Hot oil unit

This hot oil unit is designed to carry out cleanout and heat treatments in land or desert oilfield. It features high efficiency
Brief introduction
The
hot oil unit
is developed by JEREH on the basis of advanced technology and ripe experience of foreign hot oil unit. It is mainly used to carry out cleanout operation.
The main components of the
hot oil unit
adopt international famous brand, which improves the working ability of the equipments greatly. The
hot oil unit
is highly automated and equipped with electrical system, hydraulic system, pneumatic system and transmission system. All control devices are installed on control console and can be operated easily.
The piping of equipment is designed reasonably and can meet the different working requirements, such as high temperature & high pressure, high temperature & low pressure, low temperature & high pressure and low temperature & low pressure.
The equipment features high thermal efficiency. It far exceeds domestic similar equipments in thermal efficiency.
The temperature can be automatically controlled. The equipment provides automatic detection and alarm functions. It stops automatically to assure the safety of equipment and personnel in case of overpressure.

The equipment is designed to carry out cleanout and heat treatments in land or desert oilfield. Its main applications are as following.
Clean the wax and other objects in piping.
Clean piping by pumping hot oil into piping before maintenance of oil well.
Supply pressure directly because a high pressure pump and oil tank are equipped.

Main technical data of
hot oil unit

Chassis
KENWORTH T800/6×4

Chassis engine
CUMMINS ISX-450(450HP@2000RPM)

Chassis transmission
Fuller RTLO16913A 13-speed
Triplex plunger pump
OFM600 3.5 Plunger
Max working pressure
70MPa
Charging centrifugal pump
3×2×13 closed impeller
Rated displacement of centrifugal pump
1800L/min

Fluid supply pump
BOWIE PUMP 3

Rated displacement of fluid supply pump
744L/min
Heater
JB2 oil fired burner
Heat ability
8m Btu/Hr2679.5kw/hr
Fuel
Diesel
Max temperature
121

Volume of liquid tank
10 m3

Net weight
21000kg

Working weight
29000kg
(L×W×H)
Dimension (L×W×H)

11980×2500×3900mm