal atmosphere of high-end products. Advanced design (maglev), Light weight, high efficiency and low noise.!
For our cities, villages, villas, road, tunnel, building, park, square, scenic spot, island, ships, the camps and mountainous place such as supply natural quiet green energy systems, Is a kind of energy conservation, environmental protection, landscaping of green energy.
Our mission
Since the industrial revolution, humans have already consumed much of the mineral resources, In recent years to various environment change in greenhouse gas emissions, excessive to make global warming, Cause a series of disasters, we shall review is no reflection in daily life's performance?
Everyone is the earth's people, please try your ability to energy consumption expenditure, don't forget to several thousand years later we children living environment.
As long as the earth rotates, the wind that is inexhaustible infinite energy so wind power will be benefit to global environmental efficient technology, we can in order to continuously innovation the technology but unremitting
biomagnetic muddler,energy muddler,stainless steel muddler,VOP-010
biomagnetic muddler,energy muddler. is placed directly in any glass of liquid ,
The biomagnetic muddler , energy muddler is placed directly in any glass of liquid , warm or cold , but not boiling hot, it only take about 10 minutes to magnetically active the water .
Our products contain healthy elements, such as magnet, germanium, negative ion, far infrared and so on; product designs including all kinds of bracelets, bangles, necklaces, pendants, earrings, rings as well as magnetic strap, girdle, kneepad and insole
The biomagnetic muddler , energy muddler is placed directly in any glass of liquid , warm or cold , but not boiling hot, it only take about 10 minutes to magnetically active the water .
Our products contain healthy elements, such as magnet, germanium, negative ion, far infrared and so on; product designs including all kinds of bracelets, bangles, necklaces, pendants, earrings, rings as well as magnetic strap, girdle, kneepad and insole
biomass Briquette Machine, has unique sale points
biomass Briquette Machine, has unique sale points
1.CE Certification
2.Hot sale in Europe
3.High quality
biomass Briquette Machine, has unique sale points
Hongji charcoal/biomass briquette press can process any kinds of agro-forestry wastes into renewable bio-fuel. Biomass briquette press can make 30-80 mm solid, hexagonal or square or round cyclinder solid fuel briquettes.
Hongji biomass/charcoal briquette Press is equipped with automatic temperature controlling system. The final briquettes are cylindrical or square, whose diameter range is 30-80 mm. The main parts include forming mould, propeller, inner sleeve and heating circle. Hongji biomass briquette press can be operated 24 hours a day.
1.CE Certification
2.Hot sale in Europe
3.High quality
biomass Briquette Machine, has unique sale points
Hongji charcoal/biomass briquette press can process any kinds of agro-forestry wastes into renewable bio-fuel. Biomass briquette press can make 30-80 mm solid, hexagonal or square or round cyclinder solid fuel briquettes.
Hongji biomass/charcoal briquette Press is equipped with automatic temperature controlling system. The final briquettes are cylindrical or square, whose diameter range is 30-80 mm. The main parts include forming mould, propeller, inner sleeve and heating circle. Hongji biomass briquette press can be operated 24 hours a day.
biomass Briquette Machine, has unique sale points
biomass Briquette Machine, has unique sale points
1.CE Certification
2.Hot sale in Europe
3.High quality
biomass Briquette Machine, has unique sale points
Sawdust Briquette Machine can make stick shape wood briquette of different diameter and different shape from agro-forest wasted
Prospect of Briquette Machine:
Due to the rapid increase in the need of energy source, more people start to become interested in Biomass Briquette business. Biomass Briquette are Renewable, Eco-friendly Energy especially for agricultural countries.
Biomass Briquette investment is a best project to generate revenue from agro-forestry waste and to produce Green Energy to protect the global environment. The awareness of using Eco-friendly & Non-conventional Bio-coal / Bio-fuel is increasing day-to-day due to the increasing of the conventional fuel cost
This plant can make stick shape wood briquette of different diameter and different shape from biomass and agro-forest waste.
Raw Material to make Biomass Briquette Machine:
Any type of Agro-Forestry waste can be used. But the Moisture Content Should be Less than 12%, grain size is below 5×5mm.
Groundnut-shell Sugarcane residue Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Rice Husks Forestry wastes Wood Chips and many other Agro wastes.
Biomass Briquette Machine:
This Biomass Briquette Screw Press equipped with automatic temperature control system are designed to produce high density wood briquette from biomass. The motor can be 11kw/15kw/18.5kw-3phase-380v-50hz electrical driven motor. This machine can be operated 16 hours per day. The extruded wood briquette can be used as fuel for briquette boilers or boilers for heating. Please note: during briquetting process, there will be some smoke from the briquette machine that have to be expel to atmosphere.
1.CE Certification
2.Hot sale in Europe
3.High quality
biomass Briquette Machine, has unique sale points
Sawdust Briquette Machine can make stick shape wood briquette of different diameter and different shape from agro-forest wasted
Prospect of Briquette Machine:
Due to the rapid increase in the need of energy source, more people start to become interested in Biomass Briquette business. Biomass Briquette are Renewable, Eco-friendly Energy especially for agricultural countries.
Biomass Briquette investment is a best project to generate revenue from agro-forestry waste and to produce Green Energy to protect the global environment. The awareness of using Eco-friendly & Non-conventional Bio-coal / Bio-fuel is increasing day-to-day due to the increasing of the conventional fuel cost
This plant can make stick shape wood briquette of different diameter and different shape from biomass and agro-forest waste.
Raw Material to make Biomass Briquette Machine:
Any type of Agro-Forestry waste can be used. But the Moisture Content Should be Less than 12%, grain size is below 5×5mm.
Groundnut-shell Sugarcane residue Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Rice Husks Forestry wastes Wood Chips and many other Agro wastes.
Biomass Briquette Machine:
This Biomass Briquette Screw Press equipped with automatic temperature control system are designed to produce high density wood briquette from biomass. The motor can be 11kw/15kw/18.5kw-3phase-380v-50hz electrical driven motor. This machine can be operated 16 hours per day. The extruded wood briquette can be used as fuel for briquette boilers or boilers for heating. Please note: during briquetting process, there will be some smoke from the briquette machine that have to be expel to atmosphere.
biomass briquette fuel
High calorific value
Resistance to burn
No pollution
Green product
Substitute for wood, coal, liquied petrol gas
Material:
1. Wood waste, scobs, branch, palm tree;
2. Bean straw, wheat straw, corn straw, cotton straw, rice straw, rice husk
3. Cotton shell, peanut shell, rice shell, palm tree, coconut shell;
4. Any plants grow in the ground.
Application:
1. Home heating stoves
2. Hot water boilers and the industrial boilers,
3. Biomass power plants and so on.
Features:
1.large proportion,
2.high calorific value, resistance to burn,
3.substitute for wood, coal, liquid petrol gas, natural gas
4.no pollution
5.green product
6.develop renewable resources
7.Low-carbon Living
Resistance to burn
No pollution
Green product
Substitute for wood, coal, liquied petrol gas
Material:
1. Wood waste, scobs, branch, palm tree;
2. Bean straw, wheat straw, corn straw, cotton straw, rice straw, rice husk
3. Cotton shell, peanut shell, rice shell, palm tree, coconut shell;
4. Any plants grow in the ground.
Application:
1. Home heating stoves
2. Hot water boilers and the industrial boilers,
3. Biomass power plants and so on.
Features:
1.large proportion,
2.high calorific value, resistance to burn,
3.substitute for wood, coal, liquid petrol gas, natural gas
4.no pollution
5.green product
6.develop renewable resources
7.Low-carbon Living
biomass briquette machine making for burning
Biocoal Forming Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
biomass briquette machine
This biomass briquette machine can be used to make bio-fuel, sawdust/wood pellet, animal feedstuff, and organic fertilizer
This briquette press is mainly applicable to crude fiber granulation and biomass briquette. It can also be used to produce animal feedstuff, biological fertilizer, organic fertilizer, compound fertilizer low temperature granulator.
Model
Capacity(kg/h)
Power(kw)
Briquette size (mm)
Weight (T)
SKJ 2-200
100-160
15
Diameter 2-15
0.18
SKJ 2-250
160-260
15-18.5
0.48
SKJ 2-300
300-500
30
0.79
SKJ 3-350
400-600
37
1.6
SKJ 3-450
500-800
55
2.3
SKJ3-550A
1000-2000
90
3.2
SKJ3-550B
600-1000
75
6-30 mm diameter, 20*30mm
2.8
SKJ 3-800
2000-3000
130-160
7.6
SKJ4-1200
3000-4000
280-320
16.5
This briquette press is mainly applicable to crude fiber granulation and biomass briquette. It can also be used to produce animal feedstuff, biological fertilizer, organic fertilizer, compound fertilizer low temperature granulator.
Model
Capacity(kg/h)
Power(kw)
Briquette size (mm)
Weight (T)
SKJ 2-200
100-160
15
Diameter 2-15
0.18
SKJ 2-250
160-260
15-18.5
0.48
SKJ 2-300
300-500
30
0.79
SKJ 3-350
400-600
37
1.6
SKJ 3-450
500-800
55
2.3
SKJ3-550A
1000-2000
90
3.2
SKJ3-550B
600-1000
75
6-30 mm diameter, 20*30mm
2.8
SKJ 3-800
2000-3000
130-160
7.6
SKJ4-1200
3000-4000
280-320
16.5
biomass briquette machine
biomass briquette machine is our latest product for the rice husk and sawdust, more application and output, less energy consumin
biomass briquette machine has the following features
1) Vertical feed and directly in place
2) The mould is still and the roller is rotating, so the materials can be distributed around centrifugally.
3) Double-layer mould that can be used up or down, thus reducing the cost and increasing the efficiency,; Also they can be dual-use, high capacity and save the energy.
4) One mould with two kinds of aperture, thus it is cheaper and easy to be used.
5) Macroporous die, wire joining the circular tube, thus increasing the travel and the density.
6) Ring die, vertical structure, it is easy to be lifted install and maintained.
biomass briquette machine has the following features
1) Vertical feed and directly in place
2) The mould is still and the roller is rotating, so the materials can be distributed around centrifugally.
3) Double-layer mould that can be used up or down, thus reducing the cost and increasing the efficiency,; Also they can be dual-use, high capacity and save the energy.
4) One mould with two kinds of aperture, thus it is cheaper and easy to be used.
5) Macroporous die, wire joining the circular tube, thus increasing the travel and the density.
6) Ring die, vertical structure, it is easy to be lifted install and maintained.
biomass briquette machine
biomass briquette machine is our latest product for the rice husk and sawdust, more application and output, less energy consumin
biomass briquette machine has the following features
1) Vertical feed and directly in place
2) The mould is still and the roller is rotating, so the materials can be distributed around centrifugally.
3) Double-layer mould that can be used up or down, thus reducing the cost and increasing the efficiency,; Also they can be dual-use, high capacity and save the energy.
4) One mould with two kinds of aperture, thus it is cheaper and easy to be used.
5) Macroporous die, wire joining the circular tube, thus increasing the travel and the density.
6) Ring die, vertical structure, it is easy to be lifted install and maintained.
biomass briquette machine has the following features
1) Vertical feed and directly in place
2) The mould is still and the roller is rotating, so the materials can be distributed around centrifugally.
3) Double-layer mould that can be used up or down, thus reducing the cost and increasing the efficiency,; Also they can be dual-use, high capacity and save the energy.
4) One mould with two kinds of aperture, thus it is cheaper and easy to be used.
5) Macroporous die, wire joining the circular tube, thus increasing the travel and the density.
6) Ring die, vertical structure, it is easy to be lifted install and maintained.
biomass briquette machines electric-saving
biomass briquette machines
1.Offer spare parts. one propeller,
one set heating ring and inner sleeve
2.Final size:45-80mm
biomass briquette machines
Working principle:
Briquetting is a process that biomass is compressed under high pressure and high temperature. The self bonding of biomass to form a briquette involves the thermo-plastic flow of the biomass. The lignin content that occurs naturally in biomass is liberated under high pressure and temperature. Lignin serves as the glue in the briquetting process, thus binding,compressing the biomss to form into high density briquettes. During this process, no binder need to be used. So the ouput briquette is a type of clean and green fuel that is ideal for use in furnaces, boilers and open fires. The density of the briquettes is 1100~1300kg/m.
Quality policy
We are committed to offer the premium quality briquetting machines, which conform to the international quality norms. Therefore, we apply stringent quality checking systems and testing procedures. Our Quality Control & Assurance (QC & A) department keep a strict vigil on the entire manufacturing processes right from purchase of raw materials to the shipment of finished goods.
In order to ensure that all the products offer flawless performance, they are tested on well defined quality and performance parameters in our own quality checking laboratory.
1.Offer spare parts. one propeller,
one set heating ring and inner sleeve
2.Final size:45-80mm
biomass briquette machines
Working principle:
Briquetting is a process that biomass is compressed under high pressure and high temperature. The self bonding of biomass to form a briquette involves the thermo-plastic flow of the biomass. The lignin content that occurs naturally in biomass is liberated under high pressure and temperature. Lignin serves as the glue in the briquetting process, thus binding,compressing the biomss to form into high density briquettes. During this process, no binder need to be used. So the ouput briquette is a type of clean and green fuel that is ideal for use in furnaces, boilers and open fires. The density of the briquettes is 1100~1300kg/m.
