Coal briquetting machine

Coal briquetting machine:
1.High efficiency.
2.ISO9001 standard.
3.Whole coal briquetting plant.
4.Reliable performance.
Coal briquetting machine
1.
C
oal briquetting machine can
press various powders into solid ball, such as coal powder, coke powder, charcoal powder, iron ore fine, mill scale, iron powder, cast iron powder,
refractory material, lime powder, dry powder etc. Briquetting press is widely used in mining, metallurgy, cement plant etc.
2. Coal briquetting machine specification:
Type
Roll diameter(mm)
Capacity(t/h)
Power(kw)
KHY290
290
1-3
5.5
KHY360
360
4-6
7.5
KHY430
430
6-8
11
KHY500
500
7-9
18.5-30
KHY650
650
10-15
22-37
KHY800
800
15-20
30-75
KHY850
850
20-25
75-90
KHY1000
1000
25-35
90-110

3. Coal briquetting machine items:
(1).
Materials size required before feeding into briquetting machine: less than 3mm. If the size is larger than 3mm, it is necessary to crush them into smaller size for briquetting.
(2).
Moisture content: About 10%.
(3).
Briquetting plant is made up of crusher, double shaft mixer, binder mixing barrel, briquetting machine, vertical dryer etc.
4.
Markets:
Coal briquetting machine is popular in Asia, Africa, Europe etc. Welcome to visit our factory in Zhengzhou, there are stocks in workshop.

Coal briquetting plant with competitive price

Coal briquetting plant:
Reliable performance.
Competitive price.
Supply complete briquetting equipments.
Delivery in time.
Coal briquetting plant
Our coal briquetting plant KHY series are special machine for handling coal dust. It is very popular in the world market as its low cost, exquisite appearance and high efficiency. Generally, it is pressed powder into pellets by four rollers.

The main technical data of coal briquetting plant as following:
Model: KHY290
Power: 5.5kw
Producing capacity: 1-3 t/hr.
Diameter of roller: 290mm
Width of roller: 200mm
Form of structure: Two rollers single press.

Zhengzhou Kehua Industrial Equipment Co., Ltd is a manufacturer for producing complete roller pressing machine, AAC plant, coal briquette machine, rotary dryer, Sand making line etc. Our factory had more than 10 years in machinery industry. Our machines are with ISO9001:2008 standard, reliable performance with competitive price.
Please contact Lisa: 86-37-69576958. Tell us your raw material, your capacity per hour etc. requirement, we would like to supply detail plan to you with competitive price.

Coal briquetting plant

coal briquetting plant:
More than 20 years manufacturer.
Reliable performance & competitive price.
Sturdy and durable quality
Coal briquetting plant has economic benefits as follows:
A: Waste materials recycling.
B: Environmental friendly.
C: Easy to operate and transport.
D: Lower investment, higher efficiency.

Coal briquetting plant flow chart:

Coal briquetting plant line description:
A: If your raw material is big block, you should choose a crusher.
B: Generally, it is better to add some binder/adhesive into the raw material.
C: about conveyor, you can buy from us, also can make by yourself. We would like to supply the information of conveyor for you.

If you are interested in our machinery, please contact with Lisa Lee:
86-371-69576958.

Coal dust briquette press machine

Briquette press machine:
Direct manufacturer.
ISO9001:2008.
Delivery in time.
Competitive price.
Briquette press machine:
1. Our coal briquette press machine KHY series are special machine for handling coal dust. It is very popular in the world market as its low cost, exquisite appearance and high efficiency. Generally, it is pressed powder into pellets by four rollers.
2. Coal Briquette press equipment has many kinds of style and can satisfy different needs. If you are interested in our coal briquette machine, please contact us without delay, our engineers can design the most reasonable machinery for you based on your demand.
3. Welcome to visit Zhengzhou Kehua Industrial Equipment Co.,Ltd
Contact: Lisa.
Tel: 86-371-69576958
Mobile: 86-15838339164.

Coal gasifier station

HONGJI Coal Gasifier
-Single stage
-To make coal gas for dryer and kiln
-High effeciteve, low enviroment pollution
HONGJI
Coal Gasifier is designed to be high production capacity, high gasification efficiency and better adaptability to various coals, high gas calorific value, and only need two worker to operate it, our coal gasifier can cope with different type heating furnace, kiln, steam boiler and ect.

Coal Gasifier
Specifications:

Model(mm)
QM0.8
QM1.0
QM1.2
QM1.5
QM1.6
QM1.8
QM2.0
QM2.4
QM2.6
QM3.0
QM1.5
Chamber diameter()
800
1000
1200
1500
1600
1800
2000
2400
2600
3000
1500
Hearth active surface
0.5
0.785
1.13
1.77
2.01
2.54
3.14
4.52
5.31
7.07
1.77
Suirable fuel
weak coherent gas carbon,anotherracite,burnt carbon
Fuel granularity(mm)
25-80
Fuel consumption quantitykg/h
40-100
70-140
120-190
160-350
350-460
500-600
500-720
700-1040
850-1200
1700-2000
1800-2200
Gasifying agent
Air ,steam










Gas yieldNm³/h)
140-350
245-490
420-670
560-1200
1200-1600
1500-2100
1750-2500
2500-3600
3000-4300
6000-7000
6500-7500
Gas calorific valu(Kj/Nm³
5020-5670
5020-6000
Water jacket heating area()
4.02
5.02
6.78
10.37
11.06
12.44
17.58
21.87
23.69
30.16
10.37
Steam outputkg/h
60
80
130
200
220
260
350
420
600
840
200
Gas outlet temperature()
(400-500)Plants related with the coal
(400-500)Plants related with the coal
Gas outlet pressure(Pa)
1000
980-1470
1470-1960
980-1470
Gas exportation diameter(mm)
219
325
325
426
426
529
630
720
820
1020
426
Air pressure(Pa)
3000
4000
3000
Saturated air temperature()
50-60
50-65
Ashpan rotational speed(r/h)
0.177-1.77



Equipment gross weight(t)
3.5
4.5
5
7.5
10
20
23.4
29.8
32
37.6
16
Complete machine power(kw)
6
6
6
7
8
10
14
20
20
27
7
Tuyere diameter(mm)
108
108
140
165
219
325
325
426
426
426
219

Coal powder briquette machine

Coal briquette machine:
Direct manufacturer.
Cost saving & high profits.
Easy to operate & maintain.
Competitive price.
Coal briquette machine production line flow chart:


Briquette machine introduction:
1. Structure: This briquette machine is rollers pressing type. Generally, briquette machine with two rollers.
2. Advantages: The briquette machine has the advantages of reasonable structure, excellent manufacture, high output, low energy consumption, convenient operation and so on.
3. Application: The briquette machine is applicable for coal powder, charcoal powder, coke powder, iron ore fines, iron powder, mill scale, carbon black, other mineral powder etc.

Coal/Charcoal Extruder Machine

Coal/Charcoal Extruder Machine
1. three types for you choose GG-140/180/300
2. High capacity
3. competitive price

Coal/Charcoal Extruder Machine
1. three types for you choose GG-140/180/300
2. High capacity
3. competitive price

Model
GG140
GG180
GG300
Capacity
1-2T/hour
2-3 T/H
6 -8 T/H
Product specification
Diameter 20-40
Diameter 20-60
Diameter 20-80
Rotated speed
46-60 r/minutes
39-60 r/min
40-50 r/min
Power
Y160L-4 , 11kw
Y180L-4 , 18.5kw
75 kw kw
Reducer machine
ZQ350
ZQ400
ZQ850
Dimension
(mm)
1700*1200*600
2000*1400*700
2500*1500*1200

Coconut Shell Biomass Briquette Machine Screw Press Type

Coconut Shell Biomass Briquette Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Coconut Shell Biomass Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:

1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials


The process for producing charcoal briquette as follow:

1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick

Characteristic of Biomass Briquette Machine:

1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.

Biomass Briquette Machine:

(High Quality) Sawdust Briquette Machine,Charcoal Making Machine

Wood Briquette Machine:
1.High production, energy-saving
2.Long durablity,good output
3.Easy to operate
4.Stable performance
(High Quality) Sawdust Briquette Machine,Charcoal Making Machine

Biomass Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:

1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials

Working Principle of Sawdust Briquette Machine:

Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:

1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:

1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.

Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood

Biomass Briquette Machine:

0.2KW Canada small maglev wind generator

vertical wind generator
Small maglev
Light wind power generator
Light weight
beautiful
Small vertical wind generator


Hangzhou Shenle Technology Co., Ltd. is committed to

(1) wind energy into electricity,R & D and manufacturing Rather there Arts culture with Chinese characteristics, the landscape of wind turbine,Owns a number of patented technologies.(our engineering team will continue to design new products to meet the market demand, and pay attention to our website)
(2) production intelligent building public corridor electricity apportion device,This product development successfully solved completely corridor public electricity charges. Install this product will be massive saving electricity company charge link and labor cost.
About
Wind generator
Our wind generators are ancient Chinese culture art and modern science and technology, combining the perfect products, Strong visual and environmental photograph union, Have strong Chinese festival atmosphere of high-end products. Have China ceremoniously festal atmosphere of high-end products. Advanced design (maglev), Light weight, high efficiency and low noise.!
For our cities, villages, villas, road, tunnel, building, park, square, scenic spot, island, ships, the camps and mountainous place such as supply natural quiet green energy systems, Is a kind of energy conservation, environmental protection, landscaping of green energy.
Our mission
Since the industrial revolution, humans have already consumed much of the mineral resources, In recent years to various environment change in greenhouse gas emissions, excessive to make global warming, Cause a series of disasters, we shall review is no reflection in daily life's performance?
Everyone is the earth's people, please try your ability to energy consumption expenditure, don't forget to several thousand years later we children living environment.
As long as the earth rotates, the wind that is inexhaustible infinite energy so wind power will be benefit to global environmental efficient technology, we can in order to continuously innovation the technology but unremitting

1KW horizental axis wind turbine

Using NdFeB permanent magnet materials, strong overloading;
closed transmission slip ring, cable is not wound;
wind turbine

model:1kw horizental axis wind turbine
Generator Type: Direct drive permanent magnet VAWT, 3 phase AC
Power(w)
1000
Rated wind speed
(m/s)
9-11
Rotor diameter
(m)
2
Start-up wind speed
(m/s)
3
Height of blade
(m)
2.4
Range of working wind speed(m/s)
3-25
Material of blades and numbers
Glass Fiber Reinforced Plastic/5
Survival wind speed
(m/s)
50
Rated rotor speed
(m/s)
150r/min
Output Voltage
AC48/110/220V
Speed regulation method
Electromagnetic control
Stop method
Electromagnetic brake
Wind energy utilized coeffeicent
30%-40%
Sweep wind area()
3.14
Range of working temperature
-45°C-60°C
Suggested supporting battery
4pcs12v100ah
Top weight (kg)
145
Tower type and height
Guy cable tower/8m

Coconut Shell Charcoal Briquette Machine Superior Quality High Capacity

Wood Briquette Machine:
1.High production, energy-saving
2.Long durablity,good output
3.Easy to operate
4.Stable performance
Coconut Shell Charcoal Briquette Machine

Biomass Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:

1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials

Working Principle of Sawdust Briquette Machine:

Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:

1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:

1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.

Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood

Biomass Briquette Machine:

Coconut Shell Screw Briquette Machine Best Quality

Coconut Shell Screw Briquette Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Coconut Shell Screw Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.

The process for producing charcoal briquette as follow:

1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick


Working Principle of Sawdust Briquette Machine:

Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.

Characteristic of Biomass Briquette Machine:

1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.


Biomass Briquette Machine:

Coconut Shell Screw Briquette Machine Superior Quality High Production

Rice Husk Briquette Forming Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:

1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials

Working Principle of Sawdust Briquette Machine:

Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:

1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:

1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.

Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood

Biomass briquettes:

Coffee Husk Screw Type Briquette Making Machine Best Quality

Wood Briquette Screw Press:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Biomass Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.

Biomass Briquette Machine:

Coiled Tubing Equipment

Coiled tubing equipment
1.Coiled Tubing Diameter 2.375"
2.Coiled tubing length 5000m
3.Continuous pulling capacity 80000 lbs
·The trailer mounted
coiled tubing equipment
is designed for a capacity of 3,500meters of 2-3/8"
coiled tubing
and maximum working pressure of 10,000psi. The
coiled tubing equipment
is widely used for the oilwell service of drilling, fracturing and workover, etc.
·12 wheel tridem drop deck design, approximately 44 ft 4in long, deck of trailer is split beam design or recessed reel mounting.
·The coiled tubing reel is designed quick installation. The 95" spool is designed for the coiled tubing from 1.25" to 2.875".
·The trailer mounted
coiled tubing equipment
is equipped with advanced JR-CTDAS data acquisition system and analysis software to communicate the data wireless.
·Elevate operator's cabin adopts high density foam insulation technique and aluminum housing, which ensures the performance of sound insulation, heat and corrupt resistant.
·The injector has a foldable gooseneck at 96", which is designed for the coiled tubing from 1.25" to 2.875".

Power pack
Engine model
DDC S60
Engine power
550 HP
Transfer case
FUNK
Coiled tubing reel
Size
3,886×2,413×1,778 mm
Reel capacity
2.375"tubing-3,500 m
Optional
1.75"tubing-6,300 m
Optional
2"tubing-4,800 m
Injector
Model
ZRT-80K
Continuous pulling capacity
80,000 lbs
Continuous snubbing capacity
40,000 lbs
Max. speed
190 ft/min
Min. smooth speed
0.5 ft/min
Tubing
1.25"-3.5"
Diameter of the coiled tubing
2.375"
Coiled tubing length
3,500 m
Kingpin
3.5"
Weight
66,000 kg (with tubing)
Overall dimension
14,300×2,600×4,300mm

Coiled Tubing Equipment

Coiled tubing equipment
1.Coiled Tubing Diameter 2.375"
2.Coiled tubing length 5000m
3.Continuous pulling capacity 80000 lbs
·· LGT270
Coiled Tubing Unit
has 5000m coiled tubing at 1.1/2″ and can be widely used for drilling, well completion and well service. Its maximum working pressure is 15,000psi.
· The
coiled tubing unit
has its own power pack, control cabin, coiled tubing reel, injector and wellhead pressure control device and thus does not need extra power from tractor.
· A dedicated lorry cane is equipped with the unit for lifting the injector and wellhead pressure control device.
· The control cabin is spacious and can be hydraulically raised and lowered freely and it also has better noise and heat resistance and better anti-corrosion performance.
· The coiled tubing can be changed easily. The tubing reel has core diameter at 72’’, applicable for coiled tubing diameter lower than 1.3/4″.
· The injector is good for 1″~2.3/8″tubing with foldable 72″gooseneck.
· The coiled tubing unit has strong control capacity and it can work with well under pressure without pollution and damage to the oil and gas layer.
· The unit has good motility, easy installation and removal which greatly shorten well service time.
Power Pack
Engine Model:DDC S60
Transfer Case:STIEBEL
Coiled Tubing Reel
Size:3,048×1,830×1,778mm (120"×72"×70")
Reel Capacity:1.75"-3,500 m (11,482 ft)
Reel Capacity:1.5"-5,000 m (16,404 ft)
Injector
Model:ZRT-60K
Continuous Pulling Capacity:27,000 kg (60,000 lb)
Continuous Snubbing Capacity:13,600 kg (30,000 lb)
Max. Speed:67 m/min (220 ft/min)
Min. Steady Speed:0.06m/min (2.3 ft/min)
Application:1"-2.3/8"
Coiled Tubing Dia.
1.5"
Coiled Tubing Wall Thickness
0.125"
Coiled Tubing Length
5,000 m (16,404 ft)
Coiled Tubing Yield Strength
551 Mpa (80,000 psi)
Max. Working Pressure
69 Mpa (10,000 psi)
Unit Weight
54,990 kg (121,200 lb)
Overall Dimensions(L×W×H))
14,000×2,600×4,300 mm (45.9×8.5×14.1 ft)

