municipal sewage water treatment equipment

municipal sewage water treatment B2K series
municipal sewage water treatment

1.The output capacity of this system is designed for the raw water of 25°C. If the temperature of the raw water is higher or lower than 25°C when actual operation, the capacity is subject to change accordingly. In addition, the change of the quality of the raw water will also influence the output quality and capacity, which will be explained separately later.
2.The system is composed of three parts:RO filtration,fresh water replacement and electrical control.
3.The feed water was firstly filled into sediment filter, then feed into the RO system after pressurized by high pressure pump. The permeate water was feed into the permeat tank and the concentrate water was discharged or recovered. When stop operation, the equipment should be cleaned by fresh water replacement system.
4.This RO should work under the stipulated conditions. Please check whether the raw water quality meets the feed water requirement or not. If the feed water doesn’t conform to these requirements, it will result in the permanent irrecoverable pollution and damage of membrane. Pollution and damage caused by this situation will not be guaranteed.

nameplate logo sticker

nameplate/metal logo plate/trademark
1. Customized
2. Shiny and embossed letters
3. Sand blasting background
nameplate/metal logo plate/trademark
1. Material : Aluminum plate 0.4mm embossed
2. Shiny letters with diamond cutting
3. Background : Sandblasting + anodizing
4. Red color : Injection painting
5. With adhesive tape

neodymium Magnet

NdFeB magnet is widely used in wind generator
Product briefs:

Grade available
: all grades from N30 to 30EH,specialized in high grade
Coating:
Zn,Ni,Epoxy,Cr,ZnC,gold,etc.
Certificate:
ISO/TS16949,ISO14001,ISO9002
Performance test:
salt spray test ,metallographic analysis microscope ,PCT test Micron tester,etc.
Performance:
high flux, high coercive force, low temperature coefficient and low loss of irreversible.

FREE SAMPLES can be sent on request. Looking forward to your enquiry!

new design Bio-fuel forming machine

1 Raw material from agricultural
2. long-burning time hard wood charcoal/ long life
3. reliable mechanical structure
biomass briquette machine:

profile of our factory:
Our factory has developed to be a professional enterprise specializing in the R&D, design, manufacture. Our products are honeycomb briquette machine series, ball press series, crusher series, mixer series, etc. welcome to our plant for more information.
The machine uses advanced technology like slot wheel mechanism indexing, lock-arc location, fully enclosed gear room, etc. The machine has characteristics of convenient installation, high efficiency, energy saving, low noise, durable, easy to maintain. It’s ideal equipment for entrepreneurs.

characteristics:

1. Briquette making machine can be used for pressing different molds of briquettes by replacing matching moulds. The customers can purchase complete machine with other kind of moulds, then the machine can be multi-purpose, and the customers can save capitals.
2. Besides the normal products, we can also design and manufacture special moulds as the customers’ requirements.
3. The briquette making machine can produce honeycomb briquettes, also it can press powder materials into other shapes.

The briquette machine series we manufactured are best seller, Briquette machine can produce briquette of various shapes like square, rounded, porous, plum flower form etc, and our machines are multi-purpose: a machine can produce briquettes in different types, also our machine can produce new-type ignited briquette. The mechanical capacities are far superior to others, and the products they manufactured are smooth and combustible. The new type machine is welcome by customers with characteristics of low power consumption, full automation.
raw materials:
Biomass briquettes are widely used in boilers, refractory, chemicals, home heating, etc. They become more and more popular as fuel all over the world.
Lantian charcoal/biomass briquette press can process any kinds of agro-forestry wastes into renewable bio-fuel. Biomass briquette press can make 30-80mm solid, hexagonal or square or round cyclinder soild fuel briquettes.
The briquette materials can be wood chips, sawdust. Sugar cane bagasse, branches, rice husk, rice straw, cotton stalk, cotton stalk, cottonseed skins, wood, wood shavings, wood chips, mustard stalk, wheat straw, soybeens husk, coffee husk, sunflower husk, peanut-shell, sugar cane bagasse, maize stalk, palm fruit bunch, paddy straw, tobacco waste, bamboo dust and any other crop wastes.
sugarcane bagasse, caster shells / stalk, saw dust, coffee husk, paddy straw, sunflower stalk, cotton stalks, tobacco waste mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, coir pitch barks / straws, forestry wastes and many other agro wastes.

main technial parameters of our machines:
LTQ140 Technical parameters of briquette machine
Power (kw)
Yield(pcs\min)
Coal ball type
7.5
50
Round below 140
Square below 100*100

LFQ140 technical parameters of briquette machine
Power (kw)
Yield(pcs\min)
Coal ball type
7.5
45
Round below 140
Square below 100*100
LTQ 160 Technical parameters of briquette machine
Power(kw)
Yield (pcs\min)
Coal ball type
7.5
50
Round below 160
Square below 120*120
LTQ180 techniacal parameters of briquette machine
Power(kw)
Yield(pcs\min)
Coal ball type
7.5
42
Round below 180
Square below 150*150

LTQ220B technical parameter of briquette machine
Power(kw)
Yield (pcs\min)
Coal ball type
11
22-26
Round below 220
Square below 200*200

LFM220A technical parameters of briquette machine
Power(kw)
Yield(pcs\min)
Coal ball type
11
20-24
Round below 240
Square below 200*200



wel come your enquiry.
mobile phone:18703892319

:

new energy resources Biocoal Forming Machine for Biomass Briquettes(Newly Design)

Biocoal Forming Machine:
1.High production
2.Long durablity
3.Easy to operate
4.Stable performance
Sawdust Briquette Machine
make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.
Appropriate Biomass Residues for Briquetting:

1. Effect of particle size and shape of the agro residues for densification. The ideal size was identified to be 3-5mm.
2. Effect of moisture. Ideal level was 8 to 12 per cent.
3. Effect of feed preheating studied and the temperature upto 90 to 110 degree centigrade for the feed was optimised.
4. Effect of temperature on the die was found important and the temperature at 280 to 290 0C was observed to be most appropriate
5. Effect of mixing rice husk with bagasse and bagasse pith to achieve the briquetting of these materials

Working Principle of Sawdust Briquette Machine:

Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.
The process for producing charcoal briquette as follow:

1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick
Characteristic of Biomass Briquette Machine:

1. No binder or noxious chemical need to use.
2. The humidity of the raw materials is controlled in 8-12%.
3. Using the advanced Hot air drying system with the perfect performance.
4. After the processing of High temperature, purification, smoke removing, the carbonizing equipment transforms the semi-finished bio-fuel briquette into a smoke-free, tasteless, non-toxic cleaning carbon.

Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood

Biomass briquette machine:

new energy saving led T8 tube light

new energy saving led T8 tube light
1.Environment friendly
2.CE & TUV certification
3.5 years warranty
4.ALuminum body
new energy saving led T8 tube light
Type
T8-LED
Light source
120/240/360/480x SMD LED
Light color
5700K(cool white)/4500k(natural white)/3000K(warm white)
CRI
>70
Beam Angle
120°
Lifetime
40,000hrs (70% lumen maintenance)
Imput Voltage
AC 100-240V 50/60HZ
Power consumption
9W/18W/27W/36W
Luminous flux
500lm/1000lm/2000lm
Installation
Replacing fluorescent lamp directly
Materals
Aluminum extrusion / surface anodizing
Superior anti-glare PC cover
Classification
IEC 60598-1/GB7000.1 2007,CE
IP 20 ,Class IIII
Opteration temperature: -20°C<Ta< 55°C
Control
ON/OFF
Accessories
Grill

LED Tube Applications:
1) Commercial and exhibition locations
2) Hotel, conference room
3) Factory, office, house
4) Airport, metro station

new energy

leading solar module manufacturer approved with ISO,CE,ICE,TUV, power range from 20watt to 280watt
puntual delivery
monocrystalline or polycrystalline
working life 20-25years
restrict quality in manufacture process
welcome to visit factory for business cooperation
source agent
power project

new product high quality led street lamp manufacture with CE

new product high quality led street lamp manufacture with CE
1> aluminum reflector
2> toughened glass shade
new product high quality led street lamp manufacture with CE
Input Voltage
85-285VAC; 12 or 24VAC/DC
Frequency Range
47 ~ 63 Hz
Power Factor(PF)
>0.92
Total Harmonic Distortion(THD)
>20%
Power Efficiency
85%
Working Voltage
85-264VAC, 12 or 24VAC/DC
LED Luminous Efficiency
≥95 lm/w
LED Initial Flux?
2,750 lm ( Tj=25°C )
LED Maintain Flux
2,500 lm ( Tj=70°C,Ta=25°C)
Lamp Output Flux
2,350 lm ( Tj=70°C,Ta=25°C)
Lamp's Efficiency ( %)
>90 %
Illumination ( E )
(Height=6 m )≥20.5 lux(Equal to HPS 40 lux)

