New tri-element plated vacuum tube,super efficient with outer glass wall thickness over 2.0mm.Widely used on solar water heater.
Solar Vacuum Tube:
Selection of advantages:
1. Glass selection of composite ISO3585: 1991 requirements borosilicate 3.3 glass, the glass has: strong acid, solar projection ratio, impact resistance and other advantages.
2. collector process by magnetron sputtering
3. deposition gradient selective absorbing coating (A1-N/A1), the coating on the Sun has a very high absorption rate and low emissivity, solar absorption ratio ≥ 0.92 (AM1.5), hemisphere than launch? h ≤ 0.086 (80 °C ± 5 °C), air drying temperature of ts ≥ 220 m
2
°C, gas pressure within the vacuum laminated P ≤ 5 × 10-3pa, nausea amount of sun radiation exposure H ≤ 3.8MJ / m, the average heat loss coefficient ult ≤ 0.09w / (m °C).
4.25mm can withstand the impact of hail, even in cold winter areas can also be used.
material
borosilicate glass 3.3
length
1800mm
inner tube diameter
37mm
outer tube diameter
47mm
membrane
gradient AL-N-C/AL selective absorbing coating
solar absorptance
> 0.09 (AM = 1.5)(international requirements as:>0.86)
hemisphere emission ratio
> 0.086 (80 °C) (international provisions: ≤ 0.09)
air drying performance parameters
≥186square meters.°C/kw(international requirements as:≥175)
The amount of sun radiation exposure stuffy
≤ 2.86MJ / m
2
(international provisions: ≤ 3.8)
Average heat loss coefficient
≤ 0.75W / m (International provisions: ≤ 0.90)
inside and outside the tube laminated tube
≤ 5 × 10-3pa (international provisions: ≤ 5 × 10-2pa)
heat shock
Below 25°C 90°C repeated alternating hot and cold water more than three times without damaging the impact of
pressure
withstand the pressure of 0.6Mpa
anti-hail
size of not more than 25mm can withstand without damage hail attack
Saturday, June 25, 2011
Powerful-3 Solar Vacuum Tube
New tri-element plated vacuum tube,super efficient with outer glass wall thickness over 2.0mm.Widely used on solar water heater.
Solar Vacuum Tube:
Selection of advantages:
1. Glass selection of composite ISO3585: 1991 requirements borosilicate 3.3 glass, the glass has: strong acid, solar projection ratio, impact resistance and other advantages.
2. collector process by magnetron sputtering
3. deposition gradient selective absorbing coating (A1-N/A1), the coating on the Sun has a very high absorption rate and low emissivity, solar absorption ratio ≥ 0.92 (AM1.5), hemisphere than launch? h ≤ 0.086 (80 °C ± 5 °C), air drying temperature of ts ≥ 220 m
2
°C, gas pressure within the vacuum laminated P ≤ 5 × 10-3pa, nausea amount of sun radiation exposure H ≤ 3.8MJ / m, the average heat loss coefficient ult ≤ 0.09w / (m °C).
4.25mm can withstand the impact of hail, even in cold winter areas can also be used.
material
borosilicate glass 3.3
length
1800mm
inner tube diameter
37mm
outer tube diameter
47mm
membrane
gradient AL-N-C/AL selective absorbing coating
solar absorptance
> 0.09 (AM = 1.5)(international requirements as:>0.86)
hemisphere emission ratio
> 0.086 (80 °C) (international provisions: ≤ 0.09)
air drying performance parameters
≥186square meters.°C/kw(international requirements as:≥175)
The amount of sun radiation exposure stuffy
≤ 2.86MJ / m
2
(international provisions: ≤ 3.8)
Average heat loss coefficient
≤ 0.75W / m (International provisions: ≤ 0.90)
inside and outside the tube laminated tube
≤ 5 × 10-3pa (international provisions: ≤ 5 × 10-2pa)
heat shock
Below 25°C 90°C repeated alternating hot and cold water more than three times without damaging the impact of
pressure
withstand the pressure of 0.6Mpa
anti-hail
size of not more than 25mm can withstand without damage hail attack
Solar Vacuum Tube:
Selection of advantages:
1. Glass selection of composite ISO3585: 1991 requirements borosilicate 3.3 glass, the glass has: strong acid, solar projection ratio, impact resistance and other advantages.
2. collector process by magnetron sputtering
3. deposition gradient selective absorbing coating (A1-N/A1), the coating on the Sun has a very high absorption rate and low emissivity, solar absorption ratio ≥ 0.92 (AM1.5), hemisphere than launch? h ≤ 0.086 (80 °C ± 5 °C), air drying temperature of ts ≥ 220 m
2
°C, gas pressure within the vacuum laminated P ≤ 5 × 10-3pa, nausea amount of sun radiation exposure H ≤ 3.8MJ / m, the average heat loss coefficient ult ≤ 0.09w / (m °C).
4.25mm can withstand the impact of hail, even in cold winter areas can also be used.
material
borosilicate glass 3.3
length
1800mm
inner tube diameter
37mm
outer tube diameter
47mm
membrane
gradient AL-N-C/AL selective absorbing coating
solar absorptance
> 0.09 (AM = 1.5)(international requirements as:>0.86)
hemisphere emission ratio
> 0.086 (80 °C) (international provisions: ≤ 0.09)
air drying performance parameters
≥186square meters.°C/kw(international requirements as:≥175)
The amount of sun radiation exposure stuffy
≤ 2.86MJ / m
2
(international provisions: ≤ 3.8)
Average heat loss coefficient
≤ 0.75W / m (International provisions: ≤ 0.90)
inside and outside the tube laminated tube
≤ 5 × 10-3pa (international provisions: ≤ 5 × 10-2pa)
heat shock
Below 25°C 90°C repeated alternating hot and cold water more than three times without damaging the impact of
pressure
withstand the pressure of 0.6Mpa
anti-hail
size of not more than 25mm can withstand without damage hail attack
2011 new high power taicang led street light
2011 new high power taicang led street light
1> aluminum reflector
2> toughened glass shade
2011 new high power taicang led street light
Input Voltage
85-285VAC; 12 or 24VAC/DC
Frequency Range
47 ~ 63 Hz
Power Factor(PF)
>0.92
Total Harmonic Distortion(THD)
>20%
Power Efficiency
85%
Working Voltage
85-264VAC, 12 or 24VAC/DC
LED Luminous Efficiency
≥95 lm/w
LED Initial Flux?
2,750 lm ( Tj=25°C )
LED Maintain Flux
2,500 lm ( Tj=70°C,Ta=25°C)
Lamp Output Flux
2,350 lm ( Tj=70°C,Ta=25°C)
Lamp's Efficiency ( %)
>90 %
Illumination ( E )
(Height=6 m )≥20.5 lux(Equal to HPS 40 lux)
(Height=8 m ) ≥11.5 lux(Equal to HPS 25 lux)
(Height=10 m )≥8 lux(Equal to HPS 18 lux)
(Height=12 m )≥6.5 lux(Equal to HPS 12 lux)
Effective Illuminated Area
20×8 m (Height=6 m )
26×10 m (Height=8 m )
Color Temperature
Pure White, White White, Cool White
Color Index(CRI)
Ra>85
Light Source
High Power 1 Watt LED, CREE, OSRAM, SEMILED,EDISON
Light Distribution Curve / Beam Pattern
Asymmetric (Bat Wing) / Rectangular Beam
The Highest Light Intensity Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Beam Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Junction Temperature ( Tj )
70 ° C ± 1 0% ( Ta= 25 ° C )
System Resistance ( Rja )
1.4 ° C / W
Working Temperature
- 30 ° C ~ 40 ° C
Working Humidity
10 % ~ 90 % RH
Storage Temperature
10 ° C ~ 85 ° C
Working Life
> 50,000 Hrs
1 Integrated single unit high power LED light source
2 Imported high brightness semiconductor chips
3 Aluminum Die-casting forming frame
4 Protection class IP65
5 Double light increase lamps and lanterns effective out light Angle
6 High illumination, bright color, free-glare and strobe
7 Able to work under low voltage conditions, safe and reliable
8 Environment-friendly ,excluding the ultraviolet ray and other harmful rays
9 Quit startup
10 With 50000 hrs life time
11 Able to be connected with solar energy system, high controllability
12 Flexible installation
1> aluminum reflector
2> toughened glass shade
2011 new high power taicang led street light
Input Voltage
85-285VAC; 12 or 24VAC/DC
Frequency Range
47 ~ 63 Hz
Power Factor(PF)
>0.92
Total Harmonic Distortion(THD)
>20%
Power Efficiency
85%
Working Voltage
85-264VAC, 12 or 24VAC/DC
LED Luminous Efficiency
≥95 lm/w
LED Initial Flux?
2,750 lm ( Tj=25°C )
LED Maintain Flux
2,500 lm ( Tj=70°C,Ta=25°C)
Lamp Output Flux
2,350 lm ( Tj=70°C,Ta=25°C)
Lamp's Efficiency ( %)
>90 %
Illumination ( E )
(Height=6 m )≥20.5 lux(Equal to HPS 40 lux)
(Height=8 m ) ≥11.5 lux(Equal to HPS 25 lux)
(Height=10 m )≥8 lux(Equal to HPS 18 lux)
(Height=12 m )≥6.5 lux(Equal to HPS 12 lux)
Effective Illuminated Area
20×8 m (Height=6 m )
26×10 m (Height=8 m )
Color Temperature
Pure White, White White, Cool White
Color Index(CRI)
Ra>85
Light Source
High Power 1 Watt LED, CREE, OSRAM, SEMILED,EDISON
Light Distribution Curve / Beam Pattern
Asymmetric (Bat Wing) / Rectangular Beam
The Highest Light Intensity Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Beam Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Junction Temperature ( Tj )
70 ° C ± 1 0% ( Ta= 25 ° C )
System Resistance ( Rja )
1.4 ° C / W
Working Temperature
- 30 ° C ~ 40 ° C
Working Humidity
10 % ~ 90 % RH
Storage Temperature
10 ° C ~ 85 ° C
Working Life
> 50,000 Hrs
1 Integrated single unit high power LED light source
2 Imported high brightness semiconductor chips
3 Aluminum Die-casting forming frame
4 Protection class IP65
5 Double light increase lamps and lanterns effective out light Angle
6 High illumination, bright color, free-glare and strobe
7 Able to work under low voltage conditions, safe and reliable
8 Environment-friendly ,excluding the ultraviolet ray and other harmful rays
9 Quit startup
10 With 50000 hrs life time
11 Able to be connected with solar energy system, high controllability
12 Flexible installation
Powerful-6 Solar Vacuum Tube
Solar vacuum tubes
1.Tubing transmission less than 0.89
2. flexibility less than 0.12%
3.The sun absorption more than 96%
Solar vacuum tubes:
Selection of advantages:
1. Glass selection of composite ISO3585: 1991 requirements borosilicate 3.3 glass, the glass has: strong acid, solar projection ratio, impact resistance and other advantages.
2. collector process by magnetron sputtering
3. deposition gradient selective absorbing coating (A1-N/A1), the coating on the Sun has a very high absorption rate and low emissivity, solar absorption ratio ≥ 0.92 (AM1.5), hemisphere than launch? h ≤ 0.086 (80 °C ± 5 °C), air drying temperature of ts ≥ 220 m
2
°C, gas pressure within the vacuum laminated P ≤ 5 × 10-3pa, nausea amount of sun radiation exposure H ≤ 3.8MJ / m, the average heat loss coefficient ult < 0.09w / (m °C).
4.25mm can withstand the impact of hail, even in cold winter areas can also be used.
Tri-targets vacuum magnetron sputtering
Tube structure
dual tubes, coaxial
Tube material
Borosilicate glass 3.3
Outer tube Dia. and thickness
dia.58mm;thickness1.6mm
Inner tube Dia. and thickness
dia.47mm;thickness1.6mm
Tube length
1500-2100mm
Selective absorbing coating
CU/SS-ALN/ALN
Sediment method
Magnetron sputtering
Vacuum degree
5*10
-3
Outer tube transmittance
≥91%
Absorption rate
≥96%
Emittance rate
≤6%
heat loss efficient
≤0.6w/°C
Stagnation tempreture
260~300°C
thermal expansion coefficient
3.3*10
-6
Pressure endurance
1mpa
Impact endurance( dia.)
≤25mm hailstone
Service life
15year
Welcome old and new customers to negotiate!
1.Tubing transmission less than 0.89
2. flexibility less than 0.12%
3.The sun absorption more than 96%
Solar vacuum tubes:
Selection of advantages:
1. Glass selection of composite ISO3585: 1991 requirements borosilicate 3.3 glass, the glass has: strong acid, solar projection ratio, impact resistance and other advantages.
2. collector process by magnetron sputtering
3. deposition gradient selective absorbing coating (A1-N/A1), the coating on the Sun has a very high absorption rate and low emissivity, solar absorption ratio ≥ 0.92 (AM1.5), hemisphere than launch? h ≤ 0.086 (80 °C ± 5 °C), air drying temperature of ts ≥ 220 m
2
°C, gas pressure within the vacuum laminated P ≤ 5 × 10-3pa, nausea amount of sun radiation exposure H ≤ 3.8MJ / m, the average heat loss coefficient ult < 0.09w / (m °C).
4.25mm can withstand the impact of hail, even in cold winter areas can also be used.
Tri-targets vacuum magnetron sputtering
Tube structure
dual tubes, coaxial
Tube material
Borosilicate glass 3.3
Outer tube Dia. and thickness
dia.58mm;thickness1.6mm
Inner tube Dia. and thickness
dia.47mm;thickness1.6mm
Tube length
1500-2100mm
Selective absorbing coating
CU/SS-ALN/ALN
Sediment method
Magnetron sputtering
Vacuum degree
5*10
-3
Outer tube transmittance
≥91%
Absorption rate
≥96%
Emittance rate
≤6%
heat loss efficient
≤0.6w/°C
Stagnation tempreture
260~300°C
thermal expansion coefficient
3.3*10
-6
Pressure endurance
1mpa
Impact endurance( dia.)
≤25mm hailstone
Service life
15year
Welcome old and new customers to negotiate!