Coiled Tubing Equipment

Coiled tubing equipment
1.Coiled tubing diameter 2"
2.Coiled tubing length 6500m
3.Continuous pulling capacity 100000 lbs
·The trailer mounted
coiled tubing equipment
(
coiled tubing trailer
) is widely used in the drilling, fracturing and workover operation, etc., and max. working pressure is 15000psi.
·The trailer integrates hydraulic power pack, operation cabin, coiled tubing reel, injector, wellhead pressure control system as a whole, requests no special tractor-truck to provide power.
·The trailer-3 rear axles with 12 wheels, adopts split type beam with drop deck design to facilitate coiled tubing reel installation.
·Elevated roomy operation cabin adopts high density foam insulation technics and aluminum shell, which has better sound-insulation, heat-resistance and anti-erosion capability.
·The coiled tubing reel installation system is a fast change model. 70’’ spool is suitable for coiled tubing from 1.25’’-2.875’’.
·The injector is suitable for coiled tubing from 1.25’’-2.875’’, folding 96’’ goose neck.
·The
coiled tubing
equipment
(
coiled tubing trailer
) has strong capability on pressure control, can operate on the condition of no well killing, has no pollution to hydrocarbon zone.
·The
coiled tubing
equipment
(
coiled tubing trailer
) has very good mobility, easy installation and easy disassembly to save time. The operation speed is 60-70m/minute, has short cycle of workover operation.
Power pack
Engine model
DDC S60
Engine power
550 HP (410KW@2100rpm)
Transfer case
STIEBEL TYPE-4392
Coiled tubing reel
Size
4039×1390×1778 mm
Reel capacity
2.375"tubing-3800 m
Optional
1.75"tubing-8000 m
Optional
2"tubing-6500 m
Injector
Model
JR-100K
Continuous pulling capacity
100000 lbf
Continuous snubbing capacity
50000 lbf
Max. speed
250 ft/min
Min. smooth speed
0.5 ft/min
Tubing
1.25"-2.875"
Diameter of the coiled tubing
2"
Coiled tubing length
6500 m
Kingpin
3.5"
Weight
90000 kg
Overall dimension
14300×2600×4400mm

Coiled Tubing Equipment

Coiled tubing equipment
1.Coiled Tubing Diameter 2.375"
2.Coiled tubing length 5000m
3.Continuous pulling capacity 80000 lbs
·The trailer mounted
coiled tubing
equipment is designed for a capacity of 3,500meters of 2-3/8"
coiled tubing
and maximum working pressure of 10,000psi. The
coiled tubing unit
is widely used for the oilwell service of drilling, fracturing and workover, etc.
·12 wheel tridem drop deck design, approximately 44 ft 4in long, deck of trailer is split beam design or recessed reel mounting.
·The coiled tubing reel is designed quick installation. The 95" spool is designed for the coiled tubing from 1.25" to 2.875".
·The trailer mounted
coiled tubing equipment
is equipped with advanced JR-CTDAS data acquisition system and analysis software to communicate the data wireless.
·Elevate operator's cabin adopts high density foam insulation technique and aluminum housing, which ensures the performance of sound insulation, heat and corrupt resistant.
·The injector has a foldable gooseneck at 96", which is designed for the coiled tubing from 1.25" to 2.875".
Power pack
Engine model
DDC S60
Engine power
550 HP
Transfer case
FUCK
Coiled tubing reel
Size
3886×2413×1778 mm
Reel capacity
2.375"tubing-3500 m
Optional
1.75"tubing-6300 m
Optional
2"tubing-4800 m
Injector
Model
JR-80K
Continuous pulling capacity
80000 lbs
Continuous snubbing capacity
40000 lbs
Max. speed
250 ft/min
Min. smooth speed
0.5 ft/min
Tubing
1.5"
Diameter of the coiled tubing
2.375"
Coiled tubing length
5000 m
Kingpin
3.5"
Weight
44000 kg
Overall dimension
14300×2600×4300mm

Coiled Tubing Unit

Coiled tubing unit
1.Coiled tubing diameter 2"
2.Coiled tubing length 6500m
3.Continuous pulling capacity 100000 lbs
·The trailer mounted
coiled tubing unit
(
coiled tubing trailer
) is widely used in the drilling, fracturing and workover operation, etc., and max. working pressure is 15000psi.
·The trailer integrates hydraulic power pack, operation cabin, coiled tubing reel, injector, wellhead pressure control system as a whole, requests no special tractor-truck to provide power.
·The trailer-3 rear axles with 12 wheels, adopts split type beam with drop deck design to facilitate coiled tubing reel installation.
·Elevated roomy operation cabin adopts high density foam insulation technics and aluminum shell, which has better sound-insulation, heat-resistance and anti-erosion capability.
·The coiled tubing reel installation system is a fast change model. 70’’ spool is suitable for coiled tubing from 1.25’’-2.875’’.
·The injector is suitable for coiled tubing from 1.25’’-2.875’’, folding 96’’ goose neck.
·The
coiled tubing unit
(
coiled tubing trailer
) has strong capability on pressure control, can operate on the condition of no well killing, has no pollution to hydrocarbon zone.
·The
coiled tubing unit
(
coiled tubing trailer
) has very good mobility, easy installation and easy disassembly to save time. The operation speed is 60-70m/minute, has short cycle of workover operation.
Power Pack
Engine Model:CAT C15
Transfer Case:STIEBEL
Coiled Tubing Reel
Size:4039×2032×1778 mm
(159"× 80"× 70")
Reel Capacity:2"-6,500 m (21,325 ft)
Reel Capacity:1.3/4"-8,000 m (26,246 ft)
Reel Capacity:1.1/2"-11,000 m (36,088 ft)
Injector
Model:ZRT-100K
Continuous Pulling Capacity:45,000 kg (100,000 lb)
Continuous Snubbing Capacity:22,600 kg (50,000 lb)
Max. Speed:170 ft/min(52 m/min)
Min. Steady Speed:0.06 m/min (2.3 ft/min)
Applicable Tubing Size:1.1/2″~3.1/2″
Coiled Tubing Dia.
2"
Coiled Tubing Wall Thickness
0.134"~0.204" (Tapered)
Coiled Tubing Length
6,000 m (19,684 ft)
Coiled Tubing Yield Strength
620 Mpa (90,000 psi)
Max. Working Pressure
69 Mpa (10,000 psi)
Unit Weight
67,000 kg (147,709 ft)
Overall Dimensions (L×W×H)
14,500×2,760×4,400 mm (47.5×9×14.4 ft)

Coiled Tubing Unit

Jereh coiled tubing unit (coiled tubing trailer) is designed for a capacity of 5000 meters of 1.5 inches coiled tubing.
·The trailer mounted
coiled tubing unit
is designed for a capacity of 3,500meters of 2-3/8"
coiled tubing
and maximum working pressure of 10,000psi. The
coiled tubing unit
is widely used for the oilwell service of drilling, fracturing and workover, etc.
·12 wheel tridem drop deck design, approximately 44 ft 4in long, deck of trailer is split beam design or recessed reel mounting.
·The coiled tubing reel is designed quick installation. The 95" spool is designed for the coiled tubing from 1.25" to 2.875".
·The trailer mounted
coiled tubing unit
is equipped with advanced JR-CTDAS data acquisition system and analysis software to communicate the data wireless.
·Elevate operator's cabin adopts high density foam insulation technique and aluminum housing, which ensures the performance of sound insulation, heat and corrupt resistant.
·The injector has a foldable gooseneck at 96", which is designed for the coiled tubing from 1.25" to 2.875".


Power pack
Engine model
DDC S60
Engine power
550 HP
Transfer case
FUCK
Coiled tubing reel
Size
3886×2413×1778 mm
Reel capacity
2.375"tubing-3500 m
Optional
1.75"tubing-6300 m
Optional
2"tubing-4800 m
Injector
Model
JR-80K
Continuous pulling capacity
80000 lbs
Continuous snubbing capacity
40000 lbs
Max. speed
250 ft/min
Min. smooth speed
0.5 ft/min
Tubing
1.5"
Diameter of the coiled tubing
2.375"
Coiled tubing length
5000 m
Kingpin
3.5"
Weight
44000 kg
Overall dimension
14300×2600×4300mm

1KW to 5KW vertical wind turbine

Vertical wind turbine:
1.ISO,CE certification
2.High generation efficiency
3.Simple installation
4.Low start-up wind speed
Vertical wind turbine:

CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.

Description:
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed. 3 Phase Permanent Magnet AC Generator, direct driven, no gearbox,
and not need windward.It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave with automatic ogrid interface or directly on grid invertor.

Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.