(Height=8 m ) ≥11.5 lux(Equal to HPS 25 lux)

(Height=10 m )≥8 lux(Equal to HPS 18 lux)

(Height=12 m )≥6.5 lux(Equal to HPS 12 lux)
Effective Illuminated Area
20×8 m (Height=6 m )

26×10 m (Height=8 m )
Color Temperature
Pure White, White White, Cool White
Color Index(CRI)
Ra>85
Light Source
High Power 1 Watt LED, CREE, OSRAM, SEMILED,EDISON
Light Distribution Curve / Beam Pattern
Asymmetric (Bat Wing) / Rectangular Beam
The Highest Light Intensity Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Beam Angle
120°:The Horizontal Axis:110°, The Vertical Axis:45°; 140°:The Horizontal Axis:130, The Vertical Axis:45°
Junction Temperature ( Tj )
70 ° C ± 1 0% ( Ta= 25 ° C )
System Resistance ( Rja )
1.4 ° C / W
Working Temperature
- 30 ° C ~ 40 ° C
Working Humidity
10 % ~ 90 % RH
Storage Temperature
10 ° C ~ 85 ° C
Working Life
> 50,000 Hrs

1 Integrated single unit high power LED light source
2 Imported high brightness semiconductor chips
3 Aluminum Die-casting forming frame
4 Protection class IP65
5 Double light increase lamps and lanterns effective out light Angle
6 High illumination, bright color, free-glare and strobe
7 Able to work under low voltage conditions, safe and reliable
8 Environment-friendly ,excluding the ultraviolet ray and other harmful rays
9 Quit startup
10 With 50000 hrs life time
11 Able to be connected with solar energy system, high controllability
12 Flexible installation

newest charcoal briquette machine

newest charcoal briquette machine
1.CE Certification
2.Hot sale in Europe
3.Easy operation
newest charcoal briquette machine
introduction:

Charcoal briquette machine shows the features of high capacity, low energy consumption, compact and durable. Many performance data such as capacity, wood briquettes density, electricity consumption and wearable degree has reached advanced level. Charcoal briquette machine can be used as charcoal powder briquette machine by replacement of some spare parts. The out diameter of finished briquettes is 40-80mm.

raw matetrial :
The final bio-fuel briquette is made by the advanced biomass briquetting machine. Almost all type of Agro-Forestry waste can be used, including: wood chips, maize stalks, soybean stalks, broomcorn stalks, cotton stalks, rape stalks, peanut plants, sunflower stalks, bamboo saw dust, bagasse, etc.



If you like this machine, pls contact me.
My TEL: 0086-371-69575678
FAX: 0086-371-69532676

4.2KW dc motor

4.2KW dc motor
Model:WSG-EM5015
Voltage:72V
Output/Power: 5KW
4.2KW dc motor
Model:WSG-EM5015

Voltage: 72V

Output/Power: 5KW

Rotational speed: 1800r/min

Products structure: output shaft is 6 Teeth internal spline 6×Φ23×Φ28

Custom products can accepted per your specifications

no pollution Carbonization oven 008613949002032

carbonization oven
1.Easy operate and maintain,
2.higher safety, energy saving
3.High carbonization rate, no smoking
carbonization oven
Carbonization Furnace
is an stove used to change biomass briquette into charcoal briquette. We can provide the technology for establishing a charcoal kiln. The quality and efficiency of kiln affect final forming of charcoal briquette greatly. We have different types of the carbonization furnace
technician to help the client building the carbonization kiln
1.introduction of gas flow type carbonization furnace

A. Raw materials:
wood logs, coconut shell, Macadamia shell and so on
B: The whole machine include :
main furnace ,carbon basket, and fume extraction tude
1. Main furnace:
it includes heating room, furnace body and heat-keeping layer
2. Carbon basket:
The raw materials the resistance thermal steel plant and sealing cover.
3. Fume extraction tube:
When during the process of carbonizing, there will be some smoke (can
be burning) the smoke can return to the furnace through tube----air-blast carbonization



C: operation:
When one carbon basket have been finished carbonization, use the hoisting tools hoist the carbon basket from the main furnace, then let the carbon basket natural cooling, at the same time, put another carbon basket into the main furnace, which will save a lot of cooling time, so the productivity effect increase a lot.
d
: Technology Data:
Carbonizing speed
3-4 ton charcoal /24hours
Operation
One people can control 2-3set, but need the crane for help
Power
No power
Temperature
480’C
Environment
Totally No pollution ( there are two reasons : the frog and the gas flow will be recycle from the smoke recycle device and use for heating the kiln again
2. we install a special device that can use the liquid gas as the energy to heating the carbonization kiln, and it will not produce any smoke.
Time
This type have three inner stove, when one inner stove finished (6- 8hours ) , use the hoist tools lift the inner stove out let it cooled naturally, at the same time, lift the other one in , 3 inner stove can work continuously. 24 hours can carbonizing 3-4 inner stove
Transport
The three inner stove can be stack in the outer stove together, save a lot of space,
energy consumption
20-30kg firewood or 15kg liquid gas .This type will save 30% payment

no pollution carbonization kiln

carbonization kiln
1.Easy operate and maintain,
2.higher safety, energy saving
3.High carbonization rate, no smoking
gas flow type carbonization kiln
Carbonization Furnace
is an stove used to change biomass briquette into charcoal briquette. We can provide the technology for establishing a charcoal kiln. The quality and efficiency of kiln affect final forming of charcoal briquette greatly. We have different types of the carbonization furnace
technician to help the client building the carbonization kiln
1.introduction of gas flow type carbonization furnace

A. Raw materials:
wood logs, coconut shell, Macadamia shell and so on
B: The whole machine include :
main furnace ,carbon basket, and fume extraction tude
1. Main furnace:
it includes heating room, furnace body and heat-keeping layer
2. Carbon basket:
The raw materials the resistance thermal steel plant and sealing cover.
3. Fume extraction tube:
When during the process of carbonizing, there will be some smoke (can
be burning) the smoke can return to the furnace through tube----air-blast carbonization



C: operation:
When one carbon basket have been finished carbonization, use the hoisting tools hoist the carbon basket from the main furnace, then let the carbon basket natural cooling, at the same time, put another carbon basket into the main furnace, which will save a lot of cooling time, so the productivity effect increase a lot.
D: The feature of the equipment

1. Easy operate and maintain, higher safety, energy saving
2. High carbonization rate ,no smoking, little pollution, high efficiency
3. newly developed carbonization stove, which can dry the materials with the superfluous energy
produced in the process of carbonization. 6-8 hours per stove and can work continousy 4. the tube of fume extraction will recycle the gas flow which come from the carbon basket during the carbonizing process for continue warming the stove, and it will save 70% energy consumption and recycle 95% smoking

F: Technology Data:
Carbonizing speed
3-4 ton charcoal /24hours
Operation
One people can control 2-3set, but need the crane for help
Power
No power
Temperature
480’C
Environment
Totally No pollution ( there are two reasons : the frog and the gas flow will be recycle from the smoke recycle device and use for heating the kiln again
2. we install a special device that can use the liquid gas as the energy to heating the carbonization kiln, and it will not produce any smoke.
Time
This type have three inner stove, when one inner stove finished (6- 8hours ) , use the hoist tools lift the inner stove out let it cooled naturally, at the same time, lift the other one in , 3 inner stove can work continuously. 24 hours can carbonizing 3-4 inner stove
Transport
The three inner stove can be stack in the outer stove together, save a lot of space,
energy consumption
20-30kg firewood or 15kg liquid gas .This type will save 30% payment

no pollutioncarbonization oven

carbonization oven
1.Easy operate and maintain,
2.higher safety, energy saving
3.High carbonization rate, no smoking
gas flow type carbonization oven
carbonization oven
is an stove used to change biomass briquette into charcoal briquette. We can provide the technology for establishing a charcoal kiln. The quality and efficiency of kiln affect final forming of charcoal briquette greatly. We have different types of the carbonization furnace
technician to help the client building the carbonization kiln
1.introduction of gas flow type carbonization furnace

A. Raw materials:
wood logs, coconut shell, Macadamia shell and so on
B: The whole machine include :
main furnace ,carbon basket, and fume extraction tude
1. Main furnace:
it includes heating room, furnace body and heat-keeping layer
2. Carbon basket:
The raw materials the resistance thermal steel plant and sealing cover.
3. Fume extraction tube:
When during the process of carbonizing, there will be some smoke (can
be burning) the smoke can return to the furnace through tube----air-blast carbonization