Practical Solar Panel
solar panel
1.CE ISO RoHS
2.Long life battery
3.12V24V garden light
4.Efficiency solar panel,controller
Solar Panel
Standing 7 feet tall, the Gama Sonic Single Solar Lamp Post is just what you need to add elegant lighting to your home's exterior. You'll love the easy operation of this beautiful solar lamppost: it automatically turns on at dusk and off at dawn, or you can alternatively choose to use the manual on/off switch. Six super-bright LED lights use a specially patented cone reflector to make the light brighter. The 19th-century gaslight design features beveled glass and classic appeal to your front or back yard.
1.CE ISO RoHS
2.Long life battery
3.12V24V garden light
4.Efficiency solar panel,controller
Solar Panel
Standing 7 feet tall, the Gama Sonic Single Solar Lamp Post is just what you need to add elegant lighting to your home's exterior. You'll love the easy operation of this beautiful solar lamppost: it automatically turns on at dusk and off at dawn, or you can alternatively choose to use the manual on/off switch. Six super-bright LED lights use a specially patented cone reflector to make the light brighter. The 19th-century gaslight design features beveled glass and classic appeal to your front or back yard.
Practical Solar Panels
solar panels
1.CE ISO RoHS
2.Long life battery
3.12V24V garden light
4.Efficiency solar panel,controller
Solar Panels
Standing 7 feet tall, the Gama Sonic Single Solar Lamp Post is just what you need to add elegant lighting to your home's exterior. You'll love the easy operation of this beautiful solar lamppost: it automatically turns on at dusk and off at dawn, or you can alternatively choose to use the manual on/off switch. Six super-bright LED lights use a specially patented cone reflector to make the light brighter. The 19th-century gaslight design features beveled glass and classic appeal to your front or back yard.
1.CE ISO RoHS
2.Long life battery
3.12V24V garden light
4.Efficiency solar panel,controller
Solar Panels
Standing 7 feet tall, the Gama Sonic Single Solar Lamp Post is just what you need to add elegant lighting to your home's exterior. You'll love the easy operation of this beautiful solar lamppost: it automatically turns on at dusk and off at dawn, or you can alternatively choose to use the manual on/off switch. Six super-bright LED lights use a specially patented cone reflector to make the light brighter. The 19th-century gaslight design features beveled glass and classic appeal to your front or back yard.
Practical Solar and Wind Street Light
solar wind street light
1.CE,ISO,ROHS
2.100,000 hours working time
3.80% energy saving wind solar light
4.Pollution-free
solar wind street light
Main components
1.Wind turbine
Wind turbine has adopted high-quality permanent magnet and is specially designed to reduce the start-up torque of alternator. Rotor blades are manufactured by precision injection molding process to make blades exceptional consistency of aerodynamic outline and mass distribution that ensures the rotors to operating at nearly no noise performance and minimal vibration. Wind turbine body is made from high-quality aluminum by precision casting process to enhance its fitness and excellent finishing. It is designed to cater for various working environment.
2.Solar panel
Its task is to convert the sun's energy into electricity. Different sizes and power outputs are available. They have to be carefully chosen for the desired application. Solar panels should be able to withhold and deliver in extreme weather conditions. Some are even designed unbreakable (vandal proof); others will work well in overcast weather.
3.Lamps
LED: They have a good color rendition. A cluster of extra or ultra bright LEDs forms the lamp. LEDs consume a fraction of the energy of comparable lighting and have a very long life span. Wind solar hybrid lights are an emerging and promising application for LED technology.
CF: Compact Fluorescent lamps produce a white light and are used in places where color rendering is desired.
LPS: Low Pressure Sodium lamps generate a monochromatic yellow-orange light and are used when color rendering is not an issue. They have a lifespan of up to 18,000 hours.
4.Controllers
The lights automatically come on at dusk when a photosensitive cell detects that it’s dark. It automatically turns off the turbine when wind speeds get too high, and also alerts human operators when problems need to be addressed or maintenance is required.
5. Storage Battery
Maintenance-free batteries are generally used on wind solar street lights. In addition to providing energy for dusk to dawn operation, they must also be able to supply few days of backup power in case of bad weather or charger failure.
1.CE,ISO,ROHS
2.100,000 hours working time
3.80% energy saving wind solar light
4.Pollution-free
solar wind street light
Main components
1.Wind turbine
Wind turbine has adopted high-quality permanent magnet and is specially designed to reduce the start-up torque of alternator. Rotor blades are manufactured by precision injection molding process to make blades exceptional consistency of aerodynamic outline and mass distribution that ensures the rotors to operating at nearly no noise performance and minimal vibration. Wind turbine body is made from high-quality aluminum by precision casting process to enhance its fitness and excellent finishing. It is designed to cater for various working environment.
2.Solar panel
Its task is to convert the sun's energy into electricity. Different sizes and power outputs are available. They have to be carefully chosen for the desired application. Solar panels should be able to withhold and deliver in extreme weather conditions. Some are even designed unbreakable (vandal proof); others will work well in overcast weather.
3.Lamps
LED: They have a good color rendition. A cluster of extra or ultra bright LEDs forms the lamp. LEDs consume a fraction of the energy of comparable lighting and have a very long life span. Wind solar hybrid lights are an emerging and promising application for LED technology.
CF: Compact Fluorescent lamps produce a white light and are used in places where color rendering is desired.
LPS: Low Pressure Sodium lamps generate a monochromatic yellow-orange light and are used when color rendering is not an issue. They have a lifespan of up to 18,000 hours.
4.Controllers
The lights automatically come on at dusk when a photosensitive cell detects that it’s dark. It automatically turns off the turbine when wind speeds get too high, and also alerts human operators when problems need to be addressed or maintenance is required.
5. Storage Battery
Maintenance-free batteries are generally used on wind solar street lights. In addition to providing energy for dusk to dawn operation, they must also be able to supply few days of backup power in case of bad weather or charger failure.
Practical tray
1.Disposable tray.
2.Can be used directly in mic-rowave oven and refrigerator.
3.Eco-friendly,nontoxic,and sanitary production
multifunctional disposable paper plate
Add to My Favorites
Add to My Favorites
Add Product to Favorites
Add Company to Favorites
Product Details:
Dinnerware Type
Dishes & Plates
Material
Paper
Certification
CE / EU, CIQ, EEC, FDA, LFGB, SGS
Feature
Disposable, Eco-Friendly
Place of Origin
Shandong, China (Mainland)
Brand Name
HAIYUN
paper plate
disposable paper plate
Payment & Shipping Terms:
Price:
FOB USD 2500~2700 / Metric Ton
Get Latest Price
Minimum Order Quantity:
Negotiable
Trial Order
Minimum Order Quantity:
10 Metric Ton/Metric Tons
Trial Order
Port:
QINGDAO
Packaging Details:
Outside:Kraft paper carton;Inside:POF bag
Delivery Time:
7--30days after receiving deposit
Payment Terms:
L/C,T/T
Supply Ability:
500 Metric Ton/Metric Tons per Month
Offline View Contact Details« Prev Product
1 2 3 4 5 6 7 ...
Next Product »
Detailed Product Description
1.multifunctional disposable paper plate
2.Eco-friendly,Degradable
3.Water and oil resistant
1The detailed information of products
Our main products are multifunctional disposable paper plate, tray, lunch box, bowl, cup and other paper pulp products. The raw material is reed, wheat straw. The paper pulp products can be widely used in the hotel, the other occasions of outside activities. The sizes of paper pulp products that we usually produced are as follows:
Item
Size(mm)
7” Australia round plate
175*15.8
8” Australia round plate
200*17.9
9” Australia round plate
225*19.6
450ml lunch box
172(L)*246(W)*36/15(H)
600ml lunch box
182(L)*271(W)*49.5/20(H)
five department tray
282(L)*220(W)*35/14(H)
And we can produce according to your requirement.
2Corporation Introduction
Established in 2004, Shandong Haiyun Ecological Co., Ltd situated in Siyuan Lake Industrial Park, China mainly deals in the line of manufacturing and distribution of pulp, paper, pulp molding products with the raw material of non-wood plant fiber such as reed and wheat straw. Its existing staff is about 760 including 280 engineers and technicians.
Equipped with full-automatic and EAMC intelligence pulp molding production line, The products that we produced are of such characteristic as safety, health, high strength, non-deformation and non-leakage. Due to eco-friendly, superior quality and reasonable price, our products are widely recognized and used in many industry fields, such as food, agriculture, electronics, medicine, building materials, war industry etc. Since we have our own import and export rights, now the products can be easily exported to Europe, America, Japan, Korea and other international markets.
3Certificate
Language Option
Switch languge to help reading:
French German Italian Russian Spanish Portuguese Korean Arabic
French
German
Italian
Russian
Spanish
Portuguese
Korean
Arabic
2.Can be used directly in mic-rowave oven and refrigerator.
3.Eco-friendly,nontoxic,and sanitary production
multifunctional disposable paper plate
Add to My Favorites
Add to My Favorites
Add Product to Favorites
Add Company to Favorites
Product Details:
Dinnerware Type
Dishes & Plates
Material
Paper
Certification
CE / EU, CIQ, EEC, FDA, LFGB, SGS
Feature
Disposable, Eco-Friendly
Place of Origin
Shandong, China (Mainland)
Brand Name
HAIYUN
paper plate
disposable paper plate
Payment & Shipping Terms:
Price:
FOB USD 2500~2700 / Metric Ton
Get Latest Price
Minimum Order Quantity:
Negotiable
Trial Order
Minimum Order Quantity:
10 Metric Ton/Metric Tons
Trial Order
Port:
QINGDAO
Packaging Details:
Outside:Kraft paper carton;Inside:POF bag
Delivery Time:
7--30days after receiving deposit
Payment Terms:
L/C,T/T
Supply Ability:
500 Metric Ton/Metric Tons per Month
Offline View Contact Details« Prev Product
1 2 3 4 5 6 7 ...
Next Product »
Detailed Product Description
1.multifunctional disposable paper plate
2.Eco-friendly,Degradable
3.Water and oil resistant
1The detailed information of products
Our main products are multifunctional disposable paper plate, tray, lunch box, bowl, cup and other paper pulp products. The raw material is reed, wheat straw. The paper pulp products can be widely used in the hotel, the other occasions of outside activities. The sizes of paper pulp products that we usually produced are as follows:
Item
Size(mm)
7” Australia round plate
175*15.8
8” Australia round plate
200*17.9
9” Australia round plate
225*19.6
450ml lunch box
172(L)*246(W)*36/15(H)
600ml lunch box
182(L)*271(W)*49.5/20(H)
five department tray
282(L)*220(W)*35/14(H)
And we can produce according to your requirement.
2Corporation Introduction
Established in 2004, Shandong Haiyun Ecological Co., Ltd situated in Siyuan Lake Industrial Park, China mainly deals in the line of manufacturing and distribution of pulp, paper, pulp molding products with the raw material of non-wood plant fiber such as reed and wheat straw. Its existing staff is about 760 including 280 engineers and technicians.
Equipped with full-automatic and EAMC intelligence pulp molding production line, The products that we produced are of such characteristic as safety, health, high strength, non-deformation and non-leakage. Due to eco-friendly, superior quality and reasonable price, our products are widely recognized and used in many industry fields, such as food, agriculture, electronics, medicine, building materials, war industry etc. Since we have our own import and export rights, now the products can be easily exported to Europe, America, Japan, Korea and other international markets.
3Certificate
Language Option
Switch languge to help reading:
French German Italian Russian Spanish Portuguese Korean Arabic
French
German
Italian
Russian
Spanish
Portuguese
Korean
Arabic
Prebaked carbon anode remnant scrap
1.High fixed carbon and high calorific value.
2.Low sulphur and ash.
3.Competitive price.
4.Professional and sweet service.
Anode Scrap is the residual part of prebaked anode carbon block which is used in the electrolytic tank18. Reacting ith electrolyte over a long period of time, anode scrap has high element of electrolyte, including aluminum, sodium, potassium, calcium, magnesium, lithium, fluorine etc. Anode scrap is high in calorific value and low in moisture; the calorie of 1t anode scrap is equivalent to that of 1.5t metallurgical coke. After being cleaned, anode scrap can be reused in the process of producing anode materials. Anode scrap can be divided into different sizes by crushing and screening, including 10cm, 20cm above and powder. It is used as a kind of aggregate in the process of producing anode carbon block or anode paste. It can also be used as the smelting fuel.
Physicochemical Properties
The specifications of lump with the size of 10cm and 20cm above are as follows:
Caloric Value( kcal)
Fixed Carbon (%)
Sulphur Content (%)
Ash Content (%)
Moisture (%)
Volatile Matter (%)
8300-8600
96min
3max
6
1.5max
2.3
The specifications of powder are as follows:
Caloric Value( kcal)
Fixed Carbon (%)
Sulphur Content (%)
Ash Content (%)
Moisture (%)
Volatile Matter (%)
4500-4800
67min
3max
6
1.5max
2.3
2.Low sulphur and ash.
3.Competitive price.
4.Professional and sweet service.
Anode Scrap is the residual part of prebaked anode carbon block which is used in the electrolytic tank18. Reacting ith electrolyte over a long period of time, anode scrap has high element of electrolyte, including aluminum, sodium, potassium, calcium, magnesium, lithium, fluorine etc. Anode scrap is high in calorific value and low in moisture; the calorie of 1t anode scrap is equivalent to that of 1.5t metallurgical coke. After being cleaned, anode scrap can be reused in the process of producing anode materials. Anode scrap can be divided into different sizes by crushing and screening, including 10cm, 20cm above and powder. It is used as a kind of aggregate in the process of producing anode carbon block or anode paste. It can also be used as the smelting fuel.
Physicochemical Properties
The specifications of lump with the size of 10cm and 20cm above are as follows:
Caloric Value( kcal)
Fixed Carbon (%)
Sulphur Content (%)
Ash Content (%)
Moisture (%)
Volatile Matter (%)
8300-8600
96min
3max
6
1.5max
2.3
The specifications of powder are as follows:
Caloric Value( kcal)
Fixed Carbon (%)
Sulphur Content (%)
Ash Content (%)
Moisture (%)
Volatile Matter (%)
4500-4800
67min
3max
6
1.5max
2.3
Precision ejector Pin
Precision ejector pins
1.Precision manufacture
2.Scientific science and detection
3.Pay attention to customers' requirements
precision ejector pins
Description
· Mold spare part,mold component.Professional Mold Spare Part and Mold Component maker.