Picture of our VAWT:


Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
Please feel free to contact us anytime

Coiled Tubing Unit

Coiled tubing unit
1.Coiled Tubing Diameter 2.375"
2.Coiled tubing length 5000m
3.Continuous pulling capacity 80000 lbs

·The trailer mounted
coiled tubing unit
is designed for a capacity of 3,500meters of 2-3/8"
coiled tubing
and maximum working pressure of 10,000psi. The
coiled tubing unit
is widely used for the oilwell service of drilling, fracturing and workover, etc.
·12 wheel tridem drop deck design, approximately 44 ft 4in long, deck of trailer is split beam design or recessed reel mounting.
·The coiled tubing reel is designed quick installation. The 95" spool is designed for the coiled tubing from 1.25" to 2.875".
·The trailer mounted
coiled tubing unit
is equipped with advanced JR-CTDAS data acquisition system and analysis software to communicate the data wireless.
·Elevate operator's cabin adopts high density foam insulation technique and aluminum housing, which ensures the performance of sound insulation, heat and corrupt resistant.
·The injector has a foldable gooseneck at 96", which is designed for the coiled tubing from 1.25" to 2.875".


Power pack
Engine model
DDC S60
Engine power
550 HP
Transfer case
FUCK
Coiled tubing reel
Size
3886×2413×1778 mm
Reel capacity
2.375"tubing-3500 m
Optional
1.75"tubing-6300 m
Optional
2"tubing-4800 m
Injector
Model
JR-80K
Continuous pulling capacity
80000 lbs
Continuous snubbing capacity
40000 lbs
Max. speed
250 ft/min
Min. smooth speed
0.5 ft/min
Tubing
1.5"
Diameter of the coiled tubing
2.375"
Coiled tubing length
5000 m
Kingpin
3.5"
Weight
44000 kg
Overall dimension
14300×2600×4300mm

Coiled discrete anode

Lightweight
MMO coatings demonstrate very high chemical stability even in environments with very low PH values
Coiled discrete anode
The coiled discrete anode is coiled by Titanium wire,and seal the both end with PVC cap,then fix a vent-pipe into it

Coiled discrete anode Parameter

Specification
Wire Dia(mm)
Current rating
Expected life
φ
25x100mm

φ
2
2.7mA
50 year
φ
25x200mm

φ
2
5.4mA
50 year
φ
25x300mm

φ
2
8.1mA
50 year
φ
25x100mm

φ
3
2.66mA
50 year
φ
25x200mm

φ
3
5.32mA
50 year
φ
25x300mm

φ
3
7.98mA
50 year

Discrete tubular mesh anode and coiled discret anode application
The discrete tubular mesh anode and coiled discrete anode can be used in relatively compact structures such as columns,piles,ect.to provide cathodic protection in areas of corroding rebar

Coiled tubing equipment

Coiled tubing equipment
1.Coiled tubing diameter2-3/8"
2.Coiled tubing length 3500m
3.Continuous pulling capacity 80000 lbs
1.Brief Introduction for coiled tubing equipment
The unit is designed for a capacity of 3,500meters of 2-3/8 coiled tubing and maximum working pressure of 10,000psi
12 wheel tridem drop deck design, approximately 44 ft 4in long, deck of trailer is split beam design or recessed reel mounting.
The coiled tubing reel is designed quick installation. The 95 spool is designed for the coiled tubing from 1.25 to 2.875.
The unit is equipped with advanced JR-CTDAS data acquisition system and analysis software to communicate the data wireless.
The unit is designed for a capacity of 3,500meters of 2-3/8 coiled tubing and maximum working pressure of 10,000psi, which is widely used for the oilwell service of drilling, fracturing and workover, etc.
Elevate operators cabin adopts high density foam insulation technique and aluminum housing, which ensures the performance of sound insulation, heat and corrupt resistant.
The injector has a foldable gooseneck at 96, which is designed for the coiled tubing from 1.25 to 2.875.

Power pack
Engine model
DDC S60
Engine power
550 HP
Transfer case
FUNK
Coiled tubing reel
Size
3,886×2,413×1,778 mm
Reel capacity
2.375"tubing-3,500 m
Optional
1.75"tubing-6,300 m
Optional
2"tubing-4,800 m
Injector
Model
ZRT-80K
Continuous pulling capacity
80,000 lbs
Continuous snubbing capacity
40,000 lbs
Max. speed
190 ft/min
Min. smooth speed
0.5 ft/min
Tubing
1.25"-3.5"
Diameter of the coiled tubing
2.375"
Coiled tubing length
3,500 m
Kingpin
3.5"
Weight
66,000 kg (with tubing)
Overall dimension
14,300×2,600×4,300mm

Coiled tubing unit

Coiled tubing unit
1.Coiled tubing diameter 2"
2.Coiled tubing length 6500m
3.Continuous pulling capacity 100000 lbs
·The trailer mounted
coiled tubing unit
(
coiled tubing trailer
) is widely used in the drilling, fracturing and workover operation, etc., and max. working pressure is 15000psi.
·The trailer integrates hydraulic power pack, operation cabin, coiled tubing reel, injector, wellhead pressure control system as a whole, requests no special tractor-truck to provide power.
·The trailer-3 rear axles with 12 wheels, adopts split type beam with drop deck design to facilitate coiled tubing reel installation.
·Elevated roomy operation cabin adopts high density foam insulation technics and aluminum shell, which has better sound-insulation, heat-resistance and anti-erosion capability.
·The coiled tubing reel installation system is a fast change model. 70’’ spool is suitable for coiled tubing from 1.25’’-2.875’’.
·The injector is suitable for coiled tubing from 1.25’’-2.875’’, folding 96’’ goose neck.
·The
coiled tubing unit
(
coiled tubing trailer
) has strong capability on pressure control, can operate on the condition of no well killing, has no pollution to hydrocarbon zone.
·The
coiled tubing unit
(
coiled tubing trailer
) has very good mobility, easy installation and easy disassembly to save time. The operation speed is 60-70m/minute, has short cycle of workover operation.
Power Pack
Engine Model:CAT C15
Transfer Case:STIEBEL
Coiled Tubing Reel
Size:4039×2032×1778 mm
(159"× 80"× 70")
Reel Capacity:2"-6,500 m (21,325 ft)
Reel Capacity:1.3/4"-8,000 m (26,246 ft)
Reel Capacity:1.1/2"-11,000 m (36,088 ft)
Injector
Model:ZRT-100K
Continuous Pulling Capacity:45,000 kg (100,000 lb)
Continuous Snubbing Capacity:22,600 kg (50,000 lb)
Max. Speed:170 ft/min(52 m/min)
Min. Steady Speed:0.06 m/min (2.3 ft/min)
Applicable Tubing Size:1.1/2″~3.1/2″
Coiled Tubing Dia.
2"
Coiled Tubing Wall Thickness
0.134"~0.204" (Tapered)
Coiled Tubing Length
6,000 m (19,684 ft)
Coiled Tubing Yield Strength
620 Mpa (90,000 psi)
Max. Working Pressure
69 Mpa (10,000 psi)
Unit Weight
67,000 kg (147,709 ft)
Overall Dimensions (L×W×H)
14,500×2,760×4,400 mm (47.5×9×14.4 ft)

Coke powder briquetting machine

Coke powder briquetting machine:It can mold a variety of mineral powder, metal powder, coal powder,coke powder and others.
Coke powder briquetting machine:

1. Model: YHQ500-2
2. Reducer: ZQ500
3. Ratio: 1:31.5
4. Roller size: Φ500×350
5. Spindle speed: 15-17r/min
6. Motor power: 15kw
7. Yield: 8-10t/h
8. Bearing assembly: 3522×4, CUP206×4
9. Overall size(m):2.61×1.75×2.1

Color Steel Plate

Color Steel Plate
Thickness 0.18mm-2mm
Length As you wish
Width 600-1200mm
Type Stee
Specification:
color steel tiles are roll formed by roll forming machines, the thickness and color can be produced as per requirements, these panels are featured with easy installation, high strength, more economic, (low lost ). It is widely used as the garden like factory, hotel, exhibition, villa, civil construction etc.

Raw materials:
Galvanized steel, Galvalume Steel, Galvalume Pre-painted sheet and aluminium sheet.

color steel tile is roll formed by roll forming machine, the raw material can be in different color, If you are interested in our roofing products, please kindly advise me the details of what you need, so that we can make the same as your requirements.