C: operation:
When one carbon basket have been finished carbonization, use the hoisting tools hoist the carbon basket from the main furnace, then let the carbon basket natural cooling, at the same time, put another carbon basket into the main furnace, which will save a lot of cooling time, so the productivity effect increase a lot.
D: The feature of the equipment

1. Easy operate and maintain, higher safety, energy saving
2. High carbonization rate ,no smoking, little pollution, high efficiency
3. newly developed carbonization stove, which can dry the materials with the superfluous energy
produced in the process of carbonization. 6-8 hours per stove and can work continousy 4. the tube of fume extraction will recycle the gas flow which come from the carbon basket during the carbonizing process for continue warming the stove, and it will save 70% energy consumption and recycle 95% smoking

F: Technology Data:
Carbonizing speed
3-4 ton charcoal /24hours
Operation
One people can control 2-3set, but need the crane for help
Power
No power
Temperature
480’C
Environment
Totally No pollution ( there are two reasons : the frog and the gas flow will be recycle from the smoke recycle device and use for heating the kiln again
2. we install a special device that can use the liquid gas as the energy to heating the carbonization kiln, and it will not produce any smoke.
Time
This type have three inner stove, when one inner stove finished (6- 8hours ) , use the hoist tools lift the inner stove out let it cooled naturally, at the same time, lift the other one in , 3 inner stove can work continuously. 24 hours can carbonizing 3-4 inner stove
Transport
The three inner stove can be stack in the outer stove together, save a lot of space,
energy consumption
20-30kg firewood or 15kg liquid gas .This type will save 30% payment

non-ferrous metal briquette press machine

briquette press machine:
1.strong hydraulic pressure
2.fine wear resistance
3.recycle waste
non-ferrous metal briquette press machine:
The briquette machine can supply higher pressure and higher density during production of briquettes.
Features:
1.strong hydraulic pressure
2.fine wear resistance
3.recycle waste 4.Low consumption 5.easy maintain and operateIt's mainly used in the briquettes making of various color and black metallic mine powder. It is applicable to make briquettes from coal powder, metal powder and coke powder with binder.
Partial list of materials presently being briquetted:
Coal
Coke
Anthracite
Ash
Iron Oxide
Iron concentrate
Metal powder
Iron powder
Dried Sewage Sludge
Steelwork dust
Manganese

non-ferrous metal briquette press machine

briquette press:
1.strong hydraulic pressure
2.fine wear resistance
3.recycle waste
non-ferrous metal briquette press machine:
The briquette press machine can supply higher pressure and higher density during production of briquettes.
Features:
1.strong hydraulic pressure
2.fine wear resistance
3.recycle waste 4.Low consumption 5.easy maintain and operateIt's mainly used in the briquettes making of various color and black metallic mine powder. It is applicable to make briquettes from coal powder, metal powder and coke powder with binder.
Partial list of materials presently being briquetted:
Coal
Coke
Anthracite
Ash
Iron Oxide
Iron concentrate
Metal powder
Iron powder
Dried Sewage Sludge
Steelwork dust
Manganese

non-polluting low price briquette machine

1 high output, low consumption non-polluting low price briquette machine
2. Small size, light weight, non-polluting

non-polluting low price briquette machine


Applications:aquatic products, poultry, livestock classes, pet class, ornamental fish
Feed type: amino acids, soybean meal, grain, straw, green fodder, meat and bone meal, whey powder, oil, fish meal, mixed meal, and other
Characteristics
1. high output, low consumption, If electricity facilities are unavailable, diesel engine replace it .
2. Small size, light weight, non-polluting, low price.
3. Strong adaptability to raw materials: suitable for forming a variety of biomass raw materials, straw from powder to 55mm length, the moisture content of 5-30%, and can be processed.
4.Simple and easy to use: high degree of automation, less labor, only 3 people, the use of artificial feeding and automatic feeding conveyor are both ok.
5. Process: crush → transport → storage → finished molding

technicalparameters
Model
JMX-C
Weight
780kg
Capacity
0.3-2.13t/h
Power
22KW
Style
Briquetting machine

normal 6&quot; pipe

normal 6" pipe
1.market:Middle East,India,Korea,Japan,Europe,America,South America,
2.Specification:1/2"-32"
normal 6" pipe
We offer seamless steel pipe /carbon steel pipes /alloy steel pipes/ galvanized steel pipes /ERW steel pipes /Square steel pipes
Features
1.Premium Quality
2.High Performance
3.High durable
4.Longer working life
5.Cost effetive price
Application Area:
Widely used in construction ,Oil plant,natural gas ,fluid pipe ,chemical plant ,etc
Delivery
:AS per client's schedule
Customization
:Deliver customized products
Packaging
:Durable and safe packaging

standard
Steel grade
Chemical Composition%

TS
MPa
YS
MPa
Elongation%


C
Mn
P
S
MIN
API5L
B
0.27
1.15
0.03
0.03
413
241
25.1-29.5
X42
0.29
1.25
0.03
0.03
413
289
21.5-29.5
X46
0.31
1.35
0.03
0.03
434
317
20.5-28.5
X52
0.31
1.35
0.03
0.03
455
358
19.5-27
X56
0.26
1.35
0.03
0.03
489
386
18.5-25.5
X60
0.26
1.35
0.03
0.03
517
413
17.5-24
Application
1.Oil drilling
2.Chemical plant construction
3.Gas pipeline

notebook dc adapter for Fujitsu FMV-AC304B notebook

ac dc power adapter for Fujitsu
green power safe, compatible
CE/FCC/RoHS certificated
12 months warranty
fast delivery


OEM 19 V 3.36 A notebook ac adapter
for Fujitsu notebook



1. Specifics:
Output :
19.V 3.36 A
Power :
65 W
Tip :
6.0*4.4mm
Input:
100 V— 240 V
Input Frequency:
47-63 Hz
Efficiency :
> 87 %
Ripple Noise:
< 400mVp-p
Warranty:
12 months
M.T.B.F:
50000 Hours
Certification:
CE / FCC / RoHS



Input
100—240V
OverCurrent protection
Yes
Efficiency
> 87 %
Output

19 V
3.36 A
OverHeat Protection
Yes
Ripple Noise
< 400mVp-p
Warranty
12 months
OverVoltage protection
Yes
DC tip
4.4 * 6.5 mm
M.T.B.F
50000 Hours
ShourCircuit Protection
Yes
Size
125*35*30mm

Compatible Part numbers:
CA01007-0760 FMV-AC304B
Compatible with following Series:
Fujitsu Lifebook C Series
C-4120, C-4235, C-5130, C-5235, C-6177, C-6320, C-6330, C-6525, C-6535, C-6537, C-6547,
Fujitsu Lifebook E Series
E-5140, E-5320, E-5520, E-6520, E-6530, E-6540, E-6541, E-6550, E-6555, E-6556, E-6557,
Fujitsu Lifebook I Series: I-4187, I-4190
Fujitsu Lifebook P Series
PenCentra 130, PenCentra 200, Point 1600, Point 510
Fujitsu Lifebook S Series: S-5582
Fujitsu Stylistic Series
Stylistic 1000, Stylistic 1200, Stylistic 2300, Stylistic 3400, Stylistic 3500, Stylistic 500, Stylistic LT, Stylistic LT C-500, Stylistic LT P-600







Aging Test Centre

off grid vertical axis wind turbine system

vertical axis wind turbine :
1.low start-up wind speed
2.reliable quality
3.energy-saving
4.long service life
vertical axis wind turbine :

CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.

Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.

Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
12
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×1
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
Rated Power(W)
500
1000
2000
3000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
Setup Speed (m/s)
2
2.5
2.5
2.5
Rated Speed(m/s)
8
8
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
OUT DC off grid (V)
24
48
48
48
Battery off grid
12V150AH×2
12V150AH×4
12V200AH×4
12V300AH×4
Height of Tower (m)
6
6
6
10
Upper Weight (kg)
67
95
188
217
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.

The pictures of our VAWT:

off grid vertical wind generator CE

wind power generator:
1.Low start-up wind speed
2.Better quality, low noise
3.Safe,quiet,efficient
4.Own patent and CE
wind power generator:

CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.

Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.

Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.