· Offers the one stop service from drawing design to the surface treatment.
· Advanced equipment including CNC processing center, EDM, Miller.Grinder,
· Engraving machine, injection machine, also we have the inspection equipment such as height gauges, vernier caliper and video measurement machine
· The strong R &D team equipped with PROE, UG, Solidwork, CAD software can help customer design and develop the different product according to the special requirements
· Strict managment,high quality control and good after-sales service
· ODM &OEM offered
· Certificate:ISO9001
· Tolerance can be controled +/-0.002(steel)
Remark
Any question can let us know for free, we'll try our best to satisfy your requirements.
Hope to cooperate with you in the near future
1.Precision manufacture
2.Scientific science and detection
3.Pay attention to customers' requirements
precision ejector pins
Description
· Mold spare part,mold component.Professional Mold Spare Part and Mold Component maker.
· Offers the one stop service from drawing design to the surface treatment.
· Advanced equipment including CNC processing center, EDM, Miller.Grinder,
· Engraving machine, injection machine, also we have the inspection equipment such as height gauges, vernier caliper and video measurement machine
· The strong R &D team equipped with PROE, UG, Solidwork, CAD software can help customer design and develop the different product according to the special requirements
· Strict managment,high quality control and good after-sales service
· ODM &OEM offered
· Certificate:ISO9001
· Tolerance can be controled +/-0.002(steel)
Remark
Any question can let us know for free, we'll try our best to satisfy your requirements.
Hope to cooperate with you in the near future
Premium Solar Manifold Collector
Premium Solar Manifold Collector
With the architecture appearance
Suitable for cold area
Outreach material
Premium Solar Manifold Collector
System is reliable and runs automatically
Provides best resolution
Can provide enough hot water for bathing from dozens of people to thousands people
Can be widely used in resident zone, school, hotel, army and swimming pool
Can be designed according to actual need
Good insulation quality and structure is easy to maintain
Can be used together with regular energy
Certification
CE,ISO9001,CCC,SGS,ISO14001
Certificate will be obtain in March 2011
Solar Keymark,SRCC,EN12975
FOB Price
Shanghai,Ningbo,Taicang
MOQ
1 set
Delivery Time
3 working days for sample,7 working days for 20Qty 40HQ
Brand Name
Longquan Solar,or with your Brand, or DIY
With the architecture appearance
Suitable for cold area
Outreach material
Premium Solar Manifold Collector
System is reliable and runs automatically
Provides best resolution
Can provide enough hot water for bathing from dozens of people to thousands people
Can be widely used in resident zone, school, hotel, army and swimming pool
Can be designed according to actual need
Good insulation quality and structure is easy to maintain
Can be used together with regular energy
Certification
CE,ISO9001,CCC,SGS,ISO14001
Certificate will be obtain in March 2011
Solar Keymark,SRCC,EN12975
FOB Price
Shanghai,Ningbo,Taicang
MOQ
1 set
Delivery Time
3 working days for sample,7 working days for 20Qty 40HQ
Brand Name
Longquan Solar,or with your Brand, or DIY
Prepainted Coil
Prepainted Coil
1) Grade: JIS G3302 SGCC
2) Width: 700~1534mm
3) Thickness: 0.18-2.5mm
Prepainted Coil
1)
Material
: Prepainted with galvanized steel sheet in coil
2)
Grade
: JIS G3302 SGCC
3)
Width
: 700~1534mm
(1) Tolerance of Width: +/- 0.5mm
4)
Shape
: Plate or Coil
5)
Length
: Fixed or Random
6)
Coil ID
: 508mm or 610mm or 500-610mm
7)
RAL color
: RAL1001 - RAL9023
8)
Thickness
: 0.18
~2.5mm
(1) Tolerance of Thickness: +/- 0.05mm
9)
Coil / Plate Weight
: 5-8Mt or upon customer's request
10)
Minimum Quantity (MOQ)
: 60Mt / Size or Dimensions
11)
Quantity Tolerance
: (1) Less than MOQ: +/- 20%
(2) More than MOQ: +/- 10%
12)
Package
: Each Coil / Plate wrapped by plastic films and water proof paper, reinforced by strapping, packed vertically on pallets.
13)
End Application
: Pipe welding, C-channel, Building materials, Vehicle/ship shield, Steel furniture, water heaters, Container, Panel, etc.
1) Grade: JIS G3302 SGCC
2) Width: 700~1534mm
3) Thickness: 0.18-2.5mm
Prepainted Coil
1)
Material
: Prepainted with galvanized steel sheet in coil
2)
Grade
: JIS G3302 SGCC
3)
Width
: 700~1534mm
(1) Tolerance of Width: +/- 0.5mm
4)
Shape
: Plate or Coil
5)
Length
: Fixed or Random
6)
Coil ID
: 508mm or 610mm or 500-610mm
7)
RAL color
: RAL1001 - RAL9023
8)
Thickness
: 0.18
~2.5mm
(1) Tolerance of Thickness: +/- 0.05mm
9)
Coil / Plate Weight
: 5-8Mt or upon customer's request
10)
Minimum Quantity (MOQ)
: 60Mt / Size or Dimensions
11)
Quantity Tolerance
: (1) Less than MOQ: +/- 20%
(2) More than MOQ: +/- 10%
12)
Package
: Each Coil / Plate wrapped by plastic films and water proof paper, reinforced by strapping, packed vertically on pallets.
13)
End Application
: Pipe welding, C-channel, Building materials, Vehicle/ship shield, Steel furniture, water heaters, Container, Panel, etc.
Press Machine grinding ball
Press Machine grinding ball
1,good quantity
2,Save work force and power
3,Easy maitain and operate
Press Machine grinding ball
1.Model: type 850
2.Dimension:3.9×2.6×2.7(m)
3.Material quality of the rolls: 65 Mn ,be processed by quenching treatment
4.Model of reducer:ZQ850
5.Speed ratio:1:31.5
6.Size of roller:φ850×436
7.Speed of mainshaft: 14-16r/min
8.Model of motor :Y225S-4 Y112M-4
9.Power: 37kw
1,good quantity
2,Save work force and power
3,Easy maitain and operate
Press Machine grinding ball
1.Model: type 850
2.Dimension:3.9×2.6×2.7(m)
3.Material quality of the rolls: 65 Mn ,be processed by quenching treatment
4.Model of reducer:ZQ850
5.Speed ratio:1:31.5
6.Size of roller:φ850×436
7.Speed of mainshaft: 14-16r/min
8.Model of motor :Y225S-4 Y112M-4
9.Power: 37kw
2011 new high power taicang led street light
2011 new high power taicang led street light
1> aluminum reflector
2> toughened glass shade
3> 3 years warrantty
2011 new high power taicang led street light
Input Voltage
85-285VAC; 12 or 24VAC/DC
Frequency Range
47 ~ 63 Hz
Power Factor(PF)
>0.92
Total Harmonic Distortion(THD)
>20%
Power Efficiency
85%
Working Voltage
85-264VAC, 12 or 24VAC/DC
LED Luminous Efficiency
≥95 lm/w
LED Initial Flux?
2,750 lm ( Tj=25°C )
LED Maintain Flux
2,500 lm ( Tj=70°C,Ta=25°C)
Lamp Output Flux
2,350 lm ( Tj=70°C,Ta=25°C)
Lamp's Efficiency ( %)
>90 %
Illumination ( E )
(Height=6 m )≥20.5 lux(Equal to HPS 40 lux)
(Height=8 m ) ≥11.5 lux(Equal to HPS 25 lux)
(Height=10 m )≥8 lux(Equal to HPS 18 lux)
(Height=12 m )≥6.5 lux(Equal to HPS 12 lux)
Effective Illuminated Area
20×8 m (Height=6 m )
26×10 m (Height=8 m )
Color Temperature
Pure White, White White, Cool White
Color Index(CRI)
Ra>85
Light Source
High Power 1 Watt LED, CREE, OSRAM, SEMILED,EDISON
Light Distribution Curve / Beam Pattern
Asymmetric (Bat Wing) / Rectangular Beam
The Highest Light Intensity Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Beam Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Junction Temperature ( Tj )
70 ° C ± 1 0% ( Ta= 25 ° C )
System Resistance ( Rja )
1.4 ° C / W
Working Temperature
- 30 ° C ~ 40 ° C
Working Humidity
10 % ~ 90 % RH
Storage Temperature
10 ° C ~ 85 ° C
Working Life
> 50,000 Hrs
1 Integrated single unit high power LED light source
2 Imported high brightness semiconductor chips
3 Aluminum Die-casting forming frame
4 Protection class IP65
5 Double light increase lamps and lanterns effective out light Angle
6 High illumination, bright color, free-glare and strobe
7 Able to work under low voltage conditions, safe and reliable
8 Environment-friendly ,excluding the ultraviolet ray and other harmful rays
9 Quit startup
10 With 50000 hrs life time
11 Able to be connected with solar energy system, high controllability
12 Flexible installation
1> aluminum reflector
2> toughened glass shade
3> 3 years warrantty
2011 new high power taicang led street light
Input Voltage
85-285VAC; 12 or 24VAC/DC
Frequency Range
47 ~ 63 Hz
Power Factor(PF)
>0.92
Total Harmonic Distortion(THD)
>20%
Power Efficiency
85%
Working Voltage
85-264VAC, 12 or 24VAC/DC
LED Luminous Efficiency
≥95 lm/w
LED Initial Flux?
2,750 lm ( Tj=25°C )
LED Maintain Flux
2,500 lm ( Tj=70°C,Ta=25°C)
Lamp Output Flux
2,350 lm ( Tj=70°C,Ta=25°C)
Lamp's Efficiency ( %)
>90 %
Illumination ( E )
(Height=6 m )≥20.5 lux(Equal to HPS 40 lux)
(Height=8 m ) ≥11.5 lux(Equal to HPS 25 lux)
(Height=10 m )≥8 lux(Equal to HPS 18 lux)
(Height=12 m )≥6.5 lux(Equal to HPS 12 lux)
Effective Illuminated Area
20×8 m (Height=6 m )
26×10 m (Height=8 m )
Color Temperature
Pure White, White White, Cool White
Color Index(CRI)
Ra>85
Light Source
High Power 1 Watt LED, CREE, OSRAM, SEMILED,EDISON
Light Distribution Curve / Beam Pattern
Asymmetric (Bat Wing) / Rectangular Beam
The Highest Light Intensity Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Beam Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Junction Temperature ( Tj )
70 ° C ± 1 0% ( Ta= 25 ° C )
System Resistance ( Rja )
1.4 ° C / W
Working Temperature
- 30 ° C ~ 40 ° C
Working Humidity
10 % ~ 90 % RH
Storage Temperature
10 ° C ~ 85 ° C
Working Life
> 50,000 Hrs
1 Integrated single unit high power LED light source
2 Imported high brightness semiconductor chips
3 Aluminum Die-casting forming frame
4 Protection class IP65
5 Double light increase lamps and lanterns effective out light Angle
6 High illumination, bright color, free-glare and strobe
7 Able to work under low voltage conditions, safe and reliable
8 Environment-friendly ,excluding the ultraviolet ray and other harmful rays
9 Quit startup
10 With 50000 hrs life time
11 Able to be connected with solar energy system, high controllability
12 Flexible installation
Pressed Type Briquetting Machine
Pressed briquetting machine has the high capapcity,
can work 24 hours one day continuously.
The briquetting machine is the mechanical stamped machine.It has two fly-wheel indeed,one wheel is with strap,drive the machine to operate;another wheel stores energy.The diameter of the two fly-wheel is very big,so they have the high efficience for reducing the consumption and saving energy.
can work 24 hours one day continuously.
The briquetting machine is the mechanical stamped machine.It has two fly-wheel indeed,one wheel is with strap,drive the machine to operate;another wheel stores energy.The diameter of the two fly-wheel is very big,so they have the high efficience for reducing the consumption and saving energy.
Pressured-2 solar water heater
Patented technology, Tsinghua University;
ISO9002 quality certification;
high borosilicate all-glass vacuum tube 3.3
Pressure
Yanglide solar water heater:
Automatic water with only the back; open directly out of hot water; water booster anti Xiere; free so warm at any time by; save thousand Yuan equipment costs; three more into hot water; Yin Ching-proof anti-dry; winter Summer wind blocking antifreeze; without water worries can be emergency; simple, reliable and energy saving.
1.1. double endothermic heat Unlimited: Two hot three-high purple tube, a three-target magnetron sputtering process, the uniformity of film coverage, high temperature aging does not fall off; double endothermic design, firmly locked One heat, heat enough power, thermal infinite; borosilicate glass 3.3, super compressive strength, resistance to rain and hail, sustainable use is not damaged; high temperature for a long vacuum tube, heat is not lost.
2.2. Thermal 1 +1, temperature, eternal security: electric heating water tank reserved for the interface to meet your diverse water needs; 1 +1 complementarity of solar and electrical energy, energy saving, heat is greater; out of the climate alone limits of solar , You can always enjoy the hot water.
3.3. hot water that is produced is used: pipeline is not in storage, the winter ice-free tube, water is more power; twisted the faucet, you can use hot water, bathing, washing, laundry, washing fruits and arbitrary.
Modle
solar vacuum tube
scaffold
tank
length
diameter
angle
case material
insulation material
liner material
capacity
LY47-1524-45
1500mm
47mm
45
Imports of high quality stainless steel bend frame
Imports of stainless steel
5mm-65mm imported polyurethane foam
SUS304-2B imported food grade stainless steel plate
160L
ISO9002 quality certification;
high borosilicate all-glass vacuum tube 3.3
Pressure
Yanglide solar water heater:
Automatic water with only the back; open directly out of hot water; water booster anti Xiere; free so warm at any time by; save thousand Yuan equipment costs; three more into hot water; Yin Ching-proof anti-dry; winter Summer wind blocking antifreeze; without water worries can be emergency; simple, reliable and energy saving.
1.1. double endothermic heat Unlimited: Two hot three-high purple tube, a three-target magnetron sputtering process, the uniformity of film coverage, high temperature aging does not fall off; double endothermic design, firmly locked One heat, heat enough power, thermal infinite; borosilicate glass 3.3, super compressive strength, resistance to rain and hail, sustainable use is not damaged; high temperature for a long vacuum tube, heat is not lost.