Commodity
corrugated color steel plate
Material
Galvanized steel sheet
Galvalume steel sheet
Pre-painted galvanized sheet
Sheet Thickness
0.2-1.2mm
Sheet Peak Spacing
65mm
Width
850mm
Length
5-12m
Color
Red,blue,green,orange,white,etc
Certificate
ISO9001

Coating Top: >=20 microns Coating Bottom: 5-10 microns
About Our Company
Shijiazhuang Weizhengheng Light Steel Color Plate Co., Ltd. has color coated sheet production lines, galvanizing lines and cold-rolled sheet production lines. We are a large-scale steel deep-processing enterprise. Our company is an excellent private enterprise in Hebei Province. We have been entitled as emphasizing contract and keeping promises business and consumer satisfaction unit. Our galvanized plates and color-coated and cold rolled plates are sold to more countries.
Tel:+86-311-85386696
Fax:+86-311-85389656

Color Steel Plate

corrugated galvanized steel sheet
Thickness 0.18mm-2mm
Length As you wish
Width 600-1200mm
Specification:
color steel tiles are roll formed by roll forming machines, the thickness and color can be produced as per requirements, these panels are featured with easy installation, high strength, more economic, (low lost ). It is widely used as the garden like factory, hotel, exhibition, villa, civil construction etc.

Raw materials:
Galvanized steel, Galvalume Steel, Galvalume Pre-painted sheet and aluminium sheet.

corrugated galvanized steel sheet
is roll formed by roll forming machine, the raw material can be in different color, If you are interested in our roofing products, please kindly advise me the details of what you need, so that we can make the same as your requirements.

Commodity
corrugated color steel plate
Material
Galvanized steel sheet
Galvalume steel sheet
Pre-painted galvanized sheet
Sheet Thickness
0.2-1.2mm
Sheet Peak Spacing
210mm
Width
840mm
Length
5-12m
Color
Red,blue,green,orange,white,etc
Certificate
ISO9001

Coating Top: >=20 microns Coating Bottom: 5-10 microns
About Our Company
Shijiazhuang Weizhengheng Light Steel Color Plate Co., Ltd. has color coated sheet production lines, galvanizing lines and cold-rolled sheet production lines. We are a large-scale steel deep-processing enterprise. Our company is an excellent private enterprise in Hebei Province. We have been entitled as emphasizing contract and keeping promises business and consumer satisfaction unit. Our galvanized plates and color-coated and cold rolled plates are sold to more countries.
Tel:+86-311-85386696
Fax:+86-311-85389656

Color Steel Plate

Color Steel Plate
Thickness 0.18mm-2mm
Length As you wish
Width 600-1200mm
Type Stee
Specification:
color steel tiles are roll formed by roll forming machines, the thickness and color can be produced as per requirements, these panels are featured with easy installation, high strength, more economic, (low lost ). It is widely used as the garden like factory, hotel, exhibition, villa, civil construction etc.

Raw materials:
Galvanized steel, Galvalume Steel, Galvalume Pre-painted sheet and aluminium sheet.

color steel tile is roll formed by roll forming machine, the raw material can be in different color, If you are interested in our roofing products, please kindly advise me the details of what you need, so that we can make the same as your requirements.

Commodity
corrugated color steel plate
Material
Galvanized steel sheet
Galvalume steel sheet
Pre-painted galvanized sheet
Sheet Thickness
0.2-1.2mm
Sheet Peak Spacing
65mm
Width
850mm
Length
5-12m
Color
Red,blue,green,orange,white,etc
Certificate
ISO9001

Coating Top: >=20 microns Coating Bottom: 5-10 microns
About Our Company
Shijiazhuang Weizhengheng Light Steel Color Plate Co., Ltd. has color coated sheet production lines, galvanizing lines and cold-rolled sheet production lines. We are a large-scale steel deep-processing enterprise. Our company is an excellent private enterprise in Hebei Province. We have been entitled as emphasizing contract and keeping promises business and consumer satisfaction unit. Our galvanized plates and color-coated and cold rolled plates are sold to more countries.
Tel:+86-311-85386696
Fax:+86-311-85389656

Color Changing Solar Garden Lights

solar garden lights
1.CE,ISO9001,ROHS Approved
2.100,000 hours working time
3.80% energy saving
4.Pollution-free
solar garden lights

Standing 7 feet tall, the Gama Sonic Single Solar Lamp Post is just what you need to add elegant lighting to your home's exterior. You'll love the easy operation of this beautiful solar lamppost: it automatically turns on at dusk and off at dawn, or you can alternatively choose to use the manual on/off switch. Six super-bright LED lights use a specially patented cone reflector to make the light brighter. The 19th-century gaslight design features beveled glass and classic appeal to your front or back yard.

Color energy saving lamps/bulbs

Color energy saving lamps/bulbs
long lifetime,high power saving.beautiful color ,
CE ROHS is approval
ISO9001 certificate
Color energy saving lamps/bulbs
specification

Voltage:110-130/220-240
watt:9w,11w,13w,15w,18w
Base:E27/B22
lifehours≥8000H
color temperatureR/Y/B/G
color index≥82

Jiaxing Bingsheng Lighting Appliance Co., Ltd.(Haiyan Bingsheng Bulb Co.,Ltd ), located in Shiquan Town of Zhejiang province ,is specialized in manufacturing all kinds of lighting source products since 1985 .
Our products range includes different kinds of incandescent bulbs ,energy saving lamps ,Halogen bulbs ,LED lamps and fluorescent tubes etc .All of them are exported to the worldwide market .Based on excellent quality ,reasonable prices and perfect trade service ,our products maintain good reputation in the world .
We have over 40000 square meters production area . Our monthly capacity of incandescent bulbs is up to 6,000,000pcs per month . Our factory have been ISO 9001 certified. All our products have CE ,ROHS approvals .
We have strong R&D capacity and quality control team .We ceaselessly develop new products to meet with our customers’ demand .Top quality and credit service is our aim forever .We make sure every product to our clients is perfect without any performance fault .
We sincerely welcome all customers from all over the world to establish good business relationship with us !

1KW vertical axis wind turbine CE

vertical axis wind turbine:
1.Low start-up wind speed
2.Better quality, low noise
3.Safe,quiet,efficient
4.Own patent and CE
vertical axis wind turbine:

Power
1KW
VAWT(USD/SET)
1100
CONTROLLER(USD/SET)
160
INVERTOR(USD/SET)
485
WHOLE GENERATOR EXCEPT BATTERY
AND TOWER(USD/SET)
1745
RATED SPEED(m/s)
8
OUT DC (v)
48
SETUP SPEED(m/s)
2
WORKING SPEED(m/s)
3-20
SAFE SPEED(m/s)
40
HEIGHT OF TOWER(m)
6
Type OF TOWER(mm)
75×4
BATTERY BANK ADVISED
12V150AH×4
USAGE
SMALL FRIDGE, WASHING MACHINE,
PUMP, TV,FANS,LIGHTING

Picture of our wind turbine :

Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.Please feel free to contact us anytime

Colorless transparent antimicrobial self-clean coating

Colorless transparent antimicrobial self-clean coating:surface of metal, glas, marble, ceramic tile, textile and wood
Colorless, transparent, and visibility and transparency aren’t be affected.
Environment friendly. no-toxic, no pollution.
Easy construction method, Spraying and brushing, easily operation, no need special instruments.
Rapidly form film, fast action, the product can be sprayed and brushed on the surface of metals, glass, Marble, tile, plastic products and so on. The hard and durable nano protecting film with anti-water, hydrophilic, self-clean and anti-fog is formed within several minutes
Unique nano protecting film has super hydrophilic and self-cleaning function that water can form an even film rapidly, and bring away the surface pollution, so the surface will keep clean.
Hard and durable, it can last at least 1 year after spraying one time.
product characteristics