The picture of VAWT:

Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
Please feel free to contact us anytime

4.2KW dc motor

4.2KW dc motor
Model:WSG-EM2038
Voltage:72V
Output/Power: 3KW
4.2KW dc motor
Model:WSG-EM2038

Voltage: 72V

Output/Power: 4.2KW

Rotational speed: 1800r/min

Products structure: output shaft is 6 Teeth internal spline 6×Φ23×Φ28

Custom products can accepted per your specifications

off grid vertical wind generator VAWT

vertical wind generator :
1.Low start-up wind speed
2.Better quality, low noise
3.Safe,quiet,efficient
4.Own patent and CE
vertical wind generator :

Product Name:off Grid Wind Turbine Generation 50W-5KW
Model No.:CTV-50W~5KW OFF GRID

CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.

Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.

Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.

The picture of our VAWT:






Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.If you are interested in our VAWT, Please inform me anytime

off grid vertical wind turbine for home use

vertical wind turbine :
1.home use
2.off-grid and on-grid
3.guyed tower
4.pure sine wave inverter
vertical wind turbine :

Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.

Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
Rated Power(W)
500
1000
2000
3000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
Setup Speed (m/s)
2
2.5
2.5
2.5
Rated Speed(m/s)
8
8
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
OUT DC off grid (V)
24
48
96
220
Battery off grid
12V150AH×2
12V150AH×4
12V200AH×8
12V150AH×18
Height of Tower (m)
6
6
8
10
Upper Weight (kg)
67
95
188
217
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.

The pictures of our vertical wind turbine:

off grid vertical wind turbine generation

vertical wind turbine:
1.ISO,CE certification
2.High generation efficiency
3.Simple installation
4.Low start-up wind speed
vertical wind turbine:

CTTURBINE has developed several types of vertical axis wind turbine off grid;
and highly competitive on design, quality, price, with its safety, silence, and small size.

Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave with automatic on-grid interface or directly on grid invertor.

Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous
high voltage when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.

Picture of vertical wind turbine:

Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
Please feel free to contact us anytime

off grid vertical wind turbine system

vertical wind turbine:
1.low start-up wind speed
2.high ability of anti-wind
3.CE,ISO certified
4.no noise,maintenance-free
vertical wind turbine:

CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.

Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.

Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
Rated Power(W)
500
1000
2000
3000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
Setup Speed (m/s)
2
2.5
2.5
2.5
Rated Speed(m/s)
8
8
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
OUT DC off grid (V)
24
48
96
220
Battery off grid
12V150AH×2
12V150AH×4
12V200AH×8
12V150AH×18
Height of Tower (m)
6
6
8
10
Upper Weight (kg)
67
95
188
217
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.

The installation pictures of our vawt:

off grid wind power turbine

vertical wind turbine:
1.Low start-up wind speed
2.Better quality, low noise
3.Safe,quiet,efficient
4.Own patent and CE
vertical wind turbine:

CTTURBINE has developed several types of vertical axis wind turbine off grid; and highly competitive on design,
quality, price, with its safety, silence, and small size.

Description
VH model has small size, and simple design. It fully uses lift force, easily products rated power at low wind speed.
3 Phase Permanent Magnet AC Generator, direct driven, no gearbox, and not need windward.
It has perfect performance. With low rpm of generator; controller can be PWM, on grid; invertor can be pure sina wave
with automatic on-grid interface or directly on grid invertor.

Main Specifications
Item/Model
CTV-50W
CTV-100W
CTV-200W
CTV-300W
Rated Power(W)
50
100
200
300
Rotor Diameter (m)
1
1
1.2
1.2
Setup Speed (m/s)
2
2
2
2
Rated Speed(m/s)
7
7
7
8
Working Speed (m/s)
2.5-25
2.5-25
2.5-25
2.5-25
OUT DC off grid (V)
12
12
24
24
Battery off grid
12V100AH×1
12V100AH×1
12V100AH×2
12V100AH×2
Height of Tower (m)
6
6
6
6
Upper Weight (kg)
30
36
40
58
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Item/Model
CTV-500W
CTV-1KW
CTV-2KW
CTV-3KW
CTV-5KW
Rated Power(W)
500
1000
2000
3000
5000
Rotor Diameter (m)
1.4
1.75
2.6
3.5
4
Setup Speed (m/s)
2
2.5
2.5
2.5
3
Rated Speed(m/s)
8
8
10
10
10
Working Speed (m/s)
2.5-25
3-25
3-25
3-25
3.5-25
OUT DC off grid (V)
24
48
96
220
380
Battery off grid
12V150AH×2
12V150AH×4
12V150AH×8
12V150AH×18
12V150AH×30
Height of Tower (m)
6
6
6
8
9
Upper Weight (kg)
67
95
188
217
605
Generator Type
3 phase permanent magnet, direct driven
Charge Controller
with Automatic Electrical Brake
Inverter
110/220/230V, 50/60Hz pure sine wave

Main advantages of this product
1) small size
2) silent as vertical wind turbine
3) simple installation
4) The invertor is power efficiency,and sina wave. It has good performance when facing instantaneous high voltage
when we start pump, fridge, etc
5) we have PWM controller, which can make output voltage steady.

The picture of our VAWT:





Notes:
1.For the power curves and details,please feel free to contact me.
2.Our CE EMC certification number:1826
3.Please feel free to contact us anytime

off-grid inverter

1.off-grid inverter
2.low vlotage charge
3.CE certificate.
4.2 years warranty
5.remote monitoring,LCD
off-grid inverter,solar inverter,power inverter,wind turbine inverter,sine wave inverter,pure sine inverter,LCD inverter,off-grid inverter,digital inverter,DC inverter.
Model SPI100-220 SPI100-240 SPI100-360
Inverter Rated Output Capacity 10kVA
Rate Battery Voltage 216VDC 240VDC 360VDC
Inverter Output Over-voltage Protection 306VDC 340VDC 510VDC
Inverter Output Over-voltage Recovery 297VDC 330VDC 495VDC
Battery Under Voltage Protection 189VDC 210VDC 315VDC
Battery Under Voltage Recovery 216VDC 240VDC 360VDC
No-load Current 0.5A 0.4A 0.4A
Output Wave Pure Sine Wave
Display Mode LCD
Display Parameters Battery Voltage,Charge Current,State Parameter
Heat Mode Fan
Rated Output Voltage 110/120/220/230/240 VAC
Total Harmonic Distortion ≤4%
Output Frequency 50/60 Hz±0.05Hz
Dynamic Response 5%
Overload ability 120% 1 minute,150% 10 second
Inverter Efficiency Maxmum 90%
Noise Level(1m) ≤40dB
Isolate Level 1500VAC,1 minute
Protection Function high battery, low battery, over load , short circuit,
over temperature, pole-confusion protection for storage battery
Operation Ambient Temperature -20~50°C
Operation Altitude ≤4000m
Operation Ambient Humidity 0~90%, no condensing
Size(W×H×D)mm 600×890×600
Weight(KG) 93
In order to give our customers better serve, we can adjusted configuration and parameters according to the customer’s request
Optional Function
Mains Switch If users chose the mains switch function,when the battery under voltage or inverter part malfunction .The controller will switching to the mains automatically.So as to ensure the load working continuity and consistency.

off-grid wind generator 2000w

wind generator 2000w
1.CE registered
2.Service life: 15-20 years
3 .MOQ: one set
4.Delivery time: 3 working day
wind generator 2000w
1. Technical parameter
Model
FZY2K
Rotor diameter
3.2m
blade quantity
3pcs
rated power
2000w
max output power
3000w
out voltage
DC72V/AC220V
Start wind speed
3m/s
rated wind speed
8m/s
Recommended accumulators
12V200AH6PCS
CAN SUPPLY POWER FOR
water pump.TV. washer. Illumine. Fanner. Charge





Blades
Material
FRP (composite material)
Rotor diameter
3.2m
Start wind speed
3m/s
Working wind speed
3-25m/s
Security wind speed
40m/s
Working temperature
from -40°C to +60 °C
Weight
18kg




2. Power curve


3. Parts picture


4. Product advantage
a.
The specific outer rotor magnetic circuit is designed in a new way and are made of high-stability Nd-Fe-B materials
b.
They are in high generating efficiency, have higher electric performance and use performance than the kindred products.
c.
They are in light weight, low starting torque and easy to install.
d.
They also have appealing appearance.


Qingdao Windwings
Wind Turbine
Co., Ltd., located in a nice coastal city called Jiaonan is a hi-tech company specialized in research & development, production, sales and service of medium and small wind turbines and devoted to the development and utilization of natural environmental protection energy such as wind energy, solar energy, etc.