2.2. Thermal 1 +1, temperature, eternal security: electric heating water tank reserved for the interface to meet your diverse water needs; 1 +1 complementarity of solar and electrical energy, energy saving, heat is greater; out of the climate alone limits of solar , You can always enjoy the hot water.
3.3. hot water that is produced is used: pipeline is not in storage, the winter ice-free tube, water is more power; twisted the faucet, you can use hot water, bathing, washing, laundry, washing fruits and arbitrary.
Modle
solar vacuum tube
scaffold
tank
length
diameter
angle
case material
insulation material
liner material
capacity
LY47-1524-45
1500mm
47mm
45
Imports of high quality stainless steel bend frame
Imports of stainless steel
5mm-65mm imported polyurethane foam
SUS304-2B imported food grade stainless steel plate
160L
Pressured-4 solar water heater
Patented technology, Tsinghua University;
ISO9002 quality certification;
high borosilicate all-glass vacuum tube 3.3
Pressure
Yanglide solar water heater:
Automatic water with only the back; open directly out of hot water; water booster anti Xiere; free so warm at any time by; save thousand Yuan equipment costs; three more into hot water; Yin Ching-proof anti-dry; winter Summer wind blocking antifreeze; without water worries can be emergency; simple, reliable and energy saving.
1.1. double endothermic heat Unlimited: Two hot three-high purple tube, a three-target magnetron sputtering process, the uniformity of film coverage, high temperature aging does not fall off; double endothermic design, firmly locked One heat, heat enough power, thermal infinite; borosilicate glass 3.3, super compressive strength, resistance to rain and hail, sustainable use is not damaged; high temperature for a long vacuum tube, heat is not lost.
2.2. Thermal 1 +1, temperature, eternal security: electric heating water tank reserved for the interface to meet your diverse water needs; 1 +1 complementarity of solar and electrical energy, energy saving, heat is greater; out of the climate alone limits of solar , You can always enjoy the hot water.
3.3. hot water that is produced is used: pipeline is not in storage, the winter ice-free tube, water is more power; twisted the faucet, you can use hot water, bathing, washing, laundry, washing fruits and arbitrary.
Modle
solar vacuum tube
scaffold
tank
length
diameter
angle
case material
insulation material
liner material
capacity
LY58-1816-45
1800mm
58mm
45
Imports of high quality stainless steel bend frame
Imports of stainless steel
5mm-65mm imported polyurethane foam
SUS304-2B imported food grade stainless steel plate
150L
ISO9002 quality certification;
high borosilicate all-glass vacuum tube 3.3
Pressure
Yanglide solar water heater:
Automatic water with only the back; open directly out of hot water; water booster anti Xiere; free so warm at any time by; save thousand Yuan equipment costs; three more into hot water; Yin Ching-proof anti-dry; winter Summer wind blocking antifreeze; without water worries can be emergency; simple, reliable and energy saving.
1.1. double endothermic heat Unlimited: Two hot three-high purple tube, a three-target magnetron sputtering process, the uniformity of film coverage, high temperature aging does not fall off; double endothermic design, firmly locked One heat, heat enough power, thermal infinite; borosilicate glass 3.3, super compressive strength, resistance to rain and hail, sustainable use is not damaged; high temperature for a long vacuum tube, heat is not lost.
2.2. Thermal 1 +1, temperature, eternal security: electric heating water tank reserved for the interface to meet your diverse water needs; 1 +1 complementarity of solar and electrical energy, energy saving, heat is greater; out of the climate alone limits of solar , You can always enjoy the hot water.
3.3. hot water that is produced is used: pipeline is not in storage, the winter ice-free tube, water is more power; twisted the faucet, you can use hot water, bathing, washing, laundry, washing fruits and arbitrary.
Modle
solar vacuum tube
scaffold
tank
length
diameter
angle
case material
insulation material
liner material
capacity
LY58-1816-45
1800mm
58mm
45
Imports of high quality stainless steel bend frame
Imports of stainless steel
5mm-65mm imported polyurethane foam
SUS304-2B imported food grade stainless steel plate
150L
Pressurized Water Tank
80L~10,000L Tanks offered.
Pressurized or non-pressurized optional.
OEM/ODM available;
CE & 3 years warranty;
Various color.
Pressurized or non-pressurized optional.
OEM/ODM available;
CE & 3 years warranty;
Various color.
Prime Prepainted Galvanised Steel Sheet In Coil
Prime Prepainted Galvanised Steel Sheet In Coil
1.Standard:AISI,ASTM,GB
2.Color:as per the customer's request
Prime Prepainted Galvanised Steel Sheet In Coil
1- Standard and Grade: JIS G3302, ASTM A653M
2- Thickness: 0.17-5mm
3- Width: 600mm-1300mm
4- Length: upon customer's requirements
5- Color: upon customer's requirements or sample
6- Tolerance: +/-0.02mm
7- Zinc Coating Weight: 60-450gsm, Z60-Z450
8- Surface of product: Regular Spangle, Big Spangle, Zero Spangle,Minimum Spangle
9-Surface Treatment: Chromated,non oiled, skin passed
10- Package: seaworthy export packing
11- Application: used for roofs, walls, cabinets
12- Delivery time:10-45days
13- Shipment: By container
14- Material: SGCH, SGCC
15- Payment term: L/C, T/T
16- Total amount & quantity tolerance: +/- 20%
1.Standard:AISI,ASTM,GB
2.Color:as per the customer's request
Prime Prepainted Galvanised Steel Sheet In Coil
1- Standard and Grade: JIS G3302, ASTM A653M
2- Thickness: 0.17-5mm
3- Width: 600mm-1300mm
4- Length: upon customer's requirements
5- Color: upon customer's requirements or sample
6- Tolerance: +/-0.02mm
7- Zinc Coating Weight: 60-450gsm, Z60-Z450
8- Surface of product: Regular Spangle, Big Spangle, Zero Spangle,Minimum Spangle
9-Surface Treatment: Chromated,non oiled, skin passed
10- Package: seaworthy export packing
11- Application: used for roofs, walls, cabinets
12- Delivery time:10-45days
13- Shipment: By container
14- Material: SGCH, SGCC
15- Payment term: L/C, T/T
16- Total amount & quantity tolerance: +/- 20%
Princess Diana's-- 50W LED grow light
Princess Diana's--50W UFO led Grow Light,120W Led Grow Light,300W Led Grow Light,600W Led Grow Light,90W, 15W and Led Grow ligh
Applications:
Based on the 90W led grow light, we developed more watts for our customer choice. This is a middle ground between 90W and 300W, very moderate one. Its very suitable for public use. Such as flower exhibition, garden park, horticulture. Its a special one.
Features:
Different color we can choose, such as white-painted or black-painted.
You can choose the best style for your need.
Parameters:
Item
Value
Item
Value
Size
Dia 175X60mm
Power
50W (50x1W)
Working environment
-20~40
Lumens
2000 Lm
Storage condition
-40~85
Lifespan
50,000 Hours
Work frequency
50/60 Hz
Packing
46x31x16.5cm/1pcs
Voltage
AC230V/AC120V
Lighting Area
18M²
Lighting time per day
10-16 Hours
Input current
0.3A /0.45A
Height above the Plant
2.5/3.0/3.5 M
Color
Red/Blue/Red& Blue
Lux(1.5m )
Lux
GW
1.1kg
Applications:
Based on the 90W led grow light, we developed more watts for our customer choice. This is a middle ground between 90W and 300W, very moderate one. Its very suitable for public use. Such as flower exhibition, garden park, horticulture. Its a special one.
Features:
Different color we can choose, such as white-painted or black-painted.
You can choose the best style for your need.
Parameters:
Item
Value
Item
Value
Size
Dia 175X60mm
Power
50W (50x1W)
Working environment
-20~40
Lumens
2000 Lm
Storage condition
-40~85
Lifespan
50,000 Hours
Work frequency
50/60 Hz
Packing
46x31x16.5cm/1pcs
Voltage
AC230V/AC120V
Lighting Area
18M²
Lighting time per day
10-16 Hours
Input current
0.3A /0.45A
Height above the Plant
2.5/3.0/3.5 M
Color
Red/Blue/Red& Blue
Lux(1.5m )
Lux
GW
1.1kg
Priority control panel
Priority control panel
Max. Flow capacity: 2000Sm3/h
Priority control panel
Max. Flow capacity
2000Sm
3
/h
Working pressure
5000psi
Inlet
22mm OD Stainless steel pipe
Outlet
3×16mm OD Stainless steel pipe
Operating temp
-40°C~+60°C
Max. Flow capacity: 2000Sm3/h
Priority control panel
Max. Flow capacity
2000Sm
3
/h
Working pressure
5000psi
Inlet
22mm OD Stainless steel pipe
Outlet
3×16mm OD Stainless steel pipe
Operating temp
-40°C~+60°C
Productive Wood Briquette Machine-Screw Press Type
Wood Briquette Screw Press:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Productive Wood Briquette Machine-Screw Press Type
Biomass Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass Briquette Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Productive Wood Briquette Machine-Screw Press Type
Biomass Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass Briquette Machine:
Productive Wood Briquette Machine-Screw Press Type
Wood Briquette Machine:
1.High production, energy-saving
2.Long durablity,good output
3.Easy to operate
4.Stable performance
Productive Wood Briquette Machine-Screw Press Type
Biomass Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass Briquette Machine:
1.High production, energy-saving
2.Long durablity,good output
3.Easy to operate
4.Stable performance
Productive Wood Briquette Machine-Screw Press Type
Biomass Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass Briquette Machine:
Professinoal briquette bar extruder machine
briquette bar extruder machine is used for making coal stick from coal powder, high capacity and competitive price
briquette bar extruder machine, which can make the powder of coal to different coal blocks shapes. The working principle of the coal extruder machine is: The motor transmits power to transmission through the V-belt. At the same time, the transmission output shaft transmits power to propeller through the floating coupling, and the thruster of propeller push forward coal through forming die to produce the ideal high-pressure coal-stick.
briquette bar extruder machine
Type
Capacity(t/h)
Spindle Speed(r/min)
Power(KW)
Diameter of final products
MBJ-140
1-2
46-60
11
30-40mm
MBJ-180
2-3
38-50
22
30-60mm
briquette bar extruder machine, which can make the powder of coal to different coal blocks shapes. The working principle of the coal extruder machine is: The motor transmits power to transmission through the V-belt. At the same time, the transmission output shaft transmits power to propeller through the floating coupling, and the thruster of propeller push forward coal through forming die to produce the ideal high-pressure coal-stick.
briquette bar extruder machine
Type
Capacity(t/h)
Spindle Speed(r/min)
Power(KW)
Diameter of final products
MBJ-140
1-2
46-60
11
30-40mm
MBJ-180
2-3
38-50
22
30-60mm
2011 new high power taicang led street light
2011 new high power taicang led street light
1> aluminum reflector
2> toughened glass shade
2011 new high power taicang led street light
Input Voltage
85-285VAC; 12 or 24VAC/DC
Frequency Range
47 ~ 63 Hz
Power Factor(PF)
>0.92
Total Harmonic Distortion(THD)
>20%
Power Efficiency
85%
Working Voltage
85-264VAC, 12 or 24VAC/DC
LED Luminous Efficiency
≥95 lm/w
LED Initial Flux?
2,750 lm ( Tj=25°C )
LED Maintain Flux
2,500 lm ( Tj=70°C,Ta=25°C)
Lamp Output Flux
2,350 lm ( Tj=70°C,Ta=25°C)
Lamp's Efficiency ( %)
>90 %
Illumination ( E )
(Height=6 m )≥20.5 lux(Equal to HPS 40 lux)
(Height=8 m ) ≥11.5 lux(Equal to HPS 25 lux)
(Height=10 m )≥8 lux(Equal to HPS 18 lux)
(Height=12 m )≥6.5 lux(Equal to HPS 12 lux)
Effective Illuminated Area
20×8 m (Height=6 m )
26×10 m (Height=8 m )
Color Temperature
Pure White, White White, Cool White
Color Index(CRI)
Ra>85
Light Source
High Power 1 Watt LED, CREE, OSRAM, SEMILED,EDISON
Light Distribution Curve / Beam Pattern
Asymmetric (Bat Wing) / Rectangular Beam
The Highest Light Intensity Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Beam Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Junction Temperature ( Tj )
70 ° C ± 1 0% ( Ta= 25 ° C )
System Resistance ( Rja )
1.4 ° C / W
Working Temperature
- 30 ° C ~ 40 ° C
Working Humidity
10 % ~ 90 % RH
Storage Temperature
10 ° C ~ 85 ° C
Working Life
> 50,000 Hrs
1 Integrated single unit high power LED light source
2 Imported high brightness semiconductor chips
3 Aluminum Die-casting forming frame
4 Protection class IP65
5 Double light increase lamps and lanterns effective out light Angle
6 High illumination, bright color, free-glare and strobe
7 Able to work under low voltage conditions, safe and reliable
8 Environment-friendly ,excluding the ultraviolet ray and other harmful rays
9 Quit startup
10 With 50000 hrs life time
11 Able to be connected with solar energy system, high controllability
12 Flexible installation
1> aluminum reflector
2> toughened glass shade
2011 new high power taicang led street light
Input Voltage
85-285VAC; 12 or 24VAC/DC
Frequency Range
47 ~ 63 Hz
Power Factor(PF)
>0.92
Total Harmonic Distortion(THD)
>20%
Power Efficiency
85%
Working Voltage
85-264VAC, 12 or 24VAC/DC
LED Luminous Efficiency
≥95 lm/w
LED Initial Flux?