Index name
performance parameter
appearance
Colorless and transparent
Content (SiO2)
Min 1.7%
content(TiO2)
Min 1%
PH value
5-6
density
0.9??xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" />0.01g/ml
Particle size
Max 5nm
Alcohol compounds
Max96.1%
water
Max 1.2%
product function
water-proof,dust-proof
Hydrophilic , foil-removal
Anti-oil
Anti-fog , anti-dew
Purifying air
Anti-Uv
principle
Self-cleaning principle
There are nano material with light catalytic activity in the coating, it can produce energy which makes the film absorb water and oxygen molecules to form hydroxyl radical and reactive oxygen after absorbing some length sunlight, so it has strong oxidizing capacity which can degrade the organism into CO
2
and H
2
O, so the surface has self-clean function, and easily clean.
Anti-fog principle
The function of anti-fog also has something with photocatalyst active substance. With the sunlight, part of oxygen bond bridge is opened to dissociate near absorbed water molecules into OH-, for good hydrophilic capacity of OH-, the water will completely and wetly spread to form a transparent thin film while contacting the coating surface, so the anti-fog function is obtained.
application field
All kinds of glass glass wall of building, glass of building windows and doors , decorative glass of building
Vehicle, train glass Front and rear windshield and window of vehicle and train, wing mirror of vehicle
Anti-fog glass bath room, Steam Room, decorative anti-fog glass
All kinds of Billboards, solar glass
construction method
Step 1. Cleaning glass: clean the foil and oil from the glass surface. .
Step2. Grinding the glass surface with grind paste to ensure the glass with better capacity of adhesion and hydrophilicity
Step3. Washing the glass surface with water, then dry with clean cloth.
Step 4. Spraying hydrophilic coating: Spraying the coating on the glass surface evenly with spray gun, spray three times if it is one time in level and vertical directions, the surface dry time needs one and half an hour, the real dry needs one week, and the surface should be protected with week.
The thickness of coating should be controlled within 4~5um, the construction area: 50-60 m2/L
storage
Stored in cool place and far away from the hot resource
Shelf life Two years at room temperature.
specification
1/2/20 L
Caution
Don’t contact eyes and mouth,
Sealed after usage
The product is flammable, please pay attention to fire safety.

Combustible Gas production equipments

Combustible Gas production equipments takes use of reproducible energy raw materials (such as farm crops straw and stalk) to pro
The raw materials for Combustible Gas production equipments can be all the plant and living being wastes, and waste residue from industrial enterprise, such as alcohol residue, sugar residue, xylose residue, foodstuff manufactuing plant residue, etc. all can be used as the raw materials of Combustible Gas production equipments, which can solve the theatment, transportation and environmental questions of enterprise wastes, provide energy source for enterprise drying, heating and boiler, supply combustable gas for workers washing, warming and cooking, and reclaim byproducts such as wood tar, pyroligneous liquor, methyl alcohol, etc.

Combustible Gas production equipments

Combustible Gas production equipments takes use of reproducible energy raw materials (such as farm crops straw and stalk) to pro
The raw materials for Combustible Gas production equipments can be all the plant and living being wastes, and waste residue from industrial enterprise, such as alcohol residue, sugar residue, xylose residue, foodstuff manufactuing plant residue, etc. all can be used as the raw materials of Combustible Gas production equipments, which can solve the theatment, transportation and environmental questions of enterprise wastes, provide energy source for enterprise drying, heating and boiler, supply combustable gas for workers washing, warming and cooking, and reclaim byproducts such as wood tar, pyroligneous liquor, methyl alcohol, etc.

Commercial Heat pump Hot Water Units

Apply world famous compressor.4-way valve,expansion valve.the performance is higher and more stable
silent work, no pollution
Rated heating output:
11.2kw
input power:
2.8kw
voltage:
380v--50HZ
Rated output water temperature:
55°c
Max output water temperature:
60°c
Rated output water quantity:
240L
Compressor form:
effective flexible scroll type
Compresspr brand:
copeland
Heat exchanger form:
effective spiral double pipe heat exchanger
Draught form:
internal rator motor
Draught power:
150w
Apply to place:
student domitory,worker domotory,hospital,hotel,entertainment center,big chamber constant tem perature pool,laundry shop,restaurant,and culture farm
Hot water work conditons.cold water temperature 15°c,environment temperature20°c

Compact Stand-along New Energy Power System

Speciality:Low wind speed start,Changeable propeller pitch control,The system work safer.
Compact Stand-along New Energy Power System
double lamp

Compatible battery charger 220v dc for Dell PA-13 from fcatory

ac dc charger for Dell
green power safe, compatible
CE/FCC/RoHS certificated
12 months warranty
fast delivery


19.5 V 6.7 A notebook ac adapter
for Dell PA-13 notebook


135 W ac dc charger
2. Specifics:
Output :
19.5 V 6.7 A
Power :
135 W
Tip :
7.4*5.0 mm
Input:
100 V— 240 V
Input Frequency:
47-63 Hz
Efficiency :
> 87 %
Ripple Noise:
< 400mVp-p
Warranty:
12 months
M.T.B.F:
50000 Hours
Certification:
CE / FCC / RoHS




Input
100—240V
OverCurrent protection
Yes
Efficiency
> 87 %
Output

19.5 V
6.7 A
OverHeat Protection
Yes
Ripple Noise
< 400mVp-p
Warranty
12 months
OverVoltage protection
Yes
DC tip
5.0 * 7.4 mm
M.T.B.F
50000 Hours
ShourCircuit Protection
Yes
Size
155*55*30mm

Compatible Part numbers:
P/N 09Y819,PA-1131-02D,X7329,K-5294,HP-AD130B13P,D5A,W1828,P/N T5322,NADP-130AB,NADP-130AB B,NADP-130AB D,W1828,310-4180,D1078,TC887,D1078,301-6580,310-8275,310-7848,310-7489,ADP-15150,IM-M150727
Compatible with following Series:
Dell Inspiron Notebooks:
5150, 5160, 9300
Dell XPS:
M1210, M170, M1710,M1750,M90,GEN 2,M6300
1.Features:
1. low DC ripple, safe, reliable and stable;
4. Tested by full load high temperature burn-in and 100% aging, low defect rate;
8. CE/FCC/RoHS-certified, environment-friendly and safe.









Aging Test Centre

Competitive price!!! anode scrap

1.high fixed carbon
2.high colorific value,,
3.low ash, low sulfur, low moisture,
4.competitive prices.
Commodity:
Anode Scrap
Company Description:
Shenzhou Trading Development Co., Ltd. is located in Gongyi City, Henan Province in China; here there are many aluminum factories, so we have good sources of anode scraps with continuous and large quantity and also competitive price. The supplier of our anode scraps is Henan Yulian Energy Group Co., Ltd., which is a large international professional enterprise engaged in electrolytic aluminum and aluminum fabrication. It has been accredited by clients in this field, and enjoys high reputation among this field, so the products we will supply is value-added.

Product Description:
It is the residual part of prebaked anode carbon block which is used in the electrolytic tank18. Anode scrap is high in calorific value and low in moisture; the calorie of 1t anode scrap is equivalent to that of 1.5t metallurgical coke.

Anode scrap can be divided into different sizes by crushing and screening, including 10cm, 20cm above and powder.

Specifications:
The specifications of lump with the size of 10cm and 20cm above are as follows:
Caloric Value( kcal)
Fixed Carbon (%)
Sulphur Content (%)
Ash Content (%)
Moisture (%)
Volatile Matter (%)
8300-8600
96min
3max
6
1.5max
2.3

The specifications of powder are as follows:

Caloric Value( kcal)
Fixed Carbon (%)
Sulphur Content (%)
Ash Content (%)
Moisture (%)
Volatile Matter (%)
4500-4800
67min
3max
6
1.5max
2.3

Complete Biomass Briquette Plant, Biomass Briquette Press

Biomass Charcoal/Briuqette Machine is used to make the wastes materials into solid briquette/charcoal fuel.
Raw Material to make Charcoal / Biomass Briquette: Any type of Agro-Forestry waste can be used. But the Moisture Content should be Less than 12%, grain size is below 5x5mm. Groundnut-shell Sugarcane Biogases Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Coir Pitch Barks/Straws Rice Husks Forestry wastes Wood Chips and many other Agro wastes.


The best moisture to make briquette is 8-12%; grain size is below 5*5mm. The capacity of the biomass/charcoal briquette screw press is different depending on the different raw material and the operation experience. The diameter of briquette is from 40-100mm; the length of briquette is adjustable; the shape of briquette is square & round & hexagon shape.


Features: 1. Imperative Feeder; 2. Advanced Electrical Control Cabinet: a. Integrated Relay Protector, b. Over-Lading Protector, c. Leakage Protector; 3. Auto-Cutter; 4. Smoke Collector.