1
Generator
Type
PMG (on constant magnets)
Speed regulation
Yaw& magnetic resistance
Rated output power
2kw
Max output power
2.5kw
Output voltage
DC72V/AC220
Rated speed
320r/min
Rated wind speed
9m/s
Weight
80kg

off-grid wind generator 2000w

wind generator
1.CE registered
2.Service life: 15-20 years
3 .MOQ: one set wind generator
4.Delivery time: 3 working days
wind generator
1. Technical parameter
Model
FZY2K
Rotor diameter
3.2m
blade quantity
3pcs
rated power
2000w
max output power
3000w
out voltage
DC72V/AC220V
Start wind speed
3m/s
rated wind speed
8m/s
Recommended accumulators
12V200AH6PCS
CAN SUPPLY POWER FOR
water pump.TV. washer. Illumine. Fanner. Charge
Power: 2KW wind power generator
Rotor diameter: 3.2m
Blades quantity: 3 pcs
Blades material: FRP (composite material)
Rated speed: 320r/min
Rated output power: 2000W
Max output power: 3000W
Output voltage: DC72V/AC220V
Start wind speed:3m/s
Rated wind speed:8m/s
Working wind speed: 3-25m/s
Security wind speed: 40m/s
Speed regulation: yaw& magnetic resistance
Charge control: AIC (automatic intelligent control)
Windturbinetype: PMG (onconstantmagnets)
Working temperature: from -40 to +60 C
Annual average energy production: 5000kWh
Recommended accumulators: 1200Ah
Accumulators full charge time: about 8 hours
Tower type: pull wire tubular tower or cone tower(optinal)
Tower height:6m (optional)
Weight: 80kgs (without tower)
CAN SUPPLY POWER FOR: water pump.TV. washer. Illumine. Fanner. Charge

2. Power curve


3. Parts picture


4. Product advantage
a.
The specific outer rotor magnetic circuit is designed in a new way and are made of high-stability Nd-Fe-B materials
b.
They are in high generating efficiency, have higher electric performance and use performance than the kindred products.
c.
They are in light weight, low starting torque and easy to install.
d.
They also have appealing appearance.


Qingdao Windwings
Wind Turbine
Co., Ltd., located in a nice coastal city called Jiaonan is a hi-tech company specialized in research & development, production, sales and service of medium and small wind turbines and devoted to the development and utilization of natural environmental protection energy such as wind energy, solar energy, etc.
The main products of our company include off-grid and grid-connected wind turbines, wind turbine blades and wind solar lighting system. They are widely used in agricultural and pastoral areas, mountainous areas, islands, frontier defence sentries and observatories with no electricity or insufficient electricity and rich wind resources.
The products are made of high-stability Nd-Fe-B materials. The specific outer rotor magnetic circuit is designed in a way that the products have high generating efficiency, light weight, low starting torque, appealing appearance, easy installation and higher electric performance and use performance than the kindred products.
Under the tenet "Credit, Respect, Excellence and Share" and marketing belief "Quality is the basis of existence, Science & technology are the road of development", the company is devoted to the development of wind solar energy and building international brand. The products of our company are sold to Asia, Europe, Africa, America, etc.
Qingdao Windwings Wind Turbine Co., Ltd. is specialized in green energy industry with bright prospect, so the company would like to cooperate with the friends from all over the world and give green brightness to every friend who cares about environment-friendly type new energy. It welcomes every friend from all circles to Qingdao Windwings Wind Turbine Co., Ltd. for a visit, instruction and business negotiation.

off-grid wind turbine 2000w

wind turbine 2000w
1.CE registered
2.15 years life span
3 :MOQ:1 set wind generator
4.Delivery time: 3 days
wind turine

1. Technical parameter
Model
FZY2K
Rotor diameter
3.2m
blade quantity
3pcs
rated power
2000w
max output power
3000w
out voltage
DC72V/AC220V
Start wind speed
3m/s
rated wind speed
8m/s
Recommended accumulators
12V200AH6PCS
CAN SUPPLY POWER FOR
water pump.TV. washer. Illumine. Fanner. Charge



2. Power curve


3. Parts picture


4. Product advantage
a.
The specific outer rotor magnetic circuit is designed in a new way and are made of high-stability Nd-Fe-B materials
b.
They are in high generating efficiency, have higher electric performance and use performance than the kindred products.
c.
They are in light weight, low starting torque and easy to install.
d.
They also have appealing appearance.

off-grid wind turbine 2000w

wind turbine
1.CE registered
2.Service life: 15-20 years
3 .MOQ: one set wind turbine
4.Delivery time: 3 working days
wind turbine
1. Technical parameter
Model
FZY2K
Rotor diameter
3.2m
blade quantity
3pcs
rated power
2000w
max output power
3000w
out voltage
DC72V/AC220V
Start wind speed
3m/s
rated wind speed
8m/s
Recommended accumulators
12V200AH6PCS
CAN SUPPLY POWER FOR
water pump.TV. washer. Illumine. Fanner. Charge





Blades
Material
FRP (composite material)
Rotor diameter
3.2m
Start wind speed
3m/s
Working wind speed
3-25m/s
Security wind speed
40m/s
Working temperature
from -40°C to +60 °C
Weight
18kg




2. Power curve


3. Parts picture


4. Product advantage
a.
The specific outer rotor magnetic circuit is designed in a new way and are made of high-stability Nd-Fe-B materials
b.
They are in high generating efficiency, have higher electric performance and use performance than the kindred products.
c.
They are in light weight, low starting torque and easy to install.
d.
They also have appealing appearance.


Qingdao Windwings
Wind Turbine
Co., Ltd., located in a nice coastal city called Jiaonan is a hi-tech company specialized in research & development, production, sales and service of medium and small wind turbines and devoted to the development and utilization of natural environmental protection energy such as wind energy, solar energy, etc.






1
Generator
Type
PMG (on constant magnets)
Speed regulation
Yaw& magnetic resistance
Rated output power
2kw
Max output power
2.5kw
Output voltage
DC72V/AC220
Rated speed
320r/min
Rated wind speed
9m/s
Weight
80kg

4.2KW dc motor

4.2KW dc motor
Model:WSG-EM2023
Voltage:72V
Output/Power: 5KW
4.2KW dc motor
Model:WSG-EM2023

Voltage: 72V

Output/Power: 5KW

Rotational speed: 1800r/min

Products structure: output shaft is 6 Teeth internal spline 6×Φ23×Φ28

Custom products can accepted per your specifications

off-grid wind turbine 2000w

wind turbine
1.CE registered
2.Service life: 15-20 years
3 .MOQ: one set wind turbine
4.Delivery time: 3 working days
wind turbine
1. Technical parameter
Model
FZY2K
Rotor diameter
3.2m
blade quantity
3pcs
rated power
2000w
max output power
3000w
out voltage
DC72V/AC220V
Start wind speed
3m/s
rated wind speed
8m/s
Recommended accumulators
12V200AH6PCS
CAN SUPPLY POWER FOR
water pump.TV. washer. Illumine. Fanner. Charge








2. Power curve


3. Parts picture


4. Product advantage
a.
The specific outer rotor magnetic circuit is designed in a new way and are made of high-stability Nd-Fe-B materials
b.
They are in high generating efficiency, have higher electric performance and use performance than the kindred products.
c.
They are in light weight, low starting torque and easy to install.
d.
They also have appealing appearance.


Qingdao Windwings
Wind Turbine
Co., Ltd., located in a nice coastal city called Jiaonan is a hi-tech company specialized in research & development, production, sales and service of medium and small wind turbines and devoted to the development and utilization of natural environmental protection energy such as wind energy, solar energy, etc.





1
Generator
Type
PMG (on constant magnets)
Speed regulation
Yaw& magnetic resistance
Rated output power
2kw
Max output power
2.5kw
Output voltage
DC72V/AC220
Rated speed
320r/min
Rated wind speed
9m/s
Weight
80kg

off-grid wind turbine 2000w

wind turbine 2000w
1.CE registered
2.Service life: 15-20 years
3 .MOQ: one set wind turbine
4.Delivery time: 3 working days
wind turbine 2000w
1. Technical parameter
Model
FZY2K
Rotor diameter
3.2m
blade quantity
3pcs
rated power
2000w
max output power
3000w
out voltage
DC72V/AC220V
Start wind speed
3m/s
rated wind speed
8m/s
Recommended accumulators
12V200AH6PCS
CAN SUPPLY POWER FOR
water pump.TV. washer. Illumine. Fanner. Charge





Blades
Material
FRP (composite material)
Rotor diameter
3.2m
Start wind speed
3m/s
Working wind speed
3-25m/s
Security wind speed
40m/s
Working temperature
from -40°C to +60 °C
Weight
18kg




2. Power curve


3. Parts picture


4. Product advantage
a.
The specific outer rotor magnetic circuit is designed in a new way and are made of high-stability Nd-Fe-B materials
b.
They are in high generating efficiency, have higher electric performance and use performance than the kindred products.
c.
They are in light weight, low starting torque and easy to install.
d.
They also have appealing appearance.