2,750 lm ( Tj=25°C )
LED Maintain Flux
2,500 lm ( Tj=70°C,Ta=25°C)
Lamp Output Flux
2,350 lm ( Tj=70°C,Ta=25°C)
Lamp's Efficiency ( %)
>90 %
Illumination ( E )
(Height=6 m )≥20.5 lux(Equal to HPS 40 lux)
(Height=8 m ) ≥11.5 lux(Equal to HPS 25 lux)
(Height=10 m )≥8 lux(Equal to HPS 18 lux)
(Height=12 m )≥6.5 lux(Equal to HPS 12 lux)
Effective Illuminated Area
20×8 m (Height=6 m )
26×10 m (Height=8 m )
Color Temperature
Pure White, White White, Cool White
Color Index(CRI)
Ra>85
Light Source
High Power 1 Watt LED, CREE, OSRAM, SEMILED,EDISON
Light Distribution Curve / Beam Pattern
Asymmetric (Bat Wing) / Rectangular Beam
The Highest Light Intensity Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Beam Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Junction Temperature ( Tj )
70 ° C ± 1 0% ( Ta= 25 ° C )
System Resistance ( Rja )
1.4 ° C / W
Working Temperature
- 30 ° C ~ 40 ° C
Working Humidity
10 % ~ 90 % RH
Storage Temperature
10 ° C ~ 85 ° C
Working Life
> 50,000 Hrs
1 Integrated single unit high power LED light source
2 Imported high brightness semiconductor chips
3 Aluminum Die-casting forming frame
4 Protection class IP65
5 Double light increase lamps and lanterns effective out light Angle
6 High illumination, bright color, free-glare and strobe
7 Able to work under low voltage conditions, safe and reliable
8 Environment-friendly ,excluding the ultraviolet ray and other harmful rays
9 Quit startup
10 With 50000 hrs life time
11 Able to be connected with solar energy system, high controllability
12 Flexible installation
Professional -designed Biocoal Forming Machine for Biomass Briquettes(Newly Design)
Biocoal Forming Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
Professional -designed Biocoal Forming Machine for Biomass Briquettes
Biocoal Forming Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
Professional -designed Briquette Pressing Machine(easy to operation)
Biocoal Forming Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
Friday, June 24, 2011
Professional Biomass Briquette Machine for saw dust
Professional Biomass Briquette Machine for saw dust
1.CE Certification
2.Hot sale in Europe
3.Easy operation
Professional
Biomass
Briquette
Machine
for saw dust
·This Biomass Briquette Machine equipped with automatic temperature control system are designed to produce high density wood briquette.
·Biomass Briquetter Plant can make stick shape wood briquette of different diameter and different shape from biomass and agro-forest waste. Any type of Agro-Forestry waste can be used, such as Groundnut-shell ,Sugarcane residue, Saw dust , Coffee Husk , Paddy Straw ,Sunflower Stalk, Cotton Stalks ,Tobacco waste Mustard Stalk ,Jute waste , Bamboo Dust , Tea waste ,Wheat Straw , Palm husk, Soybeans husk , Rice Husks ,Forestry wastes , Wood Chips and many other Agro wastes. But the Moisture Content Should be Less than 12%, grain size is below 55mm.
·In the briquetting process lignin serves as the glue and combines the particles of wood together, thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal, quadrangular, square, etc. During this process, non-binder needs to be used. The biomass charcoal can replace the coal for use completely. It is becoming the most fashionable green fuel.
1.CE Certification
2.Hot sale in Europe
3.Easy operation
Professional
Biomass
Briquette
Machine
for saw dust
·This Biomass Briquette Machine equipped with automatic temperature control system are designed to produce high density wood briquette.
·Biomass Briquetter Plant can make stick shape wood briquette of different diameter and different shape from biomass and agro-forest waste. Any type of Agro-Forestry waste can be used, such as Groundnut-shell ,Sugarcane residue, Saw dust , Coffee Husk , Paddy Straw ,Sunflower Stalk, Cotton Stalks ,Tobacco waste Mustard Stalk ,Jute waste , Bamboo Dust , Tea waste ,Wheat Straw , Palm husk, Soybeans husk , Rice Husks ,Forestry wastes , Wood Chips and many other Agro wastes. But the Moisture Content Should be Less than 12%, grain size is below 55mm.
·In the briquetting process lignin serves as the glue and combines the particles of wood together, thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal, quadrangular, square, etc. During this process, non-binder needs to be used. The biomass charcoal can replace the coal for use completely. It is becoming the most fashionable green fuel.
Professional Briquette Screw Press Machine From Dyan
Biocoal Forming Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass briquette machine:
briquette forming machine,biomass briquette machine,charcoal briquette machine
Professional Cotton Shell Briquette Press Machine
Professional Cotton Shell Briquette Press Machine
1,Automatic heating device
2,Widely used
3,Reliable quality
Professional Cotton Shell Briquette Press Machine
Introduction:
Our company independently developed a new type of TRM--YKHP Series Centrifugal ring Die Briquetting machine mainly for renewable or recycled organic material’s density of the forming, including cotton shell crops, trees and other plants and livestock and poultry’s manure and other organic waste resources, This system can also be used to the density of the pasture processing. the whole production line can help you make the raw material to the stick charcoal directly. Save energy and high effciency
.
Effect:
Application:
1. Home heating stoves
2. Hot water boilers and the industrial boilers
3. Biomass power plants and so on.
Technology parameters:
Output: 1000~1200kg/h
Power: 30KW.
Speed:980(r/min)
Moisture of raw material:15--30(%)
The specification of the block:32*32
Model diameter:760(mm)
Hole number of model:30
Length of raw Material:3~60(mm)
Molding density: 0.8~1.4(t/m
3
)
If you are interested in our products, Just feel free email me or call me, It’s my pleasure to answer you all the questions which you care. My mobile: 86-18739102949
1,Automatic heating device
2,Widely used
3,Reliable quality
Professional Cotton Shell Briquette Press Machine
Introduction:
Our company independently developed a new type of TRM--YKHP Series Centrifugal ring Die Briquetting machine mainly for renewable or recycled organic material’s density of the forming, including cotton shell crops, trees and other plants and livestock and poultry’s manure and other organic waste resources, This system can also be used to the density of the pasture processing. the whole production line can help you make the raw material to the stick charcoal directly. Save energy and high effciency
.
Effect:
Application:
1. Home heating stoves
2. Hot water boilers and the industrial boilers
3. Biomass power plants and so on.
Technology parameters:
Output: 1000~1200kg/h
Power: 30KW.
Speed:980(r/min)
Moisture of raw material:15--30(%)
The specification of the block:32*32
Model diameter:760(mm)
Hole number of model:30
Length of raw Material:3~60(mm)
Molding density: 0.8~1.4(t/m
3
)
If you are interested in our products, Just feel free email me or call me, It’s my pleasure to answer you all the questions which you care. My mobile: 86-18739102949
Professional Hammer Mill
1.Reasonble price
2.Excellent quality
3.Low investment and energy consumption
4.Stable performance
Hammer Mill
Hammer mill is the most ideal milling equipment of all kinds of wood piece, straw, grass, stalk, tree branches, waste cardboard, bamboo, wood scraps, coconut shell, corn stalk, peanut shell, wheat stalk, wood fuel, cotton stalk, biomass shell and so on. This kind of hammer mill is widely used in foddor factory, Swine farm, wood factory, etc. Hammer mill is equipped with high carbon steel blade. The raw materials can be crushed into straw particles, whose diameter is 3-5 mm. The durable hammer mill works with high efficiency and gains more good reputation from European users.
main data:
Model
HM-I
HM-II
HM-III
HM-IV
HM-V
Power (kw)
4kw3phase
7.5kw3phase
11 kw, 3 phase
18.5 kw, 3 phase
22 kw, 3 phase
Capacity(kg/h)
100-300
400-500
500-600
700-800
900-1000
Diameter of raw material(mm)
Less than 50
Less than 50
Less than 50
Less than 50
Less than 50
Diameter,of,crushed,materials(mm)
3-5
3-5
3-5
3-5
1-3
Noise(DB)
Less than 60
Less than 60
Less than 60
Less than 60
Less than 60
Motor turning speed(R/min)
2600
2600
2600
2600
2600
Weight(kg)
250/300
350/400
400/450
490/560
510/580
Pack size(m)
1.3*1*0.8
1.4*1.2*1.2
1.5*1.2*1.5
1.66*1.2*1.77
1.72*1.3*1.83
We are one of the biggest manufacturers in China. Our machines have exported. If you are interested in our products, please be free to consult with us at any time.
Hammer
Final product
2.Excellent quality
3.Low investment and energy consumption
4.Stable performance
Hammer Mill
Hammer mill is the most ideal milling equipment of all kinds of wood piece, straw, grass, stalk, tree branches, waste cardboard, bamboo, wood scraps, coconut shell, corn stalk, peanut shell, wheat stalk, wood fuel, cotton stalk, biomass shell and so on. This kind of hammer mill is widely used in foddor factory, Swine farm, wood factory, etc. Hammer mill is equipped with high carbon steel blade. The raw materials can be crushed into straw particles, whose diameter is 3-5 mm. The durable hammer mill works with high efficiency and gains more good reputation from European users.
main data:
Model
HM-I
HM-II
HM-III
HM-IV
HM-V
Power (kw)
4kw3phase
7.5kw3phase
11 kw, 3 phase
18.5 kw, 3 phase
22 kw, 3 phase
Capacity(kg/h)
100-300
400-500
500-600
700-800
900-1000
Diameter of raw material(mm)
Less than 50
Less than 50
Less than 50
Less than 50
Less than 50
Diameter,of,crushed,materials(mm)
3-5
3-5
3-5
3-5
1-3
Noise(DB)
Less than 60
Less than 60
Less than 60
Less than 60
Less than 60
Motor turning speed(R/min)
2600
2600
2600
2600
2600
Weight(kg)
250/300
350/400
400/450
490/560
510/580
Pack size(m)
1.3*1*0.8
1.4*1.2*1.2
1.5*1.2*1.5
1.66*1.2*1.77
1.72*1.3*1.83
We are one of the biggest manufacturers in China. Our machines have exported. If you are interested in our products, please be free to consult with us at any time.
Hammer
Final product
Professional Solar Garden Stick Light
solar garden stick light
1.CE ISO RoHS
2.Long life battery
3.12V/24Vgarden light
4.Efficiency solar panel,controller
Solar Garden Stick
Light
Standing 7 feet tall, the Gama Sonic Single Solar Lamp Post is just what you need to add elegant lighting to your home's exterior. You'll love the easy operation of this beautiful solar lamppost: it automatically turns on at dusk and off at dawn, or you can alternatively choose to use the manual on/off switch. Six super-bright LED lights use a specially patented cone reflector to make the light brighter. The 19th-century gaslight design features beveled glass and classic appeal to your front or back yard.
1.CE ISO RoHS
2.Long life battery
3.12V/24Vgarden light
4.Efficiency solar panel,controller
Solar Garden Stick
Light
Standing 7 feet tall, the Gama Sonic Single Solar Lamp Post is just what you need to add elegant lighting to your home's exterior. You'll love the easy operation of this beautiful solar lamppost: it automatically turns on at dusk and off at dawn, or you can alternatively choose to use the manual on/off switch. Six super-bright LED lights use a specially patented cone reflector to make the light brighter. The 19th-century gaslight design features beveled glass and classic appeal to your front or back yard.
Professional Supplier Of Solar Led Garden Light
solar led garden light
1.CE ISO RoHS
2.Long life battery
3.12V/24Vgarden light
4.Efficiency solar panel,controller
Solar
Led Garden Light
Standing 7 feet tall, the Gama Sonic Single Solar Lamp Post is just what you need to add elegant lighting to your home's exterior. You'll love the easy operation of this beautiful solar lamppost: it automatically turns on at dusk and off at dawn, or you can alternatively choose to use the manual on/off switch. Six super-bright LED lights use a specially patented cone reflector to make the light brighter. The 19th-century gaslight design features beveled glass and classic appeal to your front or back yard.
1.CE ISO RoHS
2.Long life battery
3.12V/24Vgarden light
4.Efficiency solar panel,controller
Solar
Led Garden Light
Standing 7 feet tall, the Gama Sonic Single Solar Lamp Post is just what you need to add elegant lighting to your home's exterior. You'll love the easy operation of this beautiful solar lamppost: it automatically turns on at dusk and off at dawn, or you can alternatively choose to use the manual on/off switch. Six super-bright LED lights use a specially patented cone reflector to make the light brighter. The 19th-century gaslight design features beveled glass and classic appeal to your front or back yard.
Professional Supplier Of Solar Led Lawn Garden Light
solar led lawn garden light
1.CE ISO RoHS
2.Long life battery
3.12V/24Vgarden light
4.Efficiency solar panel,controller
Solar Led Lawn Garden
Light
Standing 7 feet tall, the Gama Sonic Single Solar Lamp Post is just what you need to add elegant lighting to your home's exterior. You'll love the easy operation of this beautiful solar lamppost: it automatically turns on at dusk and off at dawn, or you can alternatively choose to use the manual on/off switch. Six super-bright LED lights use a specially patented cone reflector to make the light brighter. The 19th-century gaslight design features beveled glass and classic appeal to your front or back yard.
1.CE ISO RoHS
2.Long life battery
3.12V/24Vgarden light
4.Efficiency solar panel,controller
Solar Led Lawn Garden
Light
Standing 7 feet tall, the Gama Sonic Single Solar Lamp Post is just what you need to add elegant lighting to your home's exterior. You'll love the easy operation of this beautiful solar lamppost: it automatically turns on at dusk and off at dawn, or you can alternatively choose to use the manual on/off switch. Six super-bright LED lights use a specially patented cone reflector to make the light brighter. The 19th-century gaslight design features beveled glass and classic appeal to your front or back yard.
2011 new model vertical wind turbine
new vertical wind turbine:
1.Low start-up wind speed
2.Low noise
3.High security and efficiency
new vertical wind turbine:
Product Name:off Grid Wind Turbine Generation 50W-5KW
Model No.:CTV-50W~5KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our VAWT:
Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.If you are interested in our VAWT, Please inform me anytime
1.Low start-up wind speed
2.Low noise
3.High security and efficiency
new vertical wind turbine:
Product Name:off Grid Wind Turbine Generation 50W-5KW
Model No.:CTV-50W~5KW OFF GRID
CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.
Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.
Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave
Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.
The picture of our VAWT:
Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.If you are interested in our VAWT, Please inform me anytime
Professional Supplier of Solar Led Street Light
solar led street light
1,CE ISO RoHS
2,Long life battery,lamp
3,12V/24V solar street light
4,Solar panel,controller
solar led street light
Features:
1. Illumination time is dusk to dawn and is fully automated via a photocell (light sensor).
2. The innovative and latest technology is employed to ensure optimum reliability and performance.
3. The solar street light head attaches to the support arm, which fixes to the street light pole. The street
light pole has an integral base which
can be bolted directly to a level, solid surface. A storage battery
box is
supplied to facilitate the rechargeable batteries.