Quality policy
We are committed to offer the premium quality briquetting machines, which conform to the international quality norms. Therefore, we apply stringent quality checking systems and testing procedures. Our Quality Control & Assurance (QC & A) department keep a strict vigil on the entire manufacturing processes right from purchase of raw materials to the shipment of finished goods.
In order to ensure that all the products offer flawless performance, they are tested on well defined quality and performance parameters in our own quality checking laboratory.
biomass briquette making machine
Biocoal Forming Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
3000W vertical wind turbine
3000w vertical wind hybrid system
1.Turbine type: spire, vertical
2. Powr range: 40w,100w,1kw,3kw,5kw
The system start wind speed is 2m/s and rated wind speed is 9m/s, the rated RPM of our generator is 130RPM, no need protect brake etc when the wind speed is more than rated wind speed, can resist 60m/s strong, wind, even if no sunshine and no wind, the system can continuum working 3 night, the light be control, depends on brightless, when the brightless is not enough, even if on day, the light will start.
1.Turbine type: spire, vertical
2. Powr range: 40w,100w,1kw,3kw,5kw
The system start wind speed is 2m/s and rated wind speed is 9m/s, the rated RPM of our generator is 130RPM, no need protect brake etc when the wind speed is more than rated wind speed, can resist 60m/s strong, wind, even if no sunshine and no wind, the system can continuum working 3 night, the light be control, depends on brightless, when the brightless is not enough, even if on day, the light will start.
biomass briquette plants for agro-forestry wastes
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team to
Our advantages of biomass briquette plants
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc. We have already got CE certificates for all of our equipments.
Our advantages of biomass briquette plants
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc. We have already got CE certificates for all of our equipments.
biomass briquette press machine
This biomass briquette machine can be used to make bio-fuel, sawdust/wood pellet, animal feedstuff, and organic fertilizer
This briquette press is mainly applicable to crude fiber granulation and biomass briquette. It can also be used to produce animal feedstuff, biological fertilizer, organic fertilizer, compound fertilizer low temperature granulator.
Model
Capacity(kg/h)
Power(kw)
Briquette size (mm)
Weight (T)
SKJ 2-200
100-160
15
Diameter 2-15
0.18
SKJ 2-250
160-260
15-18.5
0.48
SKJ 2-300
300-500
30
0.79
SKJ 3-350
400-600
37
1.6
SKJ 3-450
500-800
55
2.3
SKJ3-550A
1000-2000
90
3.2
SKJ3-550B
600-1000
75
6-30 mm diameter, 20*30mm
2.8
SKJ 3-800
2000-3000
130-160
7.6
SKJ4-1200
3000-4000
280-320
16.5
This briquette press is mainly applicable to crude fiber granulation and biomass briquette. It can also be used to produce animal feedstuff, biological fertilizer, organic fertilizer, compound fertilizer low temperature granulator.
Model
Capacity(kg/h)
Power(kw)
Briquette size (mm)
Weight (T)
SKJ 2-200
100-160
15
Diameter 2-15
0.18
SKJ 2-250
160-260
15-18.5
0.48
SKJ 2-300
300-500
30
0.79
SKJ 3-350
400-600
37
1.6
SKJ 3-450
500-800
55
2.3
SKJ3-550A
1000-2000
90
3.2
SKJ3-550B
600-1000
75
6-30 mm diameter, 20*30mm
2.8
SKJ 3-800
2000-3000
130-160
7.6
SKJ4-1200
3000-4000
280-320
16.5
biomass briquette press machine
This biomass briquette machine can be used to make bio-fuel, sawdust/wood pellet, animal feedstuff, and organic fertilizer
This briquette press is mainly applicable to crude fiber granulation and biomass briquette. It can also be used to produce animal feedstuff, biological fertilizer, organic fertilizer, compound fertilizer low temperature granulator.
Model
Capacity(kg/h)
Power(kw)
Briquette size (mm)
Weight (T)
SKJ 2-200
100-160
15
Diameter 2-15
0.18
SKJ 2-250
160-260
15-18.5
0.48
SKJ 2-300
300-500
30
0.79
SKJ 3-350
400-600
37
1.6
SKJ 3-450
500-800
55
2.3
SKJ3-550A
1000-2000
90
3.2
SKJ3-550B
600-1000
75
6-30 mm diameter, 20*30mm
2.8
SKJ 3-800
2000-3000
130-160
7.6
SKJ4-1200
3000-4000
280-320
16.5
This briquette press is mainly applicable to crude fiber granulation and biomass briquette. It can also be used to produce animal feedstuff, biological fertilizer, organic fertilizer, compound fertilizer low temperature granulator.
Model
Capacity(kg/h)
Power(kw)
Briquette size (mm)
Weight (T)
SKJ 2-200
100-160
15
Diameter 2-15
0.18
SKJ 2-250
160-260
15-18.5
0.48
SKJ 2-300
300-500
30
0.79
SKJ 3-350
400-600
37
1.6
SKJ 3-450
500-800
55
2.3
SKJ3-550A
1000-2000
90
3.2
SKJ3-550B
600-1000
75
6-30 mm diameter, 20*30mm
2.8
SKJ 3-800
2000-3000
130-160
7.6
SKJ4-1200
3000-4000
280-320
16.5
biomass briquette press
This biomass briquette machine can be used to make bio-fuel, sawdust/wood pellet, animal feedstuff, and organic fertilizer
This briquette press is mainly applicable to crude fiber granulation and biomass briquette. It can also be used to produce animal feedstuff, biological fertilizer, organic fertilizer, compound fertilizer low temperature granulator.
Model
Capacity(kg/h)
Power(kw)
Briquette size (mm)
Weight (T)
SKJ 2-200
100-160
15
Diameter 2-15
0.18
SKJ 2-250
160-260
15-18.5
0.48
SKJ 2-300
300-500
30
0.79
SKJ 3-350
400-600
37
1.6
SKJ 3-450
500-800
55
2.3
SKJ3-550A
1000-2000
90
3.2
SKJ3-550B
600-1000
75
6-30 mm diameter, 20*30mm
2.8
SKJ 3-800
2000-3000
130-160
7.6
SKJ4-1200
3000-4000
280-320
16.5
This briquette press is mainly applicable to crude fiber granulation and biomass briquette. It can also be used to produce animal feedstuff, biological fertilizer, organic fertilizer, compound fertilizer low temperature granulator.
Model
Capacity(kg/h)
Power(kw)
Briquette size (mm)
Weight (T)
SKJ 2-200
100-160
15
Diameter 2-15
0.18
SKJ 2-250
160-260
15-18.5
0.48
SKJ 2-300
300-500
30
0.79
SKJ 3-350
400-600
37
1.6
SKJ 3-450
500-800
55
2.3
SKJ3-550A
1000-2000
90
3.2
SKJ3-550B
600-1000
75
6-30 mm diameter, 20*30mm
2.8
SKJ 3-800
2000-3000
130-160
7.6
SKJ4-1200
3000-4000
280-320
16.5
biomass briquetting machine, hot selling in European
Biocoal Forming Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
Friday, April 29, 2011
biomass briquetting machine
biomass briquetting machine:It has advantages such as high density, high strength and high hardness.
biomass briquetting machine:
1. Model: 850-2
2. Reducer: ZQ850
3. Ratio: 1:31.5
4. Roller size: Φ850×436
5. Spindle speed: 14-16r/min
6. Motor power: 37kw
7. Yield: 35-40t/h
8. Overall size(m): 3.9×2.6×2.7
biomass briquetting machine:
1. Model: 850-2
2. Reducer: ZQ850
3. Ratio: 1:31.5
4. Roller size: Φ850×436
5. Spindle speed: 14-16r/min
6. Motor power: 37kw
7. Yield: 35-40t/h
8. Overall size(m): 3.9×2.6×2.7
biomass briquetting machinery
biomass briquetting machinery
1.Offer spare parts. one propeller,
one set heating ring and inner sleeve
Easy to use
biomass briquetting machinery
Working principle:
Briquetting is a process that biomass is compressed under high pressure and high temperature. The self bonding of biomass to form a briquette involves the thermo-plastic flow of the biomass. The lignin content that occurs naturally in biomass is liberated under high pressure and temperature. Lignin serves as the glue in the briquetting process, thus binding,compressing the biomss to form into high density briquettes. During this process, no binder need to be used. So the ouput briquette is a type of clean and green fuel that is ideal for use in furnaces, boilers and open fires. The density of the briquettes is 1100~1300kg/m.
Quality policy
We are committed to offer the premium quality briquetting machines, which conform to the international quality norms. Therefore, we apply stringent quality checking systems and testing procedures. Our Quality Control & Assurance (QC & A) department keep a strict vigil on the entire manufacturing processes right from purchase of raw materials to the shipment of finished goods.
In order to ensure that all the products offer flawless performance, they are tested on well defined quality and performance parameters in our own quality checking laboratory.
1.Offer spare parts. one propeller,
one set heating ring and inner sleeve
Easy to use
biomass briquetting machinery
Working principle:
Briquetting is a process that biomass is compressed under high pressure and high temperature. The self bonding of biomass to form a briquette involves the thermo-plastic flow of the biomass. The lignin content that occurs naturally in biomass is liberated under high pressure and temperature. Lignin serves as the glue in the briquetting process, thus binding,compressing the biomss to form into high density briquettes. During this process, no binder need to be used. So the ouput briquette is a type of clean and green fuel that is ideal for use in furnaces, boilers and open fires. The density of the briquettes is 1100~1300kg/m.
Quality policy
We are committed to offer the premium quality briquetting machines, which conform to the international quality norms. Therefore, we apply stringent quality checking systems and testing procedures. Our Quality Control & Assurance (QC & A) department keep a strict vigil on the entire manufacturing processes right from purchase of raw materials to the shipment of finished goods.
In order to ensure that all the products offer flawless performance, they are tested on well defined quality and performance parameters in our own quality checking laboratory.
biomass briquetting press machine
this machine shows the featurs of big capacity, low energy consumption, compact and durable.
briquetting machine are awarded 2 patents ( patent number: 200530100650.5, 200520031212.2),and show the featurs of big capacity, low energy consumption, compact and durable. Many performance data such as capacity, coal bar density, eletricity consumption and wearable degree have reached advanced level. Our newly developed stick shaping machine can be used as charcoal powder shaping machine by replacement of some spare parts.
briquetting machine are awarded 2 patents ( patent number: 200530100650.5, 200520031212.2),and show the featurs of big capacity, low energy consumption, compact and durable. Many performance data such as capacity, coal bar density, eletricity consumption and wearable degree have reached advanced level. Our newly developed stick shaping machine can be used as charcoal powder shaping machine by replacement of some spare parts.
biomass burner for wheat straw, sawdust ,pellet
Biomass Gasification power plant:
1. suitable for sawdust, wood chips, straw
2. used for industry, home
1. suitable for sawdust, wood chips, straw
2. used for industry, home
biomass forming tools By high pressure and high temperature
biomass forming tools
1.Offer spare parts. one propeller,
one set heating ring and inner sleeve
2.Final size:45-80mm
biomass forming tools
Working principle:
Briquetting is a process that biomass is compressed under high pressure and high temperature. The self bonding of biomass to form a briquette involves the thermo-plastic flow of the biomass. The lignin content that occurs naturally in biomass is liberated under high pressure and temperature. Lignin serves as the glue in the briquetting process, thus binding,compressing the biomss to form into high density briquettes. During this process, no binder need to be used. So the ouput briquette is a type of clean and green fuel that is ideal for use in furnaces, boilers and open fires. The density of the briquettes is 1100~1300kg/m.
Quality policy
We are committed to offer the premium quality briquetting machines, which conform to the international quality norms. Therefore, we apply stringent quality checking systems and testing procedures. Our Quality Control & Assurance (QC & A) department keep a strict vigil on the entire manufacturing processes right from purchase of raw materials to the shipment of finished goods.
In order to ensure that all the products offer flawless performance, they are tested on well defined quality and performance parameters in our own quality checking laboratory.
1.Offer spare parts. one propeller,
one set heating ring and inner sleeve
2.Final size:45-80mm
biomass forming tools
Working principle:
Briquetting is a process that biomass is compressed under high pressure and high temperature. The self bonding of biomass to form a briquette involves the thermo-plastic flow of the biomass. The lignin content that occurs naturally in biomass is liberated under high pressure and temperature. Lignin serves as the glue in the briquetting process, thus binding,compressing the biomss to form into high density briquettes. During this process, no binder need to be used. So the ouput briquette is a type of clean and green fuel that is ideal for use in furnaces, boilers and open fires. The density of the briquettes is 1100~1300kg/m.