Complete Biomass Briquette Press With CE

1)Complete Biomass Briquette Press With CE
2)Produce Green Energy from agro-forestry waste to save the global environment
1)Model Name:
Complete Biomass Briquette Press With CE

2)Prospect:
Due to the rapid increase in the need of energy source, more people start to become interested in Charcoal / Biomass Briquette business. Charcoal / Biomass Briquette are renewable, Eco-friendly Energy especially for agricultural countries.

3)Usage:
Charcoal / Biomass Briquette investment is a best project to generate revenue from agro-forestry waste and to produce Green Energy to save the global environment. The awareness of using Eco-friendly & Non-conventional Bio-coal / Bio-fuel is increasing day-to-day due to the increasing of the conventional fuel cost. This plant can make charcoal stick of different diameter and different shape from biomass and agro-forest waste.

4)Process:
Raw Material to make Charcoal / Biomass Briquette:Any type of Agro-Forestry waste can be used. But the Moisture Content Should be Less than 12%, grain size is below 5×5mm. Groundnut-shell Sugarcane Biogases Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Coir Pitch Barks/Straws Rice Husks Forestry wastes Wood Chips and many other Agro wastes.

5)Made up:
Flowchart of the Charcoal / Biomass Briquette Technology: Raw Material - Crusher - Drying - Biomass Briquette Press - Charcoal Bar Furnace - Finished Charcoal.

1. Crusher
FSJII Hammer Mill is suitable for milling raw material like tree branch, cotton stalk, corn stalk, wheat straw etc) with size less than 50mm(diameter). After milled, the output size can reach diameter 3-5mm, which is suitable for further briquetting.
FSJI Crusher is suitable for crushing raw wood with size less than 200mm (diameter). After milled, the output size can reach diameter 3-5mm, which is suitable for further briquetting.
The two kinds crushers are fitted to the downstream equipments.

2. Dryer
For raw materials with heavy moisture content that above 12%, you need to install a drier, this drier reduces the moisture content below 12% before feeding them into Biomass / Charcoal Briquetting Screw Press. Material for hot air stove: wood waste, wood briquette, coal, etc.

3. Biomass / Charcoal Briquette Screw Press
This Biomass / Charcoal Briquette Screw Press equipped with automatic temperature control are designed to produce high density charcoal. This can be achieved by 15kw-3phase-50hz electrical driven motor and 3 belts pulley for more stable power transfer. Normal capacity of standard model is about 6,000kg per day and can be operated 24 hours a day. The extruded wood briquette (before carbonization) can be used as fuel for wood boilers, stoves or for room heating, but this uncarbonized briquettes has some smoke while burning.

4. Charcoal Bar Furnace
This furnace is ideal equipment for wood briquettes to have anoxic distillation carbonization.
Due to its rational structure, the furnace only needs small quantity of heat consumption.
It adopted Superheated Stream cooling system, thus can speed up the cooling process, improve the quality of charcoal, and reduce the production cycling time. Its horizontal condenser can retrieve much wood tar.

Complete Biomass Briquette Press

1)Complete Biomass Briquette Press
2)From agro-forestry waste to save the global environment
1)Complete Biomass Briquette Press

2)Prospect: Due to the rapid increase in the need of energy source, more people start to become interested in Charcoal / Biomass Briquette business. Charcoal / Biomass Briquette are renewable, Eco-friendly Energy especially for agricultural countries.

3)Charcoal / Biomass Briquette investment is a best project to generate revenue from agro-forestry waste and to produce Green Energy to save the global environment. The awareness of using Eco-friendly & Non-conventional Bio-coal / Bio-fuel is increasing day-to-day due to the increasing of the conventional fuel cost. This plant can make charcoal stick of different diameter and different shape from biomass and agro-forest waste.

4)Raw Material to make Charcoal / Biomass Briquette:Any type of Agro-Forestry waste can be used. But the Moisture Content Should be Less than 12%, grain size is below 5×5mm. Groundnut-shell Sugarcane Biogases Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Coir Pitch Barks/Straws Rice Husks Forestry wastes Wood Chips and many other Agro wastes.

5)Flowchart of the Charcoal / Biomass Briquette Technology: Raw Material - Crusher - Drying - Biomass Briquette Press - Charcoal Bar Furnace - Finished Charcoal.

1. Crusher
FSJII Hammer Mill is suitable for milling raw material like tree branch, cotton stalk, corn stalk, wheat straw etc) with size less than 50mm(diameter). After milled, the output size can reach diameter 3-5mm, which is suitable for further briquetting.
FSJI Crusher is suitable for crushing raw wood with size less than 200mm (diameter). After milled, the output size can reach diameter 3-5mm, which is suitable for further briquetting.
The two kinds crushers are fitted to the downstream equipments.
2. Dryer
For raw materials with heavy moisture content that above 12%, you need to install a drier, this drier reduces the moisture content below 12% before feeding them into Biomass / Charcoal Briquetting Screw Press. Material for hot air stove: wood waste, wood briquette, coal, etc.
3. Biomass / Charcoal Briquette Screw Press
This Biomass / Charcoal Briquette Screw Press equipped with automatic temperature control are designed to produce high density charcoal. This can be achieved by 15kw-3phase-50hz electrical driven motor and 3 belts pulley for more stable power transfer. Normal capacity of standard model is about 6,000kg per day and can be operated 24 hours a day. The extruded wood briquette (before carbonization) can be used as fuel for wood boilers, stoves or for room heating, but this uncarbonized briquettes has some smoke while burning.
4. Charcoal Bar Furnace
This furnace is ideal equipment for wood briquettes to have anoxic distillation carbonization.
Due to its rational structure, the furnace only needs small quantity of heat consumption.
It adopted Superheated Stream cooling system, thus can speed up the cooling process, improve the quality of charcoal, and reduce the production cycling time. Its horizontal condenser can retrieve much wood tar.

1KW vertical wind turbine

vertical wind turbine:
1.Low start-up wind speed
2.Better quality, low noise
3.Safe,quiet,efficient
4.Own patent and CE
Vertical wind turbine:

CTTURBINE has developed several types of vertical axis wind turbine off grid;
and highly competitive on design, quality, price, with its safety, silence, and small size.

Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward. It has perfect performance.
With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.

Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.

Picture of VAWT:

For the power curves and details,please feel free to contact me.

Complete Solar Led Lamps for Street&amp;highway

solar led street lights
1,Timely Delivery
2,Energy Saving >80%
3,Life Span >50000 hours
4,CE,ISO9001,ROHS Approved
solar led street lights

Features:

1. Illumination time is dusk to dawn and is fully automated via a photocell (light sensor).
2. The innovative and latest technology is employed to ensure optimum reliability and performance.
3. The light head attaches to the support arm, which fixes to the pole. The pole has a integral base which
can be bolted directly to a level, solid surface. A battery box is supplied to facilitate the rechargeable batteries.

Configuration Options


LED lights
36W, 50W, 60W, 80W, 100W(options)
Solar panel
80W, 100W, 120W, 150W, 180W(options)
Storage battery
120AH, 160AH, 200AH, 240AH(options)
Controller
12V/5A, 24V/10A(options)
Pole
6m, 8m, 10m, 12m,14m,16m(options)
Daily running hours
80hrs, 10hrs, 12hrs(options)
Autonomy days
3days, 4days, 6days(options)
Battery location
top of pole, bottom of pole, underground(options

Concrete Tube Forming Machine

Concrete Tube Forming Machine for 500-1000mm is the best tube equipment and machine with the diameter from 500mm to 1000mm
Concrete Tube Forming Machine
Concrete Tube Forming Machine for 500-1000mm is the best tube equipment and machine in Dezhou Haitian Electromechanical Technology Co., Ltd. Cheapest Concrete Tube Machine for sewer is the most popular kind of concrete tube machinery all around the world, which has a big efficiency in production.
The HXJ Model Concrete Tube Forming Machine takes advantage of the roll pressure and centrifugal force which is produced by the roll shaft and steel mould rotating to help the concrete pipe for molding.
After the production of pipe, manufacturer should maintain the pipe by steam or maintain by itself to reach the standard.
Our Concrete Pipe machine can produce pipe with the diameter from 400mm to 2000mm, and length from 1000mm to 5000mm. And it can produce about 15-20 pieces of concrete pipes one time.
Moulds are the necessary during producing of concrete sewer tubes by the HXJ tube machine. Just one Concrete Tube Forming Machine can produce different sizes of Sewer Tubes.
Cheap Price and Best Service is here for you all the time.
Concrete Tube Forming Machine Configurations:
Machine Type: HXJ500-1000 Concrete Tube Forming Machine
Concrete Tube Diameters: 500-1000 mm
Concrete Tube Width: 1.7m
Concrete Tube Height: 1.6m
Concrete Tube Length: 3.8m