Configuration Options of Solar Street Light
LED lights
36W, 50W, 60W, 80W, 100W(options)
Solar panel
80W, 100W, 120W, 150W, 180W(options)
Storage battery
120AH, 160AH, 200AH, 240AH(options)
Controller
12V/5A, 24V/10A(options)
Pole
6m, 8m, 10m, 12m,14m,16m(options)
Daily running hours
80hrs, 10hrs, 12hrs(options)
Autonomy days
3days, 4days, 6days(options)
Battery location
top of pole, bottom of pole, underground(options)
1,CE ISO RoHS
2,Long life battery,lamp
3,12V/24V solar street light
4,Solar panel,controller
solar led street light
Features:
1. Illumination time is dusk to dawn and is fully automated via a photocell (light sensor).
2. The innovative and latest technology is employed to ensure optimum reliability and performance.
3. The solar street light head attaches to the support arm, which fixes to the street light pole. The street
light pole has an integral base which
can be bolted directly to a level, solid surface. A storage battery
box is
supplied to facilitate the rechargeable batteries.
Configuration Options of Solar Street Light
LED lights
36W, 50W, 60W, 80W, 100W(options)
Solar panel
80W, 100W, 120W, 150W, 180W(options)
Storage battery
120AH, 160AH, 200AH, 240AH(options)
Controller
12V/5A, 24V/10A(options)
Pole
6m, 8m, 10m, 12m,14m,16m(options)
Daily running hours
80hrs, 10hrs, 12hrs(options)
Autonomy days
3days, 4days, 6days(options)
Battery location
top of pole, bottom of pole, underground(options)
Professional Wood Briquette Machine
Briquette Machine:
1.High production, energy-saving
2.Long durablity,good output
3.Easy to operate
4.Stable performance
Professional wood briquette machine
Biomass Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass Briquette Machine:
1.High production, energy-saving
2.Long durablity,good output
3.Easy to operate
4.Stable performance
Professional wood briquette machine
Biomass Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:
1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials
Working Principle of Sawdust Briquette Machine:
Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:
1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.
Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood
Biomass Briquette Machine:
Professional Wood Crusher With CE
1 .High efficiency
2.Stable performance
3.Competitive price
4.Easy to operate
Wood Crusher
Wood crusher is the special chipping/crushing equipment for raw wood of 50-250 mm (diameter). During the working process, the raw wood will be chipped, re-crushed and sieved, the wood crusher combines both chipping and crushing in one machine to get the wood sawdust directly. The diameter of wood sawdust can reach to 2-5 mm, which is suitable for further drying and briquetting. No need to use other wood chippers. It also can used for crushing bamboo,straw,couch grass,sorghum straw etc.The final products can make high density board,small flakeboard,and the material edible mushrooms or choarcoal making etc.Wood crusher shows the advantages of precise structure, high capacity, energy consumption, high-quality finished products, easy maintenance, etc.
Main data:
Model
FS-I
FS-II
FS-III
Power (kw)
11kw,3phase
15kw, 3 phase
30kw,3phase
Capacity(kg/h)
400-500
700-800
800-1000
Diameter of raw material(mm)
50-200
50-200
100-300
Diameter,of,crushed,materials(mm)
3-5
3-5
3-5
Feed materials
Wood,logs,etc
wood logs, etc
Wood,logs,etc
Noise(DB)
80
80
80
Motor turning speed(R/min)
1900
1900
1900
Weight(kg)
325/375
450/500
850/950
Pack size(m)
1.3*0.9*1
1.5*1.05*1.2
1.9*1.2*1.3
Engine
Diesel engine is also available
Diesel engine is also available
Diesel engine is also available
We are one of the biggest manufacturers in China. Our machines have exported. If you are interested in our products, please be free to consult with us at any
Raw material
Final product
2.Stable performance
3.Competitive price
4.Easy to operate
Wood Crusher
Wood crusher is the special chipping/crushing equipment for raw wood of 50-250 mm (diameter). During the working process, the raw wood will be chipped, re-crushed and sieved, the wood crusher combines both chipping and crushing in one machine to get the wood sawdust directly. The diameter of wood sawdust can reach to 2-5 mm, which is suitable for further drying and briquetting. No need to use other wood chippers. It also can used for crushing bamboo,straw,couch grass,sorghum straw etc.The final products can make high density board,small flakeboard,and the material edible mushrooms or choarcoal making etc.Wood crusher shows the advantages of precise structure, high capacity, energy consumption, high-quality finished products, easy maintenance, etc.
Main data:
Model
FS-I
FS-II
FS-III
Power (kw)
11kw,3phase
15kw, 3 phase
30kw,3phase
Capacity(kg/h)
400-500
700-800
800-1000
Diameter of raw material(mm)
50-200
50-200
100-300
Diameter,of,crushed,materials(mm)
3-5
3-5
3-5
Feed materials
Wood,logs,etc
wood logs, etc
Wood,logs,etc
Noise(DB)
80
80
80
Motor turning speed(R/min)
1900
1900
1900
Weight(kg)
325/375
450/500
850/950
Pack size(m)
1.3*0.9*1
1.5*1.05*1.2
1.9*1.2*1.3
Engine
Diesel engine is also available
Diesel engine is also available
Diesel engine is also available
We are one of the biggest manufacturers in China. Our machines have exported. If you are interested in our products, please be free to consult with us at any
Raw material
Final product
Professional ball press machine
High quality ball press machine
(1)High quality!
(2)High efficiency!
(3)High reputation!
(4)competitive price
Product item:
High quality ball press machine
Product specification:
ball press machine for coal powder is widely used in the
metallurgy,mining,coal,refractory,abrasive,fertillzer,ceramics,etc.The raw materials can be carbonized first and then produced into briquettes shape in charcoal powder briquette machine.
Technical data:
Model
Roller
Dia.(mm)
Power(KW)
Capacity(T/h)
T290
290
5.5
1-3
T360
360
7.5
4-6
T430
430
15
6-8
(1)High quality!
(2)High efficiency!
(3)High reputation!
(4)competitive price
Product item:
High quality ball press machine
Product specification:
ball press machine for coal powder is widely used in the
metallurgy,mining,coal,refractory,abrasive,fertillzer,ceramics,etc.The raw materials can be carbonized first and then produced into briquettes shape in charcoal powder briquette machine.
Technical data:
Model
Roller
Dia.(mm)
Power(KW)
Capacity(T/h)
T290
290
5.5
1-3
T360
360
7.5
4-6
T430
430
15
6-8
Professional ball press machine
High quality coal ball machine
(1)High quality!
(2)High efficiency!
(3)High reputation!
(4)competitive price
Product item:
High quality coal ball machine
Product specification:
coal ball machine for coal powder is widely used in the
metallurgy,mining,coal,refractory,abrasive,fertillzer,ceramics,etc.The raw materials can be carbonized first and then produced into briquettes shape in charcoal powder briquette machine.
Technical data:
Model
Roller
Dia.(mm)
Power(KW)
Capacity(T/h)
T290
290
5.5
1-3
T360
360
7.5
4-6
T430
430
15
6-8
(1)High quality!
(2)High efficiency!
(3)High reputation!
(4)competitive price
Product item:
High quality coal ball machine
Product specification:
coal ball machine for coal powder is widely used in the
metallurgy,mining,coal,refractory,abrasive,fertillzer,ceramics,etc.The raw materials can be carbonized first and then produced into briquettes shape in charcoal powder briquette machine.
Technical data:
Model
Roller
Dia.(mm)
Power(KW)
Capacity(T/h)
T290
290
5.5
1-3
T360
360
7.5
4-6
T430
430
15
6-8
Professional biomass briquette machine
Our biomass briquette machine shows the features of high capacity,low energy consumption.
Our biomass briquette machine are awarded 2 patents ( patent number: 200530100650.5, 200520031212.2),and show the featurs of big capacity, low energy consumption, compact and durable. Many performance data such as capacity, coal bar density, eletricity consumption and wearable degree have reached advanced level. Our newly developed biomass briquette machine can be used as charcoal powder shaping machine by replacement of some spare parts.
Type
Power
Output
Inlet particle size
Dimension
Inlet Dimension
Weight
Material Water content
IV
15kw
140-200kg/h
<5mm
1.67*0.68*1.55m
130*160mm
0.6T
≤12%
III
11kw
80-150kg/h
<5mm
1.67*0.68*1.55m
0.58T
Our biomass briquette machine are awarded 2 patents ( patent number: 200530100650.5, 200520031212.2),and show the featurs of big capacity, low energy consumption, compact and durable. Many performance data such as capacity, coal bar density, eletricity consumption and wearable degree have reached advanced level. Our newly developed biomass briquette machine can be used as charcoal powder shaping machine by replacement of some spare parts.
Type
Power
Output
Inlet particle size
Dimension
Inlet Dimension
Weight
Material Water content
IV
15kw
140-200kg/h
<5mm
1.67*0.68*1.55m
130*160mm
0.6T
≤12%
III
11kw
80-150kg/h
<5mm
1.67*0.68*1.55m
0.58T
Professional briquette machine for coal powder
briquette machine for coal powder is used in coal, metallurgical powder, powder cold-pressing ball, refractory materials.
Honeycomb coal briquette machine for coal powder is used in coal, metallurgical powder, powder cold-pressing ball, refractory materials (for burning and house heating etc...)
Our machine has features of high productivity, significant energy-saving, easy to use, safe, reliable, easy to maintain, use low-cost, is the ideal honeycomb processing equipment. It can process Circular honeycomb, a variety of sizes, number of holes can meet the specifications required.
Honeycomb coal briquette machine for coal powder have been mainly used in home fire, heating with anthracite honeycomb made of cylindrical briquettes. Previously been processed into the coal sphere slightly larger than ping-pong, and later the coal processed into one cylinder, and marked with a number of holes inside the cylinder, because it can increase the surface area of coal, so that the full combustion of coal, to reduce resource waste.
Technical Data:
Model
Standard of coal (mm)
Power
(kw)
Capacity
(pcs/ h.)
Weight
(ton)
Size
(mm)
FM-120
φ98×80 φ100×80 φ102×80
φ125×80 φ126×80
95×95×80
5.5
2700
1.5
1430×1050×1620
FM-140
φ120×80 φ125×80 φ140×80
100×100×85
7.5
2700
2.0
1600×1790×1770
FM-160
φ140×80 φ150×80 φ162×80
120×120×90
7.5
2700
2.5
1460×2200×2000
Honeycomb coal briquette machine for coal powder is used in coal, metallurgical powder, powder cold-pressing ball, refractory materials (for burning and house heating etc...)
Our machine has features of high productivity, significant energy-saving, easy to use, safe, reliable, easy to maintain, use low-cost, is the ideal honeycomb processing equipment. It can process Circular honeycomb, a variety of sizes, number of holes can meet the specifications required.
Honeycomb coal briquette machine for coal powder have been mainly used in home fire, heating with anthracite honeycomb made of cylindrical briquettes. Previously been processed into the coal sphere slightly larger than ping-pong, and later the coal processed into one cylinder, and marked with a number of holes inside the cylinder, because it can increase the surface area of coal, so that the full combustion of coal, to reduce resource waste.
Technical Data:
Model
Standard of coal (mm)
Power
(kw)
Capacity
(pcs/ h.)
Weight
(ton)
Size
(mm)
FM-120
φ98×80 φ100×80 φ102×80
φ125×80 φ126×80
95×95×80
5.5
2700
1.5
1430×1050×1620
FM-140
φ120×80 φ125×80 φ140×80
100×100×85
7.5
2700
2.0
1600×1790×1770
FM-160
φ140×80 φ150×80 φ162×80
120×120×90
7.5
2700
2.5
1460×2200×2000
Professional briquette machine
Our charcoal briquette machine shows the featurs of big capacity, low energy consumption, compact and durable.
Our charcoal briquette machine is awarded 2 patents (patent number: 200530100650.5, 200520031212.2) and shows the features of high capacity, low energy consumption, compact and durable. Many performance data such as capacity, wood briquettes density, electricity consumption and wearable degree has reached advanced level. charcoal briquette machine can be used as charcoal powder briquette machine by replacement of some spare parts. The out diameter of finished briquettes is 40-80cm.
Type
Power
Capacity
Inlet particle size
Dimension
Inlet Dimension
Weight
MaterialWater content
IV
15kw
140-200kg/h
≤5mm
1.67*0.68*1.55m
130*160mm
0.6T
<=12%
III
11kw
80-150kg/h
≤5mm
1.67*0.68*1.55m
0.58T
Our charcoal briquette machine is awarded 2 patents (patent number: 200530100650.5, 200520031212.2) and shows the features of high capacity, low energy consumption, compact and durable. Many performance data such as capacity, wood briquettes density, electricity consumption and wearable degree has reached advanced level. charcoal briquette machine can be used as charcoal powder briquette machine by replacement of some spare parts. The out diameter of finished briquettes is 40-80cm.
Type
Power
Capacity
Inlet particle size
Dimension
Inlet Dimension
Weight
MaterialWater content
IV
15kw
140-200kg/h
≤5mm
1.67*0.68*1.55m
130*160mm
0.6T
<=12%
III
11kw
80-150kg/h
≤5mm
1.67*0.68*1.55m
0.58T
Professional briquette making machine
High quality briquette making machine
(1)High quality!
(2)High efficiency!
(3)High reputation!
(4)competitive price
Product item:
High quality briquette making machine
Product specification:
briquette making machine for coal powder is widely used in the
metallurgy,mining,coal,refractory,abrasive,fertillzer,ceramics,etc.The raw materials can be carbonized first and then produced into briquettes shape in charcoal powder briquette machine.
Technical data:
Model
Roller
Dia.(mm)
Power(KW)
Capacity(T/h)
T290
290
5.5
1-3
T360
360
7.5
4-6
T430
430
15
6-8
(1)High quality!
(2)High efficiency!
(3)High reputation!
(4)competitive price
Product item:
High quality briquette making machine
Product specification:
briquette making machine for coal powder is widely used in the
metallurgy,mining,coal,refractory,abrasive,fertillzer,ceramics,etc.The raw materials can be carbonized first and then produced into briquettes shape in charcoal powder briquette machine.