Quality policy
We are committed to offer the premium quality briquetting machines, which conform to the international quality norms. Therefore, we apply stringent quality checking systems and testing procedures. Our Quality Control & Assurance (QC & A) department keep a strict vigil on the entire manufacturing processes right from purchase of raw materials to the shipment of finished goods.
In order to ensure that all the products offer flawless performance, they are tested on well defined quality and performance parameters in our own quality checking laboratory.
3000W wind turbine
1.best quality and beet price
2.maintains free
3.certificates CE ROHS ISO
WIND KING SPECIFICATION
Model
P-3000
Starting wind speed
3m/s
Cut-in wind speed
3.5m/s
Rated wind speed
13.5m/s
Rated DC voltage
24V/48V
Rated output AC voltage
220v\50Hz(110V/60Hz)
Over-speed protection
Drifting tail electromagnet brake
Engine
Permanent magnetism synchronization turbine
Rated rotating speed
280r/m
Wind energy utilization rate
0.40
Color
various
N.W.
100kg
Blade material
Fiber glass
Rotor diameter
3700mm
Rotor length
2400mm
Rated power
3000W
Packing material
Wooden case
Packing dimension
2040*575*368mm
Certificate
CE ROHS ISO9001
2.maintains free
3.certificates CE ROHS ISO
WIND KING SPECIFICATION
Model
P-3000
Starting wind speed
3m/s
Cut-in wind speed
3.5m/s
Rated wind speed
13.5m/s
Rated DC voltage
24V/48V
Rated output AC voltage
220v\50Hz(110V/60Hz)
Over-speed protection
Drifting tail electromagnet brake
Engine
Permanent magnetism synchronization turbine
Rated rotating speed
280r/m
Wind energy utilization rate
0.40
Color
various
N.W.
100kg
Blade material
Fiber glass
Rotor diameter
3700mm
Rotor length
2400mm
Rated power
3000W
Packing material
Wooden case
Packing dimension
2040*575*368mm
Certificate
CE ROHS ISO9001
biomass fuel making machine
Biocoal Forming Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
biomass fuel/ biomass particles
biomass fuel, biomass particles
biomass fuel, biomass particles
Specification:
Raw material: SPF(spruce/pine/fir wood)
Diameter: 6-8mm
Lenght: 10-30mm
Ash: ≤2(%)
Density: 1.2-1.6 (g/cm3)
Max. moisture: ≤10(%)
Min. calorific value: ≥4500 (Kcal/kg)
biomass fuel, biomass particles
Specification:
Raw material: SPF(spruce/pine/fir wood)
Diameter: 6-8mm
Lenght: 10-30mm
Ash: ≤2(%)
Density: 1.2-1.6 (g/cm3)
Max. moisture: ≤10(%)
Min. calorific value: ≥4500 (Kcal/kg)
biomass gasification gasifier DS
biomass gasification gasifier DS
1 new design
2 advanced technology
3 Feeding raw material, generating gas
4 environment pro
description
ofbiomass gasification gasifier DS
What's the generate coal gasifier ?
The coal gas producer is a equipment that use coking coal, anthracite, weak conherent charcoal as fuel, air and steam as vaporization medicinalpreparation to produce gas as heat source.
What the gas producer used for?
it is widely used in the enviroment-friendly and energy-saving technological renovation of gas-processing heating furnace, gas forging furnace, gas crucible furnace, gas mold furnace, grilled ladle gas furnace, sand resin heating gas regenerater, glass melting gas furnace, ceramic gas furnace, smoke exausting refractory kiln and tunnel kiln, as well as the renovation of furnaces that burn coal or oil, kilns, and equipment that needs heat such as metallurgy, chemical industry, allumim, fire-resistant materials, glass products and existing kiln,with very good effect.
Features:
Our coal gasifier features low investment, good applicability, convenient use, easy operation, etc. Compared with direct coal burning, coal gasifier can save 20% of the fuel. Compared with oil furnace, coal gasifier can save more than 60% of the energy. Our coal gasifier is environment-friendly with its heat efficiency and good dust and smoke removal effect.
technical parameter
biomass gasification gasifier DS
Working Principle:
Solid coal can be gasified into inflammable gases through vapor media. This coal gas is then roughly de-dusted and conveyed through a conveying pipe to burn at a nozzle. The heat produced is used to heat the thermal furnace. With the gas as the burning material, the temperature is even on the furnace. Our single stage coal gasifier is widely used as steel rolling furnace, annealing furnace, forging furnace, steel pipe furnace, glass furnace, aluminum furnace, melting furnace, cooper furnace, pottery furnace, etc.
1 new design
2 advanced technology
3 Feeding raw material, generating gas
4 environment pro
description
ofbiomass gasification gasifier DS
What's the generate coal gasifier ?
The coal gas producer is a equipment that use coking coal, anthracite, weak conherent charcoal as fuel, air and steam as vaporization medicinalpreparation to produce gas as heat source.
What the gas producer used for?
it is widely used in the enviroment-friendly and energy-saving technological renovation of gas-processing heating furnace, gas forging furnace, gas crucible furnace, gas mold furnace, grilled ladle gas furnace, sand resin heating gas regenerater, glass melting gas furnace, ceramic gas furnace, smoke exausting refractory kiln and tunnel kiln, as well as the renovation of furnaces that burn coal or oil, kilns, and equipment that needs heat such as metallurgy, chemical industry, allumim, fire-resistant materials, glass products and existing kiln,with very good effect.
Features:
Our coal gasifier features low investment, good applicability, convenient use, easy operation, etc. Compared with direct coal burning, coal gasifier can save 20% of the fuel. Compared with oil furnace, coal gasifier can save more than 60% of the energy. Our coal gasifier is environment-friendly with its heat efficiency and good dust and smoke removal effect.
technical parameter
biomass gasification gasifier DS
Working Principle:
Solid coal can be gasified into inflammable gases through vapor media. This coal gas is then roughly de-dusted and conveyed through a conveying pipe to burn at a nozzle. The heat produced is used to heat the thermal furnace. With the gas as the burning material, the temperature is even on the furnace. Our single stage coal gasifier is widely used as steel rolling furnace, annealing furnace, forging furnace, steel pipe furnace, glass furnace, aluminum furnace, melting furnace, cooper furnace, pottery furnace, etc.
biomass gasification gasifier
biomass gasification gasifier
1 new design
2 advanced technology
3 Feed material, generat gas
4 environment protection
description
ofbiomass gasification gasifier
What's the generate coal gasifier ?
The coal gas producer is a equipment that use coking coal, anthracite, weak conherent charcoal as fuel, air and steam as vaporization medicinalpreparation to produce gas as heat source.
What the gas producer used for?
it is widely used in the enviroment-friendly and energy-saving technological renovation of gas-processing heating furnace, gas forging furnace, gas crucible furnace, gas mold furnace, grilled ladle gas furnace, sand resin heating gas regenerater, glass melting gas furnace, ceramic gas furnace, smoke exausting refractory kiln and tunnel kiln, as well as the renovation of furnaces that burn coal or oil, kilns, and equipment that needs heat such as metallurgy, chemical industry, allumim, fire-resistant materials, glass products and existing kiln,with very good effect.
Features:
Our coal gasifier features low investment, good applicability, convenient use, easy operation, etc. Compared with direct coal burning, coal gasifier can save 20% of the fuel. Compared with oil furnace, coal gasifier can save more than 60% of the energy. Our coal gasifier is environment-friendly with its heat efficiency and good dust and smoke removal effect.
technical parameter
biomass gasification gasifier
Working Principle:
Solid coal can be gasified into inflammable gases through vapor media. This coal gas is then roughly de-dusted and conveyed through a conveying pipe to burn at a nozzle. The heat produced is used to heat the thermal furnace. With the gas as the burning material, the temperature is even on the furnace. Our single stage coal gasifier is widely used as steel rolling furnace, annealing furnace, forging furnace, steel pipe furnace, glass furnace, aluminum furnace, melting furnace, cooper furnace, pottery furnace, etc.
1 new design
2 advanced technology
3 Feed material, generat gas
4 environment protection
description
ofbiomass gasification gasifier
What's the generate coal gasifier ?
The coal gas producer is a equipment that use coking coal, anthracite, weak conherent charcoal as fuel, air and steam as vaporization medicinalpreparation to produce gas as heat source.
What the gas producer used for?
it is widely used in the enviroment-friendly and energy-saving technological renovation of gas-processing heating furnace, gas forging furnace, gas crucible furnace, gas mold furnace, grilled ladle gas furnace, sand resin heating gas regenerater, glass melting gas furnace, ceramic gas furnace, smoke exausting refractory kiln and tunnel kiln, as well as the renovation of furnaces that burn coal or oil, kilns, and equipment that needs heat such as metallurgy, chemical industry, allumim, fire-resistant materials, glass products and existing kiln,with very good effect.
Features:
Our coal gasifier features low investment, good applicability, convenient use, easy operation, etc. Compared with direct coal burning, coal gasifier can save 20% of the fuel. Compared with oil furnace, coal gasifier can save more than 60% of the energy. Our coal gasifier is environment-friendly with its heat efficiency and good dust and smoke removal effect.
technical parameter
biomass gasification gasifier
Working Principle:
Solid coal can be gasified into inflammable gases through vapor media. This coal gas is then roughly de-dusted and conveyed through a conveying pipe to burn at a nozzle. The heat produced is used to heat the thermal furnace. With the gas as the burning material, the temperature is even on the furnace. Our single stage coal gasifier is widely used as steel rolling furnace, annealing furnace, forging furnace, steel pipe furnace, glass furnace, aluminum furnace, melting furnace, cooper furnace, pottery furnace, etc.
biomass gasification plant for cooking
biomass gasification plant for cooking
1 High technology
2 advanced technology
3 Feeding raw material,generating gas
description
biomass gasification plant for cooking
What the gas producer used for?
1. it is widely used in the enviroment-friendly and energy-saving technological renovation of gas-processing heating furnace,
2. gas forging furnace,
3. gas crucible furnace,
4. gas mold furnace,
5. grilled ladle gas furnace, s
6. and resin heating gas regenerater,
7. glass melting gas furnace, ceramic gas furnace, smoke exausting refractory kiln and tunnel kiln,
8. as the renovation of furnaces that burn coal or oil, kilns, and equipment that needs heat such as metallurgy, chemical industry, allumim, fire-resistant materials, glass products and existing kiln,with very good effect.
What's the biomass gasification plant for cooking
?
1. The coal gas producer is a equipment that use coking coal, anthracite, weak conherent charcoal as fuel, air .
2. steam as vaporization medicinalpreparation to produce gas as heat source.
Features:
1. Our coal gasifier features low investment, good applicability, convenient use, easy operation, etc.
2. Compared with direct coal burning, coal gasifier can save 20% of the fuel.
3. Compared with oil furnace, coal gasifier can save more than 60% of the energy.
4. Our coal gasifier is environment-friendly with its heat efficiency and good dust and smoke removal effect.
technical parameter
biomass gasification plant for cooking
Working Principle:
1. This coal gas is then roughly de-dusted and conveyed through a conveying pipe to
burn at a nozzle.
2. The heat produced is used to heat the thermal furnace. With the gas as the burning
material, the temperature is even on the furnace.
1 High technology
2 advanced technology
3 Feeding raw material,generating gas
description
biomass gasification plant for cooking
What the gas producer used for?
1. it is widely used in the enviroment-friendly and energy-saving technological renovation of gas-processing heating furnace,
2. gas forging furnace,
3. gas crucible furnace,
4. gas mold furnace,
5. grilled ladle gas furnace, s
6. and resin heating gas regenerater,
7. glass melting gas furnace, ceramic gas furnace, smoke exausting refractory kiln and tunnel kiln,
8. as the renovation of furnaces that burn coal or oil, kilns, and equipment that needs heat such as metallurgy, chemical industry, allumim, fire-resistant materials, glass products and existing kiln,with very good effect.
What's the biomass gasification plant for cooking
?
1. The coal gas producer is a equipment that use coking coal, anthracite, weak conherent charcoal as fuel, air .
2. steam as vaporization medicinalpreparation to produce gas as heat source.
Features:
1. Our coal gasifier features low investment, good applicability, convenient use, easy operation, etc.
2. Compared with direct coal burning, coal gasifier can save 20% of the fuel.
3. Compared with oil furnace, coal gasifier can save more than 60% of the energy.
4. Our coal gasifier is environment-friendly with its heat efficiency and good dust and smoke removal effect.
technical parameter
biomass gasification plant for cooking
Working Principle:
1. This coal gas is then roughly de-dusted and conveyed through a conveying pipe to
burn at a nozzle.
2. The heat produced is used to heat the thermal furnace. With the gas as the burning
material, the temperature is even on the furnace.
biomass gasification power generation
The company gasifies the raw materials such as rice hull, fruit hull, saw dust, palm hull, wheat straw, cotton straw, corn straw
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow.
Introduction to biomass internal-combustion power generation system
Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc
Applicable raw matrrials:All the plants and organic wastes
The grain size of raw materials is less than 30mm in general.
The water content of the raw materials is lower than 16% in general.
Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard)
Tar content 50mg./m3(standard)
Compositions N2 50-60%
Co2 10-20%
CO 10-18%
H2 3-9%
Ch 2-6%
CnHm 0.5-3%
Other 0.5-3%
Operation data:
Auxiliary fuel:Not necessary
Start time:About 45 minutes for cold start
About 15 miutes for hot start
Operator:According to the project scale:1-2 persons for each shift
Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour
Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun.
Environment protection standara:
Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment
Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged.
Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged.
Noise:The region with noise>75 db will be reused to decrease noise influence.
Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow.
biomass gasifier for 100KW to 3MW power generation plant
biomass gasifier for power generation, such as rice husk, crop stalk, coconut husk, olive pomace, woodchips, bagasse etc
biomass gasifier for power generation specifications
Available biomass:
Agriculture and forest residues, such as rice husk, crop stalk, coconut fiber dust, palm shell, pruned fruit tree branch, wood chips twig timber, chips from timber processing factory, and so on.
Biomass gas from Fengyu's fluidized bed biomass gasifier not only can be send to internal combustion engine for electric power generation, but also can be used for household fuel to cooking or heating . It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying, or for turbine to generate power.
INDEX:
MODEL: LHC-1200
generator rated output power : 1200kw
production volume of biomass gas: 4500Nm3/hr
gas temperature of the outlet after cleaning and cooling: under 45 degree celsius
consumption of biomass fuel: 1.8-2.16 ton/hr(for rice husk)
gross weight of gasifier: 42.5ton
Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel and gasification method. The caloricity of biomass gasification gas is normally 1100-1500kcal/Nm3. (4.6-6.3MJ/Nm3).
biomass gas component:
CO 17.2%
H2 4.05%
CH4 6.82%
CmHn 1.24%
H2S --------
CO2 15.1%
O2 0.8%
N2 54.7%
biomass gasifier for power generation specifications
Available biomass:
Agriculture and forest residues, such as rice husk, crop stalk, coconut fiber dust, palm shell, pruned fruit tree branch, wood chips twig timber, chips from timber processing factory, and so on.
Biomass gas from Fengyu's fluidized bed biomass gasifier not only can be send to internal combustion engine for electric power generation, but also can be used for household fuel to cooking or heating . It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying, or for turbine to generate power.
INDEX:
MODEL: LHC-1200
generator rated output power : 1200kw
production volume of biomass gas: 4500Nm3/hr
gas temperature of the outlet after cleaning and cooling: under 45 degree celsius
consumption of biomass fuel: 1.8-2.16 ton/hr(for rice husk)
gross weight of gasifier: 42.5ton
Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel and gasification method. The caloricity of biomass gasification gas is normally 1100-1500kcal/Nm3. (4.6-6.3MJ/Nm3).
biomass gas component:
CO 17.2%
H2 4.05%
CH4 6.82%
CmHn 1.24%
H2S --------
CO2 15.1%
O2 0.8%
N2 54.7%
biomass gasifier for 1MW power plant
High efficiency gasifier for biomass power plant
Available biomass:
Agriculture and forest residues, such as rice husk, crop stalk, coconut fiber dust, palm shell, pruned fruit tree branch, wood chips twig timber, chips from timber processing factory, and so on.
Biomass gas from Fengyu's fluidized bed gasifier not only can be send to internal combustion engine for electric power generation, but also can be used for household fuel to cooking or heating . It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying.
INDEX:
MODEL: LHC-1000
generator rated output power : 1000kw
production volume of biomass gas: 3650Nm3/hr
gas temperature of the outlet after cleaning and cooling: under 45 degree celsius
consumption of biomass fuel: 1.5-1.8 ton/hr(for rice husk)
gross weight of gasifier: 38.7 ton
Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel and gasification method. The caloricity of biomass gasification gas is normally 1100-1500kcal/Nm3. (4.6-6.3MJ/Nm3).
biomass gas component:
CO 17.2%
H2 4.05%
CH4 6.82%
CmHn 1.24%
H2S --------
CO2 15.1%
O2 0.8%
Available biomass:
Agriculture and forest residues, such as rice husk, crop stalk, coconut fiber dust, palm shell, pruned fruit tree branch, wood chips twig timber, chips from timber processing factory, and so on.
Biomass gas from Fengyu's fluidized bed gasifier not only can be send to internal combustion engine for electric power generation, but also can be used for household fuel to cooking or heating . It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying.
INDEX:
MODEL: LHC-1000
generator rated output power : 1000kw
production volume of biomass gas: 3650Nm3/hr
gas temperature of the outlet after cleaning and cooling: under 45 degree celsius
consumption of biomass fuel: 1.5-1.8 ton/hr(for rice husk)
gross weight of gasifier: 38.7 ton
Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel and gasification method. The caloricity of biomass gasification gas is normally 1100-1500kcal/Nm3. (4.6-6.3MJ/Nm3).
biomass gas component:
CO 17.2%
H2 4.05%
CH4 6.82%
CmHn 1.24%
H2S --------
CO2 15.1%
O2 0.8%
biomass gasifier for 600KW power plant
High efficiency gasifier for biomass power plant
Available biomass:
Agriculture and forest residues, such as rice husk, crop stalk, coconut fiber dust, palm shell, pruned fruit tree branch, wood chips twig timber, chips from timber processing factory, and so on.
Biomass gas from Fengyu's fluidized bed gasifier not only can be send to internal combustion engine for electric power generation, but also can be used for household fuel to cooking or heating . It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying.
INDEX:
MODEL: LHC-600
generator rated output power : 600kw
production volume of biomass gas: 2250Nm3/hr
gas temperature of the outlet after cleaning and cooling: under 45 degree celsius
consumption of biomass fuel: 0.9-1.08 ton/hr(for rice husk)
gross weight of gasifier: 30.8 ton
Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel and gasification method. The caloricity of biomass gasification gas is normally 1100-1500kcal/Nm3. (4.6-6.3MJ/Nm3).
biomass gas component:
CO 17.2%
H2 4.05%
CH4 6.82%
CmHn 1.24%
H2S --------
CO2 15.1%
O2 0.8%
Available biomass:
Agriculture and forest residues, such as rice husk, crop stalk, coconut fiber dust, palm shell, pruned fruit tree branch, wood chips twig timber, chips from timber processing factory, and so on.
Biomass gas from Fengyu's fluidized bed gasifier not only can be send to internal combustion engine for electric power generation, but also can be used for household fuel to cooking or heating . It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying.
INDEX:
MODEL: LHC-600
generator rated output power : 600kw
production volume of biomass gas: 2250Nm3/hr
gas temperature of the outlet after cleaning and cooling: under 45 degree celsius
consumption of biomass fuel: 0.9-1.08 ton/hr(for rice husk)
gross weight of gasifier: 30.8 ton
Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel and gasification method. The caloricity of biomass gasification gas is normally 1100-1500kcal/Nm3. (4.6-6.3MJ/Nm3).
biomass gas component:
CO 17.2%
H2 4.05%
CH4 6.82%
CmHn 1.24%
H2S --------
CO2 15.1%
O2 0.8%
biomass gasifier for 800KW power plant
biomass gasifier for power generation, such as rice husk, crop stalk, coconut husk, olive pomace, woodchips, bagasse etc
biomass gasifier specifications:
Available biomass:
Agriculture and forest residues, such as rice husk, crop stalk, coconut fiber dust, palm shell, pruned fruit tree branch, wood chips twig timber, chips from timber processing factory, and so on.
Biomass gas from Fengyu's fluidized bed biomass gasifier not only can be send to internal combustion engine for electric power generation, but also can be used for household fuel to cooking or heating . It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying, or for turbine to generate power.
INDEX:
MODEL: LHC-800
generator rated output power : 800kw
production volume of biomass gas: 3000Nm3/hr
gas temperature of the outlet after cleaning and cooling: under 45 degree celsius
consumption of biomass fuel: 1.8-2.16 ton/hr(for rice husk)
gross weight of gasifier: 34.8ton
Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel and gasification method. The caloricity of biomass gasification gas is normally 1100-1500kcal/Nm3. (4.6-6.3MJ/Nm3).
biomass gas component:
CO 17.2%
H2 4.05%
CH4 6.82%
CmHn 1.24%
H2S --------
CO2 15.1%
O2 0.8%
N2 54.7%
biomass gasifier specifications:
Available biomass:
Agriculture and forest residues, such as rice husk, crop stalk, coconut fiber dust, palm shell, pruned fruit tree branch, wood chips twig timber, chips from timber processing factory, and so on.
Biomass gas from Fengyu's fluidized bed biomass gasifier not only can be send to internal combustion engine for electric power generation, but also can be used for household fuel to cooking or heating . It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying, or for turbine to generate power.
INDEX:
MODEL: LHC-800
generator rated output power : 800kw
production volume of biomass gas: 3000Nm3/hr
gas temperature of the outlet after cleaning and cooling: under 45 degree celsius
consumption of biomass fuel: 1.8-2.16 ton/hr(for rice husk)
gross weight of gasifier: 34.8ton
Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel and gasification method. The caloricity of biomass gasification gas is normally 1100-1500kcal/Nm3. (4.6-6.3MJ/Nm3).
biomass gas component:
CO 17.2%
H2 4.05%
CH4 6.82%
CmHn 1.24%
H2S --------
CO2 15.1%
O2 0.8%
N2 54.7%
3000w wind generator TURBINE
1.Optimal design,good balance
2.used for home appliance
3.wooden+foam packaging
Product Specification and Price List for Wind King
Wind generator part
Model
P-2000
P-3000
Name
Wind King
Wind King
Rated power
2000W
3000W
Rated DC voltage
DC 48V
DC 48V
Rated current
42A
62A
Rated speed
374r/m
310r/m
Max power
2500W
3000W
Number of blade
3 pcs
3 pcs
Starting wind speed
3m/s
3m/s
Cut-in wind speed
3.5m/s
3.5m/s
Cut-out wind speed
18m/s
18m/s
Security wind speed
45m/s
45m/s
Rated wind speed
12m/s
12m/s
Engine
Three-phase permanent Magnetic generator
Three-phase permanent Magnetic generator
Rotor diameter
3200mm
3700mm
Blade material
FRP (fiber glass reinforced plastics)
FRP (fiber glass reinforced plastics)
Output line anti-winding device
Over all three-phase exchange generator
Over all three-phase exchange generator
Over-speed wind protection
Automatically Uninstall charge protection + magnetic braking + Unloading pool brake
Automatically Uninstall charge protection + magnetic braking + Unloading pool brake
Life span
15 years
15 years
Equipment surface protection
Galvanization plastic coating
Galvanization plastic coating
Working temperature
-45°C-70°C
-45°C-70°C
N.W.
108kg
138kg
Packing material
Wooden case and foam material
Wooden case and foam material
packing dimension
1810*560*390mm
2050*580*360mm
G.W.
140kg
170kg
Price
(
USD
)
1100
1720
Tower part
Tower height
8M(zinced iron tube)
8 M(zinced iron tube)
G.W.
120kg
120kg
Price (USD)
400
400
Controlling circuit equipment
Controller&-inverter
2000W controller
2000w inverter (sine wave )
3000W controller
3000w inverter (sine wave )
Packing material
Carton box and foam material
Carton box and foam material
G.W.
30kg
30kg
PRICE (USD)
800
(controller USD380 )
1330
(controller USD620 )
Solar
Solar panel
Model choose the watts or pcs
(single crystal silicon)
100w*20pcs
100w*30pcs
panel
N.W
160kg
240kg
Price ( USD )
3800
5600
Battery
12v 200AH
4PCS
6PCS
Price ( USD )
750
1100
Total price ( USD )
6820
10150
2.used for home appliance
3.wooden+foam packaging
Product Specification and Price List for Wind King
Wind generator part
Model
P-2000
P-3000
Name
Wind King
Wind King
Rated power
2000W
3000W
Rated DC voltage
DC 48V
DC 48V
Rated current
42A
62A
Rated speed
374r/m
310r/m
Max power
2500W
3000W
Number of blade
3 pcs
3 pcs
Starting wind speed
3m/s
3m/s
Cut-in wind speed
3.5m/s
3.5m/s
Cut-out wind speed
18m/s
18m/s
Security wind speed
45m/s
45m/s
Rated wind speed
12m/s
12m/s
Engine
Three-phase permanent Magnetic generator
Three-phase permanent Magnetic generator
Rotor diameter
3200mm
3700mm
Blade material
FRP (fiber glass reinforced plastics)
FRP (fiber glass reinforced plastics)
Output line anti-winding device
Over all three-phase exchange generator
Over all three-phase exchange generator
Over-speed wind protection
Automatically Uninstall charge protection + magnetic braking + Unloading pool brake
Automatically Uninstall charge protection + magnetic braking + Unloading pool brake
Life span
15 years
15 years
Equipment surface protection
Galvanization plastic coating
Galvanization plastic coating
Working temperature
-45°C-70°C
-45°C-70°C
N.W.