CondConductive powder ( Copper coated with silver )

CondConductive powder copper conductive powder, has good conductivity, resistance can be achieved than the 10-2cm.
Red silver gray mixture of copper conductive powder, has good conductivity, resistance can be achieved than the 10-2Ωcm.Conducting stability, high temperature, a wide range of uses.
Product Features
Main component: Copper walletContent: 55 Ag / 45 Cu, 50 Ag / 50 Cu, 30 Ag / 70 Cu, 20 Ag / 80 CuParticle size: 5 micronsColor: Gray RedConductive properties, and specific resistance of up to 10-2Ωcm, for a variety of conductive areas of the system.
Application
For a variety of metals and non-metallic conductive coating surface.
Usage
Distributed among the various systems for the conductive paste. Its adding 30% -70%, the volume of the bigger the conductivity the better.

Conquer Series Fuel pump

Conquer Series Fuel Dispenser Model: 50P2221 two nozzles two products type
Conquer Series Fuel Dispenser Model: 50P2221
1.Accuracy: ±0.3%
2.Frequency: 50HZ±1HZ
3.Delivery Rate: 5 to 50L/min
4.Rating Power: 0.75KW
5.Measurbale Minimum: 5L
6.Ambient Humidity: 30% to 90%
7.Noise: ≤80dB(A)
8.Ambient Temperature: -40 to +60
9.Inlet Vacuum: ≥0.06MPa
10.Anti-Explosive ID: Exdm[ib]ib AT3
11.Register Range: 0.00 to 9800.00L or Yuan
12.Anti-Explosive Certificate Number:CE011154 CE011155 CE011156 CE011157
13.Totalizer Range:0.00 to 99999999999.99L or Yuan
14.Range of Price: 0.01 to 99.99Yuan/L
15.License of Manufacturing Metric Instrument:ZheZi00000625
16.Preset Min Value: 0.00 to 0.99L
17.Power Supply: AC380V±20% or AC220V±20%

Constant Temperature Valve of Solar Water Heater

Constant Temperature Valve of Solar Water Heater
Constant Temperature Valve of Solar Water Heater

Constant force spring of a hanger

Support the piping. Reduce vibration of pressure pipeline
Spring of a hanger is mainly used in power plant boiler steaming-water pipe or equipment, in operation of produce the thermal displacement and its equipment device. According to the pipeline stress calculate and determine the spring of a hanger work and the thermal displacement requirements, our factory will spring of a hanger according to the design loads setting: namely spring preloading and appointed cold-state load position; Also marked the cold when the theoretical work position.
Spring of a hanger in before they leave the factory factory made setting, when installed to pipe and equipment, make relevant threaded adjustment, will DingXiao withdraw, when the actual load is spring design requirements of the cold load.
Corrugating tube compensator habits also called theinflation festival, expansion joints, by constitute its working bodies of corrugated pipe (a kind of elastic component) and the tube, bracket, flange, catheter and other accessories composition. Is to use corrugating tube compensator elastic elements of effective telescopic deformation to absorb pipe, tube or container consists of heat bilges cold shrink wait for a reason and produce dimensional change of a kind of compensation devices, belong to a kind of compensation components. But to axial, transverse and angular displacement of to absorb, used in piping, equipment and system of heating of displacement and mechanical displacements absorbs vibration, reduce the noise, etc. In modern industry used widely.

Continuous scrap tyre refinery equipment

We supply refining equipment using waste rubber and plastic, make promise top quality and best price....
We specialized in designing and manufacturing the first class refinery equipment using waste tyre and plastics.And the continuous equipment has characteristics as follows:
1. Environmental protection: Manufacturing the whole set of device should be carried out in an environment of no smoking and no smell, thus the device having excellent safety and environmental protection property.
2. Safty:This series of equipment has the explode-proof and pressure alarm device. When some problems occur in the system, we can ensure the safty of the whole system.
3. High disposal capability: This device has rapid and applied feeding and tapping system, the maximum feeding capacity reaches to 15 tons per 24 hours at least
4. High atmomation degree: It just needs 2 people to operate the whole production line.
The specification is 2200*6000.

Continuous scrap tyre refinery equipment

1.with ISO9001-2008&CE
2.energy saving
3.enviromental protection
We specialized in designing and manufacturing the first class refinery equipment using waste tyre and plastics.And the continuous equipment has characteristics as follows:
1. Environmental protection: Manufacturing the whole set of device should be carried out in an environment of no smoking and no smell, thus the device having excellent safety and environmental protection property.
2. Safty:This series of equipment has the explode-proof and pressure alarm device. When some problems occur in the system, we can ensure the safty of the whole system.
3. High disposal capability: This device has rapid and applied feeding and tapping system, the maximum feeding capacity reaches to 15 tons per 24 hours at least
4. High atmomation degree: It just needs 2 people to operate the whole production line.

Continuous scrap tyre refinery equipment

1.refining equipment using waste rubber and plastic,
2.make promise top quality and best price....
Main Technological Characteristics
1 This device has rapid, continuous and canned feeding and tapping system and the efficiency is more than three times to the traditional Intermittent Operation Equipment.
2. The heating method of the new equipment is indirect heating method, and the advantages of this method are as follows:
A. When some problems occur in the system, closing the induced draught fan can cut the heating source in sudden to ensure the system’s safety.
B.The heat exchange distance is more than that of the old equipment by 5-7 times, thus having a higher thermal efficiency.
C.Extend greatly the service life of main equipment, and the service life of the new equipment is longer than that of the old one by 2-3 times.
3. Equipment’s Shape: beautiful and decent, and economic and practical.
4. Catalyzing heat split technology and chemical extracting technology for product; we can provide special catalyst according to different requirement of customers. The catalyst can decrease the sulfur content and density and solidifying point, improve the smell and color, remove the impurity of the fuel oil. It solve the problem which plagued plastic recycling project with the disadvantages of lots of impurity, bad smell and difficult to store. Take the fuel oil from tyres for an example, the color of oil will be changed from black to transparent red, and the oil can keep longer time for store with better oxidation-resistance.
5. The equipped environmental protection fittings are more perfect, such as waste gas burner, and flue dust chamber.
6. The equipment has reasonable design and advanced manufacturing technologies and a high automation degree and complete safety facilities.

Convenient Solar Power Lights

solar power lights
1,CE ISO RoHS
2,Long life battery,lamp
3,12V/24Vsolar streetlight
4,Efficiency solar panel,controller
solar power lights

Features:

1. Illumination time is dusk to dawn and is fully automated via a photocell (light sensor).
2. The innovative and latest technology is employed to ensure optimum reliability and performance.
3. The solar street light head attaches to the support arm, which fixes to the pole. The solar street light pole has a integral base which
can be bolted directly to a level, solid surface. A battery box is supplied to facilitate the rechargeable batteries.

Configuration Options of solar street light


LED lights
36W, 50W, 60W, 80W, 100W(options)
Solar panel
80W, 100W, 120W, 150W, 180W(options)
Storage battery
120AH, 160AH, 200AH, 240AH(options)
Controller
12V/5A, 24V/10A(options)
Pole
6m, 8m, 10m, 12m,14m,16m(options)
Daily running hours
80hrs, 10hrs, 12hrs(options)
Autonomy days
3days, 4days, 6days(options)
Battery location
top of pole, bottom of pole, underground(options

1KW vertical windmill generator

vertical windmill generator:
1.Low start-up wind speed
2.Long service life
3.High quality, best price
vertical windmill generator:

Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed. 3 Phase Permanent Magnet AC Generator,
direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave with automatic on-grid interface or directly on grid invertor.

Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave


Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous
high voltage when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.

Picture of our windmill generator:

Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.Please feel free to contact us anytime