Technical data:
Model
Roller
Dia.(mm)
Power(KW)
Capacity(T/h)
T290
290
5.5
1-3
T360
360
7.5
4-6
T430
430
15
6-8
Professional briquettes making machine
briquettes making machine is used in coal, metallurgical powder, powder cold-pressing ball, refractory materials.
Honeycom briquettes making machine is used in coal, metallurgical powder, powder cold-pressing ball, refractory materials (for burning and house heating etc...)
Our machine has features of high productivity, significant energy-saving, easy to use, safe, reliable, easy to maintain, use low-cost, is the ideal honeycomb processing equipment. It can process Circular honeycomb, a variety of sizes, number of holes can meet the specifications required.
briquettes making machine have been mainly used in home fire, heating with anthracite honeycomb made of cylindrical briquettes. Previously been processed into the coal sphere slightly larger than ping-pong, and later the coal processed into one cylinder, and marked with a number of holes inside the cylinder, because it can increase the surface area of coal, so that the full combustion of coal, to reduce resource waste.
Technical Data:
Model
Standard of coal (mm)
Power
(kw)
Capacity
(pcs/ h.)
Weight
(ton)
Size
(mm)
FM-120
φ98×80 φ100×80 φ102×80
φ125×80 φ126×80
95×95×80
5.5
2700
1.5
1430×1050×1620
FM-140
φ120×80 φ125×80 φ140×80
100×100×85
7.5
2700
2.0
1600×1790×1770
FM-160
φ140×80 φ150×80 φ162×80
120×120×90
7.5
2700
2.5
1460×2200×2000
Honeycom briquettes making machine is used in coal, metallurgical powder, powder cold-pressing ball, refractory materials (for burning and house heating etc...)
Our machine has features of high productivity, significant energy-saving, easy to use, safe, reliable, easy to maintain, use low-cost, is the ideal honeycomb processing equipment. It can process Circular honeycomb, a variety of sizes, number of holes can meet the specifications required.
briquettes making machine have been mainly used in home fire, heating with anthracite honeycomb made of cylindrical briquettes. Previously been processed into the coal sphere slightly larger than ping-pong, and later the coal processed into one cylinder, and marked with a number of holes inside the cylinder, because it can increase the surface area of coal, so that the full combustion of coal, to reduce resource waste.
Technical Data:
Model
Standard of coal (mm)
Power
(kw)
Capacity
(pcs/ h.)
Weight
(ton)
Size
(mm)
FM-120
φ98×80 φ100×80 φ102×80
φ125×80 φ126×80
95×95×80
5.5
2700
1.5
1430×1050×1620
FM-140
φ120×80 φ125×80 φ140×80
100×100×85
7.5
2700
2.0
1600×1790×1770
FM-160
φ140×80 φ150×80 φ162×80
120×120×90
7.5
2700
2.5
1460×2200×2000
2011 new product ego with many kind of catridges
ego features
with many kind of cartridges
larger vapor
no tar&no cigarette butts
no ash&no burning
ego detailed information
Quick Details:
Properties: Electronic Cigarette Brand Name: EGO Place of Origin :Guangdong China(mainland)
Model Number:EGO Various Color: Black/Silvery/White/Gold
Battery Capacity:700mAH/900mAH/1100mAH/1300mAH
Ecigarette Ego
Features :
Length : 130-145mm
Diameter : 14mm
Battery capacity : 700mAH/900mAH/1100mAH/1300mAH
Cartomizer : disposable , 50mm ,280 - 450 puffs
A golden/silvery decerative ring in the battery
Special appearance ,beautiful design , tons of vapors ,long battery life
Model
ego
size
L 130/145/155mm * D 14mm
battery capacity
700mAh normal , 1300mAh is avaialble
battery life
300 charging cycles
charging time
2- 3 hours
cartomizer puffs
700-1300 puffs
fully charged battery puffs
700mAh-700puffs ,900mAh-1000 puffs,1100mAh-1300puffs
LED color
blue ,
e cigarette color
black is common color , stainless steel and pink are avaialble
Each set includes
5 pcs Atomized cartridge
2 pcs Battery
2 pcs Atomizer
1 pc Arotect cap
1 pc USB changer
1 pc Wall charger
1 pc Chager adapter
1 pc manual
Packaging &Delivery:
Packaging Dtail: High grage colored gift box
Delivery Detail: Two days for the samples , In 3-7 working days for orders (100-1000sets)
with many kind of cartridges
larger vapor
no tar&no cigarette butts
no ash&no burning
ego detailed information
Quick Details:
Properties: Electronic Cigarette Brand Name: EGO Place of Origin :Guangdong China(mainland)
Model Number:EGO Various Color: Black/Silvery/White/Gold
Battery Capacity:700mAH/900mAH/1100mAH/1300mAH
Ecigarette Ego
Features :
Length : 130-145mm
Diameter : 14mm
Battery capacity : 700mAH/900mAH/1100mAH/1300mAH
Cartomizer : disposable , 50mm ,280 - 450 puffs
A golden/silvery decerative ring in the battery
Special appearance ,beautiful design , tons of vapors ,long battery life
Model
ego
size
L 130/145/155mm * D 14mm
battery capacity
700mAh normal , 1300mAh is avaialble
battery life
300 charging cycles
charging time
2- 3 hours
cartomizer puffs
700-1300 puffs
fully charged battery puffs
700mAh-700puffs ,900mAh-1000 puffs,1100mAh-1300puffs
LED color
blue ,
e cigarette color
black is common color , stainless steel and pink are avaialble
Each set includes
5 pcs Atomized cartridge
2 pcs Battery
2 pcs Atomizer
1 pc Arotect cap
1 pc USB changer
1 pc Wall charger
1 pc Chager adapter
1 pc manual
Packaging &Delivery:
Packaging Dtail: High grage colored gift box
Delivery Detail: Two days for the samples , In 3-7 working days for orders (100-1000sets)
Professional carboning stove for wood
hoist loading carboning stove can hoist the charcoal outside for cooling, the productive efficiency increase a lot
The hoist loading carboning stove is our new invent, which is also combined type. The charcoal can be hoisted outside, in this way the cooling time can be reduced much, thus, the productive efficiency increases a lot. It is the ideal choice for mass production of charcoal.
This type of carboning stove adopts the structure of unique air storage chamber, to fully reuse the smoke produced during the process of carbonization. And 60% of the redundant smoke can be used in drying and carbonizing, saving much fuel during the whole process, and increasing the enterprise revenue.
Model
Capacity of stick(kg)
Final production of coal(kg)
Time of carbonization(h)
Time of cooling(h)
Total time
Weight(including the inner pot)
Dimension
DZ-260
650
260
6--8
10
16-18
2.2T
1.55*1.55*2.07m
DZ-500
1250
500
6--8
12
18-20
2.8T
1.92*1.92*2.07m
DZ-1000
2500
1000
10—12
24
34-36
3.7T
2.2*2.2*2.22m
The hoist loading carboning stove is our new invent, which is also combined type. The charcoal can be hoisted outside, in this way the cooling time can be reduced much, thus, the productive efficiency increases a lot. It is the ideal choice for mass production of charcoal.
This type of carboning stove adopts the structure of unique air storage chamber, to fully reuse the smoke produced during the process of carbonization. And 60% of the redundant smoke can be used in drying and carbonizing, saving much fuel during the whole process, and increasing the enterprise revenue.
Model
Capacity of stick(kg)
Final production of coal(kg)
Time of carbonization(h)
Time of cooling(h)
Total time
Weight(including the inner pot)
Dimension
DZ-260
650
260
6--8
10
16-18
2.2T
1.55*1.55*2.07m
DZ-500
1250
500
6--8
12
18-20
2.8T
1.92*1.92*2.07m
DZ-1000
2500
1000
10—12
24
34-36
3.7T
2.2*2.2*2.22m
Professional charcoal briquette machine
Our charcoal briquette machine shows the featurs of big capacity, low energy consumption, compact and durable.
Our charcoal briquette machine is awarded 2 patents (patent number: 200530100650.5, 200520031212.2) and shows the features of high capacity, low energy consumption, compact and durable. Many performance data such as capacity, wood briquettes density, electricity consumption and wearable degree has reached advanced level. wood briquette machinery can be used as charcoal powder briquette machine by replacement of some spare parts. The out diameter of finished briquettes is 40-80cm.
Type
Power
Capacity
Inlet particle size
Dimension
Inlet Dimension
Weight
MaterialWater content
IV
15kw
140-200kg/h
≤5mm
1.67*0.68*1.55m
130*160mm
0.6T
<=12%
III
11kw
80-150kg/h
≤5mm
1.67*0.68*1.55m
0.58T
Our charcoal briquette machine is awarded 2 patents (patent number: 200530100650.5, 200520031212.2) and shows the features of high capacity, low energy consumption, compact and durable. Many performance data such as capacity, wood briquettes density, electricity consumption and wearable degree has reached advanced level. wood briquette machinery can be used as charcoal powder briquette machine by replacement of some spare parts. The out diameter of finished briquettes is 40-80cm.
Type
Power
Capacity
Inlet particle size
Dimension
Inlet Dimension
Weight
MaterialWater content
IV
15kw
140-200kg/h
≤5mm
1.67*0.68*1.55m
130*160mm
0.6T
<=12%
III
11kw
80-150kg/h
≤5mm
1.67*0.68*1.55m
0.58T
Professional charcoal making machine
Our charcoal making machine shows the featurs of big capacity, low energy consumption, compact and durable.
Our charcoal making machine is awarded 2 patents (patent number: 200530100650.5, 200520031212.2) and shows the features of high capacity, low energy consumption, compact and durable. Many performance data such as capacity, wood briquettes density, electricity consumption and wearable degree has reached advanced level. wood briquette machinery can be used as charcoal powder briquette machine by replacement of some spare parts. The out diameter of finished briquettes is 40-80cm.
Type
Power
Capacity
Inlet particle size
Dimension
Inlet Dimension
Weight
MaterialWater content
IV
15kw
140-200kg/h
≤5mm
1.67*0.68*1.55m
130*160mm
0.6T
<=12%
III
11kw
80-150kg/h
≤5mm
1.67*0.68*1.55m
0.58T
Gongyi Sanjin Charcoal Machinery Factory, founded in 1988 and located in Gongyi City, Henan Province,China, is a specialized charcoal machine manufacturing enterprise combining sales, service , scientific and technological research .
We are a PRC import and export enterprise, our products have The ISO9001:2000 international quality authentication.
After two decades' development, we can supply 3 series of equipments including more than 30 machines: charcoal making equipments, equipments of making charcoal and combustible gas by straw and stalk, combining manufacturing equipments of charcoal, wood tar and organic fertilizer.
Based on our professional technology, advanced manufacturing equipments, perfect aftersales service and sustained technological improvement, our products have been awarded 10 patents in China, and are widely accpeted in both domestic and world market, and also exported to more than 30 countries, such as England, Russia, Sweden, Malaysia, Indonesia, Vietnam, etc.
Gongyi Sanjin Charcoal Machinery Factory, founded in 1988 and located in Gongyi City, Henan Province,China, is a specialized charcoal machine manufacturing enterprise combining sales, service , scientific and technological research .
We are a PRC import and export enterprise, our products have The ISO9001:2000 international quality authentication.
After two decades' development, we can supply 3 series of equipments including more than 30 machines: charcoal making machine, and combustible gas by straw and stalk, combining manufacturing equipments of charcoal, wood tar and organic fertilizer.
Based on our professional technology, advanced manufacturing equipments, perfect aftersales service and sustained technological improvement, our products have been awarded 10 patents in China, and are widely accpeted in both domestic and world market, and also exported to more than 30 countries, such as England, Russia, Sweden, Malaysia, Indonesia, Vietnam, etc.
Our charcoal making machine is awarded 2 patents (patent number: 200530100650.5, 200520031212.2) and shows the features of high capacity, low energy consumption, compact and durable. Many performance data such as capacity, wood briquettes density, electricity consumption and wearable degree has reached advanced level. wood briquette machinery can be used as charcoal powder briquette machine by replacement of some spare parts. The out diameter of finished briquettes is 40-80cm.
Type
Power
Capacity
Inlet particle size
Dimension
Inlet Dimension
Weight
MaterialWater content
IV
15kw
140-200kg/h
≤5mm
1.67*0.68*1.55m
130*160mm
0.6T
<=12%
III
11kw
80-150kg/h
≤5mm
1.67*0.68*1.55m
0.58T
Gongyi Sanjin Charcoal Machinery Factory, founded in 1988 and located in Gongyi City, Henan Province,China, is a specialized charcoal machine manufacturing enterprise combining sales, service , scientific and technological research .
We are a PRC import and export enterprise, our products have The ISO9001:2000 international quality authentication.
After two decades' development, we can supply 3 series of equipments including more than 30 machines: charcoal making equipments, equipments of making charcoal and combustible gas by straw and stalk, combining manufacturing equipments of charcoal, wood tar and organic fertilizer.
Based on our professional technology, advanced manufacturing equipments, perfect aftersales service and sustained technological improvement, our products have been awarded 10 patents in China, and are widely accpeted in both domestic and world market, and also exported to more than 30 countries, such as England, Russia, Sweden, Malaysia, Indonesia, Vietnam, etc.
Gongyi Sanjin Charcoal Machinery Factory, founded in 1988 and located in Gongyi City, Henan Province,China, is a specialized charcoal machine manufacturing enterprise combining sales, service , scientific and technological research .
We are a PRC import and export enterprise, our products have The ISO9001:2000 international quality authentication.
After two decades' development, we can supply 3 series of equipments including more than 30 machines: charcoal making machine, and combustible gas by straw and stalk, combining manufacturing equipments of charcoal, wood tar and organic fertilizer.
Based on our professional technology, advanced manufacturing equipments, perfect aftersales service and sustained technological improvement, our products have been awarded 10 patents in China, and are widely accpeted in both domestic and world market, and also exported to more than 30 countries, such as England, Russia, Sweden, Malaysia, Indonesia, Vietnam, etc.
Professional charcoal powder press machine
High quality charcoal powder press machine
(1)High quality!
(2)High efficiency!
(3)High reputation!