108kg
138kg
Packing material
Wooden case and foam material
Wooden case and foam material
packing dimension
1810*560*390mm
2050*580*360mm
G.W.
140kg
170kg
Price
(
USD
)
1100
1720
Tower part
Tower height
8M(zinced iron tube)
8 M(zinced iron tube)
G.W.
120kg
120kg
Price (USD)
400
400
Controlling circuit equipment
Controller&-inverter
2000W controller
2000w inverter (sine wave )
3000W controller
3000w inverter (sine wave )
Packing material
Carton box and foam material
Carton box and foam material
G.W.
30kg
30kg
PRICE (USD)
800
(controller USD380 )
1330
(controller USD620 )
Solar
Solar panel
Model choose the watts or pcs
(single crystal silicon)
100w*20pcs
100w*30pcs
panel
N.W
160kg
240kg
Price ( USD )
3800
5600
Battery
12v 200AH
4PCS
6PCS
Price ( USD )
750
1100
Total price ( USD )
6820
10150
biomass gasifier for power generation 100kw to 3MW
biomass gasifier system for power generation, such as rice husk, crop stalk, coconut husk, olive pomace, woodchips, bagasse etc
biomass gasifier specifications:
Available biomass:
Agriculture and forest residues, such as rice husk, crop stalk, coconut fiber dust, palm shell, pruned fruit tree branch, wood chips twig timber, chips from timber processing factory, and so on.
Biomass gas from Fengyu's fluidized bed gasifier not only can be send to internal combustion engine for electric power generation, but also can be used for household fuel to cooking or heating . It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying.
INDEX:
MODEL: LHC-600
generator rated output power : 600kw
production volume of biomass gas: 2250Nm3/hr
gas temperature of the outlet after cleaning and cooling: under 45 degree celsius
consumption of biomass fuel: 0.9-1.08 ton/hr(for rice husk)
gross weight of gasifier: 30.8 ton
Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel and gasification method. The caloricity of biomass gasification gas is normally 1100-1500kcal/Nm3. (4.6-6.3MJ/Nm3).
biomass gas component:
CO 17.2%
H2 4.05%
CH4 6.82%
CmHn 1.24%
H2S --------
CO2 15.1%
O2 0.8%
N2 54.7%
biomass gasifier specifications:
Available biomass:
Agriculture and forest residues, such as rice husk, crop stalk, coconut fiber dust, palm shell, pruned fruit tree branch, wood chips twig timber, chips from timber processing factory, and so on.
Biomass gas from Fengyu's fluidized bed gasifier not only can be send to internal combustion engine for electric power generation, but also can be used for household fuel to cooking or heating . It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying.
INDEX:
MODEL: LHC-600
generator rated output power : 600kw
production volume of biomass gas: 2250Nm3/hr
gas temperature of the outlet after cleaning and cooling: under 45 degree celsius
consumption of biomass fuel: 0.9-1.08 ton/hr(for rice husk)
gross weight of gasifier: 30.8 ton
Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel and gasification method. The caloricity of biomass gasification gas is normally 1100-1500kcal/Nm3. (4.6-6.3MJ/Nm3).
biomass gas component:
CO 17.2%
H2 4.05%
CH4 6.82%
CmHn 1.24%
H2S --------
CO2 15.1%
O2 0.8%
N2 54.7%
biomass gasifier power plant 1MW
biomass gasifier power plant for power generation, such as rice husk, crop stalk, coconut husk, olive pomace, woodchips, bagasse
Available biomass:
Agriculture and forest residues, such as rice husk, crop stalk, coconut fiber dust, palm shell, pruned fruit tree branch, wood chips twig timber, chips from timber processing factory, and so on.
Biomass syngas from Fengyu's fluidized bed biomass gasifier not only can be send to internal combustion engine for electric power generation, but also can be used for household fuel to cooking or heating . It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying, or for turbine to generate power.
INDEX:
MODEL: LHC-1000
biomass power plant output power : 1000kw
production volume of biomass gas: 3650Nm3/hr
gas temperature of the outlet after cleaning and cooling: under 45 degree celsius
consumption of biomass fuel: 1.5-1.8 ton/hr(for rice husk)
gross weight of gasifier: 38.7 ton
Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel and gasification method. The caloricity of biomass gasification gas is normally 1100-1500kcal/Nm3. (4.6-6.3MJ/Nm3).
biomass gas component:
CO 17.2%
H2 4.05%
CH4 6.82%
CmHn 1.24%
H2S --------
CO2 15.1%
O2 0.8%
N2 54.7%
Available biomass:
Agriculture and forest residues, such as rice husk, crop stalk, coconut fiber dust, palm shell, pruned fruit tree branch, wood chips twig timber, chips from timber processing factory, and so on.
Biomass syngas from Fengyu's fluidized bed biomass gasifier not only can be send to internal combustion engine for electric power generation, but also can be used for household fuel to cooking or heating . It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying, or for turbine to generate power.
INDEX:
MODEL: LHC-1000
biomass power plant output power : 1000kw
production volume of biomass gas: 3650Nm3/hr
gas temperature of the outlet after cleaning and cooling: under 45 degree celsius
consumption of biomass fuel: 1.5-1.8 ton/hr(for rice husk)
gross weight of gasifier: 38.7 ton
Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel and gasification method. The caloricity of biomass gasification gas is normally 1100-1500kcal/Nm3. (4.6-6.3MJ/Nm3).
biomass gas component:
CO 17.2%
H2 4.05%
CH4 6.82%
CmHn 1.24%
H2S --------
CO2 15.1%
O2 0.8%
N2 54.7%
biomass gasifier power plant
1.cheap price,corrosion resistant
2.good quality,
3.easy handle
Firewood gasifier,biomass gasifier,small gasifier for family
Firewood gasifier,biomass gasifier,small gasifier for family need,biomass gasifier power plant
Firewood gasifier. Biomass furnace,biomass stove.biomass gasification stove.
This biomass gasifier can make all kinds of all kinds of biomass, such as wood stick, stalk, rice husk, sawdust, and so on into gas. After one minute, you can get the gas to cook or get warm for hot water. And this machine is environment-protective, and energy saving; only 2-4kg raw material can satisfy your everyday use.
Every 1 kg raw material can produce 2.1m3 gas. So 2.5-4 kg raw material can produce gas which can use 60-180minutes.
contact: MS. Sally Gao
HP:0086 15238020676
2.good quality,
3.easy handle
Firewood gasifier,biomass gasifier,small gasifier for family
Firewood gasifier,biomass gasifier,small gasifier for family need,biomass gasifier power plant
Firewood gasifier. Biomass furnace,biomass stove.biomass gasification stove.
This biomass gasifier can make all kinds of all kinds of biomass, such as wood stick, stalk, rice husk, sawdust, and so on into gas. After one minute, you can get the gas to cook or get warm for hot water. And this machine is environment-protective, and energy saving; only 2-4kg raw material can satisfy your everyday use.
Every 1 kg raw material can produce 2.1m3 gas. So 2.5-4 kg raw material can produce gas which can use 60-180minutes.
contact: MS. Sally Gao
HP:0086 15238020676
biomass gasifier power plant
1.cheap price
2. eash handle
3.good quality
4.hot saleFirewood gasifier,biomass gasifier,small gasifier for family need,bioma
1.cheap price
2. eash handle
3.good quality
4.hot sale Firewood gasifier,biomass gasifier,small gasifier for family need,biomass gasifier power plant
Firewood gasifier. Biomass furnace,biomass stove.biomass gasification stove.
This biomass gasifier can make all kinds of all kinds of biomass, such as wood stick, stalk, rice husk, sawdust, and so on into gas. After one minute, you can get the gas to cook or get warm for hot water. And this machine is environment-protective, and energy saving; only 2-4kg raw material can satisfy your everyday use.
Every 1 kg raw material can produce 2.1m3 gas. So 2.5-4 kg raw material can produce gas which can use 60-180minutes.
contact: MS. Sally Gao
HP:0086 15238020676
2. eash handle
3.good quality
4.hot saleFirewood gasifier,biomass gasifier,small gasifier for family need,bioma
1.cheap price
2. eash handle
3.good quality
4.hot sale Firewood gasifier,biomass gasifier,small gasifier for family need,biomass gasifier power plant
Firewood gasifier. Biomass furnace,biomass stove.biomass gasification stove.
This biomass gasifier can make all kinds of all kinds of biomass, such as wood stick, stalk, rice husk, sawdust, and so on into gas. After one minute, you can get the gas to cook or get warm for hot water. And this machine is environment-protective, and energy saving; only 2-4kg raw material can satisfy your everyday use.
Every 1 kg raw material can produce 2.1m3 gas. So 2.5-4 kg raw material can produce gas which can use 60-180minutes.
contact: MS. Sally Gao
HP:0086 15238020676
biomass gasifier
1.cheap price
2.good quality
3.easy handle
Firewood gasifier,biomass gasifier,small gasifier for family need
1.cheap price
2.good quality
3.easy handle
Firewood gasifier,biomass gasifier,small gasifier for family need
Firewood gasifier. Biomass furnace,biomass stove.biomass gasification stove.
This biomass gasifier can make all kinds of all kinds of biomass, such as wood stick, stalk, rice husk, sawdust, and so on into gas. After one minute, you can get the gas to cook or get warm for hot water. And this machine is environment-protective, and energy saving; only 2-4kg raw material can satisfy your everyday use.
Every 1 kg raw material can produce 2.1m3 gas. So 2.5-4 kg raw material can produce gas which can use 60-180minutes.
contact: MS. Sally Gao
HP:0086 15238020676
2.good quality
3.easy handle
Firewood gasifier,biomass gasifier,small gasifier for family need
1.cheap price
2.good quality
3.easy handle
Firewood gasifier,biomass gasifier,small gasifier for family need
Firewood gasifier. Biomass furnace,biomass stove.biomass gasification stove.
This biomass gasifier can make all kinds of all kinds of biomass, such as wood stick, stalk, rice husk, sawdust, and so on into gas. After one minute, you can get the gas to cook or get warm for hot water. And this machine is environment-protective, and energy saving; only 2-4kg raw material can satisfy your everyday use.
Every 1 kg raw material can produce 2.1m3 gas. So 2.5-4 kg raw material can produce gas which can use 60-180minutes.
contact: MS. Sally Gao
HP:0086 15238020676
biomass machine
biomass machine
biomass pellet machine
biomass fuel making machine
MS Series Sawdust Machine( sawdust cutting machine, sawdust grinding mill, sawdust granulation machine,
sawdust Crusher) is a kind of special equipment to produce high quality sawdust. Widely used in paper making,
edible fungus, mechanism of charcoal, Particieboard, wood particle board,
High density board, In fiber board and other industrial production inventories section and the single wood powder (sawdust) production base,
the mainly raw materials of this cutting machine is wood and branch. The MS series machine using low or high voltage motor,
Large sawdust machine (wood cutting machine), disc wood cutting machine, have two types,
a pulley transmission and the straight association-like drive. Level and tilt for the feeding ways. Furthermore, have up and down for discharge.
biomass pellet machine
biomass fuel making machine
MS Series Sawdust Machine( sawdust cutting machine, sawdust grinding mill, sawdust granulation machine,
sawdust Crusher) is a kind of special equipment to produce high quality sawdust. Widely used in paper making,
edible fungus, mechanism of charcoal, Particieboard, wood particle board,
High density board, In fiber board and other industrial production inventories section and the single wood powder (sawdust) production base,
the mainly raw materials of this cutting machine is wood and branch. The MS series machine using low or high voltage motor,
Large sawdust machine (wood cutting machine), disc wood cutting machine, have two types,
a pulley transmission and the straight association-like drive. Level and tilt for the feeding ways. Furthermore, have up and down for discharge.
biomass particles
biomass fuel, biomass particles
biomass fuel, biomass particles
Specification:
Raw material: SPF(spruce/pine/fir wood)
Diameter: 6-8mm
Lenght: 10-30mm
Ash: ≤2(%)
Density: 1.2-1.6 (g/cm3)
Max. moisture: ≤10(%)
Min. calorific value: ≥4500 (Kcal/kg)
biomass fuel, biomass particles
Specification:
Raw material: SPF(spruce/pine/fir wood)
Diameter: 6-8mm
Lenght: 10-30mm
Ash: ≤2(%)
Density: 1.2-1.6 (g/cm3)
Max. moisture: ≤10(%)
Min. calorific value: ≥4500 (Kcal/kg)
biomass particles
biomass particles/biomass fuel/biomass energy
biomass particles, biomass fuel, biomass powder
diameter: 8-10mm
length:15-20mm
Attn:miss christina
Specification:
Raw material: SPF(spruce/pine/fir wood)
Diameter: 6-8mm
Lenght: 10-30mm
Ash: ≤2(%)
Density: 1.2-1.6 (g/cm3)
Max. moisture: ≤10(%)
Min. calorific value: ≥4500 (Kcal/kg)
biomass particles, biomass fuel, biomass powder
diameter: 8-10mm
length:15-20mm
Attn:miss christina
Specification:
Raw material: SPF(spruce/pine/fir wood)
Diameter: 6-8mm
Lenght: 10-30mm
Ash: ≤2(%)
Density: 1.2-1.6 (g/cm3)
Max. moisture: ≤10(%)
Min. calorific value: ≥4500 (Kcal/kg)
biomass pellet machine with CE
sawdust pellet machine can make pellets as biomass fuel in boiler. The pellets can replace coal and other non-renewable energy.