Qingdao Windwings
Wind Turbine
Co., Ltd., located in a nice coastal city called Jiaonan is a hi-tech company specialized in research & development, production, sales and service of medium and small wind turbines and devoted to the development and utilization of natural environmental protection energy such as wind energy, solar energy, etc.





1
Generator
Type
PMG (on constant magnets)
Speed regulation
Yaw& magnetic resistance
Rated output power
2kw
Max output power
2.5kw
Output voltage
DC72V/AC220
Rated speed
320r/min
Rated wind speed
9m/s
Weight
80kg

off-gride wind generator (300W-5000W)

1,It looks beautiful,
2,high performance;
3,start in low wind speed,
4,efficient, low noise ,
5,maintenance free
Characteristic:
It looks beautiful, high performance, start in low wind speed, efficient, low noise , maintenance free, strong ,made of high quality aluminum alloy and stainless steel, c rust prevention and corrosion attack, so it can be used in windy and dusty, wet environment.


Afford:
Lighting, TV set, fanner, washer, refrigerator, electric pan.


Nangtong Mailong Energy Equipment Co.,Ltd
Model
MLH-300H
MLH-300L
MLH-500
MLH-1000
MLH-2000
MLH-3000
MLH-5000
Blade materials and No.
Enhanced FRP
Rated power(w)
300
300
500
1000
2000
3000
5000
Rated wind speed (m/s)
9
9
9
9
9
9
12
Rated rotate speed (r/min)
400
400
400
280
280
280
225
Startup wind speed (m/s)
2.5
2.2
2.5
2.8
2.8
2.8
3
Working wind speed (m/s)
2.8
2.5
2.8
3.2
3.2
3.2

Survived wind speed (m/s)
35
35
35
35
35
35
45
Working voltage (V)
AC24
AC24
AC24
AC48
AC96
AC240
DC48
Battery voltage (V) /Capacity (Ah)
12/150
12/150
12/150
12/150
12/200
12/150
12/200
Stop method
He Jia unloading electromagnetic brake
He Jia tail brake unloading
Weight (excluding tower)
17.5
18.5
19
35
39
45
115
AAA Tower height (m/kg)
6
6
6
6

offer Sawdust Briquette Machine * Really easy to use

offer Sawdust Briquette Machine * Really easy to use
1.CE Certification
2.Hot sale in Europe
3.High quality
offer Sawdust Briquette Machine * Really easy to use
Sawdust Briquette Machine can make stick shape wood briquette of different diameter and different shape from agro-forest wasted
Prospect of Briquette Machine:
Due to the rapid increase in the need of energy source, more people start to become interested in Biomass Briquette business. Biomass Briquette are Renewable, Eco-friendly Energy especially for agricultural countries.

Biomass Briquette investment is a best project to generate revenue from agro-forestry waste and to produce Green Energy to protect the global environment. The awareness of using Eco-friendly & Non-conventional Bio-coal / Bio-fuel is increasing day-to-day due to the increasing of the conventional fuel cost

This plant can make stick shape wood briquette of different diameter and different shape from biomass and agro-forest waste.

Raw Material to make Biomass Briquette Machine:
Any type of Agro-Forestry waste can be used. But the Moisture Content Should be Less than 12%, grain size is below 5×5mm.

Groundnut-shell Sugarcane residue Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Rice Husks Forestry wastes Wood Chips and many other Agro wastes.

Biomass Briquette Machine:
This Biomass Briquette Screw Press equipped with automatic temperature control system are designed to produce high density wood briquette from biomass. The motor can be 11kw/15kw/18.5kw-3phase-380v-50hz electrical driven motor. This machine can be operated 16 hours per day. The extruded wood briquette can be used as fuel for briquette boilers or boilers for heating. Please note: during briquetting process, there will be some smoke from the briquette machine that have to be expel to atmosphere.

offer renewable fuel * New energy*Min. calorific value 4500 Kcal/kg

biomass fuel
no pollution
green product
develop renewable resources
Low-carbon Living

Diameter:
6-10mm
Length:
10-30mm
Ash:
1%-3%
Density:
1.1-1.4 g/cm3
Max. Moisture:
5%-10%
Min. calorific value:
≥4500 Kcal/kg (≈20MJ/Mg)


P
AYMENT
50% of total contract value shall be paid by the Buyer to the Seller as down payment by telegraphic transfer within one week after signing the Contract.
50% of total contract value shall be paid by the Buyer to the Seller by telegraphic transfer upon receiving scanned Bill of Lading from Seller.

oil casing pipe

1. We manufacture oil casing pipe
2. Size: 4-1/2"-13-3/8"
3. API 5CT certificated
4. Market: Mid East, Africa, Europe, Asia
Oil Casing Pipe Specifications
Out Diameter:
4-1/2”--13 3/8"
lb/ft
4-72
Length
R1. R2. R3
Thread
PTC, STC, LTC, BTC
Technique
hot rolled
Thread protector
Plastic inside and steel outside with the right threads
Outside painting
Black painting on the body with color rings at the ends according to API 5CT Standard
Marking
API 5CT Standard
Production Lines
three lines
Productivity
600,000Tons per year
Quality control
API(AMERICAN PETROLEUM INSTITUTE) standard
Third party inspection supported
SGS, BV
Delivery time
30 days
Contact person
Ms. Catherine Li
Tel
0086-635-8726789
Fax
0086-635-2935599
Mobile
0086-15806983019
Toll Free Number
001-888-5518636

oil cooler

Top1 brand of Plate fin heat exchanger in China, Exellent QC system, good design on customer's need.
flow (l/m)
20-120
Capacity (kw)
10-100
Working pressure (MPa)
1.6
Max working Temp (C)
85

oil drill pipe

Pipe body:TPCO Steel
O.D:2-3/8"-5-1/2"
Grade:G105,S135,E75,X95
Certificate:API 5D,ISO 9001,API Q1
Petroleum Drill Tools Specification
Size
Nominal
Steel class
Wall Thickness
UpsetConsult Exegesis
in.
mm
1b/ft
kg/m
in.
mm.
2 3/8
60.3
6.26
9.32
EXGS
0.280
7.11
EU
2 7/8
73.0
9.72
14.48
EXGS
0.362
9.19
EUIU
3 1/2
88.9
8.81
13.12
E
0.254
6.45
EUIU
3 1/2
88.9
12.31
18.34
EXGS
0.368
9.35
EUIU
3 1/2
88.9
14.63
21.79
E
0.449
11.40
EUIU
3 1/2
88.9
14.63
21.79
XGS
0.449
11.40
EUIU
4
101.6
12.93
19.26
EXGS
0.330
8.38
EUIU
4 1/2
114.3
12.24
18.23
E
0.271
6.88
EUIU
4 1/2
114.3
14.98
22.31
EXGS
0.337
8.56
EUIU
4 1/2
114.3
18.69
27.84
EXGS
0.430
10.92
EUIU
5
127.0
14.87
22.15
XGS
0.296
7.52
IU
5
127.0
17.93
26.71
E
0.362
9.19
IEU
5
127.0
17.93
26.71
XGS
0.362
9.19
EUIEU
5
127.0
24.03
35.79
E
0.500
12.70
IEU
5
127.0
24.03
35.79
XGS
0.500
12.70
EUIEU
5 1/2
139.7
19.81
29.51
EXGS
0.361
9.17
IEU
5 1/2
139.7
22.54
33.57
EXGS
0.415
10.54
IEU
·Chemistry composition
Steel class
Chemistry composition
P≤
S≤
E-75
0.030
0.030
X-95
0.030
0.030
G-105
0.030
0.030
S-135
0.030
0.030