(4)competitive price
Product item:
High quality charcoal powder press machine
Product specification:
charcoal powder press machine is widely used in the
metallurgy,mining,coal,refractory,abrasive,fertillzer,ceramics,etc.The raw materials can be carbonized first and then produced into briquettes shape in charcoal powder briquette machine.
Technical data:
Model
Roller
Dia.(mm)
Power(KW)
Capacity(T/h)
T290
290
5.5
1-3
T360
360
7.5
4-6
T430
430
15
6-8
(1)High quality!
(2)High efficiency!
(3)High reputation!
(4)competitive price
Product item:
High quality charcoal powder press machine
Product specification:
charcoal powder press machine is widely used in the
metallurgy,mining,coal,refractory,abrasive,fertillzer,ceramics,etc.The raw materials can be carbonized first and then produced into briquettes shape in charcoal powder briquette machine.
Technical data:
Model
Roller
Dia.(mm)
Power(KW)
Capacity(T/h)
T290
290
5.5
1-3
T360
360
7.5
4-6
T430
430
15
6-8
Professional charcoal press machine
Our charcoal press machine shows the featurs of big capacity, low energy consumption, compact and durable.
Our charcoal press machine is awarded 2 patents (patent number: 200530100650.5, 200520031212.2) and shows the features of high capacity, low energy consumption, compact and durable. Many performance data such as capacity, wood briquettes density, electricity consumption and wearable degree has reached advanced level. charcoal press machine can be used as charcoal powder briquette machine by replacement of some spare parts. The out diameter of finished briquettes is 40-80cm.
Type
Power
Capacity
Inlet particle size
Dimension
Inlet Dimension
Weight
MaterialWater content
IV
15kw
140-200kg/h
≤5mm
1.67*0.68*1.55m
130*160mm
0.6T
<=12%
III
11kw
80-150kg/h
≤5mm
1.67*0.68*1.55m
0.58T
Our charcoal press machine is awarded 2 patents (patent number: 200530100650.5, 200520031212.2) and shows the features of high capacity, low energy consumption, compact and durable. Many performance data such as capacity, wood briquettes density, electricity consumption and wearable degree has reached advanced level. charcoal press machine can be used as charcoal powder briquette machine by replacement of some spare parts. The out diameter of finished briquettes is 40-80cm.
Type
Power
Capacity
Inlet particle size
Dimension
Inlet Dimension
Weight
MaterialWater content
IV
15kw
140-200kg/h
≤5mm
1.67*0.68*1.55m
130*160mm
0.6T
<=12%
III
11kw
80-150kg/h
≤5mm
1.67*0.68*1.55m
0.58T
Professional coal ball machine
High quality coal ball machine
(1)High quality!
(2)High efficiency!
(3)High reputation!
(4)competitive price
Product item:
High quality coal ball machine
Product specification:
coal ball machine for coal powder is widely used in the
metallurgy,mining,coal,refractory,abrasive,fertillzer,ceramics,etc.The raw materials can be carbonized first and then produced into briquettes shape in charcoal powder briquette machine.
Technical data:
Model
Roller
Dia.(mm)
Power(KW)
Capacity(T/h)
T290
290
5.5
1-3
T360
360
7.5
4-6
T430
430
15
6-8
(1)High quality!
(2)High efficiency!
(3)High reputation!
(4)competitive price
Product item:
High quality coal ball machine
Product specification:
coal ball machine for coal powder is widely used in the
metallurgy,mining,coal,refractory,abrasive,fertillzer,ceramics,etc.The raw materials can be carbonized first and then produced into briquettes shape in charcoal powder briquette machine.
Technical data:
Model
Roller
Dia.(mm)
Power(KW)
Capacity(T/h)
T290
290
5.5
1-3
T360
360
7.5
4-6
T430
430
15
6-8
Professional coal ball press machine
coal ball press machine
(1)High quality!
(2)High efficiency!
(3)High reputation!
(4)competitive price
Product item:
coal ball press machine
Product specification:
coal ball ball press machine is widely used in the
metallurgy,mining,coal,refractory,abrasive,fertillzer,ceramics,etc.The raw materials can be carbonized first and then produced into briquettes shape in charcoal powder briquette machine.
Technical data:
Model
Roller
Dia.(mm)
Power(KW)
Capacity(T/h)
T290
290
5.5
1-3
T360
360
7.5
4-6
T430
430
15
6-8
(1)High quality!
(2)High efficiency!
(3)High reputation!
(4)competitive price
Product item:
coal ball press machine
Product specification:
coal ball ball press machine is widely used in the
metallurgy,mining,coal,refractory,abrasive,fertillzer,ceramics,etc.The raw materials can be carbonized first and then produced into briquettes shape in charcoal powder briquette machine.
Technical data:
Model
Roller
Dia.(mm)
Power(KW)
Capacity(T/h)
T290
290
5.5
1-3
T360
360
7.5
4-6
T430
430
15
6-8
Professional coal briquette machine
coal briquette press machine for coal powder is used in coal, metallurgical powder, powder cold-pressing ball
Honeycomb coal briquette press machine for coal powder is used in coal, metallurgical powder, powder cold-pressing ball, refractory materials (for burning and house heating etc...)
Our machine has features of high productivity, significant energy-saving, easy to use, safe, reliable, easy to maintain, use low-cost, is the ideal honeycomb processing equipment. It can process Circular honeycomb, a variety of sizes, number of holes can meet the specifications required.
Honeycomb coal briquette press machine for coal powder have been mainly used in home fire, heating with anthracite honeycomb made of cylindrical briquettes. Previously been processed into the coal sphere slightly larger than ping-pong, and later the coal processed into one cylinder, and marked with a number of holes inside the cylinder, because it can increase the surface area of coal, so that the full combustion of coal, to reduce resource waste.
Technical Data:
Model
Standard of coal (mm)
Power
(kw)
Capacity
(pcs/ h.)
Weight
(ton)
Size
(mm)
FM-120
φ98×80 φ100×80 φ102×80
φ125×80 φ126×80
95×95×80
5.5
2700
1.5
1430×1050×1620
FM-140
φ120×80 φ125×80 φ140×80
100×100×85
7.5
2700
2.0
1600×1790×1770
FM-160
φ140×80 φ150×80 φ162×80
120×120×90
7.5
2700
2.5
1460×2200×2000
Honeycomb coal briquette press machine for coal powder is used in coal, metallurgical powder, powder cold-pressing ball, refractory materials (for burning and house heating etc...)
Our machine has features of high productivity, significant energy-saving, easy to use, safe, reliable, easy to maintain, use low-cost, is the ideal honeycomb processing equipment. It can process Circular honeycomb, a variety of sizes, number of holes can meet the specifications required.
Honeycomb coal briquette press machine for coal powder have been mainly used in home fire, heating with anthracite honeycomb made of cylindrical briquettes. Previously been processed into the coal sphere slightly larger than ping-pong, and later the coal processed into one cylinder, and marked with a number of holes inside the cylinder, because it can increase the surface area of coal, so that the full combustion of coal, to reduce resource waste.
Technical Data:
Model
Standard of coal (mm)
Power
(kw)
Capacity
(pcs/ h.)
Weight
(ton)
Size
(mm)
FM-120
φ98×80 φ100×80 φ102×80
φ125×80 φ126×80
95×95×80
5.5
2700
1.5
1430×1050×1620
FM-140
φ120×80 φ125×80 φ140×80
100×100×85
7.5
2700
2.0
1600×1790×1770
FM-160
φ140×80 φ150×80 φ162×80
120×120×90
7.5
2700
2.5
1460×2200×2000
Professional coal briquette machine for coal powder
High quality coal briquette machine
(1)High quality!
(2)High efficiency!
(3)High reputation!
(4)competitive price
Product item:
High quality coal briquette machine
Product specification:
coal briquette machine for coal powder is widely used in the
metallurgy,mining,coal,refractory,abrasive,fertillzer,ceramics,etc.The raw materials can be carbonized first and then produced into briquettes shape in charcoal powder briquette machine.
Technical data:
Model
Roller
Dia.(mm)
Power(KW)
Capacity(T/h)
T290
290
5.5
1-3
T360
360
7.5
4-6
T430
430
15
6-8
(1)High quality!
(2)High efficiency!
(3)High reputation!
(4)competitive price
Product item:
High quality coal briquette machine
Product specification:
coal briquette machine for coal powder is widely used in the
metallurgy,mining,coal,refractory,abrasive,fertillzer,ceramics,etc.The raw materials can be carbonized first and then produced into briquettes shape in charcoal powder briquette machine.
Technical data:
Model
Roller
Dia.(mm)
Power(KW)
Capacity(T/h)
T290
290
5.5
1-3
T360
360
7.5
4-6
T430
430
15
6-8
Thursday, June 23, 2011
Professional coal briquette making machine
coal briquette making machine for coal powder is used in coal, metallurgical powder, powder cold-pressing ball
Honeycomb coal briquette making machine for coal powder is used in coal, metallurgical powder, powder cold-pressing ball, refractory materials (for burning and house heating etc...)
Our machine has features of high productivity, significant energy-saving, easy to use, safe, reliable, easy to maintain, use low-cost, is the ideal honeycomb processing equipment. It can process Circular honeycomb, a variety of sizes, number of holes can meet the specifications required.
Honeycomb coal briquette making machine for coal powder have been mainly used in home fire, heating with anthracite honeycomb made of cylindrical briquettes. Previously been processed into the coal sphere slightly larger than ping-pong, and later the coal processed into one cylinder, and marked with a number of holes inside the cylinder, because it can increase the surface area of coal, so that the full combustion of coal, to reduce resource waste.
Technical Data:
Model
Standard of coal (mm)
Power
(kw)
Capacity
(pcs/ h.)
Weight
(ton)
Size
(mm)
FM-120
φ98×80 φ100×80 φ102×80
φ125×80 φ126×80
95×95×80
5.5
2700
1.5
1430×1050×1620
FM-140
φ120×80 φ125×80 φ140×80
100×100×85
7.5
2700
2.0
1600×1790×1770
FM-160
φ140×80 φ150×80 φ162×80
120×120×90
7.5
2700
2.5
1460×2200×2000
Honeycomb coal briquette making machine for coal powder is used in coal, metallurgical powder, powder cold-pressing ball, refractory materials (for burning and house heating etc...)
Our machine has features of high productivity, significant energy-saving, easy to use, safe, reliable, easy to maintain, use low-cost, is the ideal honeycomb processing equipment. It can process Circular honeycomb, a variety of sizes, number of holes can meet the specifications required.
Honeycomb coal briquette making machine for coal powder have been mainly used in home fire, heating with anthracite honeycomb made of cylindrical briquettes. Previously been processed into the coal sphere slightly larger than ping-pong, and later the coal processed into one cylinder, and marked with a number of holes inside the cylinder, because it can increase the surface area of coal, so that the full combustion of coal, to reduce resource waste.
Technical Data:
Model
Standard of coal (mm)
Power
(kw)
Capacity
(pcs/ h.)
Weight
(ton)
Size
(mm)
FM-120
φ98×80 φ100×80 φ102×80
φ125×80 φ126×80
95×95×80
5.5
2700
1.5
1430×1050×1620
FM-140
φ120×80 φ125×80 φ140×80
100×100×85
7.5
2700
2.0
1600×1790×1770
FM-160
φ140×80 φ150×80 φ162×80
120×120×90
7.5
2700
2.5
1460×2200×2000
2011 propular product straw pellet molding machine with stalk crusher
1. Power of pellet molding machine : 22kw
2. Output: 1t/h
3. Overall dimension: 2000*900*1500(mm)
4. Equipment weight: 1.3t
1. Brief Intro of pellet molding machine
:
pellet molding machine is a full set of mechanized production equipment. pellet molding machine can convert biomass raw material and solid waste into high density and energy fuel. straw
pellet molding machine is widely used in
household stove
,
heating furnace
,
hot water boilers
,
industrial boilers, etc.
The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
Equipment Parameters:
1). Power: 22kw
2). Output: 1t/h
3). Overall dimension: 2000*900*1500(mm)
4). Equipment weight: 1.3t
5). Quality warranty: 1 year
2. Product Description of pellet molding machine
:
Straw coal is a kind of new-style energy with renewable, environmental protection, biomass clean and low cost. It is widely used of heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coal boiler environmental protection, and solved the problem of higher industry fuel costs.
Straw coal parameters:
1). Length of raw materials: 2-90mm
2). Moisture content of raw materials: 5-30%
3). Product shape: diameter 6~60mm
4). Product density : 0.9-1.4 g/cm3
5). Calorie :3500-5500 kcal
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furnaces.
straw pellet molding machine is suitable for various kinds of materials whose moisture content is less than 30%.The machine is fully automatic electric heating, can
adjust the humidity of materials
to address problems of congestion and not forming. The machine has advantage of
simple structure, easy operation, high automation, and less labor
.
3. Our advantages of pellet molding machine
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc.
2. Output: 1t/h
3. Overall dimension: 2000*900*1500(mm)
4. Equipment weight: 1.3t
1. Brief Intro of pellet molding machine
:
pellet molding machine is a full set of mechanized production equipment. pellet molding machine can convert biomass raw material and solid waste into high density and energy fuel. straw
pellet molding machine is widely used in
household stove
,
heating furnace
,
hot water boilers
,
industrial boilers, etc.
The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
Equipment Parameters:
1). Power: 22kw
2). Output: 1t/h
3). Overall dimension: 2000*900*1500(mm)
4). Equipment weight: 1.3t
5). Quality warranty: 1 year
2. Product Description of pellet molding machine
:
Straw coal is a kind of new-style energy with renewable, environmental protection, biomass clean and low cost. It is widely used of heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coal boiler environmental protection, and solved the problem of higher industry fuel costs.
Straw coal parameters:
1). Length of raw materials: 2-90mm
2). Moisture content of raw materials: 5-30%
3). Product shape: diameter 6~60mm
4). Product density : 0.9-1.4 g/cm3
5). Calorie :3500-5500 kcal
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furnaces.
straw pellet molding machine is suitable for various kinds of materials whose moisture content is less than 30%.The machine is fully automatic electric heating, can
adjust the humidity of materials
to address problems of congestion and not forming. The machine has advantage of
simple structure, easy operation, high automation, and less labor
.
3. Our advantages of pellet molding machine
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc.
Subscribe to:
Posts (Atom)