(1) sawdust Pellet machine (flat die pellet mill) is our patent products with CE certificate. It can make pellets as biomass fuel in boiler. The pellets can replace coal and other non-renewable energy. The raw material may be wood chips,sawdust, leaves, branches, corn stalk, cotton stalk, sunflower husk, rice husk and other agricultural waste.
(2) It is a simple complete line of pelleting unit in the picture. It includes
hammer mill, mixer, pellet mill (SKJ3-450) and cooler. The capacity is 500-800KG/H.
If you are interested in this simple line, please do not hesitate to contact me and we will reply you as soon as possible.
Welcome to our company to check our machines!
Wendy
Mp: 00 86 152 5412 3292
Tel: 00 86 531 8348 3996
Fax: 00 86 531 8348 3378
(1) sawdust Pellet machine (flat die pellet mill) is our patent products with CE certificate. It can make pellets as biomass fuel in boiler. The pellets can replace coal and other non-renewable energy. The raw material may be wood chips,sawdust, leaves, branches, corn stalk, cotton stalk, sunflower husk, rice husk and other agricultural waste.
(2) It is a simple complete line of pelleting unit in the picture. It includes
hammer mill, mixer, pellet mill (SKJ3-450) and cooler. The capacity is 500-800KG/H.
If you are interested in this simple line, please do not hesitate to contact me and we will reply you as soon as possible.
Welcome to our company to check our machines!
Wendy
Mp: 00 86 152 5412 3292
Tel: 00 86 531 8348 3996
Fax: 00 86 531 8348 3378
biomass pellet making machine with CE
1) CE certificate
2) especially designed for hard wood, rice husk and so on
3) pellets with diameter 4-10mm
4)bigger pressure
pellet making machine instruction
(1) pellet making machine can turn biomass into pellets. Pellets are burned in pellet stoves to heat homes, in pellet boilers for heat, hot water (and pool heaters) and for generating electricity. We feel that the products we provide are an ecological and economical solution for people who use pellets for heat or power. The advantages to making your own pellets are many. You can use scrap biomass materials that you have around your home to make your own pellets. Save money and have a ready supply of pellets by using wood scraps, leaves, grass clippings and yard waste. This is a great way to use up organic waste you might otherwise throw away. You will love keeping your house toasty warm all winter for free!
(2) technical parameter
Specification
Capacity
Power: 90KW
Approval: CE
Weight:5T
Pellet diameter:4-10mm
Auto-lubrication system
For soft wood, grass, stalk, paper etc agro/forest waste:
1-1.5 T/Hour
For rice hask and hard wood: 0.8-1.2 T/H
Looking forward to yor inquiry. Thank you.
Yours sincerely,
Wendy (Miss wang)
Mobile: 00 86 152 5412 3292
Tel: 00 86 531 83483996
Fax: 00 86 531 83483378
2) especially designed for hard wood, rice husk and so on
3) pellets with diameter 4-10mm
4)bigger pressure
pellet making machine instruction
(1) pellet making machine can turn biomass into pellets. Pellets are burned in pellet stoves to heat homes, in pellet boilers for heat, hot water (and pool heaters) and for generating electricity. We feel that the products we provide are an ecological and economical solution for people who use pellets for heat or power. The advantages to making your own pellets are many. You can use scrap biomass materials that you have around your home to make your own pellets. Save money and have a ready supply of pellets by using wood scraps, leaves, grass clippings and yard waste. This is a great way to use up organic waste you might otherwise throw away. You will love keeping your house toasty warm all winter for free!
(2) technical parameter
Specification
Capacity
Power: 90KW
Approval: CE
Weight:5T
Pellet diameter:4-10mm
Auto-lubrication system
For soft wood, grass, stalk, paper etc agro/forest waste:
1-1.5 T/Hour
For rice hask and hard wood: 0.8-1.2 T/H
Looking forward to yor inquiry. Thank you.
Yours sincerely,
Wendy (Miss wang)
Mobile: 00 86 152 5412 3292
Tel: 00 86 531 83483996
Fax: 00 86 531 83483378
300KW Wind turbine blades
Company producing a variety of models of 200W-300KW wind turbine blades,
We can produce according to your drawing processing
C
Company producing a variety of models of 200W-150KW wind turbine blades,
We can produce according to your drawing processing
Can be production according to your samples.
Can customize the horizontal axis, vertical axis, FRP, carbon fiber, various types of wind turbine blades
Any question,please contact us at any time.
Thanks and best regards
--
We can produce according to your drawing processing
C
Company producing a variety of models of 200W-150KW wind turbine blades,
We can produce according to your drawing processing
Can be production according to your samples.
Can customize the horizontal axis, vertical axis, FRP, carbon fiber, various types of wind turbine blades
Any question,please contact us at any time.
Thanks and best regards
--
Thursday, April 28, 2011
biomass pellet making machine with CE
1 CE certificate
2 especially designed for hard wood, rice husk and so on
3pellets with diameter 4-10mm
4Capacity:1-1.5T/H
pellet making machine
(1) pellet making machine can turn biomass into pellets. Pellets are burned in pellet stoves to heat homes, in pellet boilers for heat, hot water (and pool heaters) and for generating electricity. We feel that the products we provide are an ecological and economical solution for people who use pellets for heat or power. The advantages to making your own pellets are many. You can use scrap biomass materials that you have around your home to make your own pellets. Save money and have a ready supply of pellets by using wood scraps, leaves, grass clippings and yard waste. This is a great way to use up organic waste you might otherwise throw away. You will love keeping your house toasty warm all winter for free!
(2) technical parameter
Specification
Capacity
Power: 90KW
Approval: CE
Weight:5T
Pellet diameter:4-10mm
Auto-lubrication system
For soft wood, grass, stalk, paper etc agro/forest waste:
1-1.5 T/Hour
For rice hask and hard wood: 0.8-1.2 T/H
Looking forward to yor inquiry. Thank you.
Yours sincerely,
Wendy (Miss wang)
Mobile: 00 86 152 5412 3292
Tel: 00 86 531 83483996
Fax: 00 86 531 83483378
2 especially designed for hard wood, rice husk and so on
3pellets with diameter 4-10mm
4Capacity:1-1.5T/H
pellet making machine
(1) pellet making machine can turn biomass into pellets. Pellets are burned in pellet stoves to heat homes, in pellet boilers for heat, hot water (and pool heaters) and for generating electricity. We feel that the products we provide are an ecological and economical solution for people who use pellets for heat or power. The advantages to making your own pellets are many. You can use scrap biomass materials that you have around your home to make your own pellets. Save money and have a ready supply of pellets by using wood scraps, leaves, grass clippings and yard waste. This is a great way to use up organic waste you might otherwise throw away. You will love keeping your house toasty warm all winter for free!
(2) technical parameter
Specification
Capacity
Power: 90KW
Approval: CE
Weight:5T
Pellet diameter:4-10mm
Auto-lubrication system
For soft wood, grass, stalk, paper etc agro/forest waste:
1-1.5 T/Hour
For rice hask and hard wood: 0.8-1.2 T/H
Looking forward to yor inquiry. Thank you.
Yours sincerely,
Wendy (Miss wang)
Mobile: 00 86 152 5412 3292
Tel: 00 86 531 83483996
Fax: 00 86 531 83483378
biomass pellets production line(1ton/h,2ton/h capacity)
biomass pellets production line:
1.CE certification
2.Easy to operate
3.Professional installation team
4.Best after-se
biomass pellets production line:
Our Pellet Mill is mainly used for making crude fiber materials into pellets. The materials can be sawdust, rice husk, cotton stalk, cottonseed skins, weeds and crop stalks and other plant wastes, especially low-bonding and unformed materials. It may also be applicable to biological fertilizer, organic manure as well as fertilizer for low-temperature granulation.
The machine accepts the dry materials(The moisture of raw materials is not less than the national standard of 14% ). Differential and universal joint driver is adopted. Both the motor or diesel engine are OK.
Organic fertilizer, inorganic fertilizer,biological organic fertilizer can be produced. The processed products are ball granule with uniform size. Its fluidity and solubility are good, the intensity of products is high and the fluidity is good.
The production line: crushing---drying---pelleting---pellets
the fianl products
the spare parts
1.CE certification
2.Easy to operate
3.Professional installation team
4.Best after-se
biomass pellets production line:
Our Pellet Mill is mainly used for making crude fiber materials into pellets. The materials can be sawdust, rice husk, cotton stalk, cottonseed skins, weeds and crop stalks and other plant wastes, especially low-bonding and unformed materials. It may also be applicable to biological fertilizer, organic manure as well as fertilizer for low-temperature granulation.
The machine accepts the dry materials(The moisture of raw materials is not less than the national standard of 14% ). Differential and universal joint driver is adopted. Both the motor or diesel engine are OK.
Organic fertilizer, inorganic fertilizer,biological organic fertilizer can be produced. The processed products are ball granule with uniform size. Its fluidity and solubility are good, the intensity of products is high and the fluidity is good.
The production line: crushing---drying---pelleting---pellets
the fianl products
the spare parts
biomass pellets production line(1ton/h,2ton/h capacity)
1.CE certification
2.Easy to operate
3.Professional installation team
4.Best after-service
biomass pellets production line:
Our Pellet Mill is mainly used for making crude fiber materials into pellets. The materials can be sawdust, rice husk, cotton stalk, cottonseed skins, weeds and crop stalks and other plant wastes, especially low-bonding and unformed materials. It may also be applicable to biological fertilizer, organic manure as well as fertilizer for low-temperature granulation.
The machine accepts the dry materials(The moisture of raw materials is not less than the national standard of 14% ). Differential and universal joint driver is adopted. Both the motor or diesel engine are OK.
Organic fertilizer, inorganic fertilizer,biological organic fertilizer can be produced. The processed products are ball granule with uniform size. Its fluidity and solubility are good, the intensity of products is high and the fluidity is good.
The production line: crushing---drying---pelleting---pellets
2.Easy to operate
3.Professional installation team
4.Best after-service
biomass pellets production line:
Our Pellet Mill is mainly used for making crude fiber materials into pellets. The materials can be sawdust, rice husk, cotton stalk, cottonseed skins, weeds and crop stalks and other plant wastes, especially low-bonding and unformed materials. It may also be applicable to biological fertilizer, organic manure as well as fertilizer for low-temperature granulation.
The machine accepts the dry materials(The moisture of raw materials is not less than the national standard of 14% ). Differential and universal joint driver is adopted. Both the motor or diesel engine are OK.
Organic fertilizer, inorganic fertilizer,biological organic fertilizer can be produced. The processed products are ball granule with uniform size. Its fluidity and solubility are good, the intensity of products is high and the fluidity is good.
The production line: crushing---drying---pelleting---pellets
biomass stove for cooking and heating
biomass stove for cooking and heating
1 new design
2 advanced technology
3 Feeding raw material,generating gas
4 environment
description
biomass stove for cooking and heating
What's the generate coal gasifier ?
1. The coal gas producer is a equipment that use coking coal, anthracite, weak conherent charcoal as fuel, air .
2. steam as vaporization medicinalpreparation to produce gas as heat source.
What the gas producer used for?
1. it is widely used in the enviroment-friendly and energy-saving technological renovation of gas-processing heating furnace,
2. gas forging furnace,
3. gas crucible furnace,
4. gas mold furnace,
5. grilled ladle gas furnace, s
6. and resin heating gas regenerater,
7. glass melting gas furnace, ceramic gas furnace, smoke exausting refractory kiln and tunnel kiln,
8. as the renovation of furnaces that burn coal or oil, kilns, and equipment that needs heat such as metallurgy, chemical industry, allumim, fire-resistant materials, glass products and existing kiln,with very good effect.
Features:
1. Our coal gasifier features low investment, good applicability, convenient use, easy operation, etc.
2. Compared with direct coal burning, coal gasifier can save 20% of the fuel.
3. Compared with oil furnace, coal gasifier can save more than 60% of the energy.
4. Our coal gasifier is environment-friendly with its heat efficiency and good dust and smoke removal effect.
technical parameter
biomass stove for cooking and heating
Working Principle:
1. This coal gas is then roughly de-dusted and conveyed through a conveying pipe to burn at a nozzle.
2. The heat produced is used to heat the thermal furnace. With the gas as the burning material, the temperature is even on the furnace.
1 new design
2 advanced technology
3 Feeding raw material,generating gas
4 environment
description
biomass stove for cooking and heating
What's the generate coal gasifier ?
1. The coal gas producer is a equipment that use coking coal, anthracite, weak conherent charcoal as fuel, air .
2. steam as vaporization medicinalpreparation to produce gas as heat source.