oil refining equipment

1.government project proposals for investment
2.ISO9001
3.without pollution
4.Energy saving
One Advantages of the Streamlined Equipments(nlln-2200*6000)
1. Conducting comprehensive disposal to rubber tyres can produce black carbon and tyre oil at the same time.
2. Every set of equipment is composing of parts:
a, host (with shell body machine),
b, sub-air package
c,cooling system (tank cooling, coil type cooling, tubular cooling, etc, can choose)
d, cooling tower
e, oil tanks
f ,heavy oil tank
g, water tank (safety system),
h,gas combustion system (including the air blower, gas gun), etc
i,flue condenser
j,sulfur removal system (3) with sprinkler head desulphurization
k,dregs system (automatic sealing dregs)
l, draft fan
m, reducer
n, electric control cabinet
3. Domestic pioneer of this technology
a. The producing process of the whole facility is operating under confined state, which has good environment prevent effectiveness.
b. The design of the key equipment- split processor overcomes the disadvantage of vertical flat-bottom split processor at home, such as asymmetry heated, easy split, low yield and short life-time etc. The mainframe adopts horizontal, revolving 360
o
structure-1.2 R/M.
c. Safety feed-in and discharge system. The highest feed-in quantity of nlln-2200*6000is 8-10ton/day. The highest of combined equipment is 24-30ton/day.
d. Effective gas heating system. In the process of producing, when the gas was heated to 150
o
, it will produce a large amount of unliquefied gas-CH
4
--C
4
H
8 ,
which can’t be formed at normal temperature, normal pressure. If those gases have been fully burning by the specific designed gas nozzle, they can produce a great amount of energy and economize resources.
e. Fuel dust catcher system, which match with Bidirectional water impact Cyclone dust Room to ensure the discharge amount of fuel outlet meet national standard.
4. Guarantee:
All the series types of our equipments can enjoy perfect after-sale services: 1 year’s Guarantee time, life-time maintenance. These can solve all the customers’ worries.
Two main technical characteristics
1. Key equipment- split processor adopts horizontal revolving structure, which could catalyst heating split techniques.
2. Perfect with environmental prevent devices. Such as waste gas burning machine and fuel dust catcher room.
3. Properly designed, advanced manufacture process, highly automated complete safety device.
4. Abroad usage;
Three Application range of revolving processor
1. Industrial mixed scraped plastic, allow for existence of PP, PE, PVC.etc at the same time.
2. Wasted oil. Such as: wasted diesel oil, spend oil residua etc
3. Scraped rubber tyres
4. Wasted cable husk. (suggest sparing out Chlorine first and then refine oil)
5. Wasted crude oil
6. Wasted PMMA
Four Process description
Feed the scrap tyres directly into the revolving-normal pressure split processor, catalyze, and heated, distillate oil vapor, transfer the oil vapor. Then through condenser, the liquefiable phase condensed to tyre oil. The unliquefiable ones come through gas system, and were burnt in the bottom of the processor. The black carbon after cooling will be discharged automatically through the outlet
Five. Safety
The main equipment is of high safety. The phase of the unliquefizable waste gas produced during the process is alkyl from C
1
to C
4
, which is dangerous when burning directly. In our process, it is transferred first through a water close device and a safety device- burning air muzzle. Before burning, we should ensure the safety of production.
Six . Environment Protective
Dispose waste gas, liquid, and residua in the process:
1.
Waste gas
: Transferred through two safety device: water close burning air nozzle. Fully burnt, not only eliminated pollutant but also minimized the quantity of fuels. For smoke dust discharge, we apply series machines of ZTC Desulphurization and dust remover which could control the smoke dust discharge amount meet relative standards of GB-2001.
2
. Waste liquid
: Produced waste acidic water in the process of oil disposing (50kg process from 1 ton of oil easy to process for small quantity). Counteract the liquid by alkalescent liquid solution. After three stage of filtration, the litmusless waste water was introduced to evaporator(use the heat of the flue of main processor as its heating resource)
3.
waste solid
:The residua left after the catalyst splitting of tyre is black carbon. No waste is solid exist.
Seven. Economical benefit analysis
Equipment technology parameter
Project
Content
Equipment model
nlln-2200*6000
nlln-2600*6000
nlln-2800*6000
Material
Waste rubber/tyre
Waste rubber/tyre
Waste rubber/tyre
24 hours’ process loads
8-10ton material
10-12ton
material
12-15ton material
24 hours’ Oil produce mass
4.5ton
Bunker oil
5.4ton
Bunker oil
6.8ton
Bunker oil
Coolant conditions
Water
Water
Water
Main engine size (long×width )
6000*2200
6000*2600
6000×2800

oil&amp;gas applied garment

applied in oil&gas, can be made as one piece coverall or shirt&pants. high visibility strips all over the garment to highlight.
NomexIIIA Work suits

Nomex IIIA fabric 4.5oz or 240gsm FR cotton,navy blue color.
One action folding along the middle back to facilitate body movement and enhance appearance
Stitched with Nomex sewing thread
Hemmed sleeves
Ttwo chest swing pocket, two set-in rear pockets.
Rugged safety stitched construction with felled inseams

4.2KW dc motor

4.2KW dc motor
Model:WSG-EM2033
Voltage:72V
Output/Power: 5KW
4.2KW dc motor
Model:WSG-EM2033

Voltage: 72V

Output/Power: 5KW

Rotational speed: 1800r/min

Products structure: output shaft is 6 Teeth internal spline 6×Φ23×Φ28

Custom products can accepted per your specifications

ore fines briquette press

briquette press
1.higher steel strength
2.high pressure
3.fine wear resistance
Ore fines briquette press introduction:
The equipment decents with higher steel strength,
where the rollers are made of abrasion proof ally through forging, and the bearing adopt shafts of rolling mills, the main bearings are made of DIA 40cr through forging.
Relevant quenching and tempering and hydraulic system are mached by standards manufacturers.
Partial list of materials presently being briquetted:
coal powder
ore fines
furnace dust
steel rolling skin
iron fines
limestone
ash
metal powder
Dried Sewage Sludge
Steelwork dust
manganese

organic fertilizer machine

organic fertilizer machine
1. Taper roller pellet machine
2. CE fertilizer machine
3. Automatic lubrication system
organic fertlilizer machine

1. Our organic fertilizer machine(Patent NO:200720157337.9 ) with CE certificate adopted the techonology from Germany( KAHL )13 years ago. And our patent--Taper Shape Rollers reduce the friction between flat die and rollers, so the lifetime of the die and rollers lengthened a lot. It is your best choice to press biomass pellet, such as wood pellet, straw pellet, rice husk pellet and so on.

2. For SKJ3- Series organic fertilizer machine, we have the oil pump matched with the machine, which can lubricate the rollers automatically when they are working.

3. Because of the high pressure and stable operation.


4. The following specifications about the capacity is for wood pellet, if the machines are used for making feed pellets or fertilizer pellets, the capacity will be doubled or three times.

Model
Output(kg/h)
Power (kw)
Diameter of pellet (mm)
Weight(t)
Size(mm)
Note
SKJ2-200
100-160
11
Φ4-6
0.28
1300×500×850
Diesel engine and motor dual-use

SKJ2-250
160-260
15
Φ4-6
0.5
1400×600×1000
SKJ2-300
300-500
30
Φ4-8
0.76
1860×670×1600
SKJ3-350A
400-600
37
Φ4.5-10
2.2
1900×850×1700
Gear rotation
Auto-Lubrication systerm
SKJ3-450A
500-800
55
Φ4.5-10
4.3
2300×1100×1900
SKJ3-550A
1000-1500
90
Φ4.5-12
5.5
2350×1000×2050
SKJ3-800
1500-2500
130-160
Φ4.5-12
6.8
3200×1235×2700
SKJ4-1200
3000-5000
280-320
Φ4.5-15
19
3800×1700×4200
SKJ300B
100-200
11
Briquette diamete: Φ6-25
Press size:
20×30
0.8
1170×420×850

SKJ3-350B
200-500
30
2
1500×1600×1750
Auto-Lubrication systerm
SKJ3-450B
400-700
45
3.5
1980×900×1700
SKJ3-550B
600-1000
75
2.8
1575×2300×1950

If you are interested in our organic fertilizer machines, please do not hesitate to contact us!

Best regards
Wendy wang
Tel: 0086-531-83483996
MP.: 0086-18678866202
Fax: 0086-531-83483378

organic waste treatment

organic waste treatment
10 year over this field
no smell leak out safe

organic waste treatment
The system is
composed of
one or several 100 m3 PUXIN biogas plant, pipe routes, gas purify devices and gas appliances or biogas generator.


The system can be used for:

Disposal of sewage sludge for waste water disposal stations;

Disposal of wastes for medium size livestock farms

Disposal of sewage and food waste for departments, factories and schools etc.

