Discount wind turbine 1000w

Discount Wind Turbine 1000W
1.CE certified
2.Excellent Quality,High efficiency
3.Low price
4.Easy to install,


Discount wind turbine 1000w
Product Parameter:
Wind wheel diameter(m)
3.2
Rated power (W)
1000
Number of blade piece)
3
Max power (W)
1650
Blade materials
GFRP
Start wind speed(m/s)
2.5
Working voltage(V)
DC48/24/AC220/110
Rated wind speed (m/s)
7.5
Top of weight (kg)
75
Working wind speed(m/s)
3-25
Rated speed(r/minute)
350
Security wind speed(m/s)
40
Speed control method
Yaw+Electromagnetic
Charging
Constant voltage
Stop method
By manual
Work environmet
-40-60
IP protection level
IP54
Service life(year)
above 15

Talent
series wind generators composed of rotor , generator, revolving body, tail, tower,
charge controller, batteries and inverter, etc.
1.
Wind wheel :3 blades, streamline airfoil design, high lift drag ratio and excellent
performance. Blade selection of glass fiber, with internal damping strong,dynamic characteristic of good toughness, corrosion resistance and reliable without distortion. Wind wheel and generator with flexible connections, run smoothly without vibration,
low noise.
2.
Generator : Super available waterproof bearing, long - lasting lubrication without
maintenance. Rotor is made of permanent magnet (neodymium iron boron), the impeller revolving drive the generator rotor rotating which produces electricity energy, wind power
generators are different from general motors, It is the low speed motor, reached 100--350 RPM that is able to achieve design power.
3.
Revolving body : Body of revolution is a carrier of wind power generator key component
of wind wheel, generator and tail , is a bearing structures on the top of tower. Body of
revolution makes the wind turbine’s main body around the tower’s vertical axis of 360
degrees horizontallfree rotation. Body of revolution and tail are necessary components in
order to turn direction and aim the wind.
4.
Tail:Tail is made of tail rod and tail plate. Tail plays a important role in adjusting direction
and speed.
5.
Tower : The tower is made of tower tube, the base, wires and fastening parts.Tower
supports the wind turbine’s main bady in a certain height of air,the wind wheel can catch
enough wind energy, Periodic inspect the tensity of wire .using adjustment bolt makes all
wires in accord,and keeps the tower is perpendicular to ground surface..
Wind speed increases along with increasing of height, the small growth of wind speed can
lead to much growth of power. Using high tower in order to reduce the impact of obstacles.
according to the actual situation to change the height of tower.
6.
Charge controller: Charge controller connects with generator and battery,and supplys
electricity to electric equipment. Its function is to rectify ,that is,turning the threephase
alternating current into direct current.
7.
Inverter: Wind generator are direct current through the battery output ,can only be
used for the direct current electrical use, using AC appliances must be configured inverter
to direct current into alternating current ,the inverter role and rectifier role is just contrary,
is the direct current into alternating current.
8.
Battery: (1)Due to the wind intermittent, wind generators have the time of generate
electricity and the time of non-power generation, for the time of non-power generation,in particular, is a continuous period of no valid wind, must configure the storage battery
to be used to prepare an urgent need; (2).Since the instability of the wind,wind sometimes
is big, sometimes small, the wind generator output voltage and current are sometimes big, sometimes small, this poor "quality" electricity for electrical is not used directly. Thus,
regulators must play the role of the battery,transform the poor quality of electricity into
stable electricity to supply for electrical to use. Battery used lead-acid batteries can be.