What the gas producer used for?
1. it is widely used in the enviroment-friendly and energy-saving technological renovation of gas-processing heating furnace,
2. gas forging furnace,
3. gas crucible furnace,
4. gas mold furnace,
5. grilled ladle gas furnace, s
6. and resin heating gas regenerater,
7. glass melting gas furnace, ceramic gas furnace, smoke exausting refractory kiln and tunnel kiln,
8. as the renovation of furnaces that burn coal or oil, kilns, and equipment that needs heat such as metallurgy, chemical industry, allumim, fire-resistant materials, glass products and existing kiln,with very good effect.
Features:
1. Our coal gasifier features low investment, good applicability, convenient use, easy operation, etc.
2. Compared with direct coal burning, coal gasifier can save 20% of the fuel.
3. Compared with oil furnace, coal gasifier can save more than 60% of the energy.
4. Our coal gasifier is environment-friendly with its heat efficiency and good dust and smoke removal effect.
technical parameter
biomass stove for cooking and heating
Working Principle:
1. This coal gas is then roughly de-dusted and conveyed through a conveying pipe to burn at a nozzle.
2. The heat produced is used to heat the thermal furnace. With the gas as the burning material, the temperature is even on the furnace.
biomass stove for pellet and coal
biomass stove for pellet and coal
sepcifical for coal,pellet,wood,straw,etc.
smokeless,no tar,1.5kg firewood can last 1-2hour
Main Features and its Performance:
The machine uses biomass as fuel and is free of smoke and tar, while burning effectively. It is characterized by its strong and adjustable flame, low emission, and high thermal effectiveness and can be lighted directly and fast without using electricity.
It is of thermal insulation, which improves its combustion performance to make the most of the heat. It is pollution-free, so using it helps to improve the ecologic environment, and indoor air quality,which does good to people’s health. It is designed to have an elegant appearance and is of fire-resistance, of oxidation resistance and firm, so it can be
used for a very long time. Besides, it is so small and light that it can be moved easily. Because of those features, it is really user-friendly and easy to be maintained.
Design
1. Our stoves are elaborately designed and of elegant appearance. They quite fit for rural use for a large furnace plate that can be used as table.
2. The secondary air inlet is designed in proportion with the size of the hearth by aero hydromechanics theory to control the intake of air. The flame swirls towards the center of the furnace under the influence of aero hydromechanics, thus it becomes strong and the mixing air can be burned sufficiently so as to meet smoke dust emissions standards.
3. The design of secondary air inlet increases the thermal efficiency by more than 10%.
4. Easy-open feeder decreases the work strength. If you want to do more cooking, you can open the cover easily and add burning material,which avoids smoke pollution compared with traditional ways of burning.
5. Our stoves are of proper structure, of excellent air tightness, free of smoke, environmentally friendly and healthful, thus they can decrease disease rate.
6. Users can see the burning through the peer hole.
7. The furnace core is made of fire-proof material to prolong its use life.
8. There is a handle on the stove. Ashes can be got out easily by pushing and pulling the handle only.
9. There is a chock. Flame force can be adjusted by it accordingly.
10. The ash holder is big, avoiding frequent cleanup of ash.
Manufacturing
Our stoves are made of brand-new steel of excellent quality, and the jerry-buildings are strictly forbidden.
2.All spare parts are made by ourselves, which gives a strong assurance to the quality.
3.We use the gas shielded welding which can make sure the joints are smooth and firm.
4. The car spray of craft of the lacquer that bake reaches on the face plate of furnace, bring brand-new visual sense to enjoy for kitchen life undoubtedly.
sepcifical for coal,pellet,wood,straw,etc.
smokeless,no tar,1.5kg firewood can last 1-2hour
Main Features and its Performance:
The machine uses biomass as fuel and is free of smoke and tar, while burning effectively. It is characterized by its strong and adjustable flame, low emission, and high thermal effectiveness and can be lighted directly and fast without using electricity.
It is of thermal insulation, which improves its combustion performance to make the most of the heat. It is pollution-free, so using it helps to improve the ecologic environment, and indoor air quality,which does good to people’s health. It is designed to have an elegant appearance and is of fire-resistance, of oxidation resistance and firm, so it can be
used for a very long time. Besides, it is so small and light that it can be moved easily. Because of those features, it is really user-friendly and easy to be maintained.
Design
1. Our stoves are elaborately designed and of elegant appearance. They quite fit for rural use for a large furnace plate that can be used as table.
2. The secondary air inlet is designed in proportion with the size of the hearth by aero hydromechanics theory to control the intake of air. The flame swirls towards the center of the furnace under the influence of aero hydromechanics, thus it becomes strong and the mixing air can be burned sufficiently so as to meet smoke dust emissions standards.
3. The design of secondary air inlet increases the thermal efficiency by more than 10%.
4. Easy-open feeder decreases the work strength. If you want to do more cooking, you can open the cover easily and add burning material,which avoids smoke pollution compared with traditional ways of burning.
5. Our stoves are of proper structure, of excellent air tightness, free of smoke, environmentally friendly and healthful, thus they can decrease disease rate.
6. Users can see the burning through the peer hole.
7. The furnace core is made of fire-proof material to prolong its use life.
8. There is a handle on the stove. Ashes can be got out easily by pushing and pulling the handle only.
9. There is a chock. Flame force can be adjusted by it accordingly.
10. The ash holder is big, avoiding frequent cleanup of ash.
Manufacturing
Our stoves are made of brand-new steel of excellent quality, and the jerry-buildings are strictly forbidden.
2.All spare parts are made by ourselves, which gives a strong assurance to the quality.
3.We use the gas shielded welding which can make sure the joints are smooth and firm.
4. The car spray of craft of the lacquer that bake reaches on the face plate of furnace, bring brand-new visual sense to enjoy for kitchen life undoubtedly.
biomass stove
biomass stove
sepcifical for coal,pellet,wood,straw,etc.
smokeless,no tar,1.5kg firewood can last 1-2hour
The Biomass Stove is sepcifical for coal,pellet,wood,straw,etc.
Main Features and its Performance:
The machine uses biomass as fuel and is free of smoke and tar, while burning effectively. It is characterized by its strong and adjustable flame, low emission, and high thermal effectiveness and can be lighted directly and fast without using electricity.
It is of thermal insulation, which improves its combustion performance to make the most of the heat. It is pollution-free, so using it helps to improve the ecologic environment, and indoor air quality,which does good to people’s health. It is designed to have an elegant appearance and is of fire-resistance, of oxidation resistance and firm, so it can be
used for a very long time. Besides, it is so small and light that it can be moved easily. Because of those features, it is really user-friendly and easy to be maintained.
Design
1. Our stoves are elaborately designed and of elegant appearance. They quite fit for rural use for a large furnace plate that can be used as table.
2. The secondary air inlet is designed in proportion with the size of the hearth by aero hydromechanics theory to control the intake of air. The flame swirls towards the center of the furnace under the influence of aero hydromechanics, thus it becomes strong and the mixing air can be burned sufficiently so as to meet smoke dust emissions standards.
3. The design of secondary air inlet increases the thermal efficiency by more than 10%.
4. Easy-open feeder decreases the work strength. If you want to do more cooking, you can open the cover easily and add burning material,which avoids smoke pollution compared with traditional ways of burning.
5. Our stoves are of proper structure, of excellent air tightness, free of smoke, environmentally friendly and healthful, thus they can decrease disease rate.
6. Users can see the burning through the peer hole.
7. The furnace core is made of fire-proof material to prolong its use life.
8. There is a handle on the stove. Ashes can be got out easily by pushing and pulling the handle only.
9. There is a chock. Flame force can be adjusted by it accordingly.
10. The ash holder is big, avoiding frequent cleanup of ash.
Manufacturing
Our stoves are made of brand-new steel of excellent quality, and the jerry-buildings are strictly forbidden.
2.All spare parts are made by ourselves, which gives a strong assurance to the quality.
3.We use the gas shielded welding which can make sure the joints are smooth and firm.
4. The car spray of craft of the lacquer that bake reaches on the face plate of furnace, bring brand-new visual sense to enjoy for kitchen life undoubtedly.
sepcifical for coal,pellet,wood,straw,etc.
smokeless,no tar,1.5kg firewood can last 1-2hour
The Biomass Stove is sepcifical for coal,pellet,wood,straw,etc.
Main Features and its Performance:
The machine uses biomass as fuel and is free of smoke and tar, while burning effectively. It is characterized by its strong and adjustable flame, low emission, and high thermal effectiveness and can be lighted directly and fast without using electricity.
It is of thermal insulation, which improves its combustion performance to make the most of the heat. It is pollution-free, so using it helps to improve the ecologic environment, and indoor air quality,which does good to people’s health. It is designed to have an elegant appearance and is of fire-resistance, of oxidation resistance and firm, so it can be
used for a very long time. Besides, it is so small and light that it can be moved easily. Because of those features, it is really user-friendly and easy to be maintained.
Design
1. Our stoves are elaborately designed and of elegant appearance. They quite fit for rural use for a large furnace plate that can be used as table.
2. The secondary air inlet is designed in proportion with the size of the hearth by aero hydromechanics theory to control the intake of air. The flame swirls towards the center of the furnace under the influence of aero hydromechanics, thus it becomes strong and the mixing air can be burned sufficiently so as to meet smoke dust emissions standards.
3. The design of secondary air inlet increases the thermal efficiency by more than 10%.
4. Easy-open feeder decreases the work strength. If you want to do more cooking, you can open the cover easily and add burning material,which avoids smoke pollution compared with traditional ways of burning.
5. Our stoves are of proper structure, of excellent air tightness, free of smoke, environmentally friendly and healthful, thus they can decrease disease rate.
6. Users can see the burning through the peer hole.
7. The furnace core is made of fire-proof material to prolong its use life.
8. There is a handle on the stove. Ashes can be got out easily by pushing and pulling the handle only.
9. There is a chock. Flame force can be adjusted by it accordingly.
10. The ash holder is big, avoiding frequent cleanup of ash.
Manufacturing
Our stoves are made of brand-new steel of excellent quality, and the jerry-buildings are strictly forbidden.
2.All spare parts are made by ourselves, which gives a strong assurance to the quality.
3.We use the gas shielded welding which can make sure the joints are smooth and firm.
4. The car spray of craft of the lacquer that bake reaches on the face plate of furnace, bring brand-new visual sense to enjoy for kitchen life undoubtedly.
biomass straw briquetting machine 1T/H
biomass straw briquetting machine 1T/H
can make sawdust and all biomass straw into briquettes,
Simple Operation and Convenient
biomass straw briquetting machine 1T/H
detail description of biomass straw briquetting machine 1T/H
1. High production and little energy consumption
2.the diameter of the finished briquettng is 32mm.
3. the length of the finished products is 55mm.
4. Simple Operation and Convenient Use: only 2-3 people can meet your production.
5.
Function of Electrical Heating: The automatic heating apparatus,
adjusting the humidity of materials, can solve the difficulties of no clogging and
no molding.
technican parameter of biomass straw briquetting machine 1T/H
this machine including 4 parts :
1. Straw Briquette Machine
type: DS-2000
size: 2*0.9*1.5m
weight: 1800kg
power: 22kw
capacity : 1 T/H
2. Power Distribution Cabinet
size: 0.6*0.4*1.11m
weight: 20 kg
3. Straw Breaker
type: 96ZP-60
size: 1.9*0.6*2.4m
weight: 900kg
power : 11kw
capacity : 1 T/H
4 Conveyor
type: 6000
size: 8*0.6*0.7m
weight: 500kg
capacity: 1T/H
.
can make sawdust and all biomass straw into briquettes,
Simple Operation and Convenient
biomass straw briquetting machine 1T/H
detail description of biomass straw briquetting machine 1T/H
1. High production and little energy consumption
2.the diameter of the finished briquettng is 32mm.
3. the length of the finished products is 55mm.
4. Simple Operation and Convenient Use: only 2-3 people can meet your production.
5.
Function of Electrical Heating: The automatic heating apparatus,
adjusting the humidity of materials, can solve the difficulties of no clogging and
no molding.
technican parameter of biomass straw briquetting machine 1T/H
this machine including 4 parts :
1. Straw Briquette Machine
type: DS-2000
size: 2*0.9*1.5m
weight: 1800kg
power: 22kw
capacity : 1 T/H
2. Power Distribution Cabinet
size: 0.6*0.4*1.11m
weight: 20 kg
3. Straw Breaker
type: 96ZP-60
size: 1.9*0.6*2.4m
weight: 900kg
power : 11kw
capacity : 1 T/H
4 Conveyor
type: 6000
size: 8*0.6*0.7m
weight: 500kg
capacity: 1T/H
.
biomass/straw briquette machine
biomass/straw briquette machine
1.CE Certification
2.Hot sale in Europe
3.Easy operation
4 Long life of machine
biomass/
straw
briquette
machine
Straw fuel can replace the wood, coal and Liquefied gas, etc., widely used in Living stove, heating furnace, hot water boilers, industrial boilers, biomass power plant and so on.