Disposal of waste water and solid waste for food processing plants and brewing plants




Medium size PUXIN anaerobic digester biogas plant system has the

following features:

High reliable;

Wide range of application;

low maintenance cost;

Durable;

outdoor bottle

outdoor bottle
Against blow-out,Eco-friendly,high resistant temperature,comprition price,have abeautiful shape,good quality.
outdoor bottle
Kettle, cups, plastic specialized manufacturers

supply products as follows:
(according to use classification) sports bottle, space cup, hiking water bottle, outdoor water bottle,
travel kettle, gift cup, advertisement cup, plastic cup, cup, plastic water bottle, bicycle water bottle,
children bottle, students water bottles, advertising water bottle, water bottle

(according to the material classification) PE sports water bottle, PP sports bottle, PVC sports
bottle, PC bottle, TRITAN kettles, PET bottle, BPA FREE water bottle, BPA FREE Water Bottle
Model



Space Cup health characteristics:
strong explosion-proof, impact resistance, high temperature, leak-proof design to ensure leak-free!
look beautiful, generous, fashion, environmental protection, the water pot by SGS testing, in line
with national.
Instructions:
1. This product material has met the U.S. Food and Drug Administration (FDA) standards for testing; 2. Within the annex may remove the plastic grid can control the amount of drinking water;
3. To use before you are washing with a mild soapy water;
4 . for dishwasher cleaning;
5. removed the plastic ring and cap immediately after microwave
6. water bottles filled with carbohydrate-containing beverages, please carefully open the cap;
Warning: ere are small parts, please under the guidance of adult use. For the object:
for outdoor sports, recreation, mountain climbing, travel, business office, corporate promotional activities.

New marketing programs: I have plants to meet the different levels of customer demand, order quantity conditions are some of the products has been reduced to 1000 can be ordered, color, uniform standards by the Division I colors, welcome to my friends advice, to discuss cooperation matters

outdoor junction box PV-TH1109-6,180-380W

outdoor junction box
1.Power Handling:180-380W
2.Rated Current:14A
3.TUV approved

outdoor junction box
PV-TH1109-6
Power Handling
180-380W
Rated Voltage
DC 1000V
Rated Current
14A
Application Class
Class A
Protection Class
Class II
Protection Degree
IP65
Temperature Range
-40°C to 85°C

outdoor power supply wind generator

outdoor power supply wind generator
1.beautiful shade design,long use life
2.high efficiency,low noise
3.anti-wind/sand
outdoor power supply wind generator


MLH-1000(1KW Horizontal Axis wind generator) specification
Rated Power(W)
1000W
Rated voltage(V)
48V
Blade numbers(PC)
3PCS
Blade material
GFRP
Rotor diameter(m)
2.8m
Start-up wind speed(m/s)
2.8m/s
Rated wind speed(m/s)
9m/s
Security wind speed(m/s)
35m/s
Rated rotor speed(r/m)
280r/m
Generator efficiency
>80%
Shell(of generator) material
Aluminium Alloy
Weight of generator(kg)
35kg
MaiLon Wind Turbine Generator
1.Low peed generator, use rare earth
permanent
magnet materials, strong overloading ability.
2.Use high-quality bearings, magnet and other components, the radiation heat is strong demagnetization rate is low.
3. The body is made of high-quality steel pipes or ductile iron,have a good anti-corrosion treatment, prevent wind sand, prevent salt spray and other erosion, suitable temperature -40 -60 environment.
4. The professional magnetic circuit design, incising wind speed of 2.5 m / s, lower wind speed you can generate electricity.
5. Rotary body part use a closed transmission slip ring, cable is not enwind.

oxide scale ball press machine

oxide scale ball press machine
1.balls with high capacity through high strength
2.high pressure
3.fine wear resistance
oxide scale ball press machine introduction:
They are mainly applied to three wastes powder, such as oxide scale, precipitator dust, blast furance dust, steel slag, manganese ore powder and al kinds of powders of colored metal industry.

The equipment looks luxurious and decent with higher steel strength,
where the rollers are made of abrasion proof ally through forging, and the bearing adopt shafts of rolling mills, the main bearings are made of DIA 40cr through forging.
Relevant quenching and tempering and hydraulic system are mached by standards manufacturers.

ozone generator water treatment

220V 50HZ
Output: 3g/h-5g/h-10g/h
Dimensions: 3g/h-5g/h 32*25*82 10g/h 37*25*82
purifying rate 98%
60-230 M2
Function:
1) this product of ozone gas has strong effect of catalysis and oxidation, viruses and bacteria.Due to the effect of free radicals to the germs in the ozone gas, the protein would be dissociated and denaturatied, the liveness of nucleic acid and enzyme would be reduced.Than, the germs can be killed.
2) Ozone belongs to the broad spectrum sterilization with a strong exterminate action for all kinds of virus and germs.
3) Ozone would be degradatied and oxidated with the harmful gases such as formaldehyde, carbon dioxide, and with no nontoxic and harmless by-products, it can avoid the secondary pollution.
4) It is considered to be the the international comparison of cutting-edge technology by using ozone to disinfect, dispel the peculiar smell, purify air and the degradation of organic waste gases, which is called to be the one of the four environmental science in 21st century by the experts both in domestic and international.
5) It has the function of fixing time, can be operatored without watching by man.
6) hotel: hotel: the advanced treatment for tap water or well water. degradation for fruit and vegetables and the anticorrosion and freshness to the food. disinfection for the kitchen, dining hall, kitchenware, refrigerator, dish shelf, nursery ground, store room, tableware, bedding, and the cleaning for bedclothes.
7) deratization and insect prevention : The unique odour of ozone can quickly drive the smell smell small animals and insects, like mice, cockroaches, etc., which is sensitive to the smell.
8) Health Promotion: fast restore the oxygen, increase indoor oxygen concentration of oxygen, promote human body cell activation, improve blood circulation and metabolism, prevent disease.
9) convenient for use, can be moved to different rooms for disinfecting and purifying.

palm fruit bunch Briquette Machine

palm fruit bunch Briquette Machine
1.CE Certification
2.Hot sale in Europe
3.High quality
4.Easy operation
palm fruit bunch Briquette Machine
Briquette press Summary
Hongji charcoal/biomass briquette press can process any kinds of agro-forestry wastes into renewable bio-fuel. Biomass briquette press can make 30-80 mm solid, hexagonal or square or round cyclinder solid fuel briquettes.
The briquette materials can be wood chips, sawdust, sugar cane bagasse, branches, rice
husk, rice straw, cotton stalk, cottonseed skins, wood, wood shavings, wood chips, mustard stalk, wheat straw, soybeans husk, coffee husk, sunflower husk, peanut-shell, sugar cane bagasse, maize stalk, palm fruit bunch , paddy straw , tobacco waste, bamboo dust and any other crop wastes.
Biomass briquetting is the process of converting substantial biomass wastes into high density and energy concentrated bio fuel briquettes. Biomass briquettes are one kind of ultimate green energy source of renewable energy. And the biomass briquettes are non-conventional source of energy, renewable in nature, eco-friendly, non-polluting and economical. In the whole process no binders and chemicals are needed, 100% natural ensured. The higher density, the higher heating value, the biomass briquettes calorific value is up to 3000-4000 Cal/kg. Compared with fire wood and loose biomass, the briquettes show much higher heat because of lower moisture and higher density.
Biomass briquettes are widely used in boilers, refractory, chemicals, home heating, etc. They become more and more popular as fuel all over the world.

palm thread processing machine

The palm thread pellets are made by our machines from palm threads.They are good solid fuel with high density and heat value.
The palm thread pellets are made from our machines and special technology.The raw material is raw palm tree threads and fibers,which is common to see in countries like Indonesia and Malaysia,etc.Generally the material is not used in a proper and economical way.Now we get the material sample from Indonesia and make it into biomass fuel with low moisture,high density and high heat value.

We manufactured the machine and explored the technology independently.

1000w wind turbine generator

1000w wind turbine generator
1.ISO &CE registered
2.15 years life span
3 :MOQ:1 set
4.Delivery time:10 working days
1000w wind turbine generator

1. Technical parameter
Power: 1KW
Rotor diameter: 3.2m
Bladesquantity: 3 pcs
Blades material: FRP (composite material)
Rated speed: 360r/min
Rated output power: 1000W
Max output power: 1500W
Output voltage: DC48V/AC220V
Start wind speed:3m/s
Rated wind speed:8m/s
Working wind speed: 3-25m/s
Security wind speed: 40m/s
Speed regulation: yaw& magnetic resistance
Charge control: AIC (automatic intelligent control)
Windturbinetype: PMG (onconstantmagnets)
Working temperature: from -40 to +60 C
Annual average energy production: 2500kWh
Recommended accumulators: 600Ah
Accumulators full charge time: about 8 hours
Tower type: pull wire tubular tower or cone tower(optinal)
Tower height:6m (optional)
Weight: 45kgs (without tower)
CAN SUPPLY POWER FOR: water pump.TV. washer. Illumine. Fanner. Charge

2. Power curve


3. Parts picture



4. Product advantage
a.
The specific outer rotor magnetic circuit is designed in a new way and are made of high-stability Nd-Fe-B materials
b.
They are in high generating efficiency, have higher electric performance and use performance than the kindred products.
c.
They are in light weight, low starting torque and easy to install.
d.
They also have appealing appearance.


5. Packing Picture