This machine shows the advantages of high automaticity, low electricity consumption, low price, high capacity and easy movable operation. And diesel engine is available.
Raw materials: All kinds of straw materials, just like crop stalks, wheat straw, grass, powder materials and ≤50mm diameter solid materials.
1.CE Certification
2.Hot sale in Europe
3.Easy operation
4 Long life of machine
biomass/
straw
briquette
machine
Straw fuel can replace the wood, coal and Liquefied gas, etc., widely used in Living stove, heating furnace, hot water boilers, industrial boilers, biomass power plant and so on.
This machine shows the advantages of high automaticity, low electricity consumption, low price, high capacity and easy movable operation. And diesel engine is available.
Raw materials: All kinds of straw materials, just like crop stalks, wheat straw, grass, powder materials and ≤50mm diameter solid materials.
black and non - ferrous metal powder ball press
black and non - ferrous metal powder ball press
1.high strength,
2.passed the ISO9001:2000 Quality System Certification.
The black and non - ferrous metal powder ball press mainly utilize waste materials of steel, such as cinder, dust mud, blast-furnace dust,steel slag, manganese ore powder, silicon-manganese alloy powder, iron-making mineral fines, washed ore powder; mineral fines of non ferrous metal industry. Any powdered materials, needing to be smelted in furnaces, must be palletized through ball presses.
Our factory has a history of more than ten years'experience in producing ball press and specially design the equipment and auxiliary equipment of hard things cold-pressed pellet and for the metallurgical industry which is strong in adaptability, high in strength, wear and durable.
All the equipment are cyber-designed by the engineers and obtained six national patents. Our company has passed the ISO9001:2000 Quality System Certification.
1.high strength,
2.passed the ISO9001:2000 Quality System Certification.
The black and non - ferrous metal powder ball press mainly utilize waste materials of steel, such as cinder, dust mud, blast-furnace dust,steel slag, manganese ore powder, silicon-manganese alloy powder, iron-making mineral fines, washed ore powder; mineral fines of non ferrous metal industry. Any powdered materials, needing to be smelted in furnaces, must be palletized through ball presses.
Our factory has a history of more than ten years'experience in producing ball press and specially design the equipment and auxiliary equipment of hard things cold-pressed pellet and for the metallurgical industry which is strong in adaptability, high in strength, wear and durable.
All the equipment are cyber-designed by the engineers and obtained six national patents. Our company has passed the ISO9001:2000 Quality System Certification.
bleached white wood powder
bleached white wood powder
Product name:Wood powder
Size: 325mesh
Material: poplar or hard wood.
Usage:WPC, leather
bleached white wood powder
Product name
Wood powder
Size:
50~325mesh
Material
poplar or hard wood.
Capacity:
500MT per month.
Colour:
White or brown colour.
Packing:
25kg/bag ,500kg/bag in bulk packing or as requested.
Quality:
Ash content under 15%, moisture under 10%.
Usage:
Suitable for making paper, incense stick, WPC products, process leather, highway, coating, wire, cat litter, household products stuffing etc.
My factory produce quality wood powder with 50-325mesh,ash under 15%,moisture under 5%,suitable for making incense stick,WPC etc
Product name:Wood powder
Size: 325mesh
Material: poplar or hard wood.
Usage:WPC, leather
bleached white wood powder
Product name
Wood powder
Size:
50~325mesh
Material
poplar or hard wood.
Capacity:
500MT per month.
Colour:
White or brown colour.
Packing:
25kg/bag ,500kg/bag in bulk packing or as requested.
Quality:
Ash content under 15%, moisture under 10%.
Usage:
Suitable for making paper, incense stick, WPC products, process leather, highway, coating, wire, cat litter, household products stuffing etc.
My factory produce quality wood powder with 50-325mesh,ash under 15%,moisture under 5%,suitable for making incense stick,WPC etc
300W wind power generator
1.35% more electricity generated
2. wind and solar system wind generator
4.3 year quality warranty
5.Low start-up wind speed
we are a manufacturer producing superior wait from 200w-50kw wind power generator with long lifetime and best price.we can design the products for the customs
our products are CE Registered solar and wind hybrid wind power generator
power
300W
Blade diameter
2.6m
ratedspeed r/m
400
ratedwindspeed m/s
8m/s
rated output power
300W
maxpower
450w
outputvoltage
12v/24v
startwindspeed
3(m/s)
workingwindspeed
3-25(m/s)
securitywindspeed
40(m/s)
the hight of tower
6(m)
weight of top section
56kg
type of tower
60
outputcontroller
inverter,controller
Capacity and quantity of battery(reference)
12V100AH 2pcs
Can take the load:
TV (29 inches or less), lighting, electric fans,
2. wind and solar system wind generator
4.3 year quality warranty
5.Low start-up wind speed
we are a manufacturer producing superior wait from 200w-50kw wind power generator with long lifetime and best price.we can design the products for the customs
our products are CE Registered solar and wind hybrid wind power generator
power
300W
Blade diameter
2.6m
ratedspeed r/m
400
ratedwindspeed m/s
8m/s
rated output power
300W
maxpower
450w
outputvoltage
12v/24v
startwindspeed
3(m/s)
workingwindspeed
3-25(m/s)
securitywindspeed
40(m/s)
the hight of tower
6(m)
weight of top section
56kg
type of tower
60
outputcontroller
inverter,controller
Capacity and quantity of battery(reference)
12V100AH 2pcs
Can take the load:
TV (29 inches or less), lighting, electric fans,
bleached white wood powder
bleached white wood powder
Product name:Wood powder
Size: 325mesh
Material: poplar or hard wood.
Usage:WPC, leather
bleached white wood powder
1.Product name:Wood powder
2.Size: 50~325mesh
3.Material: poplar or hard wood.
4.Capacity: 500MT per month.
5.Colour: White or brown colour.
6.Packing: 30kg/bag ,500kg/bag in bulk packing or as requested.
7.Quality: Ash content under 15%, moisture under 10%.
8.Usage: Suitable for making paper, incense stick, WPC products, process leather, highway, coating, wire, cat litter, household products stuffing etc.
9.My factory produce quality wood powder with 50-325mesh,ash under 15%,moisture under 5%,suitable for making incense stick,WPC etc
Product name:Wood powder
Size: 325mesh
Material: poplar or hard wood.
Usage:WPC, leather
bleached white wood powder
1.Product name:Wood powder
2.Size: 50~325mesh
3.Material: poplar or hard wood.
4.Capacity: 500MT per month.
5.Colour: White or brown colour.
6.Packing: 30kg/bag ,500kg/bag in bulk packing or as requested.
7.Quality: Ash content under 15%, moisture under 10%.
8.Usage: Suitable for making paper, incense stick, WPC products, process leather, highway, coating, wire, cat litter, household products stuffing etc.
9.My factory produce quality wood powder with 50-325mesh,ash under 15%,moisture under 5%,suitable for making incense stick,WPC etc
booster
Boosters receive detonation wave of percussion detonator or other booster and output enery to detonate other explosives.
The booster could receive detonation wave of percussion detonator or other booster and then could output detonation wave to detonate other explosives such as detonating cord and booster module.
The booster could receive detonation wave of percussion detonator or other booster and then could output detonation wave to detonate other explosives such as detonating cord and booster module.
bowl
1.Disposable bowl.
2.Can be used directly in mic-rowave oven and refrigerator.
3.Eco-friendly,nontoxic,and sanitary production
multifunctional disposable paper plate
Add to My Favorites
Add to My Favorites
Add Product to Favorites
Add Company to Favorites
Product Details:
Dinnerware Type
Dishes & Plates
Material
Paper
Certification
CE / EU, CIQ, EEC, FDA, LFGB, SGS
Feature
Disposable, Eco-Friendly
Place of Origin
Shandong, China (Mainland)
Brand Name
HAIYUN
paper plate
disposable paper plate
Payment & Shipping Terms:
Price:
FOB USD 2500~2700 / Metric Ton
Get Latest Price
Minimum Order Quantity:
Negotiable
Trial Order
Minimum Order Quantity:
10 Metric Ton/Metric Tons
Trial Order
Port:
QINGDAO
Packaging Details:
Outside:Kraft paper carton;Inside:POF bag
Delivery Time:
7--30days after receiving deposit
Payment Terms:
L/C,T/T
Supply Ability:
500 Metric Ton/Metric Tons per Month
Offline View Contact Details« Prev Product
1 2 3 4 5 6 7 ...
Next Product »
Detailed Product Description
1.multifunctional disposable paper plate
2.Eco-friendly,Degradable
3.Water and oil resistant
1The detailed information of products
Our main products are multifunctional disposable paper plate, tray, lunch box, bowl, cup and other paper pulp products. The raw material is reed, wheat straw. The paper pulp products can be widely used in the hotel, the other occasions of outside activities. The sizes of paper pulp products that we usually produced are as follows:
Item
Size(mm)
7” Australia round plate
175*15.8
8” Australia round plate
200*17.9
9” Australia round plate
225*19.6
450ml lunch box
172(L)*246(W)*36/15(H)
600ml lunch box
182(L)*271(W)*49.5/20(H)
five department tray
282(L)*220(W)*35/14(H)
And we can produce according to your requirement.
2Corporation Introduction
Established in 2004, Shandong Haiyun Ecological Co., Ltd situated in Siyuan Lake Industrial Park, China mainly deals in the line of manufacturing and distribution of pulp, paper, pulp molding products with the raw material of non-wood plant fiber such as reed and wheat straw. Its existing staff is about 760 including 280 engineers and technicians.
Equipped with full-automatic and EAMC intelligence pulp molding production line, The products that we produced are of such characteristic as safety, health, high strength, non-deformation and non-leakage. Due to eco-friendly, superior quality and reasonable price, our products are widely recognized and used in many industry fields, such as food, agriculture, electronics, medicine, building materials, war industry etc. Since we have our own import and export rights, now the products can be easily exported to Europe, America, Japan, Korea and other international markets.
3Certificate
Language Option
Switch languge to help reading:
French German Italian Russian Spanish Portuguese Korean Arabic
French
German
Italian
Russian
Spanish
Portuguese
Korean
Arabic
2.Can be used directly in mic-rowave oven and refrigerator.
3.Eco-friendly,nontoxic,and sanitary production
multifunctional disposable paper plate
Add to My Favorites
Add to My Favorites
Add Product to Favorites
Add Company to Favorites
Product Details:
Dinnerware Type
Dishes & Plates
Material
Paper
Certification
CE / EU, CIQ, EEC, FDA, LFGB, SGS
Feature
Disposable, Eco-Friendly
Place of Origin
Shandong, China (Mainland)
Brand Name
HAIYUN
paper plate
disposable paper plate
Payment & Shipping Terms:
Price:
FOB USD 2500~2700 / Metric Ton
Get Latest Price
Minimum Order Quantity:
Negotiable
Trial Order
Minimum Order Quantity:
10 Metric Ton/Metric Tons
Trial Order
Port:
QINGDAO
Packaging Details:
Outside:Kraft paper carton;Inside:POF bag
Delivery Time:
7--30days after receiving deposit
Payment Terms:
L/C,T/T
Supply Ability:
500 Metric Ton/Metric Tons per Month
Offline View Contact Details« Prev Product
1 2 3 4 5 6 7 ...
Next Product »
Detailed Product Description
1.multifunctional disposable paper plate
2.Eco-friendly,Degradable
3.Water and oil resistant
1The detailed information of products
Our main products are multifunctional disposable paper plate, tray, lunch box, bowl, cup and other paper pulp products. The raw material is reed, wheat straw. The paper pulp products can be widely used in the hotel, the other occasions of outside activities. The sizes of paper pulp products that we usually produced are as follows:
Item
Size(mm)
7” Australia round plate
175*15.8
8” Australia round plate
200*17.9
9” Australia round plate
225*19.6
450ml lunch box
172(L)*246(W)*36/15(H)
600ml lunch box
182(L)*271(W)*49.5/20(H)
five department tray
282(L)*220(W)*35/14(H)
And we can produce according to your requirement.
2Corporation Introduction
Established in 2004, Shandong Haiyun Ecological Co., Ltd situated in Siyuan Lake Industrial Park, China mainly deals in the line of manufacturing and distribution of pulp, paper, pulp molding products with the raw material of non-wood plant fiber such as reed and wheat straw. Its existing staff is about 760 including 280 engineers and technicians.
Equipped with full-automatic and EAMC intelligence pulp molding production line, The products that we produced are of such characteristic as safety, health, high strength, non-deformation and non-leakage. Due to eco-friendly, superior quality and reasonable price, our products are widely recognized and used in many industry fields, such as food, agriculture, electronics, medicine, building materials, war industry etc. Since we have our own import and export rights, now the products can be easily exported to Europe, America, Japan, Korea and other international markets.
3Certificate
Language Option
Switch languge to help reading:
French German Italian Russian Spanish Portuguese Korean Arabic
French
German
Italian
Russian
Spanish
Portuguese
Korean
Arabic
Subscribe to:
Posts (Atom)